Any successful self screen replacements? - Nexus 5 Q&A, Help & Troubleshooting

Well after about two years with my nexus 5 I finally got careless and dropped it without it being in my spigen case Glass shattered. The lcd and digitizer still work fine. I ordered a replacement screen that comes with the digitizer fused to it already as I've read its too much work to literally just replace the glass. I've watched a bunch of videos and I'm a tinkerer by nature and it looks rather simple. Anyone here successfully replaced their nexus 5 screen?
Sent from my Nexus 5 using xda premium

I've done both screen and digitizer plus frame, which is literally just switching internals, and I've also don't just the glass, its far easier to replace the screen and digitizer together, make sure u use a hot blow dryer and remove the battery and mother board before applying heat, if u need any further pointers let me know
Sent from my Nexus 6 using Tapatalk

Thanks man! I have a few different YouTube instructional videos saved that I'll be using as reference. I also have a heatgun so I'll be using that. I'll PM you if I run into trouble (hopefully I don't)!
Sent from my Nexus 5 using xda premium

It's really easy, u should be fine
Sent from my Nexus 6 using Tapatalk

I recently put 2 nexus 5's together to make a working one. Just had to swap all the internals over from one with a cracked screen to another with a water damaged motherboard. The whole process was pretty simple just unscrewing and swapping things over really. Mind you I didnt have to replace the frame, which I would say is probably the most difficult part of a screen replacement. If you have already done ur research, just go slow and dont force things too much everything should be sweet.

It's virtually impossible to separate the front glass, digitizer and LCD without destroying them. I've come close but have never been successfully. It's not worth the trouble.y suggestion is to buy a new fre as well. It's a pain to dig all the broken glass off the frame. I'd much rather pay an additional 7 dollars and save the time and avoid picking shardsof glass out of my fingers. A reused frame is rarely like new anyway. There are often issues with seating of the LCD and problems with the adhesive. The nexus 4 was really bad in this regard. I have one, it works and I managed to get the proximity sensor to work, but I'd never do it that way again.
I replaced the screen on my nexus 5 with a LCD that came in the frame. It turned out to be a good choice as my frame was actually broken. It cracked right by the buttons on both sides. I have a second ont thats broken the same way, except the lcd works well enough to use so im waiti g until it dies completely to fix it. The front glass was actually on, but the LCD cracked. It seemed odd that the LCD cracked but not the glass until I had it apart. (I bekwice the digitizer on these is part of the LCD, as opposed to being laminated on the back of the glass)
The replacement went very smooth. I did it on my mother in laws kitchen table. You will need a credit card (to get the battery off) a hair dryer (for the battery) and a small screw driver. Don't use the ones they usually send with the screen, they are bad quality and will chew screws and or break leaving you without a screwdriver in the middle of the repair. Google the d820 service manual and read the disassembly section. Work carefully with plenty of light and be very careful with the tiny connectors. There are some parts that are stuck down, for instance the battery. Heat them with a hair dryer. It's best to hold it in your hand when you do this. If you can hold it, the heats OK, if its to hot to hold, its too hot. Usea credit card to pry up the battery if your changing frames. Heat both the front and back until you can slide the card under the battery.

Thanks the insight guys. Really appreciate it. Times like these make me happy I'm apart of the nexus community lol. Unfortunately I did not buy a new frame so I'll be picking out glass for a while! I just ordered the part yesterday and paid extra for faster processing and shipping. Reviewed a few more videos and manuals today and feel pretty confident. I was going to dish out 500 for the new 6p, but I just don't feel like I'm done with my N5 yet. So hopefully this replacement gives me another 4-6 months with my phone before I finally decide to upgrade.
Sent from my Nexus 5 using xda premium

I replaced a screen on an n4 and n5. Replacing just the digitizer was such a pain on the n4 that I decided to get the frame, lcd, and digitizer pre-assembled for the n5. For me, it's worth it to get everything pre-assembled.

