Database Info

Help! Stuck at Splash Screen / Battery damage?

Hello ppl,
since 2 days I've got a big problem with my Polas (at all XDA Orbit 2)
Ok first the bad story. My device did take a little shower and had water in it, which seems to be dried out now.
First, you all should think there is nothing to rescue here anymore.
BUT after the first problems (i will tell you some lines below), later on my device got working again. It worked for nearly a whole day.
And then the same problems as before came back again and now I'm stuck on it.
Here is the scenario:
- Without Power Plug: I turn on the device. It boots up as always. When boot is finished and coming to Windows Mobile, the device tells me "low power" and shuts off directly
- With Power Plug: I turn on the device. Showing the o2 Splash Screen. And that's it. Not even the ROM Version Numbers are showing up. When I take out the Plug after a while, XDA just turns off. Oh and the orange LED is lightened.
I can also plug it in while the XDA is off and it shows the orange LED, so you should think it's getting power.
But it doesn't when I try it afterwards without the Plug.
When I boot up without the plug, and plug it in after the Splash Screen, it's the same behaviour as on the scenario "Without Power Plug", it doesn't recognize that the plug is in or is not getting power I don't know.
So why was it working for one day? I don't get it!
You think that maybe only the battery is damaged? But why was it working?
I hope this text is not too confusing and maybe somebody is able to help.
I'm dying without my lovely device.
Oh and yes, i did try a hard reset.
I think the biggest problem for me is, that the device doesn't boot when the plug is in. That is totally weird from my perspective.
Thanks in advance!
gmc

Weird! I am able to flash the ROM. But still the same ;( What the hell?
While flashing the ROM there was no sign of a not working battery.
I'm confused!
Update: Re-Flashed O2 Rom and also tried udK Diamond. Flash is always successful but behaviour doesn't change or get fixed ;(( This can't be true.
Well one question... when the version numbers show up on the Splash Screen what is the "G"-Number? It looks a bit weird, "25.69.30.05H"
Maybe that part of the ROM is down?

gmc said:
- Without Power Plug: I turn on the device. It boots up as always. When boot is finished and coming to Windows Mobile, the device tells me "low power" and shuts off directly
Click to expand...
Click to collapse
I had this problem too, so did some other guys, Check out this thread:
http://forum.xda-developers.com/showthread.php?t=381442
Don't know how/if others managed to solve it but in my case only the replacement of my motherboard (under warranty) solved it.

satfly said:
I had this problem too, so did some other guys, Check out this thread:
http://forum.xda-developers.com/showthread.php?t=381442
Don't know how/if others managed to solve it but in my case only the replacement of my motherboard (under warranty) solved it.
Click to expand...
Click to collapse
Thanks for the link. Will check it out. As there is no more sign of water damage on my device, i hope i can use the warranty too.

[Q] My tablet seems to be bricked?

Hello people!
First of all; thank you very much for your time and effort in developing ROMS for all of my android devices. Keep up the good work :good:
Now, I just bought the galaxy tab 2 10.1 Wifi (p5110) a month ago. Naturally I didn't like the bloatware Samsung shipped with their default ROM.
So I started flashing some custom ROM's. All went flawless until yesterday.
I guess it's my own fault, but here's my situation:
Yesterday, in order to install the Zap Blaster rom, I installed TWRP.
Here is where i think it went wrong:
I Wiped the /system partition and then rebooted the device. Naturally it wouldn't boot up anymore. But I wasn't able to shutdown the device anymore and enter the Recovery (or so I may thought).
My next action was to drain the battery, in order to completely shutdown the device. But now it only shows a battery with a loading indicator.
I charged the device for 8 hours but it still only shows the battery with the loading indicator. This screen appears when I connect the tablet to a power source. I can then "hard"-shutdown the device, by pressing the power button for 10 secs.
Otherwise it isn't responding at all.
When I connect the device to my computer, it shows up as a omap4430 device, but it quickly disappears. Only to show the device again, and so on.
Can I save my tablet? Or do I need to send it to the Customer Service and pay for my "sins"?
Like to hear from you, and thanks in advance for your time!
Greetings!
P.S: Sorry if my English isn't that good, I did my best effort!
P.P.S: I know my tablet isn't complety bricked, but I didn't know any other word for it.

