Database Info

[Stock][ROM][Odin] Galaxy Y Pro GT-B5510 firmware packages

Flashable Firmware Packages for the Galaxy Y Pro GT-B5510 Enjoy !
Temporary if your phone is bricked: http://lmgtfy.com/?q=GT-B5510+Odin+firmware+download
you can find the firmware on google!
I will update this thread as soon as possible
GT-B5510 Odin firmware download

Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin

Press thanks if it helped you Thanks in advance

fail!
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!

who pass?

djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
That's weird I got those form sammobile maybe that's the problem I think you need to use this tool in order to work: http://forum.xda-developers.com/showthread.php?t=1611225 I am sorry I tought these package were working but if no one passes then I need to remove this thread.
But anyway did you download my odin and followed my instructions 100%?
Also don't use PIT or tik anything else just do what I said in the tutorial

And sorry I added a line to tutorial forget to say that you need to enter download mode first but I think you did that ?

GianniDPC said:
Tutorial:
1. Start ODIN
2. Turn of your phone so that to go to Download Mode. The download mode can be entered by pressing Volume down Key + OK button, and holding both simultaneously press the Power Button.
2. Choose PDA and select the downloaded File (SS_DL.dll not needed 'delete it')
3. Leave everything as it is and click 'Start'
4. On your phone follow instructions after flashing is complete
Odin download: Odin
Click to expand...
Click to collapse
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...

djbasspower said:
i did it exactly as above... fails to write every time
i tried with every usb port i have but it doesn't work...
Click to expand...
Click to collapse
Ok do you have KIES installed if not Install it (Maybe reinstall it)
Make sure KIES is closed when ODIN is opened (another thing I recommend to do is go to recovery on your phone and wipe data factory reset and wipe cache) Then try again

Hi, i just bought a new Galaxy y pro.
I'm Italian and my current fimware is XXKJ4 ...
I want update it but kies doesn't find my phone, i try to reinstall kies, with another PC but is the same...
What is the lastest or the best firmware for this phone?
Also, when i try to flash with Odin, give me a FAIL
Please, help me ! thanks

I have the answer for the problem!
Ok everybody these firmwares are no ready to use with ODIN, that's the problem. You need to convert these KIES firmware to ODIN ready to flash files with Doky73's tool --> SplitFUS2 or request him the firmware in this threat.
And please don't forget to say thanks to Doky and me

Which ROM to use for a B5510 bought in Czech Republic?

djbasspower said:
Hi!
Thanks for the os!
I tried the tutorial above a couple of times but odin gets the following error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> B5510XXKJ2_B5510OXAKJ2_B5510XXKJ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have a galaxy y pro gt-b5510.
android version 2.3.6
basehand version b5510xxkj2
kernel version [email protected] #16
build number gingerbread.xxkj2
i've entered in download mode, the display confirmed with:
odin mode
product name: gt-b5510
custom bin down: no(0 counts)
current bin: samsung official
Downloading...
do not turn off target!!
any suggestions?
thanks!
Click to expand...
Click to collapse
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
---------- Post added at 01:02 AM ---------- Previous post was at 12:29 AM ----------
pshaww said:
I ran into this thread and tried the same thing. After much searching, I found references to this thread and/or this tool to use. It looks like the problem with this firmware is it is all in one package, and needs to be split. See the links below:
http://forum.xda-developers.com/showthread.php?p=26251171 - look at reply #6
http://fahmi1597.blogspot.com/2012/08/android-how-to-split-onepackage.html - how to split a .tar.md5 file into the subpackages, if it is all in one.
Click to expand...
Click to collapse
I can confirm it works fine using Odinatrix (from the second link above. I used the firmware mentioned in this thread. (by the way, the OP didn't mention it is password protected - password is 'android'). I let Odinatrix split up the firmware - super easy to use, just follow the instructions in the second link above.
I then flashed CSC, MODEM, and PDA - nothing else. I didn't repartition - just left at auto reboot and f. reset time. Now flashed fine and is restarting.