I just got my screen, LCD and digitizer yesterday. I'll be performing the swap today. Wish me luck!
Sent from my Nexus 5 using xda premium

Successful repair! I can't explain how nice it is to have a crystal clear screen again. So refreshing!
Sent from my Nexus 5 using xda premium

Related

[Q] Samsung Infuse Cracked Glass

I have a samsung infuse from AT&T and recently dropped my phone.
The glass is completely cracked; however, the touch screen is working like normal.
Is there a way to replace the cracked glass only?
If it is possible, does anyone have instructions or a guide on how to fix the cracked glass?
Or, would I just have to file a claim with AT&T Insurance?
Thank you!
Your most likely going to have to claim insurance on your phone from my research the glass is not replaceable !!!
Sent from my SGH-I997 using xda premium
Kdog71588 said:
Your most likely going to have to claim insurance on your phone from my research the glass is not replaceable !!!
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Really?
https://www.google.com/search?rlz=1...e&ie=UTF-8&q=samsung+infuse+glass+replacement
Well damn guess you can but I guess it depends upon how brave you are to start ripping into your phone and if your comfortable with small electronics
Sent from my SGH-I997 using xda premium
Either of you go through with this yet? Would be curious to hear how it went...
I've looked around online, and everything I'm seeing says the digitizer, LCD, and outer glass are one fused together piece on the Infuse:
http://www.youtube.com/watch?v=MZI6d59ufSc
Even though eBay sellers have the Infuse outer glass for sale separately, it seems like pulling the glass off of the LCD/digitizer without destroying it is going to be extremely difficult. Even if you get the old glass off without damage, you still need to figure out how to attach the new glass to it.
Then what??????
Sent from my SGH-I997 using xda premium powered by The Dark Knight ICS
Kdog71588 said:
Either of you go through with this yet? Would be curious to hear how it went...
I've looked around online, and everything I'm seeing says the digitizer, LCD, and outer glass are one fused together piece on the Infuse:
http://www.youtube.com/watch?v=MZI6d59ufSc
Even though eBay sellers have the Infuse outer glass for sale separately, it seems like pulling the glass off of the LCD/digitizer without destroying it is going to be extremely difficult. Even if you get the old glass off without damage, you still need to figure out how to attach the new glass to it.
Then what??????
Sent from my SGH-I997 using xda premium powered by The Dark Knight ICS
Click to expand...
Click to collapse
http://www.repairsuniverse.com/samsung-infuse-i997-take-apart-repair-guide.html
This must be the instructions to remove outer screen because I have seen a video to replace the digitizer and screen assembly and it just popped off after removing some ribbon cables. I am waiting for outer screen ,outer casing and battery cover to arrive from China. Cost $30 with shipping. Will look brand new on outside if it works. I'll let you guys know how I make out.
Edit....After removing top glass with razor blade as it is fused to LCD with glue I lost response to touch. Ordered new LCD and digitizer with bezel (plastic frame that screen is attached to and circuit board mounts on) . I am not sure if I could get it to work if I could glue or fuse new top glass back on. Scratched the heck out of it anyways. Live and learn, if anyone else had better luck I would like to know.
I had great luck with mine. I started by heating the outer glass with a blow dryer and used a card from a regular deck of playing cards starting from top to bottom of the screen to get it started. After i got it about half way i didn't even use the blow dryer anymore just allot of playing cards. You have to be extremely careful on the top right of the LCD not to damage the ribbon for the digitzer. I got a few minor scratches on the LCD from shards of old glass but you can only see them if the screen is off and you look really hard. It pretty much looks brand new now. I just used thin double sided tape on the outside edges of the new glass for now as i haven't found a permanent way to hold down the glass yet. I will probably leave it that way so next time it breaks i don't have to go through the long process of separating the glass from the LCD again. In my opinion it was well worth the $10 and the labor to replace just the outer glass rather than the $130-$150 for the replacement LCD/digitizer and outer glass.
Thanks for trying.
cbroadsword said:
I had great luck with mine. I started by heating the outer glass with a blow dryer and used a card from a regular deck of playing cards starting from top to bottom of the screen to get it started. After i got it about half way i didn't even use the blow dryer anymore just allot of playing cards. You have to be extremely careful on the top right of the LCD not to damage the ribbon for the digitzer. I got a few minor scratches on the LCD from shards of old glass but you can only see them if the screen is off and you look really hard. It pretty much looks brand new now. I just used thin double sided tape on the outside edges of the new glass for now as i haven't found a permanent way to hold down the glass yet. I will probably leave it that way so next time it breaks i don't have to go through the long process of separating the glass from the LCD again. In my opinion it was well worth the $10 and the labor to replace just the outer glass rather than the $130-$150 for the replacement LCD/digitizer and outer glass.
Click to expand...
Click to collapse
Hey thanks for trying, braveheart. I'm gonna try that too. Dont have a 100 to spend on the pair.
Can you make a guide of that? I think it will help alot of users. You can get pictures from internet and mark the critical points which will help in separation.
broken screen. Help!!! .
Month back, dropped my phone(2-3 times).
Now stuck with unusable mobile.
Can somebody suggest,where I can get its lcd [email protected]+ digitilizer, on cheap price.

