Database Info

Odin Error

I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH

[email protected] said:
I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH
Click to expand...
Click to collapse
Dont flash pit file if u only have 1 package firmware file.
go find atleast 3 files package firmware and reflash. I dun know which is for DD...region, for me is DXKE1.
Pit file will repartition you phone, so you lost your recovery partition.
Sent from my GT-I9003 using Tapatalk

So, i put a ROM in it with 3 files with PIT, And Then i put the 1 file without PIT and re-partition unchecked...?? Correct.??
1 Q have i lost my USB Data by re-partitioning.?

Flash pit>boot to download mode>flash stock rom>done
Cheers
Sent from my GT-i9003 powered by VurrutRom

Getting this and a FAIL with red background and in phone download stuck at almost 100%
Flashing XXKPE.....
RE-trying download.....
Tried Checking Phone Bootloader Update....no progress......
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> normalboot.img
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> system.rfs
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..

crk1995 said:
u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..
Click to expand...
Click to collapse
isnt that russian firmware.?

Kpe should be ok. Try flash using diffrent odin version. Try v1.85, it is ok to me or v1.83 from sammobile.
If fail. Try use different usb port.
But first. Uninstall and reinstall the samsung driver.
Sent from my GT-I9003 using Tapatalk 2 Beta-4

Excluding the bootloader file...(XXKPE) dide the trick now my phone works....updating via Kies.....now

[Q] HELLUP! Firmware upgrade encountered an issue. Please seclect recovery mode in Ki

Firmware Upgrade encountered an issue. Please select recovery mode in Kies & Try again.
I have this problem with my Samsung Galaxy Tab 7.7 wifi
Saw several site and I also use Odin 3 v1.85 but I can nog fix it.
Does anyone has a solution PLEASE??.

Hi,
If u hv made a nand backup... restore it from cwm.
If not, get yr original ROM and reinstall thru odin.
Then reroot and reinstall CWM & install yr prefered ROM/kernel.
Hope it helps.

skycruzer said:
Hi,
If u hv made a nand backup... restore it from cwm.
If not, get yr original ROM and reinstall thru odin.
Then reroot and reinstall CWM & install yr prefered ROM/kernel.
Hope it helps.
Click to expand...
Click to collapse
Hi,
It look like it doesn't get connected to the device.
I need the orgibnal Rom for the device I found a lot on the internet but nothing works though Odin.
Where can I find the orginal Rom.
Regards,
P. Derksen

plsderksen said:
Hi,
It look like it doesn't get connected to the device.
I need the orgibnal Rom for the device I found a lot on the internet but nothing works though Odin.
Where can I find the orginal Rom.
Regards,
P. Derksen
Click to expand...
Click to collapse
Try sammobile...

I have this problem with my Samsung Galaxy Tab 7.7 P6800. I've never tried to flash any custom rom. I was trying to upgrade from HC to ICS official firmware P6800XXLQ2/P6800OXALQ2/P6800XXLPW/P6800XXLQ2. I've tryied several times with odin3 v1.85 and always fail. I've tried again the original HC P6800XXLA4_CSC_TPH and still fail. And always in the end.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6800OXALQ2_P6800XXLQ2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> cache.img
<ID:0/006> NAND Write Start!!
<ID:0/006> factoryfs.img
<ID:0/006> hidden.img
<ID:0/006> recovery.img
<ID:0/006> Sbl.bin
<ID:0/006> zImage
<ID:0/006> modem.bin
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've searched along the forum and found no more solutions. Can anybody help me? Are there some more instructions to use in odin, another odin version or another program?
Thanks in advance.
I've solved the problem.
Used a wrong pit. Saw the solution not in Galaxy Tab 7.7 Q&A, Help & Troubleshooting but in general.
So thanks again for the magnific forum.

P6810 Odin fail

Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!

bajki_ktm said:
Hello guys,
i have problem with my P6810 16gb Wifi tablet, the problem started when i flashed CWM touch and then my touch screen stoped working so i tried to flash firmware and i got odin fail, from then when i turn it on it says "Firmware upgrade encountered an issue.Please select recovery mode in Kies & try again"..
Odin message:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P6810OZSLP8_P6810ZSLP8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
How can i fix this problem?
Cheers!!
Click to expand...
Click to collapse
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....

cakrabayu said:
If you have kies installed in your computer, please try to disable or uninstalled it. As I know, Samsung KIES and ODIN could not get along with together....
Click to expand...
Click to collapse
I don't have installed KIES..

Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800

cakrabayu said:
Sorry....Did you follow this guide while using odin? http://forum.xda-developers.com/showthread.php?t=1469635 just wondering why you encounterred a problem. Thx.
Sent from my GT-P6800
Click to expand...
Click to collapse
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?

bajki_ktm said:
I was doing everything like in tutorial, tablet was full charged and i got this error, that's the story..
What could possibly go wrong?
Click to expand...
Click to collapse
Really sad about your problem bro.... something wrong with the procedure or your firmware.. there are many cases like you.. you can refer to :
http://androidforums.com/samsung-ga...help-firmware-flashing-failed-using-odin.html
http://forum.xda-developers.com/showthread.php?t=1877308&page=2
http://forum.xda-developers.com/showthread.php?t=1984717
http://forums.whirlpool.net.au/archive/1919243
but it is up to you to give it a try. Luckily for me, I did not encounter the same problem like yours while flashing with pc odin. I prefer using mobile odin. it is safe and easy. Good luck bro...