AN ADVICE
Hello sir...maybe your tutorial will be better if you can give us some photos/ScreenShots of flashing steps...
:highfive:

aligh9 said:
Thanks a lot
This is what you wanted:
PDA: B5510JPLI1
PHONE: B5510XXLH3
CSC: B5510OJPLF1
Sent from my GT-B5510 using Tapatalk 2
Click to expand...
Click to collapse
@OP.. I am asking in place of him as he still doesnt have 10 posts to post here.. Can you please kindly upload U.A.E firmware B5510OJPLF1 which is available in samfirmware.com.. Thank you..

Sorry, but rom with Italian language ?

These firmwares are not flashable with Odin (Gives you an error) search the Internet for the right packages (you should succeed I fixed a friend his Galaxy Y Pro with that)
EDIT: I will try to update this thread even if I have a Xperia Mini now.

why is this in s5360 thread? :laugh:

zenxus31 said:
why is this in s5360 thread? :laugh:
Click to expand...
Click to collapse
well, you can report it..
Its in sgy section because all variants of sgy like duos , pro duos, pro come under sgy section.. so.. I guess it can be moved to duos development section.. but no harm if its here..
____________________________________
“If you wait to do everything until you’re sure it’s right, you’ll probably never do much of anything.” –Win Borden

i Tried flashing My galaxy Y pro with ODIN but it keeps Stucking i recovery img all the time, tried different ports and only 1 worked
is there any help ?

[Q] Please Help. I soft bricked my Samsung Galaxy Tab P6200

I rooted my tablet (p6200) days back and installed CM9 to try it. I was quite happy, but somehow I decided to get back to my Stock ROM. I tried the method written here :
mobilecon.info/flashing-rom-honeycomb-3-2-at-samsung-galaxy-tab-7-plus-p6200.html
Instead of uploading the StockROM (using Odin) in PDA, I accidently clicked Phone. It took an hour and rebooted.
But after then nothings happening: It tries to load CM9 only and not the stock ROM and stops at a screen which says "Encryption unsuccessful".
After that I am trying to re install stock ROM using ODIN in PDA mode but it gives the error as pasted below.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200DDKL2_P6200ODDKL1_P6200DDKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!!!! I am sad.

P6200
I have the same problem... You found something to fix it??

techsavy.ravi said:
I rooted my tablet (p6200) days back and installed CM9 to try it. I was quite happy, but somehow I decided to get back to my Stock ROM. I tried the method written here :
mobilecon.info/flashing-rom-honeycomb-3-2-at-samsung-galaxy-tab-7-plus-p6200.html
Instead of uploading the StockROM (using Odin) in PDA, I accidently clicked Phone. It took an hour and rebooted.
But after then nothings happening: It tries to load CM9 only and not the stock ROM and stops at a screen which says "Encryption unsuccessful".
After that I am trying to re install stock ROM using ODIN in PDA mode but it gives the error as pasted below.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6200DDKL2_P6200ODDKL1_P6200DDKK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please help!!!! I am sad.
Click to expand...
Click to collapse
Use repartitioning
The only way to fix this is to repartition your phone with a .pit file that has been designed not to use the the corrupted sectors of your internal storage.IMPORTANT NOTE : Remove your SD Card and SIM CARD PleaseRun ODIN IN ADMIN Modea) Now you have to repartition your tab plusb) Download the following (Importantly the .pit file)
Pit.file p6200

To know which pit files u have to use, scan your sd card for bricked blocks, with a tool you will find in the link below. Repartition you sd card afterwards with the specific pit file for your bricked blocks.
Otherwise you will lose 15gb of your storage. 1gb left.
You will also find a tutorial for swapping internal and external storage for taht case in thelast post.
Tutorial with links and information here: http://forum.xda-developers.com/showthread.php?p=31897110
Hit thanks!
Sent from my GT-P6200 using xda app-developers app