Cracked my screen

Fell my phone from only 3 inches high to the cement ground, and cracked the screen, I just can't believe it! However the good thing is it's just the bottom left part where the back key is
Sent from my One X using xda app-developers app
Bad luck :/ Luckily my phone fell down many times with case and it's not cracked
Mine was bumped off a bench at the gym. Fell about a foot and a half onto concrete with thin carpet cover. Shattered like...er, glass. Had to buy replacement through insurance.
Sent from my HTC One X using xda app-developers app
That's unfortunate. My gf has been really lucky with her falls (5+ car lap to concrete) without a shatter. I guess it depends on the angle.
Sent from my HTC One XL
case really helps ha
Sent from my Nexus 7
ah i thought i would protect it carefully but i was wrong...
Sent from my Nexus 7
yeah maybe mine just hit the corner
Sent from my Nexus 7
I had to replace one through insurance as well....sat down outside at Starbucks and if fell about 26 inches, hit top corner and that was all she wrote. Was still usable but to beautiful of a device to stare at a crack on it.
Needless to say I placed a silicone case on it now
square trade help easy my worry of this happening to me. It would suck to have to re-root and load my roms though
how much does it cost to replace it, and can you do it yourself?
Dropped mine from my lap in the car to the ground. Cracked the top and bottom of the diffuser. Problem is diffuser is bonded to the LCD so I have to replace the whole assembly which sucks very much bad.... Oh and I had the case on it too... Smh
Sent from my HTC One XL using xda app-developers app
I just bought one online for $18 and it took me 15 mins to replace. Very easy.
Sent from my HTC One X using xda premium
heyitsdan03 said:
I just bought one online for $18 and it took me 15 mins to replace. Very easy.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Where abouts? I just smashed mine this morning and it's pretty bad...
I'm still using, not much impact on normal use, just don't like the look of it...
Sent from my One X using xda app-developers app
V_N said:
Where abouts? I just smashed mine this morning and it's pretty bad...
Click to expand...
Click to collapse
When I get to work tomorrow i will post the url of the site.
Sent from my HTC One X using xda premium
V_N said:
Where abouts? I just smashed mine this morning and it's pretty bad...
Click to expand...
Click to collapse
http://www.etechnotics.com/touch-sc...cement-for-htc-one-x-s720e-htc-at-t-logo.html
$17.99 i just bought one im waiting on it to come in the mail and i found a youtube video to show me how to do it lol
For those who have had to replace the screen, does dust now get under it?
I replaced my screen on a few older phones (some replaced by a service, others by myself), and like clockwork after a few months, dust develops under the screen.
I've almost pretty much settled that if my screen shatters, I'll get it fixed and immediately sell it to avoid that.
Best Case ist Otterbox Commuter or Defender
I hate Otterbox Defenders...so bulky & just ugly. I know, theyre for protection, but these new phones like the One X are just uglied up by the big bulky cases.
Anyway, as for the display changing...I just did a couple last week, no picnic at all. The person that said he changed one in 15 minutes I would bet the farm was a bad overexaggeration...unless you do 20 a day you won't even get this baby apart completely to even think about replacing the screen in 15 minutes.
As for $17.99 I haven't looked at the link yet, but I'm betting it's just for the outer glass (touch panel) and not the digitizer/combo assembly. I scoured the net and could only find the touch panel for this price. The combo (touch panel & lcd) as one fused unit I found for about $80, normally around $145 in most of the usual places.
These ship with the touch panel/digitizer fused, so separating them is basically impossible. I've seen a couple of posts where people say they've successfully removed the glass & replaced it only, but I'm guessing it was someone blowing smoke, or their screen has already been replaced with the 2 individual parts that are not fused.
