Related
Hello forum members,
would you please help me have the BT HTC S710 Original ROM? I have only seen the BT HTC S620, which when I tried to flash with to rebrand, blanked my HTC S710 screen. When I turn it on, only the two green lights come on either side of the phone ear piece.
It means that a hard reset is not visible on my screen, there is no tri-colour display either.
I have tried other ROMS, and get invalid id errors and error 270. I have tried Dr Gonzo and related ROMS.
It's now three days, no phone no pim, I am lost.
Thanks for your attention.
YOSEFE.
PS. You may PM me if convenient.
Hi YOSEFE,
I have the same problem
I tried the 620 rom and just have the 2 green LED's. I cannot get a bootloader screen and attempts to flash new roms get to 3% and then I get errors.
Did you ever sort this problem out?
Paul.
Have you unlocked ur USPL in ur phone?
You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...
frauhottelmann said:
You tried to flash a S620 ROM to a S710???? Look in the Wiki, there is a link to the official ROMs on the ftp...
Click to expand...
Click to collapse
Yes, I'm afraid I did, by mistake, flash 620 ROM to the 710 [feels rather stupid!]
Not happy with BT’s [mobile operator] own ROM and software that went on the phone, I successfully flashed Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 and have been using it for a couple of months but when BT launched their new phone software, I decided to try it but because it won’t work with WM 6.1, I needed to then revert back to BT’s old ROM and this was the only one available that I could find [feels rather stupid again].
The screen is completely black; only green LED's on each side of the earpiece shows any sign of life.
Connecting the phone via ActiveSync shows “HTC-S620 Connected” and I am able to browse the files on the phone but not having a display on the phone, I am limited to what I can do.
I have tried running RUU_Vox_HTC_WWE_1.34.405.1_4.1.13.54_03.10.90_Ship.exe but ActiveSync connection is lost and I hear the Windows hardware removed sound shortly after the progress bar is shown.
I’m at a loss as to what to try
Paul.
Shut it down, then hold down camera button and plug in the usb cable. The boot screen should appear and you should be able to flash the normal ROM!
I cannot get the boot screen, or any screen for that matter.
I have tried taking the battery out to make sure the phone is off. Reinserting that battery then holding the camera button down and then inserting the usb lead. The keypad lights up for a few seconds then goes out. ActiveSync then connects but the screen is still black
Paul.
[Edited: Sorry duplicate post]
Sorry for replying to my own post but a quick update...
I have managed to bring the phone back to life and reinstall Dr. Martin Gonzo’s Windows Mobile 6.1 v1.1 on it again.
This is partly assumption and not particularly accurate but the original poster (YOSEFE) might find this useful.
By installing the S620 rom on the S710, not only did I make the screen go blank, I think all the keys ended up remapped and mixed up, therefore any attempt to install Gonzo’s rom ultimately ended in failure because when the phone beeped and wanted a keypress to continue, pressing the left softkey for ‘OK’ or ‘Yes’ did not work because it had been remapped to do something else.
What worked for me is that when the phone beeped during the uspl_116_jockyw.bat install, I pressed the X or C key (I can’t remember the exact one now). One of these keys must have been the ‘OK’ or ‘Yes’ key after the S620 rom muddled things up. I only know this by trial and error over the period of today.
To my glee, the backlight lit up on the display and after a bit of tinkering, I’m back in action again
I won’t be installing a rom designed for another model again!
Paul.
Bat 'n' Ball,
sorry for not returning here to see your post. I will remember the possibility of pressing "X" or "C", should I make the same mistake as before, although like you, I should never do that ever again. However, technology being what it is, who knows?
In the end BT got me sorted out.
Thanks for sharing.
Hi,
I got my HTC HD2 only a couple of weeks ago, and I already got a problem with it
The thing is, that I can't boot it up properly; when pressing the "Turn on/Turn off/hang up"-buttom, it boots by comin' up with the white screen with the green "HTC"-logo in the middle and some system information in the left buttom.
Afterwards the animation with "quietly brilliant" comes up and the Windows logo with the orange background comes up - and then it turns off and boots up again.
I've tried to...
* reset it (not hard reset - I have some contacts that I don't wanna loose).
* charge it up (I can, when the windows-logo appears, see, that the battery's full)
* pull out the battery for several hours
Please help - I'm very sad about that I used tons of money on a device, that now won't work.
Is there any way, where I can solve the problem without loosing all my contacts?
I did it!
