Database Info

My lg dead i think lmao help pls

Ok so the phone is dead it won't turn on it doesn't even want to do the volume up thing nore the volume down cwm mode all i can make it do is connect its omap4430 driver on my old xp machine but it flashes on and off doesn't stay on is there a solution or should i just call lg monday and have them fix it...

Have you tried recovery through LG official programme because that's what I did and it worked brilliantly. I was in the same position yesterday!

vicvamp said:
Have you tried recovery through LG official programme because that's what I did and it worked brilliantly. I was in the same position yesterday!
Click to expand...
Click to collapse
My phone is useless it doesnt turn on and i cannot get it to connect on my pc i can only connect it via the omap4430 driver but that keeps conecting and disconecting all the time.. So when i connect it ti the LG's Official program it says no device found and won't continue i think i have managed to brick it will think twice before using cm7 next time....

lg
its worth keep trying cos I did just the same yesterday. I had to uninstall all the LG stuff completely. I then installed it again from scratch (making sure I didn't have that roll back to version 8 fix running). I downloaded the driver with no phone plugged in. I had to plug my LG in with no battery and plugged in whilst holding vol up and power button (it still wasn't detected). Although no driver came up, when I used the recover phone emergency facility in LG it asked me for the IMEI number. I typed it in and it then found the phone and I was able to recover completely. Sorry if you've done all this already but I had lots of gos and it finally worked as I have just stated. I hope this is of some help to you, I'm not an expert but it worked for me.

vicvamp said:
its worth keep trying cos I did just the same yesterday. I had to uninstall all the LG stuff completely. I then installed it again from scratch (making sure I didn't have that roll back to version 8 fix running). I downloaded the driver with no phone plugged in. I had to plug my LG in with no battery and plugged in whilst holding vol up and power button (it still wasn't detected). Although no driver came up, when I used the recover phone emergency facility in LG it asked me for the IMEI number. I typed it in and it then found the phone and I was able to recover completely. Sorry if you've done all this already but I had lots of gos and it finally worked as I have just stated. I hope this is of some help to you, I'm not an expert but it worked for me.
Click to expand...
Click to collapse
Ok did you use xp or windows 7 currently i have windows 7 x64 but i have an old machine here that runs xp i can use that if needed thanks for your help i will keep trying i want my phone to live...

I used XP I am online all evening if you need anything

vicvamp said:
I used XP I am online all evening if you need anything
Click to expand...
Click to collapse
Oh cuz i was trying on my win 7 with no luck i need to get my other pc out then dammit.. thanks..
One time i connected it it said downloading and it lasted a minute and a half before it said fatal error...

Once again, had a quick look through the forum and you can definitely resurrect your phone like this, the pc does not need to see a driver the lg software recovery package will pick it up. Let me know if you have any problems.

Meemo23 said:
Ok so the phone is dead it won't turn on it doesn't even want to do the volume up thing nore the volume down cwm mode all i can make it do is connect its omap4430 driver on my old xp machine but it flashes on and off doesn't stay on is there a solution or should i just call lg monday and have them fix it...
Click to expand...
Click to collapse
if you can't go to recovery then the phone needs to be sent to LG unfortunately,
couple other users had the same issue and they had to send the phone for service.

so i tried what you said but still the phone is not working i will keep trying thanks for all ur help and baracuda looks like thats what i will have to do now since its not working...

Broken power button maybe?...
My power button died - without that button working you can't power up the phone, go to recovery or connect to PC with LG software.
Does your phone light up when plugging into charger? If it does but doesn't actually boot...you may have a faulty and/or broken power button.
If you are in Australia, Evertec (VIC) do the repairs - including postage it took 5 working days to be repaired

shredman09 said:
Broken power button maybe?...
My power button died - without that button working you can't power up the phone, go to recovery or connect to PC with LG software.
Does your phone light up when plugging into charger? If it does but doesn't actually boot...you may have a faulty and/or broken power button.
If you are in Australia, Evertec (VIC) do the repairs - including postage it took 5 working days to be repaired
Click to expand...
Click to collapse
The power button is fine cuz when i hold power and vol up it tries to connect itself via its omap4430 driver if the power button was broken it wouldn't do that i just know i bricked it when i replaced my card from a 16gb to 32 gb i tried putting my card back still it won't turn on.. I was using cm 7 when i changed cards...