I opted to choose the 2-part deal for one main reason...both of the ones I replaced were in cases, and fell a very short distance & shattered badly. I'm guessing like the OG Evo, there's really not going to be anything you can do to ultimately protect these, so I'm anticipating future screen changes...hence, the unfused 2-part combo.
I got the outer glass for less than $20, and the LCD for $35 both from Amazon. I was pretty thrilled when I got the glass, as the AT&T branding is gone & replaced with HTC instead. (I hate branding, especially since I use mine on Straight Talk)
I think the first one took me about 3 hours to do, the pieces are a horrible blind jigsaw puzzle of dependencies inside the phone, everything is gorilla glued & two-sided taped to death so it's difficult to break down without destroying important, fragile stuff.
After disassembly it wasn't bad with a heat gun to get the screens out, then made sure to clear out all of the adhesive which took quite a while...that stuff is gnarly.
Then I put in the LCD panel, got it situated & used 2 sided tape cut to around 1cm to edge the LCD for the Touchscreen to be laid on it. Added a LIGHT coat of some really strong bonding adhesive to the 4 corners & the middle of the 2 sides to make sure it holds but don't bleed out under the screen.
Laid down the touchpanel & applied firm pressure for a few hours before I reinserted the phone assembly back into the casing.
The beauty ring around the outer screen got a bit ugly on the first one, the second one came out pristine. No issues at all with bubbling under the screen, it's super sensitive & feels like they did brand new again.
The only issue I have, is when you're doing disassembly, one of the ribbons is held down by the very flimsy & fragile piece of circuit tape that the haptic buttons are in, and on both of them, the lights are much dimmer under the haptics than they were before. I don't think there's any way to remove & reinstall this piece without some minor amount of damage or degradation to the lights, but it functions perfectly fine.
All in all, it worked well, and if I have to replace a cracked screen again, it will be a much less expensive, easier fix the second time around. Also pay close attention when reassembling to your antenna wire, it has a connection much like the bluetooth wire you attach to a card in a laptop and if you're not very careful, when snapping back into place it can interfere with your antenna & your phone charging system.
If this helped at all, please click the "Thanks"
androidjunkie71 said:
I got the outer glass for less than $20, and the LCD for $35 both from Amazon. I was pretty thrilled when I got the glass, as the AT&T branding is gone & replaced with HTC instead. (I hate branding, especially since I use mine on Straight Talk)
I think the first one took me about 3 hours to do, the pieces are a horrible blind jigsaw puzzle of dependencies inside the phone, everything is gorilla glued & two-sided taped to death so it's difficult to break down without destroying important, fragile stuff.
After disassembly it wasn't bad with a heat gun to get the screens out, then made sure to clear out all of the adhesive which took quite a while...that stuff is gnarly.
Then I put in the LCD panel, got it situated & used 2 sided tape cut to around 1cm to edge the LCD for the Touchscreen to be laid on it. Added a LIGHT coat of some really strong bonding adhesive to the 4 corners & the middle of the 2 sides to make sure it holds but don't bleed out under the screen.
Laid down the touchpanel & applied firm pressure for a few hours before I reinserted the phone assembly back into the casing.
The beauty ring around the outer screen got a bit ugly on the first one, the second one came out pristine. No issues at all with bubbling under the screen, it's super sensitive & feels like they did brand new again.
Click to expand...
Click to collapse
So theres no issues with the screen changing colors? Like the old digital watches and calculators used to when you pressed the screen? I still haven't replaced mine and looking for an alternative to the 150 for the combo. Not really concerned too much with longevity, I'll get rid of it or redo it in about a year anyway so if it last that long I'm good.