Ok, found out that all my contacts were synch'ed with my gmail.
I hard-resetted it, and it works now.
Thanks for your help
Lol well done!
For people that dont have push/exchange contacts etc, always backup using myphone, spb, sprite or other software.
Cant tell you enough how important it is to back up, unless you like loosing everything right?
Greetz.
Boot problem..
Hello there,
I bought my HTC HD2 like 2 months ago, and the first two days it froze like thrice !
Now, suddenly i find it turned off then when i try to boot it up, it get stuck on the white screen with the green "htc" and information in red to the bottom left. It hangs there!
It did later show the following black screen with white text:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source. Press Volume Up to reset your decice or press any other button to cancel. This operation will delete all your personal data and restore the device to it's factory settings"
but the thing is, i can't press anything at this stage, nothing happens....
I did try to hardware reset, charge, remove battery and put back, etc..
areej said:
Hello there,
I bought my HTC HD2 like 2 months ago, and the first two days it froze like thrice !
Now, suddenly i find it turned off then when i try to boot it up, it get stuck on the white screen with the green "htc" and information in red to the bottom left. It hangs there!
It did later show the following black screen with white text:
"The device is unable to boot because either you have turned off the device incorrectly or tired to install an application from untrusted source. Press Volume Up to reset your decice or press any other button to cancel. This operation will delete all your personal data and restore the device to it's factory settings"
but the thing is, i can't press anything at this stage, nothing happens....
I did try to hardware reset, charge, remove battery and put back, etc..
Click to expand...
Click to collapse
You tried:
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If that dont work try flashing a new rom using mtty.
If that still doesnt work I would expect it to be a hardware problem, i would send it back to htc or if without warranty take it to a Phoneshop (or open yourself), probably a wires loose or something.
Thank you for replying... but sadly no, it didn't work
I do have warranty, ill take care of that..
Thank you again.
did hard reset and returned to factory settings. all my installed applications were lost. pity.
All I wanted is to install the @#$%% russian keyboard!
ALWAYS backup first. Simple.
I am having the same issue. Nothing has been installed as far as App's go. This is straight out of the box.
Boot Screen
R 2.10.50.26
G 15.39.50.07U
D 2.13.90963 8G
I have been able to Boot it to the home screen once. But the battery is Low and When I connect it, it locks
Things done -
Hard Reset up+down+end
up
up
Battery pull
Removed SD and SIM and turned on
None have effect
Idea's ?
I have the same issue. Phone Just out of the box I can't start it. It started once but crashed, I removed battery and is gone.
Now it remains frozen with white screen and htc logo.
I tried everything reset, hard reset, all things now is charging the battery for 4 hr. Crappy phone or software.
What to do??
ktod_16 said:
I have the same issue. Phone Just out of the box I can't start it. It started once but crashed, I removed battery and is gone.
Now it remains frozen with white screen and htc logo.
I tried everything reset, hard reset, all things now is charging the battery for 4 hr. Crappy phone or software.
What to do??
Click to expand...
Click to collapse
If its brand new out of the box, id take it back and get a different one. If its second hand, see if you can get into bootloader. If you can you can then flash a stock htc rom, if not its back to the shop.
Dark Ninja said:
You tried:
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
If that dont work try flashing a new rom using mtty.
If that still doesnt work I would expect it to be a hardware problem, i would send it back to htc or if without warranty take it to a Phoneshop (or open yourself), probably a wires loose or something.
Click to expand...
Click to collapse
hey can wires be the reason that hd2 cant boot up.shows green boot logo but no system information at boot and stucks there only tried every thing hard reset,custom rom,stock rom,mitty,sd method rom install..every thing...
i have the same problem But how i can Backup when phone is turned off
Guys,
I am really in a fix. It seems my HTC Diamond 2 is stuck at the first screen (all black with HTC written in grey). I cant access my phone book and the operations are extremely slow. I have tried doing the soft restart by pressing button next to the stylus. Please help. Also as yo may have guessed I am extremely basic in my knowledge of technical stuff so please try to keep it as basic as possible. Any Kind of Help will be appreciated.
I guess you could start off with taking out your battery... But I guess you already did that?
Same Issue
Hi, I'm having the same problem described above, but worse. I have an HTC Diamond 2. It stays at the logo screen (black screen with HTC letters in white). It doesn't pass anywhere from there. I've tried using the reset button on the back near stylus, tried the hard reset (Vol Up/Down + Power key) but it doesn't respond. There's an option that "works": If I press the 'call' key + power button, it shows an update menu with the following: 1. Update Logo 2. Update OS 3. Update Eboot 4. Format User Space 5. Return; none work except for the format user space option, but it does nothing.