[Q] Bricked Samsung Galaxy 3 (i5801). Need to find a JTAG in Mumbai, India

My phone was running on stock 2.2 Froyo ROM. I first flashed it with CM7 Alpha 8 which is under development. It has some issues so flashed it with Kyrillos ROM based on 2.3. Was still not satisfied so tried going back to stock. downloaded the firmware from Samfirmware.com and started flashing with ODIN 1.81. After the downloading part, the phone switched off and never started. I think i might have flashed the bootloader which i shouldnt have and so my phone is not starting. On pressing power, Powe +home+down or Up button, nothing happens.No lights, no display, no sound.
What all things i have tried:
1. Tried charging the battery for 8 hours and then pressing power button. No go.
2. Power + home + volume down. No go
3. Power + Home + volume up. No go
4. connected the phone to usb without battery. while holding power + home + volume down key, reinsterted the battery. phone does not get detected on computer/odin.
I am pretty sure its a hard brick. If i give it to samsung, they will charge a bomb for motherboard replacement. I need to find a shop in mumbai with JTAG (its a device which can put the bootloader directly on to the processor). After some research i found this address:
Wonder Gallery
Manish Market, 1st Floor,
Shop Number No.27, Palton Road,
Mumbai 40001
Does anyone live or work nearby and can give me this guy's number? i want to confirm before i make a trip (i stay 100 Kms from mumbai). Anybody is vashi does a similar job?

Actually boot loader is a very small file and if flashing is completed then it might not be a brick. Are you sure your battery is charged. I saw in Motorola forums that after a hard brick the device will switch on but show a white screen or something
Edit :Sorry I just saw that battery is not the problem
Anyways did Odin show whether flash was successful or not?
Sent from my GT-I5800 using XDA

I think its a hard brick because files on samfirwire contain bootloaders and you hav messed it.
And as for JTAG,i think ebay or other similar websites should help.
And for the address call just dial,they might have the contact information of the person u mentioned.
Hope this helped

Sorry to break your hopes mate, but a massive fire had broken out at the place you mentioned a few months back. Although most of the restoration work has been done, still I highly doubt that the shops would be up and running so soon! Anyhow, just check with them once before planning your travel.

vaibhavyagnik said:
My phone was running on stock 2.2 Froyo ROM. I first flashed it with CM7 Alpha 8 which is under development. It has some issues so flashed it with Kyrillos ROM based on 2.3. Was still not satisfied so tried going back to stock. downloaded the firmware from Samfirmware.com and started flashing with ODIN 1.81. After the downloading part, the phone switched off and never started. I think i might have flashed the bootloader which i shouldnt have and so my phone is not starting. On pressing power, Powe +home+down or Up button, nothing happens.No lights, no display, no sound.
What all things i have tried:
1. Tried charging the battery for 8 hours and then pressing power button. No go.
2. Power + home + volume down. No go
3. Power + Home + volume up. No go
4. connected the phone to usb without battery. while holding power + home + volume down key, reinsterted the battery. phone does not get detected on computer/odin.
I am pretty sure its a hard brick. If i give it to samsung, they will charge a bomb for motherboard replacement. I need to find a shop in mumbai with JTAG (its a device which can put the bootloader directly on to the processor). After some research i found this address:
Wonder Gallery
Manish Market, 1st Floor,
Shop Number No.27, Palton Road,
Mumbai 40001
Does anyone live or work nearby and can give me this guy's number? i want to confirm before i make a trip (i stay 100 Kms from mumbai). Anybody is vashi does a similar job?
Click to expand...
Click to collapse
now this is what you do! just get another rom..u can get it from xda! reflash using odin! and then wen the phone starts in recovery do a factory reset and if ur sd is partitioned then do a cache partion...i had the same problem but it was solved this way...dont worry...nd after that if u wanna reflash stock rom

snikhils4196 said:
now this is what you do! just get another rom..u can get it from xda! reflash using odin! and then wen the phone starts in recovery do a factory reset and if ur sd is partitioned then do a cache partion...i had the same problem but it was solved this way...dont worry...nd after that if u wanna reflash stock rom
Click to expand...
Click to collapse
How do you think he can flash a rom when it won't even switch on
Sent from my GT-I5800 using XDA