[Q] Screen coating come off

Hi all
I had my Nexus 5 since launch day, but in the last few months I have noticed two rather large areas of the middle of the screen are always oily or "smudged".
If I clean the screen by carefully applying sellotape and then lifting, all oil and smudges are removed, but even after cleaning my hands and using the screen lightly in the same two areas there is always a permanent smudge, and in those areas it feels different, as if the coating is removed.
I have not used any screen protectors or cleaners and I take great care of my Nexus.
It is annoying with the glare.
I haven't had a phone do this before..
I'm going to pop it back to the shop perhaps I just got a unlucky one, but I am wondering about buying a screen protector if this is an issue with the phone..
Anyone else experienced this?
Cheers
Photos?
Sent from my Nexus 5 using Tapatalk
It's happened with the last two nexuses I've had (Galaxy & 4)
Just normal wear and tear.
Sent from my Nexus 5
LaurenceGough said:
Hi all
I had my Nexus 5 since launch day, but in the last few months I have noticed two rather large areas of the middle of the screen are always oily or "smudged".
Click to expand...
Click to collapse
post some clear pics...
Well, I wouldn't say I'm as heavy a user as most on here!! I use it for about half an hour to an hour a day on average. My last phone never did this after 2 and a bit years of heavier usage and I wouldn't call it acceptable for the use I have done. Pretty poor if this is normal for nexus devices, although I couldn't find anything on this relating to the Nexus 5 (only 4, and that wasn't much) in my quick searches online.
I think there must have been a defect in mine which has just got worse over time as I treat this like my baby!
Here is a pic, you see the horizontal lines, almost like a "Z" shape, it appears this is where the coating has come off.
LaurenceGough said:
Well, I wouldn't say I'm as heavy a user as most on here!! I use it for about half an hour to an hour a day on average. My last phone never did this after 2 and a bit years of heavier usage and I wouldn't call it acceptable for the use I have done. Pretty poor if this is normal for nexus devices, although I couldn't find anything on this relating to the Nexus 5 (only 4, and that wasn't much) in my quick searches online.
I think there must have been a defect in mine which has just got worse over time as I treat this like my baby!
Here is a pic, you see the horizontal lines, almost like a "Z" shape, it appears this is where the coating has come off.
Click to expand...
Click to collapse
Test it add a single drop of water on the phone and move the water around by tilting the screen if the coating is still in that area it water should float and move easily without trace over the ear piece with tape for precaution do not submerge the screen or phone
Sent from my Nexus 5 using Tapatalk
My gf had the same problem with old iPhone 4. She went to the shop to try to replace it under warranty, but they refused to do that. They said something external caused it (like some liquid).
I know this is not helpful post...just sharing . I hope that you will be able to exchange it for new one...
Sent from my Nexus 5 using Tapatalk
Tenhi said:
My gf had the same problem with old iPhone 4. She went to the shop to try to replace it under warranty, but they refused to do that. They said something external caused it (like some liquid).
I know this is not helpful post...just sharing . I hope that you will be able to exchange it for new one...
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
There's no point. All phones with this oleophobic coating have this "problem".
2 ways to verify for certain if the oleophobic coating is gone. First, you can put a few drops of cooking oil on the screen, and try to smear it. If the coating is still there, the oil beads up instead of smearing. See here
