Howdy all,
Long time lurker, first time poster, unable to post direct to the development forum so I thought I had best start here.
So to cut a long story short, I suffer from delayed texts and missed calls, after no end of problems trying to get T Mobile and HTC to sort it out, I decided to S/off the phone and try some different roms, each one however incurs the same problem.
So I have tried the SAGA roms, Endymion 3.4 rom, Reaper rom, and even the latest pre rooted stock rom 2.10.401.9, all experience the same problems. I have yet to try the original 1.28 original rom, as It would mean having to S/on, but I have read other reports that suggest this too doesn't work.
So come on T-mobile UK users, what rom/software base do you use without delayed texts/missed calls.
Of course I could just set the preferred network mode to GSM only, this solves the problem, but obviously gives a slower network connection.
Any help, thanks ?
T-mobile UK user, don't experience the issues as described by you, did slightly back in the earlier days of the 1.47 base (thankfully that has long gone)
You can see my full details in my signature....I'm guessing that we're using different Radios?! so possibly worth upgrading and testing my version out, if you're on the same then I don't know what to say....
Where abouts in the UK are you? I'm in East/SE England, do you have decent mobile strength where you live? by your GSM comment I suspect that your 3G signal is weak and therefore your often in and out of signal which may be the cause of the issues?
Hi Ben,
Live in Leeds and have no problem with signal strength, have tried the Endymion rom but I was definately suffering fron long text delays.
I am no longer on it and I didn't make a note of the Kernel/Radio, are you using the ones included with the rom or have you changed anything?
Bry5
bry5 said:
Hi Ben,
Live in Leeds and have no problem with signal strength, have tried the Endymion rom but I was definately suffering fron long text delays.
I am no longer on it and I didn't make a note of the Kernel/Radio, are you using the ones included with the rom or have you changed anything?
Bry5
Click to expand...
Click to collapse
The Endymion ROM wouldn't have changed your Radio. Kernel would have Endymion its default on that ROM.
I upgraded to this Radio intentionally, not related to ROMs
So which radio do you have currently installed? Settings->About Phone->Software->Base etc....and note baseband version
Interesting.
Checked and I am on 20.28I.30.085AU_3805.06.02.03, which the development forum suggests is taken from the 1.47.401.4 RUU, which of course was the main problem.
Could this be what is going wrong??? Does the radio not change with each rom update?
If I want to change radio do I juest follow the guidance at http://forum.xda-developers.com/showthread.php?t=1178001(20.4801.30.0822U_3822.10.08.04 and will and radio work with any rom, if it does I will definately go back to Endymion.
Thanks for any help you can offer.
bry5 said:
Interesting.
Checked and I am on 20.28I.30.085AU_3805.06.02.03, which the development forum suggests is taken from the 1.47.401.4 RUU, which of course was the main problem.
Could this be what is going wrong??? Does the radio not change with each rom update?
If I want to change radio do I juest follow the guidance at http://forum.xda-developers.com/showthread.php?t=1178001(20.4801.30.0822U_3822.10.08.04 and will and radio work with any rom, if it does I will definately go back to Endymion.
Thanks for any help you can offer.
Click to expand...
Click to collapse
when you flash custom ROMs they rarely in fact hardly ever contain Radios although stock ROMs (RUUs) often contain radios.
I believe that the radio version in my signature has a link to the new radio along with valid installation instructions.
I suggest that you change.
But ensure that you check the download before installing as suggested in the instructions with the md5 sum and don't hurry the process.
You can't backup radio version only reapply previous versions.
Nice one.
Radio updated, fingers crossed no more delayed texts.
Thanks again.
must say i've never had this issue, i take it you have signal right? or is it delayed because there is low quality signal? also are you using 3rd party apps for messaging and calls like go dialer etc? i have DS rooted currently on reaper 2.2.2 no problems and best signal quality i've ever had, as the problem persists through rooted or unrooted roms it sounds like a problem with your hardware/set up in other words t-mobile are at fault, i'd unroot and then go talk to them or phone them but we all know how bad they are at answering calls and helping
Can I ask? What's the best radio to use and why flash radios? I'm on 20.28i.30.085au_3805.06.02.03_m
Sent from my Desire S using XDA
ttocs99 said:
Can I ask? What's the best radio to use and why flash radios? I'm on 20.28i.30.085au_3805.06.02.03_m
Click to expand...