vaibhavyagnik said:
My phone was running on stock 2.2 Froyo ROM. I first flashed it with CM7 Alpha 8 which is under development. It has some issues so flashed it with Kyrillos ROM based on 2.3. Was still not satisfied so tried going back to stock. downloaded the firmware from Samfirmware.com and started flashing with ODIN 1.81. After the downloading part, the phone switched off and never started. I think i might have flashed the bootloader which i shouldnt have and so my phone is not starting. On pressing power, Powe +home+down or Up button, nothing happens.No lights, no display, no sound.
What all things i have tried:
1. Tried charging the battery for 8 hours and then pressing power button. No go.
2. Power + home + volume down. No go
3. Power + Home + volume up. No go
4. connected the phone to usb without battery. while holding power + home + volume down key, reinsterted the battery. phone does not get detected on computer/odin.
I am pretty sure its a hard brick. If i give it to samsung, they will charge a bomb for motherboard replacement. I need to find a shop in mumbai with JTAG (its a device which can put the bootloader directly on to the processor). After some research i found this address:
Wonder Gallery
Manish Market, 1st Floor,
Shop Number No.27, Palton Road,
Mumbai 40001
Does anyone live or work nearby and can give me this guy's number? i want to confirm before i make a trip (i stay 100 Kms from mumbai). Anybody is vashi does a similar job?
Click to expand...
Click to collapse
If you have a paypal account try ebay. Search for USB JIG. It may help you, give it a try. Its not expensive (about 3 pounds). If you are interested tell me to search a good one for you.

kyrillos13 said:
If you have a paypal account try ebay. Search for USB JIG. It may help you, give it a try. Its not expensive (about 3 pounds). If you are interested tell me to search a good one for you.
Click to expand...
Click to collapse
^Even I was searching for the same on eBay India some time back, but couldn't find a single one compatible with our device. All of them were for Galaxy S series devices.
So if am not asking for too much, could you kindly share the link over here (the 3 pound one)?

Here you go: http://www.ebay.com/itm/UnBrick-USB...Accessories&hash=item3a71d8e963#ht_2373wt_952

No paypal
kyrillos13 said:
If you have a paypal account try ebay. Search for USB JIG. It may help you, give it a try. Its not expensive (about 3 pounds). If you are interested tell me to search a good one for you.
Click to expand...
Click to collapse
Dont have a paypal account (infact no credit card ) so cant buy off ebay.com. found a usb jig that said samsung galaxy unbrick jig, tried it, did not work. tried on a galaxy, it worked. Now i dont know if the resistor values in the jig are meant to be same or not but gave it a shot.
Isnt this jig meant for people who have a soft brick, i mean they have a PC-exclamation-mobile icon on screen? Mine does not even switch on.
so can anybody help me out? any jtagers from mumbai? or even india?

vaibhavyagnik said:
Dont have a paypal account (infact no credit card ) so cant buy off ebay.com. found a usb jig that said samsung galaxy unbrick jig, tried it, did not work. tried on a galaxy, it worked. Now i dont know if the resistor values in the jig are meant to be same or not but gave it a shot.
Isnt this jig meant for people who have a soft brick, i mean they have a PC-exclamation-mobile icon on screen? Mine does not even switch on.
so can anybody help me out? any jtagers from mumbai? or even india?
Click to expand...
Click to collapse
ask some of your friends who have a paypal account or credit card.....and pay them via cash

