Database Info

can anyone help me fix my phone with team viewer?

SOLVED - you have got to be kidding me though. i had 2 faulty cables, one was my original cable and another a brand new one. so i used one of my friends and it worked fine. I HATE ELECTRONICS
my drivers dont work and my phone is stuck in boot loop and i CANNOT get into recovery
i just need someone that can get me back to stock :[
PM ME if you can help
heres my problem thread
http://forum.xda-developers.com/showthread.php?t=1353314
VIDEO showing boot loop (same thing if i try 3 button recovery)
http://www.youtube.com/watch?v=n3ALNj5q-hY
VIDEO showing download mode + odin , USB NOT RECOGNIZED usb error 43 device has stopped working
http://www.youtube.com/watch?v=D4CnRnecNrQ
i have deleted all drives so someone can help me fresh

rsx19 said:
my drivers dont work and my phone is stuck in boot loop and i CANNOT get into recovery
i just need someone that can get me back to stock :[
Click to expand...
Click to collapse
Restart your computer and then pull the battery out of your phone and put it back in. Now on your computer open Odin and then hold vol+ and vol- and plug in the USB cord this will put you in downlaod mode. And use Odin to get you back to a stock rom
Currently Fusionized

Wdustin1 said:
Restart your computer and then pull the battery out of your phone and put it back in. Now on your computer open Odin and then hold vol+ and vol- and plug in the USB cord this will put you in downlaod mode. And use Odin to get you back to a stock rom
Currently Fusionized
Click to expand...
Click to collapse
ive had this problem for a week now, it doesnt seem to be that simple. installing new drivers doesnt work, using different usb ports dont work, going into download mode doesnt work, thats why i need someone to try it for me cause i just cant figure it out

there has to be somebody!

Have you read this post ?

studacris said:
Have you read this post ?
Click to expand...
Click to collapse
not related to my post. can anyone help me on teamviewer?

bump + op update

not sure what someone would be able to do remotely to help you with a device you hold in your hand......why havent you tried Heimdall method? ODIN sucks.

Pirateghost said:
not sure what someone would be able to do remotely to help you with a device you hold in your hand......why havent you tried Heimdall method? ODIN sucks.
Click to expand...
Click to collapse
doesnt work either cause my phone isnt recognized by the computer at all so ANYTHING usb based doesnt work and i cant get into recovery so that doesnt work either, i mean i have to be doing something wrong right? the phone cant be dead

Heimdall uses it's own driver so Jake you install that and uninstall all the others, SO that may help with the recognition issue, as the stock closed source driver can be a douche sometimes...like in your case.

studacris said:
Heimdall uses it's own driver so Jake you install that and uninstall all the others, SO that may help with the recognition issue, as the stock closed source driver can be a douche sometimes...like in your case.
Click to expand...
Click to collapse
there is nothing in the drop down menus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

bump, would be great if someone could help me tomorrow night so i can use my phone in a presentation

rsx19 said:
bump, would be great if someone could help me tomorrow night so i can use my phone in a presentation
Click to expand...
Click to collapse
I've seen that error code 43 on my machine when there's a larger USB issue. Usually two things will correct that - a reboot and switching USB ports.
I would also suggest (if you haven't already) uninstalling all of the drivers you have installed - Samsung- or Heimdall-related, then reboot, then do the Heimdall again.

jmtheiss said:
I've seen that error code 43 on my machine when there's a larger USB issue. Usually two things will correct that - a reboot and switching USB ports.
I would also suggest (if you haven't already) uninstalling all of the drivers you have installed - Samsung- or Heimdall-related, then reboot, then do the Heimdall again.
Click to expand...
Click to collapse
ive tried reinstating and tried all 4 of my laptop ports and all 12 or 14 of my desktop ports. ive tried installing all the different drivers users gave me but that never helped. and as you can eee i cant even install the heimdall drivers
either both my desktop and laptop have something wrong with them or its a user error, thats why i want someone else to help me through team viewer, this thread is moving to slow for me to get anything done

I'll ask the obvious question, just to make sure - Have you tried a different cable?

jmtheiss said:
I'll ask the obvious question, just to make sure - Have you tried a different cable?
Click to expand...
Click to collapse
yup yup that i have done

Ok, I took a quick look at the videos in the OP. Two things I noticed:
- You have the phone plugged in prior to putting it into download mode. It's possible you're just keeping the plug in after putting it there (couldn't see in the video). Try putting the phone in download mode, unhook the cable, then rebooting the computer (leave the phone in DL mode), then hook it up again.
- I saw that you have an ICS build. Do any button combinations get you to recovery (V+/V-/Power, V+/Power)? If so, you might be able to flash another rom.
- You may also want to look for AdamOutler's One-click Unbrick. That might be of some use in your situation.