I just got done with that same problem, you. Can actually still power off your device from the battery logo.
Then you will have to hold the power and volume down to get into download mode and flash the stock rom using odin for windows or heimdall for Linux/mac.
If that dosent work then let me know i have another solution to ypur problem. I just meed to know if u can get into the download mode or not
Sent from my MB865 using xda app-developers app

Hope i can help
jarrin92 said:
Hello people!
First of all; thank you very much for your time and effort in developing ROMS for all of my android devices. Keep up the good work :good:
Now, I just bought the galaxy tab 2 10.1 Wifi (p5110) a month ago. Naturally I didn't like the bloatware Samsung shipped with their default ROM.
So I started flashing some custom ROM's. All went flawless until yesterday.
I guess it's my own fault, but here's my situation:
Yesterday, in order to install the Zap Blaster rom, I installed TWRP.
Here is where i think it went wrong:
I Wiped the /system partition and then rebooted the device. Naturally it wouldn't boot up anymore. But I wasn't able to shutdown the device anymore and enter the Recovery (or so I may thought).
My next action was to drain the battery, in order to completely shutdown the device. But now it only shows a battery with a loading indicator.
I charged the device for 8 hours but it still only shows the battery with the loading indicator. This screen appears when I connect the tablet to a power source. I can then "hard"-shutdown the device, by pressing the power button for 10 secs.
Otherwise it isn't responding at all.
When I connect the device to my computer, it shows up as a omap4430 device, but it quickly disappears. Only to show the device again, and so on.
Can I save my tablet? Or do I need to send it to the Customer Service and pay for my "sins"?
Like to hear from you, and thanks in advance for your time!
Greetings!
P.S: Sorry if my English isn't that good, I did my best effort!
P.P.S: I know my tablet isn't complety bricked, but I didn't know any other word for it.
Click to expand...
Click to collapse
Whatever you do dont send it in quite yet. Try holding the power and volume down button and wait till the samsung logo comes up. keep holding them until the samsung logo a second time. If you can get into recovery mode i will be able to guide u from there. If that doesnt work i have one other idea too

Nexus S 4G hard bricked!! want to restore

i have a nexus s 4 g from sprint. it is hard bricked. i tried to root it and change recovery.then it shut off and wont power on, light up at all. I would like to know if i am able to achieve download mode, what do i need to do, what files and how to install to return this phone to stock?? please help!!!

Take out the battery for a few seconds and put it back; then while holding Volume UP (+) press the Power Button.
See what happens...
One helpful tool is found here:
http://forum.xda-developers.com/showthread.php?t=1984849

kozmo2k4 said:
Take out the battery for a few seconds and put it back; then while holding Volume UP (+) press the Power Button.
See what happens...
One helpful tool is found here:
http://forum.xda-developers.com/showthread.php?t=1984849
Click to expand...
Click to collapse
Nothing. Happens it don't light up or power on at all. It is not reconized on computer either. It's hard bricked.

Make sure the Battery is charging...

How can I make sure the battery is charging when no lights come on at all? All I do know is I had it plugged in for a while yesterday and it got really warm. But no lights whatsoever. The screen doesn't light up at all neither does the led.

??????

There are no notification lights on the D720, but when you plug it in with a charger, you should see a battery bar on the display.
Other than that, you are probably right about hard-brick.
I, luckily, never had a "brick" on the Nexus S, so someone else with experience may wanna chime in. But Google and YouTube are your friends.
Sorry...
Sent from my NookColor using Tapatalk 4

Hey man, did you have any luck with this? I'm experiencing the same problem.