Galxaxy3 gets bricked:
snikhils4196 said:
now this is what you do! just get another rom..u can get it from xda! reflash using odin! and then wen the phone starts in recovery do a factory reset and if ur sd is partitioned then do a cache partion...i had the same problem but it was solved this way...dont worry...nd after that if u wanna reflash stock rom
Click to expand...
Click to collapse
Reply : hey 'Vaibhavyagnik' my phone also gets bricked by samsung repair workers.
Now how this happened: i did root my phone , activated live wallpapers also but after one month i feel my phone is responding slow so, i decided to do factory reset. when i just click on factory reset ..It never starts againwaiting for 30 mins. & did many simple things to start like battery charging etc. It just hang on start up showing logo & model no. but when try to charge it was charging well like on switch off mobile charging....
Then i decided to go samsung service center they told me that if we try to download software it may get dead or may be not.....i thought i wouldn't be & I gave them my mobile and now in return it is dead like your mobile no light,no sound,no charging like a brick.
Now, they are charging me to replace motherboard for Rs.2850/- & i dont want to do that............please help me if you found any solution...call me -09545083283 from Pune.
thanks...Hoping to get my mobile work well again.
---------- Post added at 07:47 PM ---------- Previous post was at 07:24 PM ----------
vaibhavyagnik said:
My phone was running on stock 2.2 Froyo ROM. I first flashed it with CM7 Alpha 8 which is under development. It has some issues so flashed it with Kyrillos ROM based on 2.3. Was still not satisfied so tried going back to stock. downloaded the firmware from Samfirmware.com and started flashing with ODIN 1.81. After the downloading part, the phone switched off and never started. I think i might have flashed the bootloader which i shouldnt have and so my phone is not starting. On pressing power, Powe +home+down or Up button, nothing happens.No lights, no display, no sound.
What all things i have tried:
1. Tried charging the battery for 8 hours and then pressing power button. No go.
2. Power + home + volume down. No go
3. Power + Home + volume up. No go
4. connected the phone to usb without battery. while holding power + home + volume down key, reinsterted the battery. phone does not get detected on computer/odin.
I am pretty sure its a hard brick. If i give it to samsung, they will charge a bomb for motherboard replacement. I need to find a shop in mumbai with JTAG (its a device which can put the bootloader directly on to the processor). After some research i found this address:
Wonder Gallery
Manish Market, 1st Floor,
Shop Number No.27, Palton Road,
Mumbai 40001
Does anyone live or work nearby and can give me this guy's number? i want to confirm before i make a trip (i stay 100 Kms from mumbai). Anybody is vashi does a similar job?
Click to expand...
Click to collapse
REPLY : hey 'Vaibhavyagnik' my phone also gets bricked by samsung repair workers.
Now how this happened: i did root my phone , activated live wallpapers also but after one month i feel my phone is responding slow so, i decided to do factory reset. when i just click on factory reset ,It never starts again i did wait for 30 mins. to get start up my mobile & did many simple things to start like battery charging etc. It just hang on start up showing logo & model no. atleast not brick till that time because when try to charge it was charging well like on switch off mobile charging....
Then i decided to go samsung service center they told me that if we try to download software it may get dead or may be not.....i thought i wouldn't be & I gave them my mobile and now in return it is dead like your mobile no light,no sound,no charging like a brick.
Now, they are charging me to replace motherboard for Rs.2850/- & i dont want to do that............please help me if you found any solution...call me -09545083283 from Pune.
thanks...Hoping to get my mobile work well again.

Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A

about bricked g3
when you connected the phone to usb without battery. while holding power + home + volume down key, reinsterted the battery. phone does not get detected on computer/odin..... was there a beeping sound..? if there was there chances that the bootloader partition might be corrupted...

nikhilsehgal said:
Reply : hey 'Vaibhavyagnik' my phone also gets bricked by samsung repair workers.
Now how this happened: i did root my phone , activated live wallpapers also but after one month i feel my phone is responding slow so, i decided to do factory reset. when i just click on factory reset ..It never starts againwaiting for 30 mins. & did many simple things to start like battery charging etc. It just hang on start up showing logo & model no. but when try to charge it was charging well like on switch off mobile charging....
Then i decided to go samsung service center they told me that if we try to download software it may get dead or may be not.....i thought i wouldn't be & I gave them my mobile and now in return it is dead like your mobile no light,no sound,no charging like a brick.
Now, they are charging me to replace motherboard for Rs.2850/- & i dont want to do that............please help me if you found any solution...call me -09545083283 from Pune.
thanks...Hoping to get my mobile work well again.
---------- Post added at 07:47 PM ---------- Previous post was at 07:24 PM ----------
REPLY : hey 'Vaibhavyagnik' my phone also gets bricked by samsung repair workers.
Now how this happened: i did root my phone , activated live wallpapers also but after one month i feel my phone is responding slow so, i decided to do factory reset. when i just click on factory reset ,It never starts again i did wait for 30 mins. to get start up my mobile & did many simple things to start like battery charging etc. It just hang on start up showing logo & model no. atleast not brick till that time because when try to charge it was charging well like on switch off mobile charging....
Then i decided to go samsung service center they told me that if we try to download software it may get dead or may be not.....i thought i wouldn't be & I gave them my mobile and now in return it is dead like your mobile no light,no sound,no charging like a brick.
Now, they are charging me to replace motherboard for Rs.2850/- & i dont want to do that............please help me if you found any solution...call me -09545083283 from Pune.
thanks...Hoping to get my mobile work well again.
Click to expand...
Click to collapse
No buddy, I havent found any one who does it. I am still trying. will let you know if i find some one.