Bad2hold said:
To know which pit files u have to use, scan your sd card for bricked blocks, with a tool you will find in the link below. Repartition you sd card afterwards with the specific pit file for your bricked blocks.
Otherwise you will lose 15gb of your storage. 1gb left.
You will also find a tutorial for swapping internal and external storage for taht case in thelast post.
Tutorial with links and information here: http://forum.xda-developers.com/showthread.php?p=31897110
Hit thanks!
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
mine to.... have i do the same thing ??
hai everybody.... i'm from indonesia.., my friend just give me samsung galaxy tab 7 plus... ( GT-P6200 ) without any boxes, last day i try to get ICS update from kies , but the application won't update my firmware , so i try the alternative direction.
i try another application - Odin3-v1.85 and download the firmware..., but the fact is after few second running it self , the prosess can't continues get fail after
<ID:0/017> Firmware update start..
<ID:0/017> cache.img
<ID:0/017> NAND Write Start!!
<ID:0/017> factoryfs.img
<ID:0/017> hidden.img
<ID:0/017> recovery.img
<ID:0/017> Sbl.bin
<ID:0/017>
<ID:0/017> Complete(Write) operation failed. >>> FAIL...
anyone can help me .... please
HOW to scan the sdcard , my tab can't load boot , i can run recovery mode to ....?? so how to chose the right one ??

Confused
devid801 said:
Use repartitioning
The only way to fix this is to repartition your phone with a .pit file that has been designed not to use the the corrupted sectors of your internal storage.IMPORTANT NOTE : Remove your SD Card and SIM CARD PleaseRun ODIN IN ADMIN Modea) Now you have to repartition your tab plusb) Download the following (Importantly the .pit file)
Pit.file p6200
Click to expand...
Click to collapse
******************************
Hiya mate,
I downloaded the .PIT file and got two folders, one says Patched and the other is Stock, and I don't know which to go for.
Stock gives me one file, the patched gives me awful lots and with different sizes, sizes for what; I don't know.
Can you help me with that??
**Note: My tab reboots after showing the Samsung Logo for a few seconds.
**I also tried installing the stock ROM using Odin which I downloaded from the samfirmware website and it still does the same thing.
Regards
Earle

[S5301][GUIDE]how to root the Galaxy Pocket Plus S5301

Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:

thank you very much
I'll try it but does it has Arabic language ??

I don't remember, but i think it does.

Don't work to me, apear modem error and stop odim
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

dragaoheremita said:
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Confirm that Kies is not running.

panda00 said:
Confirm that Kies is not running.
Click to expand...
Click to collapse
Kies is ok, im put back my phone with odin 3.07, and recovery.

Can anyone help me pls?
Is there any custom rom or if i root the phone can i disable that fuction?
http://forum.xda-developers.com/showthread.php?p=44391342#post44391342http://forum.xda-developers.com/showpost.php?p=44391342&postcount=1

avicohh said:
Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:
Click to expand...
Click to collapse
Dear @avicohh
Can i return back to my stock rom? If yes then how???
reply plzzzz

Yes.
Just flash stock rom.
Sent from my Nexus 5 using Tapatalk

firmware odin

<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMB2_N8010O2UCMB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do?

rawarauf said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N8010XXUCMB2_N8010O2UCMB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> tz.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do?
Click to expand...
Click to collapse
Unplug
restart Odin
Reboot tab to download mode
plug in tablet
run Odin again
Happens from time to time
Also may want to redownload the file if it happens again just to be sure
Also, do you own an 8010? Just checking since you're flashing an 8010 file

What's that bit about "Get PIT for Mapping"
That shouldn't be there. You might have to give us some more info

ODIN always runs "get pit for mapping"... Don"t scare the poor guy...
If you don't know something don't answer, you could be the cause of another person's brick...
You don't need to worry about that.
Most bad flashes through ODIN are done because of user error. A lot of times the rom being flashed is corrupt. If it has an MD5 sum, you should get an MD5 checker and make sure the rom file isn't corrupt..... Try a different edition of ODIN, I've used 3.07 where 3.03 didn't work, same file, same cable and same tab... Worked fine...
Unless you've checked re-partition when you flashed, it looks like a bad sector on your NAND. You may need a pit file to correct but be VERY careful if you flash one of these as this is a definate brick if it is corrupt or for the wrong device....