Click to collapse
It is dependant on where you live, which network and which ROM you're on.
But you can see from my signature what I use and I live in the UK on T-mobile and again my Radio is displayed in my signature.
You can only flash Radios if your S-OFF though
ben_pyett said:
It is dependant on where you live, which network and which ROM you're on.
But you can see from my signature what I use and I live in the UK on T-mobile and again my Radio is displayed in my signature.
You can only flash Radios if your S-OFF though
Click to expand...
Click to collapse
I was on T-Mobile UK until I sim unlocked it by code but I've been on Endymion for a wile then I switched to miui the latest version today and I'm s-off I just wondered what are the benefit of having difrent radios or and I'm on giffgaff UK
Sent from my Desire S using XDA
ttocs99 said:
I was on T-Mobile UK until I sim unlocked it by code but I've been on Endymion for a wile then I switched to miui the latest version today and I'm s-off I just wondered what are the benefit of having difrent radios or and I'm on giffgaff UK
Click to expand...
Click to collapse
The radio governs your Wifi, BT, Mobile Data and Voice Calls
A rule of thumb is to only change you radio if you are experiencing problems? like dropped calls, delayed texts etc as described by the user above.
I've been on this radio for months without issue and would recommend it.
You could always note your current radio version and then switch, you'll find all the radios in this thread http://forum.xda-developers.com/showthread.php?t=1178001 along with instrcutions on how to change version.
ben_pyett said:
The radio governs your Wifi, BT, Mobile Data and Voice Calls
A rule of thumb is to only change you radio if you are experiencing problems? like dropped calls, delayed texts etc as described by the user above.
I've been on this radio for months without issue and would recommend it.
You could always note your current radio version and then switch, you'll find all the radios in this thread http://forum.xda-developers.com/showthread.php?t=1178001 along with instrcutions on how to change version.
Click to expand...
Click to collapse
Thank you
P.s do i have to use adb i havnt a clue how to use that but cant i just boot into bootloader and let it install thru there??
Sent from my Desire S using XDA
ttocs99 said:
Thank you
P.s do i have to use adb i havnt a clue how to use that but cant i just boot into bootloader and let it install thru there??
Click to expand...
Click to collapse
The OP of that thread is old school and simply uses adb to copy the radio file from his PC to his devices SD card, you could easily mount the SD card and then copy it using windows file manager.
just ensure that you verify the md5 sum of the radio on your device before you flash it.
which as you say can be done through bootloader (do ensure that settings->power->fastboot is off) and once the radio has been applied you move the file from the root of your sd.
I know someone on T Mobile with the exact problem. She's had it for ages and even after sending it off for "repair" to T Mobile, it came back with the exact same problem. The build number came back exactly the same. The 1.47 version.
T Mobile are a joke.
prawnguevara said:
I know someone on T Mobile with the exact problem. She's had it for ages and even after sending it off for "repair" to T Mobile, it came back with the exact same problem. The build number came back exactly the same. The 1.47 version.
T Mobile are a joke.
Click to expand...
Click to collapse
thats the problem the 1.47 build, simply move off of it!
if you're on 1.47 you can use revolutionary to become S-OFF then the whole development forum is your oyster
Quick update.
No text delays, no missed calls, thanks all for the help, the radio was clearly the problem
bry5 said:
Quick update.
No text delays, no missed calls, thanks all for the help, the radio was clearly the problem
Click to expand...
Click to collapse
glad to hear it.
You can show your gratitude by using the THANKS button, for any post that helped
Swyped form ym Dersie S unsig XAD Permuim
As yet with over a years use on Tmobile I haven't had any problems with texts or calls and Iam also on :- 20 28i 30 085au 3805 06 02 03 m
jb.traveller said:
As yet with over a years use on Tmobile I haven't had any problems with texts or calls and Iam also on :- 20 28i 30 085au 3805 06 02 03 m
Click to expand...