I am having the same issue on my P6810 (16gb). I cannot use the emergency recovery in Kies because I don't have the recovery code that it asks for (I bought the device as used faulty so don't know the update history). When I try to use the firmware upgrade / initialisation function to reset the tablet, Kies downloads the firmware but fails to connect to the tablet when I plug it in (in download mode, which I can access).
I have tried flashing a downloaded firmware using Odin3 v1.85 and it appears to start okay and copies cache.img but quickly hangs at the factoryfs.img stage.
I have tried different both win7x64 and winXP PCs with no success. I did try Heimdall, which uses a different USB driver, and while I did not have an appropriate Heimdall compatible firmware to flash, I was able to get a display of the current PIT information, so the tablet was communicating OK.
Does my device need repartitioning? I have seen many references to a PIT file, but don't know where to download it from.
This seems to be a common problem from what I can tell so far.
Any help appreciated.
Thanks.

Hello i have the same problem. I read all of your suggestions and guess that should be use a pit-file. Is this overwrite a system. I have troubled ROM compiled and want to install the new one downloaded from sammobiles fo my country. Am I right? Please help me?

[S5301][GUIDE]how to root the Galaxy Pocket Plus S5301

Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:

thank you very much
I'll try it but does it has Arabic language ??

I don't remember, but i think it does.

Don't work to me, apear modem error and stop odim
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

dragaoheremita said:
Here Odim check
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5301XXAMC1_S5301SERAMB1_S5301XXMC1_HOME_ROOTED.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> BcmCP.img.md5
<ID:0/012> NAND Write Start!!
<ID:0/012>
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Confirm that Kies is not running.

panda00 said:
Confirm that Kies is not running.
Click to expand...
Click to collapse
Kies is ok, im put back my phone with odin 3.07, and recovery.

Can anyone help me pls?
Is there any custom rom or if i root the phone can i disable that fuction?
http://forum.xda-developers.com/showthread.php?p=44391342#post44391342http://forum.xda-developers.com/showpost.php?p=44391342&postcount=1

avicohh said:
Hi Evryone.
Until somebody will release CWM Recovery or any root method for the galaxy pocket plus, I managed to create a pre-rooted firmware.
This firmware base on the last build for S5301, is a full firmware exactly like the original, except the root.
after flash you will see the SuperSU app in the app drawer.
flashing this firmware do not doing wipe data. you will not lose anything.
also, this flash not increase your download binary count.
This file will work on any firmware/baseband/csc. you can always flash it like a stock firmware.
base on - XXAMC1.
PDA - S5301XXAMC1
PHONE- S5301XXMC1
CSC- S5301SERAMB1
Android version: 4.04
Download
https://mega.co.nz/#!qQ8B2BxZ!fhAggBRAzvsPzYejncA_Zlbkf-9r6UhPGU1BBYlbHqw
Installation instructions
install samsung usb drivers from here.
Download the 7z file above and extract it (with winrar or 7z) to some folder, you should receive a tar.md5 file.
Open odin 3 (attached in the zip)
Put the tar.md5 file in pda.
Put the device in download mode. (vol down + home + power button, and then click on vol up)
Connect your phone to usb and wait for odin detect the device.
Click start.
Enjoy
If you want to thank me for this work, you can do this by donating.. :good:
Click to expand...
Click to collapse
Dear @avicohh
Can i return back to my stock rom? If yes then how???
reply plzzzz

Yes.
Just flash stock rom.
Sent from my Nexus 5 using Tapatalk

Problems using philz_touch files to root tab

I'm trying to follow this thread to root my tab but something is going wrong. I have downloaded the latest for my tab, load the philz_touch_5.0.5-p1143.tar.md5 in odin and have put the zip on my external sd card. The issue is the firmware never seems to load correctly in the first stage to get me to the point that I can continue on to step two which is flashing the zip file from the sd card. I start odin and load the tar file with pda selected, boot the tab into download mode and connect it to the computer. Odin shows it connected and i click start...after a few seconds and showing progress of it uploading the file it says passed with a green box and reboots the tab for me. Now I'm suppose to go to step two and use the new recovery that should have been uploaded to flash the philz_touch zip file but it's the same old factory recovery and not the new one that odin was suppose to upload so i can flash from the sd card.
Hardware: P5113
Ver: 4.1.1
This is the thread i'm following:
http://forum.xda-developers.com/showthread.php?t=1657056
These are the files i'm using ..the tar and zip for p5113
http://d-h.st/users/philz_touch/?fld_id=16057#files
Any help would be appreciated. I'd like to root this tab, take a nandroid backup and flash a new rom like CM to it.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_5.08.5-p5113.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/004> Removed!!
<ID:0/003> Added!!
As you can see it seems successful, the box turns green and says passed but booting into recovery mode for step two still has the factory one and does not have an option to install zip from sdcard ..just the usual upgrade.

Use CF-Auto Root
http://forum.xda-developers.com/showthread.php?p=33303103
Sent from my GT-P5113 using xda premium