jmtheiss said:
Ok, I took a quick look at the videos in the OP. Two things I noticed:
- You have the phone plugged in prior to putting it into download mode. It's possible you're just keeping the plug in after putting it there (couldn't see in the video). Try putting the phone in download mode, unhook the cable, then rebooting the computer (leave the phone in DL mode), then hook it up again.
- I saw that you have an ICS build. Do any button combinations get you to recovery (V+/V-/Power, V+/Power)? If so, you might be able to flash another rom.
- You may also want to look for AdamOutler's One-click Unbrick. That might be of some use in your situation.
Click to expand...
Click to collapse
at school writing 2 papers so ill have to try these when i get home
i put the phone in download mode with vol + - while plugging in the cord but ill try the others
no none get me into recovery,
could you link me that one?

rsx19 said:
at school writing 2 papers so ill have to try these when i get home
i put the phone in download mode with vol + - while plugging in the cord but ill try the others
no none get me into recovery,
could you link me that one?
Click to expand...
Click to collapse
Ok, I looked a little more at the one click unbrick, and since you can get to download mode, it doesn't look like the right solution. So.. nevermind that one.
As far as removing the drivers, it's something of a two-step process.
Step one is to plug the phone in, let Windows see it (even if incorrectly), and then go to device manager. From there, find the phone, and uninstall it/remove drivers. Then unplug the phone.
Step two is to go to "Programs and Features" and remove any android/samsung drivers that show up there.
Once you've done that, check to make sure any folders that drivers would have been unpacked into (mine is in C:\usb_driver) has all the Samsung or Heimdall drivers removed (BE CAREFUL WHILE DOING THIS - ONLY REMOVE SAMSUNG/HEIMDALL DRIVERS IF YOU'RE 100% CERTAIN).
Then, reboot the computer, re-run Heimdall to get zadig.exe to do its thing, then connect the phone.
Also, have you considered dual-booting (or using a USB live drive) of Ubuntu? Heimdall seems to be a little happier in Linux, but you'll just need to make sure that Java installs with it.
There's also a really slim chance that if you hook the phone up in download mode, ADB might detect it enough to where you can give the "adb reboot recovery" command.

jmtheiss said:
Ok, I looked a little more at the one click unbrick, and since you can get to download mode, it doesn't look like the right solution. So.. nevermind that one.
As far as removing the drivers, it's something of a two-step process.
Step one is to plug the phone in, let Windows see it (even if incorrectly), and then go to device manager. From there, find the phone, and uninstall it/remove drivers. Then unplug the phone.
Step two is to go to "Programs and Features" and remove any android/samsung drivers that show up there.
Once you've done that, check to make sure any folders that drivers would have been unpacked into (mine is in C:\usb_driver) has all the Samsung or Heimdall drivers removed (BE CAREFUL WHILE DOING THIS - ONLY REMOVE SAMSUNG/HEIMDALL DRIVERS IF YOU'RE 100% CERTAIN).
Then, reboot the computer, re-run Heimdall to get zadig.exe to do its thing, then connect the phone.
Also, have you considered dual-booting (or using a USB live drive) of Ubuntu? Heimdall seems to be a little happier in Linux, but you'll just need to make sure that Java installs with it.
There's also a really slim chance that if you hook the phone up in download mode, ADB might detect it enough to where you can give the "adb reboot recovery" command.
Click to expand...
Click to collapse
ill also try ubuntu since i do have it on a usb drive. my paper isnt getting written well..ll sigh