same thing hapeened to my cell.try this.hold vol key down+home key thn plug in ur charger.and see to it button is on this wil take ur cel into downloading mode.thn flash another rom.it workrd for me.

nick269 said:
same thing hapeened to my cell.try this.hold vol key down+home key thn plug in ur charger.and see to it button is on this wil take ur cel into downloading mode.thn flash another rom.it workrd for me.
Click to expand...
Click to collapse
Tried it, not working

hard luck if hard bricked
if your phone is hard bricked.. jtaging may get you into download mode, but, there also chances that it might lose its imei number after jtaging... my suggestion would be sell it off for parts .. and buy a new one.. that will easier.. repairing it will just keep on losing your money for repairs..... just buy a new and cheaper one like samsung galaxy Y .... it less of a headache... besides android phones are getting cheaper now-a - days....

prasadnaik073 said:
if your phone is hard bricked.. jtaging may get you into download mode, but, there also chances that it might lose its imei number after jtaging... my suggestion would be sell it off for parts .. and buy a new one.. that will easier.. repairing it will just keep on losing your money for repairs..... just buy a new and cheaper one like samsung galaxy Y .... it less of a headache... besides android phones are getting cheaper now-a - days....
Click to expand...
Click to collapse
Dude why suggest to sell a phone with strong development and buy a low legacy device
Sent from my GT-I5800 using XDA

htc 8x software crash

Hey, my cousins windows phone 8x has been bricked and the software has totally crashed..
Now when i press the power button then only vibration is occuring..
And ya that hard reset method power button and volume down button is not working then olso vibration is occuring..
please help..

Rishabhj.official said:
Hey, my cousins windows phone 8x has been bricked and the software has totally crashed..
Now when i press the power button then only vibration is occuring..
And ya that hard reset method power button and volume down button is not working then olso vibration is occuring..
please help..
Click to expand...
Click to collapse
No reply.. Please help.. is there any recovery mode in htc 8x..?

try charging it for an hour first

GDR 2, Bricked my HTC8x
MS/HTC and their crappy implementation of updates.
Not sure if this is MS or HTC fault, I got an update on my HTC8x, I am from India so its not carrier locked.
One moment i downloaded the update on wifi, and after that my phone never started, it always gets stuck at 2 gears screen for ever, i let the phone totally discharge, but that dint help either, even if i recharge i get back to same old 2 rotating gears screen.
Gave it finally to a service center who had no clue and is blaming motherboard problems-guess it is HTC's equal of Microsoft saying please reboot.
I am very disappointed with HTC, they should have pushed their firmware well i advance of MS's GDR 2 update.
Anyone facing similar issues after GDR2 update?

Two gears
Yep! I have exactly that problem after attempting to install the GDR2 update. Gets stuck at two gears screen, and no way to hard reset it seems. I can also get the white screen with the serial number etc., and USB or SERIAL showing up at the bottom of the screen depending on what the data cable is attached to. I don't know what else to do. There must be a way. I'm gonna get on the line with HTC support and ask them what they have to say.
challu said:
MS/HTC and their crappy implementation of updates.
Not sure if this is MS or HTC fault, I got an update on my HTC8x, I am from India so its not carrier locked.
One moment i downloaded the update on wifi, and after that my phone never started, it always gets stuck at 2 gears screen for ever, i let the phone totally discharge, but that dint help either, even if i recharge i get back to same old 2 rotating gears screen.
Gave it finally to a service center who had no clue and is blaming motherboard problems-guess it is HTC's equal of Microsoft saying please reboot.
I am very disappointed with HTC, they should have pushed their firmware well i advance of MS's GDR 2 update.
Anyone facing similar issues after GDR2 update?
Click to expand...
Click to collapse

try to open sim card work great for me wtih htc verizon and foreign country

HTC 8X dead after windows update
HTC 8X dead after windows update. After complete update phone restart automatically and then never power On. i connect the phone with charger but no indication on phone screen. When i connect the phone with PC then it installed some drivers "qualcomm HS-USB QDLoader 9008 COM24".
I try to connect the phone with Windows Phone Recovery Tool but this tool never detect the phone but When i connect the phone with PC, the PC detect the phone and show icon on right side of taskbar