Talal916 said:
Hey man, did you have any luck with this? I'm experiencing the same problem.
Click to expand...
Click to collapse
Please help me, i have the same problem

been awhile since any action here. saved mine with JIG method once but this time it won't work ??!(why) , in search of a solution again! -> hardbrick #2 on this device!

You guys can try a USB Jig. If that does not help, I think JTAG is what you need.

Jesus... just to revive this thread (and this concept of hard bricking), I think I just accidentally bricked mine as well.
Here's exactly what I did:
One moment, it was working spectacularly - fully stock, but unlocked. I had just listed it on eBay, too.
So I ran a factory reset on it (from the Settings menu), also "erase USB storage".
Then, after it shut down for the reboot, I pulled the battery.
...
That was it. Now it doesn't turn on for anything whatsoever. No device detected on USB when plugged into PC. Remove, replace battery, hold VolUp+Power, nothing. Plug into power adapter, nothing. Nothing at all.
But the back does get lukewarm after a minute or so, as if it's alive in the head but frozen, unable to start the bootloader.
WTF? I also have 2 more of these Nexus S 4G's, and both of them seem to have Flash storage chips that exhibit the same behavior when their chips are placed in (this) working motherboard. They can't boot. When I try to "hot-flash" it by booting the bootloader then swapping the Flash chips, they can't flash anything (this is probably to be expected). So, if I can get my ONCE-WORKING phone back to life, there's a good chance I can get another working as well (one just has a cracked glass, otherwise working mainboard & peripherals).
It's old, yes, but it's a damn shame to E-waste these things for a stupid software problem like this!

[Q] Motorola RAZR HD XT925 Doesn't Start (Blinking Green LED)

Hello. I have problems with my device, a Motorola Razr xt925 HD. It doesn't start, it just keeps the green led blinking when connected to wall charger, and when I plug the USB, makes a sound of a new device detected but only for a few seconds then it makes a sound of an unplugged device, and so on. It doesn't respond to any combination of buttons. I let it charging overnight, even though the battery was nearly full before this happened. Don't know if this is relevant but before this happened, I was going to flash stock Retail Brazil firmware by fastboot and got a flash failure. I turned it off and then it wouldn't turn on again. I never had this happened, I had problems but I always solved them all. Not this time hopefully you guys can help me or tell me what it could be, because I doubt it was the battery. I leave you a video showing my case.

i dont know for certain but the only time i see that green light is when battery is ou and i put it to chrge. Could your phone be in apfastboot and can t charge. It is a bit of a tough situation to troubleshoot.
Did you try keys combo to put it in fastboot, and test it by flashing
or maybe use rsd lite see if it shows you device connected? maybe then you can flash stock
i am sure there are other possibilities, let s hear from you

There's no way to enter in Fastboot by key combos and RSD lite doesn't show my device :/ maybe I need a factory cable, just in case that the battery is empty. I need more suggestions please

me paso lo mismo
did you find any solution?

im having this problem after i start using KK 4.4.2 seems like the phone go to sleeping mood by it self while my screen is locked so i have to keep clicking at power and volume up and down to restart the device now im looking for an update or a fix for this problem, another problem is the device WIFI do not catch my house signal while im away 10 feet from the house the software have bugs

I've been using CM 11 (KK 4.4.4) with no issues. This is a flash problem or maybe the battery. My phone is still dead btw I see that two more people are having the same problem here... we need a solution please.

chuYxP said:
I've been using CM 11 (KK 4.4.4) with no issues. This is a flash problem or maybe the battery. My phone is still dead btw I see that two more people are having the same problem here... we need a solution please.
Click to expand...
Click to collapse
i think your your device is dead.
this exact thing happened to me.
it happened on september, i was forced to get a new device.
i love this phone but it was dead.
i hope a fix comes through i would like to have it back

I ll take one of your hand, I need parts if interested

Any update with this? Did you try with a factory cable?