[Q][Help]Nexus S major problems

SOLVED
Well I hope my Nexus S didn't brick. Well I will start off with what happened. I've been running ICS Slim for a while and I noticed it started to become very buggy. Been busy for a few days so I havnt had time to fix anything. Well today I had some free time so I was going to just connect my SNS to my pc to transfer important files and pictures. My PC (Windows 7) kept giving me "USB Device not recognised" errors. I have correctly installed the adb drivers and have connected my SNS to the same computer. I also tried another connection usb cable to see if my original was defective but no avail. I also tried my netbook with both usb cords becuase I also had this SNS connected to the netbook before (Win7 Also) with correct adb drivers.... still nothing. I then go to rom manager download codename android and successfully install the rom. Tried everything again and still no connection. After shutting down the SNS and strating it again multiple times and trying multiple things my SNS went into "safe mode". Curious I thought there must be something wrong with some system files that don't get written over when a new rom is installed with a factory reset. I decided to turn off my SNS and turn it on one more time and I get this screen which ive never seen before.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It also says between Downloading.... and Do not turn off target!!!!:
USB Control Init
USB Control Init end
Please help because I need this phone for work and I cannot afford a new one... Just really hope it didnt bite the dust.
Samsung Nexus S i9020a Koodo
FIX:
had the same problem. DEFINITELY FIXED NOW.
Whenever, I connected my Nexus S to any OS a USB Storage Mode dialogue used to pop up and once I clicked Turn On, the PC would find the mass storage. About a week ago, this functionality has stopped completely. I plug the USB cable and nothing happens but the phone starts charging.
I have read many posts about this. I have tried the removing the battery, Rebooting, Trying the boot loader screen, erasing the USB storage, resetting to factory settings, Erasing and dismounting the SD Card from the Boot loader, cleaning the USB Port, trying different USB cables (nokia, parrot, original Nexus etc)....
What has worked for me was the NEEDLE trick. Get a needle and bend the USB hub beneath the phone towards to the top. (What I realized is that it was pushed all the way to the bottom, lifting it up about 1 mm has centered it). I plug the USB and pops up the USB storage mode interface.
So, it turns out a hardware issue, probably a doggy USB port on the NEXUS easily gets disturbed. Using different cables usually helps the problem, especially cheap cables tend to damage the port easier.
So, I would recommend every one to use proper USB cables; the original nexus cable, a nokia cable or decent quality cable. (Do not use the ones from cheap car chargers etc).
Secondly, do not reset your phone for nothing.
Thirdly, keep your phone clean.
I hope this information helps someone. Thanks.
Click to expand...
Click to collapse
source: http://www.google.com/support/forum/p/Google Mobile/thread?tid=4dedeb14b7ccb58e&hl=en

Update: Decided to turn off the Nexus S..... Stupid idea I guess because It wont turn on any more.... Plugging into a computer still says "USB Device not recognised" though so I have no clue...
Would really love some help please

Can you get into recovery? Or Hboot?

rocket999 said:
Can you get into recovery? Or Hboot?
Click to expand...
Click to collapse
No recover. Whats Hboot? No fastboot screen... So I thinks its dead.

Trying unbrickable resurrector but cannot find device
Desperate need of help please

do you have CWM installed on your nexus??
use mount/storage then connect it to Computer

galaxy tab p1000
this screen shot is the same of download mode in the galaxy tab p 1000, in this mode, with program "ODIN" you can put in your device the rom, kernel and radio! ww w.team overcome.net/p1000/?page_id=17 this is a guide for flash the p1000, i don't know if that function for NS ! I'm sorry.

[Q][Help]USB Problems
I just removed my simcard and reinserted it again and my phone started normally.... weird...
But still at problem #1. Cannot mount usb. Windows 7 Still says "USB device not Recognised". My guess is that the usb port is broken. Its quite common apparently so i'm gunna see if Koodo will fix it.
Before I send it in should I go to a stock rom, stock baseband, and lock bootloader. or can I send it in with CyanogenMod 9?

Tw1tchy said:
I just removed my simcard and reinserted it again and my phone started normally.... weird...
But still at problem #1. Cannot mount usb. Windows 7 Still says "USB device not Recognised". My guess is that the usb port is broken. Its quite common apparently so i'm gunna see if Koodo will fix it.
Before I send it in should I go to a stock rom, stock baseband, and lock bootloader. or can I send it in with CyanogenMod 9?
Click to expand...
Click to collapse
go back to stock and lock bootloader so they wont void your warranty

sean1984 said:
go back to stock and lock bootloader so they wont void your warranty
Click to expand...
Click to collapse
Thx but I fixed my USB port myself ! But if I ever have problems again I will remember what you said.
Posted my fix on the OP

nexus s usb not recognized
sir, plz help me i have a nexus s i9023 i have tired everything like format system boot sd card cache everything so i think that my nexus s should recognized windows after thes. but now nothing effect and i can acces anythink just fastboot or clockwork mod recovery i have also noticed that when i pluged usb cable on nexus s with computer it stays on charging but after on fastboot my laptop not recognized my nexus s but the charging option is enable so i can ensure that there is no hardware problem i have charged nexus s through data cable but not recognized on coclworkmod i have also try to unmout sd card or usbstorage but nothing effect plz help me

Thanks for the thread.
" Needle trick " worked perfect. [ lifting the usb charging pin - with a needle - on the phone so its center. ]

[Q] Bricked Phone after installing Xposed Module?

