Htc Elf Help - General Questions and Answers

I have a htc touch(elf),i went to upgrade the os but something went wrong so it doesnt work, i have no os on it now it turns on and all i get is the htc smart phone logo,,,i did a hard reset,when i turn it on and press the camera button i get the tricolor screen and some numbers can some one please help me
Thanks

Related

I need help with htc tytn ii

Hello you good people,
I am experiencing a problem on my HTC TYTN II and I would appreciate it if you guys helped me.
I downloaded an application called "Speed Booster" and i installed it on my phone. After
installation the software requested that I soft reset my device which i did,from that point
my phone does not boot up when I press the power button. However,when I plug in a usb to my
phone and connect it to my laptop it boots up,it goes as far as "Smart Mobility" then it
restarts again,goes up to "Smart Mobilty" then restarts again,it keeps on reapeting this.
I should also state when I hold the Camera Button and insert the usb cable,the phone succesfully
goes into Bootloader or Tri-color screen,in the top left corner it says: "KAIS130",
"SPL-1.56.0000" and "CPLD-8".At the botttom it says "USB".And finally I do not know my Radio version
as my phone cant get to that screen that displays the Radio Version.
Please guys how can I get my phone to work again? Am sure its not a big problem as I have never
attempted ROM Upgrading or anything else in that line.
Thanks,
Kelly

HTC Hero Stuck in Safe Mode

Hi,
I hope you can help.
I recently changed the ROM on my HTC to the VillainROM12.0 . This worked fine. However, since the rom change, the phone itself has since been stuck in safe mode. I have tried everything to get out of it, by holding down the menu and power keys on boot up, taking out the battery and leaving it out. I then changed the ROM to HeroDroid 07, this rom loaded fine, but the phone is still stuck in safe mode. I managed to get the phone out of safe mode once, but on re-boot it's gone back in again. The phone is a UK Orange issue Hero and was working fine before the ROM change, as far as I can tell all the buttons are working. I have also re-flashed the phone with the ROM several times, but it's still the same.
I called Orange, and they said, "they detected a fault" and gave me a code to report to HTC, the code is FW229 - how they can detect a fault, I don't know. I have the option to send it back to HTC for repair or Pay £15.00 to have another Hero delivered.
Do you think this is a genuine fault with the phone, or is it something to do with the Rom change and how to get out of safe mode? Any help would be greatly appreciated.
Thanks in advance.
Hi, I Have the Same problem with my Hero.
- All roms i found here are starting in safe mode only.
- All roms with android 1.5 are starting normal without safe mode
Maybe a rom developer can help us to turn off the "safe mode" feature.
I rolled back to the 1.5 HTC Orange Rom from the HTC site and yes, safe mode is off. As soon as I tried to update to 2.1 again, back in to safe mode. I did not unlock the phone before the update, so am wordering if this is why? However, it's the same with the Sim out, so I have no idea why it does this. I am wordering if this problem is only with orange issue phones?
Any ideas would be great.
How have you managed to get the phone out of safe mode?
I managed to get the phone out once, by holding down all the buttons on boot, but when I re-booted the phone after, it went back to safe mode and I have not managed to get it out of safe mode since. I downgraded to 1.5 and it did not show safe mode, but soon as any 2.1 rom is installed, it goes back to being in safe mode. Holding down the menu and power keys should either take it out or put it in safe mode on boot, but does nothing when 2.1 is installed, all I get is safe mode.
Any ideas anyone?
Can an admin please move this thread in the HTC Hero: G2 Touch section?
I think there we would get more help
Heron HTC stuck in safe mode
I spent two days trying to get "Safe Mode" off my Hero HTC after upgrading the ROM to version 2.1. I called my provider and even HTC but no help from either. I found an obscure posting that said to power on the phone while holding down the track ball and that did it. There are also other power on options: hold volume button up or down, hold menu down, hold menu + back...but for me, none of these helped...only the track ball.
SafeMode for PocketPC v1.02
http://www.freewareppc.com/utilities/safemodeforpocketpc.shtml
This one is free, though SafeMode3 is not.
Owww tha powa !

[Q] HTC Touch HD, Power Button defect/error

Hi,
im using a HTC Touch HD T8282 wit WinMo 6.1
The Power Button has a huge failure.
If i put in the battery the mobile phone automatically starts up.
Then When its starting up there is a message if i really want to shutdown my mobile phone.
And from startup along the power button doesnt work.
I can Press the button and it feels really normal, like ever, but there is no response.
What could this be? The HTC Support Chat couldnt give me any information because the Mobile Phone is branded ( no guarantee anymore ).
Made a hard reset so the mobile phone is in factory settings, but it doesnt work.
BTW: There was no water contact, it was working a week before and i didnt used it for a week and now this is appearing.
Im really hoping for help.
Thank you very much.

[Q] htc raphael switch on and stuck with tricolour

Hi,I got a HTC Touch Pro T7272(Raphael 100)and last week while i was pressing down the volume down, the device shut down automatically and since then...when i on it the screen will boot up with tricolour.I tried to re-flash the ROM but it still boot up in the same way.The device do work(start up windows mobile) when I press down the on button+center button+soft reset.But after that the screen will keep blinking up the volume column and when i tried to increase the volume, it automatically decrease it again(still blinking).And I am wondering that any expert here can teach me how to save my T7272??Is there anyway to make it back to normal start up??
PSlease......help if any expert read this and know how to fix it...
Thanks in advance...
SPL-1.90.OliNex
TAEL ROM

White screen problem in CDMA HTC Pro 2 does not install.

I wanted to help I am using a task29 with htc rom 2 Pro CDMA version 3.28.4.3 and I do not give this to install.
How do I solve this problem of white screen, and says one word and does not install HTC will be that there must be some software to install it.
One more note sync windows mobile can not read the usb device is not to give way to install.
I await your response thank you.
Is the white screen when Windows tries to load? Take the battery out, put it back in and hold the volume down button while pressing the power button. That should put you in bootloader mode and there you'll be able to task29

Categories

Resources