Second, if you dare, write on the screen with a sharpie/permanent marker. If there's coating, the ink will bead up and can easily be wiped away. If not, ink will dry and can't be wiped unless you use alcohol.
I use an oleophobic screen protector like the one in the video.
I'm suffering with this problem too and I got my Nexus 5 in November. My galaxy s2 lasted 3 years with its coating and still to this day hasn't given me a spot like that.
Sent from my Nexus 5 using Tapatalk
Argh! That must be soo annoying! I guess you were just unlucky that you got a subpar screen on your beast
However, can this issue be tackled by applying on a decent screen protector??
- Swiped from my Nexus 5!
vin4yak said:
Argh! That must be soo annoying! I guess you were just unlucky that you got a subpar screen on your beast
However, can this issue be tackled by applying on a decent screen protector??
- Swiped from my Nexus 5!
Click to expand...
Click to collapse
Yeah screen protector is a different surface but once you remove it the issue is still there on the glass.
Sent from my Nexus 5 using Tapatalk
Oleophobic coatings do come off over time and with use. I never have this problem as I personally can't use a screen without a protector. Like to keep my things in pristine condition. A good glass screen protector will help you forget about your problem though.
I had his issue with my Nexus 4 after only 3 months of use, bought a screen protector to protect what coating I had left. I don't think it's down to a bad screen etc just the texture of some people's hands and the way they use it is different, my coating wore off top left right at the notification but, I'd obviously been consistently putting pressure there.
Sent from my Nexus 5 using xda app-developers app
Mine wore down and I replenished it with this http://www.ebay.com/itm/Fusso-Smart...t=US_Cell_Phone_PDA_Cases&hash=item27de7c859e
Well it's a very poor quality screen if it does this that quickly. My old HTC Desire Z lasted years with no problem and the same use. Maybe I did just get unlucky it seems a few others have the same problem...
I had it replaced by carphone warehouse but their service was useless and it took almost a month to get it changed, the first screen they replaced was covered in scratches all over!! What a disgrace, so now it has had to be opened up twice - never great for a phone and especially such an expensive and new one.
I am now using an Anker glass screen cover which feels a bit better than the standard glass, has all the coatings, is the same hardness if not harder and comes with a warranty + if they screen goes I can just replace it for around £12 without having to send it off for someone to mess up and be without my phone.
I didn't want to use a screen protector but this Anker glass one is crystal clear and does not affect anything, and I'm very fussy.
Had this happen on my S2. I got a Zagg HD screen protector at Best Buy (because they will install it and if it's not perfect they'll open another one and redo it; plus I'm clumsy and attract dust in mid-application) and it worked great for 2 years and counting. I've been itching to go get one on this phone too but keep putting it off. This thread reminded me off what I have to look forward to if I don't.
I found that using a stylus seems to hasten the erosion of the layer, at least when comparing my S2 to my wife's as well as our tablets.
Sent from my Nexus 5 using Tapatalk
Having the same issue here.
Has anyone tried to see if Google will fix it under warranty?
I should hope they would fix it under warranty! Send it back. It's a disgrace for it to happen in such a short time period.
So I finally got around to calling and I was told there wasn't much they can do about it because the phone is still fully functional even with the coating wearing off. I was told to buy a screen protector...
I'm not sure how I feel about this.