[Q] Need clarifications regarding RMA

I have a nexus 5 32gb black.I was running on latest omni rom and elementalx kernel.Yesterday night i saw an update for faux kernel and so i downloaded it.Before flashing i made a nandroid backup(system,data,boot and efs) ,wiped cache and dalvik cache,flashed the kernel,restarted my phone and I went to sleep. I didnt actually see if it turned on at that time. Now in the morning when i tried to use the phone it was off and when i tried to turn it on its not turning on. I tried charging but the LED light is not glowing. I also tried to restart by holding power button and both the volume buttons for 20seconds. Still no use
Here is more information on my problem
http://forum.xda-developers.com/showpost.php?p=51379115&postcount=3644
and
post 4379 ownwards from
http://forum.xda-developers.com/showthread.php?t=2496506&page=438
So i contacted google and they said if it doesnt turn on they will replace it for free.But since i am now in India they said i would have to get it to states and i have 11 months since i bought the phone to do it. So i will be sending it this weekend. My doubt is how does RMA process work. This is what i understood
1.You contact google RMA team and they send u a link to buy new phone
2.You buy a new phone and they will take back the old phone.
3.Once they verified the phone comes under warranty they will release the money they held in ur card to buy the new phone
Now here are my doubts:
1.What does 'comes under warranty' include.My phone looks brand new. No damage outside.Its only a month old
2.If they manage to turn it on then will they take the money for the phone they send me. Will i end up buying a new phone? or would they just send the old phone back?
3.Will the shipping of old phone be handled by them?
4.Should i ship the old phone first to get the new phone?
5.How much time does it take for the whole process?
6.Am i allowed only to buy the same model or can i order the red one?
7.Can the original buyer only apply for RMA or anyone with the full box set can?
8.Is the bill required?I only have the box and all the accessories
9.Anything else i should be knowing before doing it?
Thanks in advance

Connect your phone to the pc and see what error it shows.
As per the RMA process I bought my device from Indian play store and know about their process but its differenent from that of the states.
I have a general Idea about how it works in the US but it will be better if someone from there only could explain you further.
.
Anyways if your phone is not gettimg on they would also not be able to detect what happened with it.

varuntis1993 said:
Connect your phone to the pc and see what error it shows.
As per the RMA process I bought my device from Indian play store and know about their process but its differenent from that of the states.
I have a general Idea about how it works in the US but it will be better if someone from there only could explain you further.
.
Anyways if your phone is not gettimg on they would also not be able to detect what happened with it.
Click to expand...
Click to collapse
I tried conntecting it to PC but there is no change.Its not even getting detecting in any of the laptops. Ill try using wug's toolkit today.Day after im sending it to US

aswinrulez said:
I tried conntecting it to PC but there is no change.Its not even getting detecting in any of the laptops. Ill try using wug's toolkit today.Day after im sending it to US
Click to expand...
Click to collapse
Connect it to the pc, keep pressing the power button and then go to the device manager on the pc and see what it shows.
Do you get a notification sound on pc when u connect phone to PC.
looks like a hard brick in ur case but this thing will confirm it.

varuntis1993 said:
Connect it to the pc, keep pressing the power button and then go to the device manager on the pc and see what it shows.
Do you get a notification sound on pc when u connect phone to PC.
looks like a hard brick in ur case but this thing will confirm it.
Click to expand...
Click to collapse
I already tried it.Holding power button..holding vol- and power button, vol+ and power button vol+and vol- with power button with phone connected to PC..without connected..still no change and pc never made any sound