Click to collapse
base.1.47?
all I can say is lucky, you, as I did when I was on that version and it's well reported in this forum, or it was at least at the time
Swyped form ym Dersie S unsig XAD Permuim
Related
Here are cwm zips for the radios we have available at this time(that work). These will work for both the AT&T Skyrocket and the Rogers Skyrocket, take your pick I will be updating this thread as new radios become available. Please do not ask for the Japanese SC03DDCMKK3 radio, it does not work properly with our device.
Included in these zips:
mdm.bin
amss.bin
RIL
How To Flash:
Install with clockworkmod like you would any other zip.
I have tested these myself, as well as others on IRC and they have worked fine. I am not responsible if something goes wrong for you.
1. Original Shipped AT&T Skyrocket Radio I727ATTKJ2 and RIL
This is the radio that shipped with the AT&T Skyrocket, it is RAT interface locked which means you can't change bands by dialing *#2263#*
Click to expand...
Click to collapse
2. Original Shipped Rogers I727RUXKJ7 Radio and RIL
This is the radio that shipped with the Canadian Rogers version of Skyrocket, it is not RAT locked and bands can be changed easily by dialing *#2263#*
Click to expand...
Click to collapse
3. AT&T 2.3.6 OTA Update Radio I727ATTKK1 and RIL
This radio is also RAT locked
Click to expand...
Click to collapse
If anyone has flashed the AT&T 2.3.6 update, please pm me and I will walk you through extracting the radio so others can flash it
have tried it and it works!!!!!!!!!!!
awesome! would love to flash kk1 radio and get 2.3.6 and up.
Sent from my SGH-I727 using xda premium
twopumpchump said:
If anyone has flashed the AT&T 2.3.6 update, please pm me and I will walk you through extracting the radio so others can flash it
Click to expand...
Click to collapse
So you mean that once we flash to the 2.3.6, we can't just go back to .5?
latinohot said:
So you mean that once we flash to the 2.3.6, we can't just go back to .5?
Click to expand...
Click to collapse
why would you think i meant that lol...I need someone who has already flashed the 2.3.6 update to extract the radio from their device and send it to me so i can make cwm zips for everyone else to try Using this method to flash radios there is no verification check for upgrade/downgrade, so you can flash them back and forth all you want.
Thanks for doing this!!! I ended up going out after work so didn't get to it like I planned. If you don't mind I'll just link to this thread but you'll probably be stick-ied too. TA.
InSaiyanone said:
Thanks for doing this!!! I ended up going out after work so didn't get to it like I planned. If you don't mind I'll just link to this thread but you'll probably be stick-ied too. TA.
Click to expand...
Click to collapse
Your welcome, and if it needs to be stickied say the word...I can do that myself hehe.
I flashed nandroid to 2.3.6 so I have it available if needed.
Edit: Well after further investigation I read that nandroid back-up does not contain radio...so, oops
Sent from my SAMSUNG-SGH-I727 using XDA App
Thanks. Finally able to update my radio. Much appreciated for the effort.
For AT&T, which radio has the best reception in you're opinion...
Sent via rooted SkyRocket
After much testing, the current selection of radios seem to offer no difference in performance, the major difference is that the Rogers radio is RAT unrestricted vs. RAT restricted AT&T radio, which allows you to type "*#2263#" in the dialer and set the phone to 2g only, 3g only, 4g only, etc.
Da_G said:
After much testing, the current selection of radios seem to offer no difference in performance, the major difference is that the Rogers radio is RAT unrestricted vs. RAT restricted AT&T radio, which allows you to type "*#2263#" in the dialer and set the phone to 2g only, 3g only, 4g only, etc.
Click to expand...
Click to collapse
Ok... so I totally managed to **** something.
Picked a band, and I can't get signal anymore. Reflashed TPC v3, nothing. New modem, nothing...
Crap.