I'm going through the same thing , I read the other day that and the driver installed and nothing more .
keep trying to revive my device.

I'm going through the same thing. When I plug it into my pc , under device manager it shows "Human Interface Device" then it unmounts itself then remounts itself then unmounts. Over and over..... I've even replaced the battery.

I was running stock rom with just root, phone was working great. phone rebooted, screen never came back on but when i connect it to my computer it sees it in adb..........
Any advice would be great.
Thank you

kilroy1stcav said:
I was running stock rom with just root, phone was working great. phone rebooted, screen never came back on but when i connect it to my computer it sees it in adb..........
Any advice would be great.
Thank you
Click to expand...
Click to collapse
This thread for the droid Ultra might interest you: http://forum.xda-developers.com/droid-ultra/general/droid-ultra-maxx-brick-recovery-t2830806
There is some discussion of the Razr HD in this thread. It looks like someone with an unlocked device would need to dd their bootloader partition for this method to work.

A few years later .... Any solution? rsrsrs

any update on this scenario?
i have this situation too and the time could give us an answer, i am searching again, i took my device to some 'phone repair stores' and in less than 5 minutes they told me that the phone was dead, but i have my last doubts

Just to add an update here
I ended up with the Green light only and blank screen after trying to fix a battery issue, despite getting a number of batteries my phone wasn't accepting the batteries.
I remembered a battery issue a long while back, so went to reflash my phone to see if it resolved it.
I ended up with the green light and blank screen and no matter what buttons, it would just make a noise then keep rebooting.
I ended up using the Unbrick bat file.
RSD Lite was briefly showing a Medfield device of something starting with Med, but since the phone kept rebooting I couldn't reflash it again.
I did the Pwr and Vol down and as soon as I saw the device, I clicked the UnBrick bat and it managed to get my Moto logo up.
I then booted to Fastboot mode and reflashed and my phone is back,
See this link for the UnBrick, but when you do it, you have to be fast to catch it while the device is seen, otherwise the phone reboots after 4s or soo.
Softely Unbrick XT890 Razr i - Really Unbrick the Zombie
Well do not think that this thread is one among others. It's my experience when i messed up with my Razri. I wish I had this before, so I'm sharing it with you ! Every has his experience and a way to do it, so this is mine First I searched...
forum.xda-developers.com

blocked on black screen

Hello,
Ive tried to look for a similar situation in other thread but each case is different so i open a new one.
This morning, when i took my idol 3 the screen did not switch off when pressing power button. I thought it was battery but when i plugged charger,nothing happened except the led is on continuously. I kept power button pressed for 10 seconds. The phone vibrates shortly but still a black screen, no sound and no reaction from the touch panel. Power+vol+ did not led me to my twrp recovery. What can i do now to get it work again? The phone is rooted with Rom Eu 4.2 from murigny64 and it is the first time i encounter this issu. Thanks in advance for helping me

Tonight i disconnected the battery for about 30min then connect it again. Then i tried to start in recovery: Just a vibration but no display and no sound. I unplugged/plugged the battery again and try to start. Same problem. What the hell could happen? Maybe a deffective hardware

Insist on boot ( normal or in to recovery with vol + and power).
That is a hardware brick.
Happened to me to some times, insist, it will unbrick

persona78 said:
Insist on boot ( normal or in to recovery with vol + and power).
That is a hardware brick.
Happened to me to some times, insist, it will unbrick
Click to expand...
Click to collapse
Hopelessly i tried to restart several times before you post your message. But im gonna try again.
I charged the phone all the night but nothing better and the phone is not detected on pc so no adb action possible.
Maybe the battery is dead...

nigloud said:
Hopelessly i tried to restart several times before you post your message. But im gonna try again.
I charged the phone all the night but nothing better and the phone is not detected on pc so no adb action possible.
Maybe the battery is dead...
Click to expand...
Click to collapse
Can be, can be to... To bad if is battery.
But still trying to boot, is very difficult to.
.

thank you for advise but it's still not working. I spend about 30 minutes trying different combination of button: power pressed until it vibrate, power+vol up, power+vol down, power+vol up & down, discontinuous press of power with charger and no charger....and so on. Its a complete failure.
If it is the battery, there was no sign of weakness before (short life, random shutoff, ....) . It happen suddenly: I lock my screen before sleeping and the next morning no way to switch it on again.
I thought I would avoid problems for long with a twrp recovery, a backup and adb tools on my pc.....but for hardware issues its useless.