Best place to order a screen replacement?

I dropped my nexus 5 getting out if the car and now the glass screen is shattered at a corner. The digitizer seems fin and every where on the screen is responsive.
So I was wondering if there were a place i can order just the LCD screen and without the digitizer/housing.
Sent from my Nexus 5 using Tapatalk
The digitizer and LCD are fused together.. You need to replace them both!
If I were you, I would send it to a LG Service outlet and let them replace it. The ones you order online may or may not work + you need to do everything yourself. However, if you're good at it, then ordering online will certainly save you few bucks!
As the phone is only $350. Spending anything more then $150 won't do it for me as I'd rather buy a new or used phone. I was hoping there was a place to get just the glass part.
Sent from my Nexus 5 using Tapatalk
The only way that makes sense is if you can get a phone that is as good or better than the n5 for $150 or less.
I dropped mine, three days after it was delivered, no case as it had not yet arrived
The corner of the case was dented and the screen shattered but still fully useabIe.
I was wary about knock off spare parts and my skill with glue and tape if I went DIY so I sent mine in to LG service centre. The cost was £114.67 including Special delivery both ways ( Insured, tracked, next day delivery).
The worst part was the waiting, it took them 10 days to give me an estimate of he cost and three more days to get it back to me. It is good as new now and still has warranty.
I've just checked, thats about $190! So I uderstand your dilemma.
B
LReyes66 said:
I dropped my nexus 5 getting out if the car and now the glass screen is shattered at a corner. The digitizer seems fin and every where on the screen is responsive.
So I was wondering if there were a place i can order just the LCD screen and without the digitizer/housing.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
This is Elena from parts4repair.com,we can offer only oem glass for you,(the original one is out of stock now),and I am a new user,so i can't offer the link for you,maybe you will be interested to visit our website,or contact with us by [email protected].
Please notice that:the outer glass lens is without any function of digitizer or display. and only glass replacement is a professional job, and special tools are required, too. By the way, glass and the screen are bonded together, so both separating them and gluing them together are difficult job. Please sure you can do it before order.
Hope can help you,Thanks.
Never try to replace just the glass. You'd need loca glue & a uv light to cure it. The glue could get into other components and totally ruin your phone. And even if by a small chance you can pull it off, it will never be 100 percent. Always replace the whole assembly. - coming from somebody who has tried to replace just the glass.
Lokke9191 said:
Never try to replace just the glass. You'd need loca glue & a uv light to cure it. The glue could get into other components and totally ruin your phone. And even if by a small chance you can pull it off, it will never be 100 percent. Always replace the whole assembly. - coming from somebody who has tried to replace just the glass.
Click to expand...
Click to collapse
you are right,it is very hard to get it done right by people who mostly have no experience,so please think twice before do it if it is first time for you to change it.And we also can offer LG N5 D820 a full screen assembly(front housing cover + digitizer + lcd screen+glass).
I used my old front housing and removed the old LCD and Glass. It was very difficult but it came out working 100%. This has been the 3rd display I have fixed and so far the most difficult. The rest of the parts were really easy though. Just separating the LCD and housing was painstakingly time consuming and dangerous.
Sent from my Nexus 5 using Tapatalk

[Q] Is the glass on this phone strong?