Hi, before everything, i'm sorry for my terrible english, I speak Spanish, if you can't understand something, please tell me.
My Xperia L bricked after I installed a Xposed Module, I had intalled many others before and it worked perfectly.
I wanted to install "MaxUnlock", before that, I had installed "MinMinLock" and then "MaxUnlock", I don't know if it does make the phone brick or if I wasn't suposed to install both.
Here's a list of root apps that the phone have installed:
-ROM Toolbox: Just changed bootanimation, a lot of times, but since yesterday I had the same and nothing happened.
-Xposed Installer with:
-Gravity Box: Changed Clock to the center of the notification bar, changed JB icons for KK icons on the notification bar & putted Facebook and Whatsapp to the app ring (holding the home button on the navbar.).
-Unicon: Changed UI Icons for other pack.
-Xperia Flip.
-APM: Added Reboot button.
-A module to see the Wifi password, don't remember the name.
-MinMinLock & MaxLock (both installed after brick, I think this is what bricked the phone, Wasn't I suposed to have both?)
-ScreenOffAnimation.
I Repeat, everything was ok after I installed MaxLock, but I listed all of the root things that I installed just to know if any of these could make a incompatibility or something. (I know, my english is terrible, sorry, if you can't understand something please ask me, I speak Spanish.)
Thanks Everyone! I hope it have a solution.

hi. did you tried to flash your rom once again? mabe by all the system tweaking that you had, you just got your rom broken..
and your english is very good man, don't think bad about it at all. it's better than mine, at least
Sent from my C2105 using Tapatalk

EternalXDA said:
hi. did you tried to flash your rom once again? mabe by all the system tweaking that you had, you just got your rom broken..
and your english is very good man, don't think bad about it at all. it's better than mine, at least
Sent from my C2105 using Tapatalk
Click to expand...
Click to collapse
Ok... So, how can I do that?
Because I don't have a backup of my ROM, and I don't know if I am doing something bad but Pc Companion doesn't recognize my phone and when I plug the phone on my PC it says that an unknown device has been connected
Oh, and for bricked I mean that the phone just keep on the bootanimation
Sorry if I do something bad bit I have never flash a ROM or something like that.

I assume that you're on stock firmware. download the latest firmware (its biuld number is X.X.17, search for it here on xda...)
download and install the FlashTool on your pc, then use it to flash the downloaded firmware into your phone. (there's few threads on how to do so.)
Sent from my C2105 using Tapatalk

EternalXDA said:
I assume that you're on stock firmware. download the latest firmware (its biuld number is X.X.17, search for it here on xda...)
download and install the FlashTool on your pc, then use it to flash the downloaded firmware into your phone. (there's few threads on how to do so.)
Sent from my C2105 using Tapatalk
Click to expand...
Click to collapse
Could you please link me one of those threads? Because I don't have much time...
I thank you a lot form the help, hope that my phone can be fixed

PeterLda said:
Could you please link me one of those threads? Because I don't have much time...
I thank you a lot form the help, hope that my phone can be fixed
Click to expand...
Click to collapse
Download the 15.3.A.1.17 firmware from here and here's the guide on how to flash it into your phone. and hit the thanks buttons. if you have time!

EternalXDA said:
Download the 15.3.A.1.17 firmware from here and here's the guide on how to flash it into your phone. and hit the thanks buttons. if you have time!
Click to expand...
Click to collapse
Hi, sorry but In the thread no one answers, and when I connect my phone holding vol-, Windows doesn't recognize it, also after the first time y holded vol- and plugging the phone, it stopped showing any light on the LED, when I plug the USB, it shows Red light, then green light and finally orange light it changes very fast and then it stop showing any light, what should I do? thanks for the help!
-----------------------
Oh, and I forgot, for a little time when I tried to turn on the phone or to charge, it didn't turned on or charge, just... didn't do anything
Know it turns in, obviously still bricked, stuck at bootanimation and charges normally.
So... how can I make flashtool work? Or at least make Wiindows recognize my phone
Thanks!

u wer going correct
PeterLda said:
Hi, sorry but In the thread no one answers, and when I connect my phone holding vol-, Windows doesn't recognize it, also after the first time y holded vol- and plugging the phone, it stopped showing any light on the LED, when I plug the USB, it shows Red light, then green light and finally orange light it changes very fast and then it stop showing any light, what should I do? thanks for the help!
-----------------------
Oh, and I forgot, for a little time when I tried to turn on the phone or to charge, it didn't turned on or charge, just... didn't do anything
Know it turns in, obviously still bricked, stuck at bootanimation and charges normally.
So... how can I make flashtool work? Or at least make Wiindows recognize my phone
Thanks!
Click to expand...
Click to collapse
u wer doing the right thing, the red to green light change signifies that u are in flashmode
the light goes off, dont worry u are still in flashmode
u will be out of flash mode after u have disconnected ur phone from ur pc

Have you installed xperia l drivers?
Check it. If it doesn't work after this, try it on an other pc.