---------- Post added at 03:05 PM ---------- Previous post was at 02:59 PM ----------
Longcat14 said:
Ok... so I totally managed to **** something.
Picked a band, and I can't get signal anymore. Reflashed TPC v3, nothing. New modem, nothing...
Crap.
Click to expand...
Click to collapse
FIXED IT! Apparently taking out my SIM card and putting it back in fixed it.
I'm running KK1 and can dd a partition if that's what you need. PM me or message me on irondust(lart).
Hey, noob question but whats the point of flashing this radio lol? Does this actually allow you to use the radio that the skyrocket was supposed to come with but doesnt have an app for?
These are the firmware that control the Cellular Radio, DSP (Digital Signal Processor) and various bootloaders, not the FM radio that may or may not be part of our bluetooth chipset
BTW, AT&T 2.3.6 KK1 radio coming up shortly courtesy of lart, I'm just packaging it up now
Thanks for the fast apply, I appreciate it =) I wish we could get the radio to work on the phone if it really is built in
Did anyone take close up photos of our motherboard yet?
There are various FM radio drivers contained in the kernel, but all of them are disabled @ stock config. No idea if the chip is actually present or not, or if it is, if it's physically wired to the headphone jack (FM radio uses headphone cord as antenna generally speaking)
Close up pics of the motherboard would tell us if it's there or not
I just tried out the rogers radio (I am on ATT) and I was getting extremely low data speeds on EDGE, UMTS, and HSPA+ (10kBps) (tried both phone and PTA apns). Making calls worked fine though.
Flashed the radio and am playing around with the bands using 2263, looks like I can force EDGE by selecting GSM (I assume we should select the 850/1900 for AT&T) and can force hspa by selecting the WCDMA)
How would I force it into 3G only mode, (UMTS?)
Title says all, i noticed bad signal with latest 3.32 firmware and i remeber was very good in GB ( i got the right RIL )
Is possible to flash a Gb radio in ICS rom? thanks
Try it - should work but depends on the lib files I guess
erto90 said:
Title says all, i noticed bad signal with latest 3.32 firmware and i remeber was very good in GB ( i got the right RIL )
Is possible to flash a Gb radio in ICS rom? thanks
Click to expand...
Click to collapse
Hey, Let me know if it works, I too am having terrible signal issues too and i assume from your picture youre with vodafone ? Me too, So if it does work please tell me about it.
azzledazzle said:
Hey, Let me know if it works, I too am having terrible signal issues too and i assume from your picture youre with vodafone ? Me too, So if it does work please tell me about it.
Click to expand...
Click to collapse
He's on Vodafone Italia and you're on Vodafone UK. You mileage will vary
haha didnt notice that bit what about a UK vodafone radio from Gingerbread ? i cannot seem to find one for ICS anywhere...
Can't try today and maybe a no for tomorrow, when i try i report
erto90 said:
Can't try today and maybe a no for tomorrow, when i try i report
Click to expand...
Click to collapse
I thought I'd try. On 3.24 base (HB 1.27.1100) and I flashed 10.58.9035.00U_10.15.9035.02_2 via the PG58IMG.zip as I couldn't be arsed to get a cable and fire up adb...
I managed to call myself and got my voicemail ;-)) So it looks like the answer is yes.
WIFI seems to work.
Mobile Data worked, only got EDGE but that might just be where I am.
I'll leave it on this version and see how the battery works out. Then probably swap back to the 3.24 base radio tomorrow.
NOTE: I didn't bother changing RIL and it worked straight off. Hmm wonder if that's related to the EDGE connection.
EDIT1: Applied the 10.58 RIL and nada, then noticed a post about some files that get flashed that might cause an issue. So I applied the 11.69 RIL and it was on H then dropped to E, switched mobile off and on and nada. Hmm rebooted and it locked in to H. I think it's my current location that's the issue with Mobile Data. Just tried Speed Test on WIFI it reported 12.5 Mbps download.
So in Summary it seems to work but can't confirm definitively.