Hi, im thinking about buying this phone because my Nexus 5 battery is horrible, the Z3 looks so good and the specs are good, however, im seeing lots of people saying that the glass on back or front cracks by itself, can you guys please post if your glass has broke and how long you have owned the phone
I have the original z and Z ultra. Had drop the ZU three times and 7 times on the z.
The ZU has not cracked, but the Z back glass did after falling into concrete, the back glass replacement only cost less that around US30.
Sent from my D6653 using XDA Free mobile app
No, the glass is shocking!
107bird107 said:
Hi, im thinking about buying this phone because my Nexus 5 battery is horrible, the Z3 looks so good and the specs are good, however, im seeing lots of people saying that the glass on back or front cracks by itself, can you guys please post if your glass has broke and how long you have owned the phone
Click to expand...
Click to collapse
had my phone for 4 days, dropped a short distance and it smashed like it'd been hit with a hammer! I definitely wouldn't have bought one if I'd realised! Sony customer experience was AWFUL! They've had the phone longer to fix (by weeks!) than I've had use of it! Back to Iphone for me!
The glass cracking thing is pretty rare and mostly the back glass. I would not worry about that. Its like worrying about the LG G3 cracking near the mic or dust under the M8 front camera module, both of which are also extremely rare. If you dig deep enough you won't be able to buy any phone, including the iPhone 6, which has a high defect replacement/exchange rate at T-Mobile due to the sheer volume of sales of course.
czthompson said:
had my phone for 4 days, dropped a short distance and it smashed like it'd been hit with a hammer! I definitely wouldn't have bought one if I'd realised! Sony customer experience was AWFUL! They've had the phone longer to fix (by weeks!) than I've had use of it! Back to Iphone for me!
Click to expand...
Click to collapse
I got the z3. My wife had the iPhone 6 for about 60 hours, dropped it once and the screen was completely shattered. Shards fell out. Every phone can break when you drop it once.
bump
I've dropped mine onto marble tiles from a metre about 4 times and nothing. The glass is fine. All the haters will say it's going to shatter from heat/cold or blowing on it, but it's nonsense.
This phone has a lot more to worry about than cracking. That's one thing I know will not happen.
Seems like the front and back glass are not from 1 manufacturer. Had my phone for a month and noticed several scratches at the back. I think i got this when i put the phone on the laboratory table which was made of ceramic tiles. I carelessly put it and drag it (short distance only) trusting that the glass is strong. The front is pretty strong.dropped the phone several times from my bed to the floor with it's face down and no scratches on the front
Sent from my D6633 using XDA Free mobile app
Yeah, within a week I've already gotten scratches on the back. The front is fine though.
Sent from my Z3
People saying that the front or back cracks by itself and then the screen does not work
107bird107 said:
People saying that the front or back cracks by itself and then the screen does not work
Click to expand...
Click to collapse
People are saying that an omnipotent man sent his son to earth to save us from eternal pain
My front screen is fine. Back cracked on its own a few days after getting it. Got some deep scratchs on the back from sand on table at beach today and general scuff marks from everyday usage. Front is fine; no scratches or anything
Cracks don't seem to be too common though
Slipped off my bed and landed on a plate, back glass cracked from top to bottom, left to right. I only had it for a couple weeks.
Sent from my D6603 using XDA Free mobile app
Does anyone know how much it costs Sony to replace it? They won't say onnthe phone.
Yeah they won't until they see it just in case there is more than meets the eye. LG did the same to me when I dropped my G2 and screen shattered.
Back on topic, the back can be purchased for between $20-30 so at local repair shop it shouldn't cost more than $40-50 if you want some one to repair it for you.
If you want to do it yourself you will need a heat gun to loosen the glue and a suction cup or guitar pick etc to take out the back panel, also you would need to have glue to put the new one in. I forgot to mention, you have to detach the NFC pad from old panel and put it on the new one.
You better just give it to some one to repair it for $40-50 if you are not willing to do the above.
abhinav.tella said:
Yeah they won't until they see it just in case there is more than meets the eye. LG did the same to me when I dropped my G2 and screen shattered.
Back on topic, the back can be purchased for between $20-30 so at local repair shop it shouldn't cost more than $40-50 if you want some one to repair it for you.
If you want to do it yourself you will need a heat gun to loosen the glue and a suction cup or guitar pick etc to take out the back panel, also you would need to have glue to put the new one in. I forgot to mention, you have to detach the NFC pad from old panel and put it on the new one.
You better just give it to some one to repair it for $40-50 if you are not willing to do the above.
Click to expand...
Click to collapse
I am more than comfortable doing it myself. I did it on my Z. I have everything I need including guitar picks. Everything I find basically says that you can't guarantee a water tight case with aftermarket backs. Also if Sony does it, it's water proof again. I just don't know what to expect....$50......$100.....200. If it's a ton than I won't even bother sending it in to find out. I'm wondering if anyone has ever sent in a Z series for back glass?
If you search the forum, I recall someone had it done for $40-50 if I am not mistaken. It will definately will not cost $100, your pushing into display/digitizer assembly territory at that price.
I've had my phone slip off a couch and a tv dinner table onto hardwood floor and each time the phone has been fine. No dents or scratches that I noticed.
Planning to get a cheap back protector so it's not so slippery.
Glass is easy to crack. I accidentally drop my phone from 0.5m high facedown and right bottom corner front LCD was cracked called Sony Center and the price is $250 for the LCD and whole bezel thing. Pain in the A double S
Painful indeed, Corning is advertising their new GG4 as 2x better for impacts, in their ads they show gorillas dropping phones face down lol. I wish we had that.

Categories

Resources