Tidzsi said:
Have you installed xperia l drivers?
Check it. If it doesn't work after this, try it on an other pc.
Click to expand...
Click to collapse
How can I install them? I tried but I can't install the drivers, don't know how

Flashtool
Installed them from flashtool drivers setup.
But windows is still not recognizing them, so... I still have to try on another pc but I don't know if it will work.
Also, I was trying to install them manually but I don't really know how to make it work

PeterLda said:
Installed them from flashtool drivers setup.
But windows is still not recognizing them, so... I still have to try on another pc but I don't know if it will work.
Also, I was trying to install them manually but I don't really know how to make it work
Click to expand...
Click to collapse
bro insert the battery and wait ten seconds and try to this :
if your pc doesnt recognise your phone try to plug other usb hub
and press vol.down and plug your phone to pc
edit: did you hear that any sounds when your plug your cable to pc ?

rethinkk said:
bro insert the battery and wait ten seconds and try to this :
if your pc doesnt recognise your phone try to plug other usb hub
and press vol.down and plug your phone to pc
edit: did you hear that any sounds when your plug your cable to pc ?
Click to expand...
Click to collapse
Any sounds from the phone? Nope, just the light turned red like always, and showed the charging icon, then turned off (like it does normally) and Windows shows "Unknown USB".
Thanks for the help!

PeterLda said:
Any sounds from the phone? Nope, just the light turned red like always, and showed the charging icon, then turned off (like it does normally) and Windows shows "Unknown USB".
Thanks for the help!
Click to expand...
Click to collapse
No bro from the pc when your phone connect to pc.did you try hold vol.up button and connect to pc, anything was changed?

rethinkk said:
No bro from the pc when your phone connect to pc.did you try hold vol.up button and connect to pc, anything was changed?
Click to expand...
Click to collapse
I just hear the sound windows make when a non-recognized device is connected like a negative sound? xD (don't know how to explain sounds~~~)

PeterLda said:
I just hear the sound windows make when a non-recognized device is connected like a negative sound? xD (don't know how to explain sounds~~~)
Click to expand...
Click to collapse
ı understood bro,never mind did you install twrp or Custom recovery?

rethinkk said:
ı understood bro,never mind did you install twrp or Custom recovery?
Click to expand...
Click to collapse
No, I didn't, just the things that I listed in the original post, my problem now is that windows doesn't recognize the phone... is that normal? do I have to do anything with flashtool or something?
Thanks for the help bro, I do really apreciate it!

PeterLda said:
No, I didn't, just the things that I listed in the original post, my problem now is that windows doesn't recognize the phone... is that normal? do I have to do anything with flashtool or something?
Thanks for the help bro, I do really apreciate it!
Click to expand...
Click to collapse
it is not normal bro,but your device didnt brick too I think.if your bootlader locked,you can try sony update servıce program dude

rethinkk said:
it is not normal bro,but your device didnt brick too I think.if your bootlader locked,you can try sony update servıce program dude
Click to expand...
Click to collapse
With brick I mean that it's stuck at the bootanimation D:, it just loops (the bootanimation, the phone it's not in a bootloop)
So, you mean Sony PC Companion? It doens't recognize my phone :crying: Is there a way to make it work?

PeterLda said:
With brick I mean that it's stuck at the bootanimation D:, it just loops (the bootanimation, the phone it's not in a bootloop)
So, you mean Sony PC Companion? It doens't recognize my phone :crying: Is there a way to make it work?
Click to expand...
Click to collapse
no bro but sony had removed it
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
which windows version do you use ?
EDİT:try this steps http://forum.xda-developers.com/showpost.php?p=43439187&postcount=6

[Q][Solved]Samsung Infuse 4g I997 BootLoader Corrupted, Please HELP!

Hello there friends. I have accidentally corrupted the bootlader of the phone.
I have trying to flash the phone using Odin and in the bootloader I selected AP file. I did not read it carefully.
Now the phone's bootloader is corrupted. It Show this on the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I connect it with PC it detects and COM port detects too. Can I repair the bootloader of this phone. Please help me. I will be very grateful.
Thank you

saaqirajput said:
Hello there friends. I have accidentally corrupted the bootlader of the phone.
I have trying to flash the phone using Odin and in the bootloader I selected AP file. I did not read it carefully.
Now the phone's bootloader is corrupted. It Show this on the screen
When I connect it with PC it detects and COM port detects too. Can I repair the bootloader of this phone. Please help me. I will be very grateful.
Thank you
Click to expand...
Click to collapse
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.