I recently purchased a Nexus S (M200) and I am experiencing very low Wifi and GSM signals. In fact, it's so low that I can't even make calls from GSM when indoors and need to get outdoor to get fair signals. Similar issue is with Wifi and I have to be within 10 meters to get a stable Wifi connection.
I have tried various roms and kernels but the problem remains. Even went back to stock gingerbread rom and the same problem. Any suggestion to get this fixed? Seems like a hardware issue and my phone is not under warranty!
Help appreciated.
I experienced the same thing on Cyanogen 10.1 nightly but when I was on stock 4.1 it was ok.
Maybe it's your provider which don't have a good network where you are.
I am sorry for my english I hope you will undrstand me.
Sent from my XOOM 2 ME using xda app-developers app
Otalgia said:
I experienced the same thing on Cyanogen 10.1 nightly but when I was on stock 4.1 it was ok.
Maybe it's your provider which don't have a good network where you are.
I am sorry for my english I hope you will undrstand me.
Sent from my XOOM 2 ME using xda app-developers app
Click to expand...
Click to collapse
I am using the same SIM on a different phone and get perfect signals. I guess it's must be a hardware issue...
Try to flash Radio..
_hito_ said:
Try to flash Radio..
Click to expand...
Click to collapse
I can try that. Any suggestion for a reliable radio to use?
You should get the most recent baseband (radio) firmware update for your model of Nexus S. If you search the forums, you should be able to find a thread all the basebands linked. Be sure to only install the one for the model you have, because the wrong one will not work.
impossibilium said:
You should get the most recent baseband (radio) firmware update for your model of Nexus S. If you search the forums, you should be able to find a thread all the basebands linked. Be sure to only install the one for the model you have, because the wrong one will not work.
Click to expand...
Click to collapse
Flashed the latest and tested a few others but the same problem
Hi, kamran666,
If you purchased it used I would check if WiFi and GSM antennas are there and properly connected.
Take a look on this video from 2:33.
Hope in might help.
The call quality on my sensation is dread full what can I do to improve it. I am running cm10 and 3.32 few.
Will upgrading to 3.33 help?
I am s on so I cant just flash a radio.
I have a matching ril from get ril
I will even tried cleaning the mic
Anybody got any other ideas
Thanks
Sent from my Nexus 7 using xda app-developers app
Unfortunately a different radio is probably your best bet... but I wouldn't hesitate to try a new SIM card if yours is more than a year old...
Sent from my SAMSUNG-SGH-T999 using xda-developers app
does installing new firmware not install a new radio though?
ldefeo1 said:
does installing new firmware not install a new radio though?
Click to expand...
Click to collapse
Ah, yeah, you're right, they do... I didn't think of that. I would try updating to the latest FW (3.33 - as you proposed). That'll update your radio which could effect your call quality/signal strength. There are also several build.prop edits you can try as well. I followed this thread a while back and had good results. Of course, if you're just in an area with awful cell coverage there's not too much you can do about it.... that said, if it were me, I'd update the radio and go from there...
So I did a full clean wipe, twice just to be sure.
Flashed RC1 and everything seemed to be going great at first. Then I noticed that the signal is dropping in and out. (I live in San Diego) It won't hold a signal for any reasonable amount of time. So it drops from 4G LTE going off. I've rebooted. At a bit of a loss. I'm operating on ATT.
Should I try to reflash? I was previously running CM 10.0 with no serious issues.
I've made sure the priority is LTE/GSM
Any help would be greatly appreciated!
May be your APN? What radio are you using?
Sent from my Nexus 7 using XDA
Same happened to me. Reflashed the modem problem fixed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I had it on ATT Phone and then switched it to ATT LTE. Issue wasn't resolved. I tried the other APNs as well. Same result.
For poops and giggles I flashed the most recent nightly 05/06 and still had the same issue.
May seem silly to ask, but how do you flash the modem? That sounds like it could be a solution.
Edit: Ermm what radios did you flash to fix the problem?
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
LoSt180 said:
Looking more like you need the latest UCMC1 radio. Happened with a big kernel update in the nightlies, since this is getting closer to stable, I'm sure we'll see this problem more as more people start updating.
http://forum.xda-developers.com/showpost.php?p=40731838&postcount=594
Click to expand...