I've tried also from the PC but it doesn't recognize the device via USB. I downloaded Active Sync, and an update wizard from HTC.com but still no success in recognizing the device.
Please help me, I need this phone to keep working, I don't know what triggered the problem..
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
Might Help
ikheetkoen said:
Hello there,
I have recently received an HTC HD2 from a friend of a friend of mine. It didn't work and was stuck at a black screen.
After receiving the HD2 I saw that the HD2 was in a boot loop of some sort. Every time I would turn it on it would vibrate once, and then turn off. Then it would vibrate once again and it turned off again. The backlighting of the screen would turn on, and then after a certain period of time (maybe like 5 seconds) they turn off again.
Somehow (by luck, maybe) I managed to boot the phone into windows mobile 6.5. I still got a black screen, but I could hear the sound that the phone makes after it boots windows. I then attached the phone to the computer and downloaded the latest HTC HD2 Windows 6.5 ROM and flashed it to the phone as standard procedure. Now, every time I turn the phone on I hear the sounds of windows booting up and I can connect with it using windows mobile device center. I also hear sounds when I push the buttons on the phone.
TL;DR-> Black screen, phone reacts to input.
Question: will replacing the screen fix the phone? Or is it some other component failing. Booting windows proves the phone isn't bricked, right?
Thanks in advance.
Click to expand...
Click to collapse
Hi, you can always try to boot into three colored screen, by turning the phone on while holding the DownVol key at the same time. If this doesn't work you would need to buy a new screen to see if that fixes the problem.
Heres a link to amazon where you can buy a new LCD, you can also search how to change the screen on Youtube
http://www.amazon.com/HTC-HD2-DIGITIZER-COMPLETE-ASSEMBLY/sim/B003QSDSM0/2
Hey guys. I'm pretty desperate so i decided to make this thread.
Here is my problem:
I have changed screen on my phone today. Everything went without any problems since I tried to turn on the phone.
When I tried to turn it on I can see only MI logo on display ... Then after couple of seconds phone will restart automatically and goes into Recovery mode.
I tried to boot it from there without any results. Also tried to reset and wipe data without any results.
The biggest problem is that I cant even get into Fastboot menu by pressing Power button + volume down button. So I cant connect my phone with PC and try to flash new ROM.
Any suggestions? I would be really thankful for any advice.
Thank you very much.
roweruur said:
Hey guys. I'm pretty desperate so i decided to make this thread.
Here is my problem:
I have changed screen on my phone today. Everything went without any problems since I tried to turn on the phone.
When I tried to turn it on I can see only MI logo on display ... Then after couple of seconds phone will restart automatically and goes into Recovery mode.
I tried to boot it from there without any results. Also tried to reset and wipe data without any results.
The biggest problem is that I cant even get into Fastboot menu by pressing Power button + volume down button. So I cant connect my phone with PC and try to flash new ROM.
Any suggestions? I would be really thankful for any advice.
Thank you very much.
Click to expand...
Click to collapse
Did you follow a tutorial for replacing the screen on your device? Where did you get the screen from? Was your screen replacement just the Touch Panel or the full screen replacement with LCD + Touch Panel? Was it an actual Xiaomi part or an aftermarket part? I would take your device apart again and make sure you didn't leave something loose or disconnected.
Quick question. Was you old display still working where you could see what was going on? Like, was it just cracked or was it completely inoperable?
Sent from my Nexus 6 using XDA-Developers mobile app
Thanks for reply. Yes I followed complete tutorial on youtube. Screen is from ebay. It should be original. I replaced full screen ( lcd + touch panel ).
So found simillar problem as mine - due to improper installation of back cover volume up button was pressed which caused that phone went to recovery menu after start ... ( you have to hold volume up + power key to get to Recovery menu). So I tried to dismantle it again but it didnt help. Still have same problem.
Yes old display is alright. I can see everything just touch screen is broken so I cant do anything on it. But I cant imagine this would be problem of display ....
Give your craftsmanship and handiwork the benefit of the doubt and install your old LCD+Touch Panel and see what happens. If you have everything installed correctly with every cable connected to it proper location then you should be able to boot normally.
Sent from my Nexus 6 using XDA-Developers mobile app