One mini with bootloader fail. Still alive but not boot up accurately

Hello to all.
I tried to find an answer for my troubles here by a few hours but unfortunatelly i didnt. So I wonder to find help here thanks to XDA specimens society.
Problem symptoms
1 I bought One mini in USA. Seller provided a photo with bootloader screen which I attach below.
2 When received device, it didnt boot up at all. Only a HTC logo appeared at white background and screen began black.
Than when I press a power button, a touch buttons under screen flash 10 times and stop. Again press of power button gives one short vibration and nothing later happens.
I noticed that alu cover at down side (battery area) becomes warm and it is working till battery power goes to 0%
3 When "working", mobile is detected by Windows system connected by usb. It show mass storage, modem and not recognized device.
4 Also it shows a battery charging animation if power button was not pressed before and battery is charged from 0%.
After a two weeks in my desk it still shows 99% what means that battery is mint condition and mobile is not working when not powered on before.
Serviceman said that I have broken bootloader and it should be repaired.
Finally I found out that I can install a new ROM.
So I downloaded a
drivers (recommended here at another article)
TWRP recovery file 2 7 0 5 m4kk
customized Rom by CodenameLungo version CM 11
What I should do now? What tools install? How to putt all these into phone memory if I have not acces to bootloader screen?
If you know article which solve my problem than I will be thankfull for a link.
I know that for most of you these questions are stupid but I m not a pro and will be thankfull for a little help
THX in advance for all who will try to help me.

LukeKaz said:
Hello to all.
I tried to find an answer for my troubles here by a few hours but unfortunatelly i didnt. So I wonder to find help here thanks to XDA specimens society.
Problem symptoms
1 I bought One mini in USA. Seller provided a photo with bootloader screen which I attach below.
2 When received device, it didnt boot up at all. Only a HTC logo appeared at white background and screen began black.
Than when I press a power button, a touch buttons under screen flash 10 times and stop. Again press of power button gives one short vibration and nothing later happens.
I noticed that alu cover at down side (battery area) becomes warm and it is working till battery power goes to 0%
3 When "working", mobile is detected by Windows system connected by usb. It show mass storage, modem and not recognized device.
4 Also it shows a battery charging animation if power button was not pressed before and battery is charged from 0%.
After a two weeks in my desk it still shows 99% what means that battery is mint condition and mobile is not working when not powered on before.
Serviceman said that I have broken bootloader and it should be repaired.
Finally I found out that I can install a new ROM.
So I downloaded a
drivers (recommended here at another article)
TWRP recovery file 2 7 0 5 m4kk
customized Rom by CodenameLungo version CM 11
What I should do now? What tools install? How to putt all these into phone memory if I have not acces to bootloader screen?
If you know article which solve my problem than I will be thankfull for a link.
I know that for most of you these questions are stupid but I m not a pro and will be thankfull for a little help
THX in advance for all who will try to help me.
Click to expand...
Click to collapse
Do you know how to enter bootloader? When the phone is off, you hold the Volume Down Button and the power button until phone boots up (several seconds). If you can access bootloader this way, we have a chance to help you out.

Yes I read about this method. Unfortunatelly it didnt work. Or i tried power+vol up.
Today I visited another specialist and left it for diagnostic purposes. They suppose that bootloader is damaged and should be reconstructed (if I can name it this way).
They were listening to me carefully before said that wold try to connect it with computer.
I hope they know what to do. Will call them on Friday and post here what s going on in their opinion.

LukeKaz said:
Yes I read about this method. Unfortunatelly it didnt work. Or i tried power+vol up.
Today I visited another specialist and left it for diagnostic purposes. They suppose that bootloader is damaged and should be reconstructed (if I can name it this way).
They were listening to me carefully before said that wold try to connect it with computer.
I hope they know what to do. Will call them on Friday and post here what s going on in their opinion.
Click to expand...
Click to collapse
OK. Good luck with it.

Bootloader was reconstructed and now it is running to the boot menu. But serviceman has a problem with flashing ROM. He said that during instalation system cant rebuild certificate and all proces fails at 3%.
May anyone point me any link with instructions what should be done at this situation? We have a deal that on Monday i take mobile back, even if rom will not be flashed correctly...
He confirmed that this phone comes from ATT broadband and is not sure if that change anything or not.
Also suggest that previous owner tried to modify ROM by himself and thats why bootloader was damaged...