joel.maxuel said:
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
Click to expand...
Click to collapse
Last night it was being detected and Com Port was also showing but now it is not. I haven't done anything to the phone between this time.
When I plug in the cable phone detects but com port does not show up. Please guide me. Thanks for your answer

saaqirajput said:
Last night it was being detected and Com Port was also showing but now it is not. I haven't done anything to the phone between this time.
When I plug in the cable phone detects but com port does not show up. Please guide me. Thanks for your answer
Click to expand...
Click to collapse
Silly question...are you in Download Mode now? Easy way to achieve is to pull and reinsert battery, then hold down both volume buttons while plugging in the USB cable.
If you are there and no COM port connection, then are you using a different USB port (or PC) since last time? It is said that Download Mode does not like USB 3.0.
Hope this helps.

joel.maxuel said:
Silly question...are you in Download Mode now? Easy way to achieve is to pull and reinsert battery, then hold down both volume buttons while plugging in the USB cable.
If you are there and no COM port connection, then are you using a different USB port (or PC) since last time? It is said that Download Mode does not like USB 3.0.
Hope this helps.
Click to expand...
Click to collapse
No sir phone it is not getting in download mode.
Like I said last night it was going into download mode today it is not.
Some hardware is detected but com port is not being detected. No samsung port in device manager.
I think the bootloader is corrupted. As I said I opened the PDA file in bootloader section and then very very stupidly pressed the start button.
It flashed 17 percent and then stopped. I then again even more stupidly (like it is even possible to be this much if an idiot, but evidently I am) disconnected pulled the battery out and tried to get into download mode.
It did screen was messed up showing rainbows but Odin detected the phone.
Then I made this post after the first reply I tried to go into download mode so something is detected but not the com port.
So I think it is safe to say that the bootloader is corrupted. Now is there a way to repair the bootloader without the ort jag?
Thank you very much for your answer and your time.

saaqirajput said:
No sir phone it is not getting in download mode.
Like I said last night it was going into download mode today it is not.
Some hardware is detected but com port is not being detected. No samsung port in device manager.
I think the bootloader is corrupted. As I said I opened the PDA file in bootloader section and then very very stupidly pressed the start button.
It flashed 17 percent and then stopped. I then again even more stupidly (like it is even possible to be this much if an idiot, but evidently I am) disconnected pulled the battery out and tried to get into download mode.
It did screen was messed up showing rainbows but Odin detected the phone.
Then I made this post after the first reply I tried to go into download mode so something is detected but not the com port.
So I think it is safe to say that the bootloader is corrupted. Now is there a way to repair the bootloader without the ort jag?
Thank you very much for your answer and your time.
Click to expand...
Click to collapse
Download mode is supposed to be independent of the bootloader, so if you still cannot get into Download Mode, you should luck out with a jig.

joel.maxuel said:
Download mode is supposed to be independent of the bootloader, so if you still cannot get into Download Mode, you should luck out with a jig.
Click to expand...
Click to collapse
Wait you mean even if I have messed up the bootloader I can still get into download mode. Wow this is great news. Thank you very much.
Can you please tell me if I can create this jig thingie, do you know a guide because I am pretty sure I am never going to find one here in my country.
Thank you very much for your help

I have seen some videos looks pretty simple just put a 300 k ohm resistor between the 4th and 5th leg.
I will try and make the jig and post the result tomorrow.
@joel.maxuel thank you very much for your time.

joel.maxuel said:
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
Click to expand...
Click to collapse
Hello sir, if I am able to get into download mode will flashing the Phone and PDA files from your package be enough or do I need to find the bootloader too from somewhere?

saaqirajput said:
Hello sir, if I am able to get into download mode will flashing the Phone and PDA files from your package be enough or do I need to find the bootloader too from somewhere?
Click to expand...
Click to collapse
The Unbrick package rescues half-trashed bootloaders (among other things) from what I read in other parts of the forum, so you should be fine. You may, however, need to flash a back to root package (my mirror has option C, albeit in an extracted mess) in order to get system working properly again. When I had my Infuse, it was the Rogers version, so I could never use the AT&T packages (so I never knew first-hand the difference between the unbrick and back-to-stock).
Can cross that bridge when you come to it. Hope this helps.