I dont know how to add a pit file
ultramag69 said:
ODIN always runs "get pit for mapping"... Don"t scare the poor guy...
If you don't know something don't answer, you could be the cause of another person's brick...
You don't need to worry about that.
Most bad flashes through ODIN are done because of user error. A lot of times the rom being flashed is corrupt. If it has an MD5 sum, you should get an MD5 checker and make sure the rom file isn't corrupt..... Try a different edition of ODIN, I've used 3.07 where 3.03 didn't work, same file, same cable and same tab... Worked fine...
Unless you've checked re-partition when you flashed, it looks like a bad sector on your NAND. You may need a pit file to correct but be VERY careful if you flash one of these as this is a definate brick if it is corrupt or for the wrong device....
Click to expand...
Click to collapse
I downloaded the firmware 2 times it give the same error for both of them
I tried two version of Odin 3.04 and 3.07
i didnt try MD5 checker but i will try it if it is needed
I want to try a pit file but I don't know how to do it ,
Also I own a GT-N8013 which is the US version of Galaxy Note 10.1 i think this shouldnt be a problem to Flash United Kingdom Version since they are same device .
Thanks a lot for your help

Honestly, you DON'T want to try a pit file... Fastest way to brick your device...
Did you try using Mobile ODIN?
This means you do need to root your device but I found it seems to work a hell of a lot better than PC ODIN....
What I would do is restock original firmware then root device. This will raise the flash counter but then run triangleaway....
Load the rom file you are trying to flash onto an sd card and put it into the Note.
Make sure you use Mobile ODIN PRO as you can now flash the new OS and remove root if you want to going back to stock UK rom...
Flash away...
You should be "Official" in all statuses, both bootloader and settings with no flash count...
And trust me, if you start playing around with a pit file you are going to regret it....

Recover from soft brick

Hello everybudy here is a guide to recover from soft brick(I ave only tested it on S7500 not other)
So do it at ur own risk
First download odin3 v1.85
Download stock firmware for ur cont
Extract both in a particular folder
Open odin
Go to Download mode in ur phone and press volume up
Connect ur phone to pc
If odin shows a yellow mark then u are ready to proceed
Mark PDA & and selct file
Click start in odin
Keep patience
After process is over odin will show pass
Now ur phone will reboot
(DO NOT REMOVE USB CABLE TILL ITS REBOOTED PROPELY)
Complete the setup
Now again switch off mobile as as the process has not been completed yet
Go to recovery mode (this time it would be stock recovery not cwm)
In recovery mode select wipe data factory reset and wipe cache partition
Reboot.
Now u are done!!
HIT THANKS IF I HELPED
Odin-http:// www.androidlegend.com/dl/Odin3_v1.85.zip
Stock firmware(pda)- http://www.tsar3000.com/Joomla/inde...ace-plus-firmwares&catid=55:samsung&Itemid=82
Sent from my GT-S7500

whats new in this there is a sticky in which hole process is shown correctly
and 1 thing -
you should edit PDA ...it is different for different countries
you provided the firmware which is not for Indian users
http://www.sammobile.com/firmwares/
this is were you can get firmware for your own country !!

Ok i have edited pda and u can check the link
Also, I am a Indian and have tried this and its almost same
Only we have to change the language
Thanks any way
Sent from my GT-S7500

I had searched but it was not in q n ans. So i put it in this section. I dont know about stickies as i am new to this
Sent from my GT-S7500

There has also a type of soft brick where you will not be able to access download mode. Then odin will not work
then use USB jig. See http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/

Ya i know
Sent from my GT-S7500

[email protected] said:
Ya i know
Sent from my GT-S7500
Click to expand...
Click to collapse
I know that you know. It was not mentioned so I mentioned it.

Itz showing fail please help asap!!!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DDMF2_S7500ODDMF1_S7500DDME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried its coming failed,i tried downloading odin and firmware again from sam mobile, evn removed kies still the same please help asap!!

Ashmit Poojari said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DDMF2_S7500ODDMF1_S7500DDME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried its coming failed,i tried downloading odin and firmware again from sam mobile, evn removed kies still the same please help asap!!
Click to expand...
Click to collapse
Keep Odin open and change USB ports, remount the PDA & flash. Hope this helped, worked for me