Click to collapse
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
b2tracken said:
Yea, I flashed that one after I found it on a post about the radios. It fixed the problem to an extent. However I'm getting much weaker signal than usual (although this could be the bars not displaying properly maybe, I don't want to jump immediately to a conclusion) and also am getting the data bars greyed out which means it's not.
Do you recommend reflashing the radio again?
Click to expand...
Click to collapse
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
wickm said:
b2tracken,
Just wanted to say thanks for your post here and that I'm experiencing the same exact thing. Yesterday I upgraded my skyrocket from an old ICS install to the latest 4.2.2 with CM 10.1, coincidentally right when this RC1 came out, so I quickly upgraded from M3 to RC1 last night. This morning I noticed that something was up with the radio and read your post. I flashed the radio to UCMC1 like you probably did and now I'm getting a connection, but about half as strong (in bars) as before the whole upgrade. Really no complaints yet - it hasn't hindered phone calls or mobile data connection - but I would be interested to find out if there is anything I can do to improve it, or configure it properly. I'm a big noob when it comes to phones.
Thanks,
Chad
Click to expand...
Click to collapse
The only other thing that I have changed is going and changing the APN under mobile networks to ATT LTE from ATT Phone. I'm getting about half signal also and intermittent issues with it greying out. (They seem to have not been very prevalent.) Seems that I'm not the only one with the issue which is fortunate. Give that a shot. Hopefully it gets worked out in the next release.
Att ucmc1 apn
SO I've uploaded the original UCMC1 stock ATT APN, you can just create a new APN and set it like these images.
Also wondering, after you cleanup (format data, system, cache, dalvik cache), No reboots, you do the next in the following order:
1-flash UCMC1 Radio
2-flash CM10.1 ROM (I'm still on 04/23 and everything works: http://forum.xda-developers.com/showthread.php?t=2272261)
3-flash gapps from 20130301 (http://goo.im/gapps)
Good luck,
Don't forget to hit THANKS if I helped you
Having the same exact issue, I've done everything stated here, only thing i did differently was updated the radio after CM.
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
b2tracken said:
Well the problem came back randomly with RC2 to an extent.
Now everything is showed as greyed out and no connection available including wifi.
Anybody have a clue on this?
Click to expand...
Click to collapse
Use a sock based Rom. 4.2 drops data and has all sorts of issues.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
topprospect said:
+1. UCMC1 should be used on all current CM10.1 builds. Any older radios will cause major problems with the newer JB-based blobs we use in CM10.1 past around 4/24.
One caveat: I don't know about Rogers users, sorry guys. If you have an official JB release from Samsung, you should use that radio. (Otherwise you will have to use UCMC1)
Click to expand...
Click to collapse
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
LoSt180 said:
In case it was missed, strait from the horse's mouth:
http://forum.xda-developers.com/showpost.php?p=41349665&postcount=2648
UCMC1 Radio: You must have the latest radio/modem installed or you will experience problems.
http://forum.xda-developers.com/showthread.php?t=2228292
Click to expand...
Click to collapse
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
No need to root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I'm aware. I'm already rooted, I just wanted to know if it's worth it to go back to stock then try to redo everything.
You said re-root. You don't need root to flash roms.
And probably not, cm is all busted right now anyways and data drops, reboots and all the other stuff is gonna happen regardless.
xcrazydx said:
You said re-root. You don't need root to flash roms.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
b2tracken said:
Well I would have to reroot if I took it back to stock. Thus the reroot etc etc
Click to expand...
Click to collapse
No you wouldn't
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
b2tracken said:
It seems no matter what I have issues. Now I'm having more issues with RRs and general crashes that force me to clear completely. I updated the radios but still had issues after. Almost thinking going back to square 1 and rerooting etc etc.
Click to expand...
Click to collapse
What nightly are you on? Anything after 4/23 (including the RC's) will have a lot of those instability issues. The developers are working hard to fix it if you want to read the development thread.