Okay I am having trouble making a jig. I could not find a proper 301 k resistor to I stiched 3 100k resistors. Somehow it is not working. Maybe the USB connector us faulty. It had four connectors on the main side and 1 on the other.
I will change the USB connector and try again.
Thank you very very much

saaqirajput said:
Okay I am having trouble making a jig. I could not find a proper 301 k resistor to I stiched 3 100k resistors. Somehow it is not working. Maybe the USB connector us faulty. It had four connectors on the main side and 1 on the other.
I will change the USB connector and try again.
Thank you very very much
Click to expand...
Click to collapse
Hmmm, that should work... 301K is pretty specific but there are a lot of variance with resistors, and unless the variance is being amplified by daisy-chaining three 100K's, there shouldn't be a problem. If you have a multimeter, you should check the resistance readout to see if it is off by much.
If not, then it comes back to my original theory. Jacked bootloaders can be modified/restored via ODIN or Heimdall, although the problem screen you have (in the end, a really jacked bootloader) isn't the same as what I was going on (which was the wrong, partially functioning bootloader).
I thought the Download/Odin mode was called off at the Modem level (before the bootloader), but I may be wrong. If so (that is, if your jig does not work), you may need a JTAG service after all.
Sorry for any wasted effort.

I could not find a 5 pin USB connector, I tore apart at least 7 USB cables and all of them ONLY had 4 pins.
I think I am going to have to tear apart the original cable of my S3 and I really really don't want to do that.
I will post the final results on Friday evening

Okay I found a 5 pin connector and made a jig but it did not work. Looks like I a going to have to pay for a jtag service.
Thank you again for all your help

Fixed my Phone
All right I have finally fixed it. The problem was I had some newer or I don't know older driver versions installed. I installed i997 Kies mini and installed the driver that came with that software.
And as soon as I connected the phone while pressing Vol Up + Vol Down computer detected it and odin detected it too. Then I installed your provided firmware.
It is okay now. It is working, there is a rainbow effect every time I turn it on but that is okay. Only recovery is not working. I can't go into recovery.
Everything else is working fine. Thank you very much for all your help.

GT-S7582 - Odin stuck at initialization and Kies is not working

Hi guys, I have a GT-S7582/Samsung Galaxy S Duos 2 and it was on a stock firmware unrooted. I accidentally installed some virus apps on it, and voila! It is stuck on a bootloop, and only powers up in download mode. However this was not such a problem as it could be recovered using odin, but as soon as i used odin, i found out that odin was stuck initialization. I've tried installing/reinstalling drivers, changing from pc to pc and used a laptop too, tried different ports, used different cables (and yes, im not using a usb 3.0). I need help! I've been stuck here for days!

meandarm said:
Hi guys, I have a GT-S7582/Samsung Galaxy S Duos 2 and it was on a stock firmware unrooted. I accidentally installed some virus apps on it, and voila! It is stuck on a bootloop, and only powers up in download mode. However this was not such a problem as it could be recovered using odin, but as soon as i used odin, i found out that odin was stuck initialization. I've tried installing/reinstalling drivers, changing from pc to pc and used a laptop too, tried different ports, used different cables (and yes, im not using a usb 3.0). I need help! I've been stuck here for days!
Click to expand...
Click to collapse
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Let me know if it works for you.
---------- Post added at 07:16 PM ---------- Previous post was at 07:16 PM ----------
meandarm said:
Hi guys, I have a GT-S7582/Samsung Galaxy S Duos 2 and it was on a stock firmware unrooted. I accidentally installed some virus apps on it, and voila! It is stuck on a bootloop, and only powers up in download mode. However this was not such a problem as it could be recovered using odin, but as soon as i used odin, i found out that odin was stuck initialization. I've tried installing/reinstalling drivers, changing from pc to pc and used a laptop too, tried different ports, used different cables (and yes, im not using a usb 3.0). I need help! I've been stuck here for days!
Click to expand...
Click to collapse
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Let me know if it works for you.

Owais Siddiqui said:
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Let me know if it works for you.
---------- Post added at 07:16 PM ---------- Previous post was at 07:16 PM ----------
Remove the battery before you go into download mode and put it back in once Odin recognizes your phone.
Let me know if it works for you.
Click to expand...
Click to collapse
Unfortunately no, the phone doesnt turn on if the battery isnt there

meandarm said:
Unfortunately no, the phone doesnt turn on if the battery isnt there
Click to expand...
Click to collapse
Sorry to hear that. Could you try using a different USB cable or PORT? Let the phone be connected in Odin mode and remove the battery. Wait for 2 - 5 minutes and assemble the battery again

Owais Siddiqui said:
Sorry to hear that. Could you try using a different USB cable or PORT? Let the phone be connected in Odin mode and remove the battery. Wait for 2 - 5 minutes and assemble the battery again
Click to expand...
Click to collapse
The phone turns off when I pull the battery out ?