How can I be sure it is battery before purchasing another one ?

nigloud said:
How can I be sure it is battery before purchasing another one ?
Click to expand...
Click to collapse
There is also possibility that your screen has been broken
Sent from my 6045I using Tapatalk

belkoo said:
There is also possibility that your screen has been broken
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
If it was the screen the touch panel would work and i could sense vibration when typing the pin code no?
The led bright continuously when i plug instead of flashing slowly as it used to do when charging. That why i think its battery.

...and when i start in recovery the phone is not detected on my pc

That's hardware brick. Don't give up, try to boot, normally or in recovery, keep trying it will boot.

Have you tried to open the phone and disconnect battery? Custom ROMs made me similar issue a few times.

jani0417 said:
Have you tried to open the phone and disconnect battery? Custom ROMs made me similar issue a few times.
Click to expand...
Click to collapse
Wtf idol 3 has non removable battery haha
Sent from my 6045I using Tapatalk

belkoo said:
Wtf idol 3 has non removable battery haha
Sent from my 6045I using Tapatalk
Click to expand...
Click to collapse
Therefore the back can be dismantle and we can access battery and that s what i did.
Yes i disconnected it for several hours and pluged it again but it gave me the same result. And now it doesnt vibrate anymore when i keep the power button pressed a while.
I purchased a battery on internet and im waiting for delivery to test if im right or not. Il feedback about the test.
Anyway its nice from you to look for any solution. Thanks

nigloud said:
Therefore the back can be dismantle and we can access battery and that s what i did.
Yes i disconnected it for several hours and pluged it again but it gave me the same result. And now it doesnt vibrate anymore when i keep the power button pressed a while.
I purchased a battery on internet and im waiting for delivery to test if im right or not. Il feedback about the test.
Anyway its nice from you to look for any solution. Thanks
Click to expand...
Click to collapse
I guess you did everything properly, so just one thing: at first time when I did this, I choosed the wrong cable (which didn't 'reset' the phone), so I hope you pulled both out.

jani0417 said:
I guess you did everything properly, so just one thing: at first time when I did this, I choosed the wrong cable (which didn't 'reset' the phone), so I hope you pulled both out.
Click to expand...
Click to collapse
I think i choose the good connection: This is the one over the battery with 6 wires: 2 red, 2 white and 1 black (see picture attached). I just left it with a small screwdriver to disconnect.

nigloud said:
I think i choose the good connection: This is the one over the battery with 6 wires: 2 red, 2 white and 1 black (see picture attached). I just left it with a small screwdriver to disconnect.
Click to expand...
Click to collapse
Yep, that's it

Hello,
I received the new battery today.
So i unpacked it, i unplugged the old one and plugged the new one ...and guess what happened......the same bevahiour as with the old battery: when i press the button power, it vibrate but it doesnt start neither in recovery nor in normal mode.
I just precise that the new battery is charged at 50%........:crying:
So the problem is not the battery but it was the only thing i could test by myself before sending the phone to alcatel for repair.
Im still wondering what could happen to my idol 3: It had been woking perfectly for months and one morning with no warning, it refuse to switch on. Ok sorry for annoying us and hope it wont happen with yours.
I hope alacatel will apply the guarantee although the phone is rooted and bootloader unlocked....because its a hardware issue i think.

Hello,
Just to conclude. The phone got back from repair after 10 days. They have changed motherboard, battery and also the back that was damaged. Its a brand new phone .