Sorry man! Please try this : Try to flash with Odin3 v1.82(or any older version). Once it gets stuck on "setup connection", close Odin3 v1.82 and open Odin3 v1.83(or latest version) and try flashing again.

meandarm said:
Hi guys, I have a GT-S7582/Samsung Galaxy S Duos 2 and it was on a stock firmware unrooted. I accidentally installed some virus apps on it, and voila! It is stuck on a bootloop, and only powers up in download mode. However this was not such a problem as it could be recovered using odin, but as soon as i used odin, i found out that odin was stuck initialization. I've tried installing/reinstalling drivers, changing from pc to pc and used a laptop too, tried different ports, used different cables (and yes, im not using a usb 3.0). I need help! I've been stuck here for days!
Click to expand...
Click to collapse
1-download odin from here-http://odindownload.com/Samsung-Odin
2-download samsung usb driver from here-http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
5-download twrp from here-http://www.mediafire.com/download/938c3d5o1brp6pz/TWRP+v3.0.0+GT-S7582.tar.md5
4-download stock rom of your region from here-http://www.sammobile.com/firmwares/database/GT-S7582/
.
remember your phone should be charged enough
.
now do it step wise
1-install odin and samsung usb driver on p.c
2-remove (sim card memory card and battery)
3re-insert you'r battery and press volume down home key and power button together this will boot your phone into downloading mode
4-open odin in p.c click pda select twrp md5 file
5-now connect your phone to p.c and wait for odin msg
6-untick auto reboot and click start
7-once odin says reset remove your battery and disconnect the data cable
8-reinsert your battery and press volume up power button together it boot your phone into twrp recovery
9-do a clean flash as shown in this pitchure
- When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again"and swipe the lock bar
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
10-after clean flash remove your battery and reinsert it
11-boot your phone into download mode
12-open odin again click pda select stock rom md5 file click start once odin says pass and remove your data cable
phone reboots its self
once its reboot
done!!!enjoy...:good:
.
.
.

charlesxd2016 said:
1-download odin from here-http://odindownload.com/Samsung-Odin
2-download samsung usb driver from here-http://odindownload.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
5-download twrp from here-http://www.mediafire.com/download/938c3d5o1brp6pz/TWRP+v3.0.0+GT-S7582.tar.md5
4-download stock rom of your region from here-http://www.sammobile.com/firmwares/database/GT-S7582/
.
remember your phone should be charged enough
.
now do it step wise
1-install odin and samsung usb driver on p.c
2-remove (sim card memory card and battery)
3re-insert you'r battery and press volume down home key and power button together this will boot your phone into downloading mode
4-open odin in p.c click pda select twrp md5 file
5-now connect your phone to p.c and wait for odin msg
6-untick auto reboot and click start
7-once odin says reset remove your battery and disconnect the data cable
8-reinsert your battery and press volume up power button together it boot your phone into twrp recovery
9-do a clean flash as shown in this pitchure
- When entering TWRP Recovery, it will ask you if you want to keep system partition Read only, check the box "Never show this screen during boot again"and swipe the lock bar
10-after clean flash remove your battery and reinsert it
11-boot your phone into download mode
12-open odin again click pda select stock rom md5 file click start once odin says pass and remove your data cable
phone reboots its self
once its reboot
done!!!enjoy...:good:
.
.
.
Click to expand...
Click to collapse
Thanks man... ill try it ?

go for it..[emoji106]
Sent from my GT-S7582 using XDA-Developers mobile app

meandarm said:
Hi guys, I have a GT-S7582/Samsung Galaxy S Duos 2 and it was on a stock firmware unrooted. I accidentally installed some virus apps on it, and voila! It is stuck on a bootloop, and only powers up in download mode. However this was not such a problem as it could be recovered using odin, but as soon as i used odin, i found out that odin was stuck initialization. I've tried installing/reinstalling drivers, changing from pc to pc and used a laptop too, tried different ports, used different cables (and yes, im not using a usb 3.0). I need help! I've been stuck here for days!
Click to expand...
Click to collapse
bro, I think it's a hardware fault try replacing the charging jack in your phone maybe that will solve your problem(happened to me)
---------- Post added at 03:56 PM ---------- Previous post was at 03:56 PM ----------
meandarm said:
Hi guys, I have a GT-S7582/Samsung Galaxy S Duos 2 and it was on a stock firmware unrooted. I accidentally installed some virus apps on it, and voila! It is stuck on a bootloop, and only powers up in download mode. However this was not such a problem as it could be recovered using odin, but as soon as i used odin, i found out that odin was stuck initialization. I've tried installing/reinstalling drivers, changing from pc to pc and used a laptop too, tried different ports, used different cables (and yes, im not using a usb 3.0). I need help! I've been stuck here for days!
Click to expand...
Click to collapse
bro, I think it's a hardware fault try replacing the charging jack in your phone maybe that will solve your problem(happened to me)

I dumped the phone... it was a hardware problem..