Hello there friends. I have accidentally corrupted the bootlader of the phone.
I have trying to flash the phone using Odin and in the bootloader I selected AP file. I did not read it carefully.
Now the phone's bootloader is corrupted. It Show this on the screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I connect it with PC it detects and COM port detects too. Can I repair the bootloader of this phone. Please help me. I will be very grateful.
Thank you
saaqirajput said:
Hello there friends. I have accidentally corrupted the bootlader of the phone.
I have trying to flash the phone using Odin and in the bootloader I selected AP file. I did not read it carefully.
Now the phone's bootloader is corrupted. It Show this on the screen
When I connect it with PC it detects and COM port detects too. Can I repair the bootloader of this phone. Please help me. I will be very grateful.
Thank you
Click to expand...
Click to collapse
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
joel.maxuel said:
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
Click to expand...
Click to collapse
Last night it was being detected and Com Port was also showing but now it is not. I haven't done anything to the phone between this time.
When I plug in the cable phone detects but com port does not show up. Please guide me. Thanks for your answer
saaqirajput said:
Last night it was being detected and Com Port was also showing but now it is not. I haven't done anything to the phone between this time.
When I plug in the cable phone detects but com port does not show up. Please guide me. Thanks for your answer
Click to expand...
Click to collapse
Silly question...are you in Download Mode now? Easy way to achieve is to pull and reinsert battery, then hold down both volume buttons while plugging in the USB cable.
If you are there and no COM port connection, then are you using a different USB port (or PC) since last time? It is said that Download Mode does not like USB 3.0.
Hope this helps.
joel.maxuel said:
Silly question...are you in Download Mode now? Easy way to achieve is to pull and reinsert battery, then hold down both volume buttons while plugging in the USB cable.
If you are there and no COM port connection, then are you using a different USB port (or PC) since last time? It is said that Download Mode does not like USB 3.0.
Hope this helps.
Click to expand...
Click to collapse
No sir phone it is not getting in download mode.
Like I said last night it was going into download mode today it is not.
Some hardware is detected but com port is not being detected. No samsung port in device manager.
I think the bootloader is corrupted. As I said I opened the PDA file in bootloader section and then very very stupidly pressed the start button.
It flashed 17 percent and then stopped. I then again even more stupidly (like it is even possible to be this much if an idiot, but evidently I am) disconnected pulled the battery out and tried to get into download mode.
It did screen was messed up showing rainbows but Odin detected the phone.
Then I made this post after the first reply I tried to go into download mode so something is detected but not the com port.
So I think it is safe to say that the bootloader is corrupted. Now is there a way to repair the bootloader without the ort jag?
Thank you very much for your answer and your time.
saaqirajput said:
No sir phone it is not getting in download mode.
Like I said last night it was going into download mode today it is not.
Some hardware is detected but com port is not being detected. No samsung port in device manager.
I think the bootloader is corrupted. As I said I opened the PDA file in bootloader section and then very very stupidly pressed the start button.
It flashed 17 percent and then stopped. I then again even more stupidly (like it is even possible to be this much if an idiot, but evidently I am) disconnected pulled the battery out and tried to get into download mode.
It did screen was messed up showing rainbows but Odin detected the phone.
Then I made this post after the first reply I tried to go into download mode so something is detected but not the com port.
So I think it is safe to say that the bootloader is corrupted. Now is there a way to repair the bootloader without the ort jag?
Thank you very much for your answer and your time.
Click to expand...
Click to collapse
Download mode is supposed to be independent of the bootloader, so if you still cannot get into Download Mode, you should luck out with a jig.
joel.maxuel said:
Download mode is supposed to be independent of the bootloader, so if you still cannot get into Download Mode, you should luck out with a jig.
Click to expand...
Click to collapse
Wait you mean even if I have messed up the bootloader I can still get into download mode. Wow this is great news. Thank you very much.
Can you please tell me if I can create this jig thingie, do you know a guide because I am pretty sure I am never going to find one here in my country.
Thank you very much for your help
I have seen some videos looks pretty simple just put a 300 k ohm resistor between the 4th and 5th leg.
I will try and make the jig and post the result tomorrow.
@joel.maxuel thank you very much for your time.
joel.maxuel said:
If you can still go into download mode, all is not lost
Try the AT&T unbrick using he following mirror page:
http://forum.xda-developers.com/infuse-4g/general/mirror-development-files-t3011627
Hope this helps.
Click to expand...
Click to collapse
Hello sir, if I am able to get into download mode will flashing the Phone and PDA files from your package be enough or do I need to find the bootloader too from somewhere?
saaqirajput said:
Hello sir, if I am able to get into download mode will flashing the Phone and PDA files from your package be enough or do I need to find the bootloader too from somewhere?
Click to expand...
Click to collapse
The Unbrick package rescues half-trashed bootloaders (among other things) from what I read in other parts of the forum, so you should be fine. You may, however, need to flash a back to root package (my mirror has option C, albeit in an extracted mess) in order to get system working properly again. When I had my Infuse, it was the Rogers version, so I could never use the AT&T packages (so I never knew first-hand the difference between the unbrick and back-to-stock).
Can cross that bridge when you come to it. Hope this helps.
Okay I am having trouble making a jig. I could not find a proper 301 k resistor to I stiched 3 100k resistors. Somehow it is not working. Maybe the USB connector us faulty. It had four connectors on the main side and 1 on the other.
I will change the USB connector and try again.
Thank you very very much
saaqirajput said:
Okay I am having trouble making a jig. I could not find a proper 301 k resistor to I stiched 3 100k resistors. Somehow it is not working. Maybe the USB connector us faulty. It had four connectors on the main side and 1 on the other.
I will change the USB connector and try again.
Thank you very very much
Click to expand...
Click to collapse
Hmmm, that should work... 301K is pretty specific but there are a lot of variance with resistors, and unless the variance is being amplified by daisy-chaining three 100K's, there shouldn't be a problem. If you have a multimeter, you should check the resistance readout to see if it is off by much.
If not, then it comes back to my original theory. Jacked bootloaders can be modified/restored via ODIN or Heimdall, although the problem screen you have (in the end, a really jacked bootloader) isn't the same as what I was going on (which was the wrong, partially functioning bootloader).
I thought the Download/Odin mode was called off at the Modem level (before the bootloader), but I may be wrong. If so (that is, if your jig does not work), you may need a JTAG service after all.
Sorry for any wasted effort.
I could not find a 5 pin USB connector, I tore apart at least 7 USB cables and all of them ONLY had 4 pins.
I think I am going to have to tear apart the original cable of my S3 and I really really don't want to do that.
I will post the final results on Friday evening
Okay I found a 5 pin connector and made a jig but it did not work. Looks like I a going to have to pay for a jtag service.
Thank you again for all your help
Fixed my Phone
All right I have finally fixed it. The problem was I had some newer or I don't know older driver versions installed. I installed i997 Kies mini and installed the driver that came with that software.
And as soon as I connected the phone while pressing Vol Up + Vol Down computer detected it and odin detected it too. Then I installed your provided firmware.
It is okay now. It is working, there is a rainbow effect every time I turn it on but that is okay. Only recovery is not working. I can't go into recovery.
Everything else is working fine. Thank you very much for all your help.
Related
SOLVED - you have got to be kidding me though. i had 2 faulty cables, one was my original cable and another a brand new one. so i used one of my friends and it worked fine. I HATE ELECTRONICS
my drivers dont work and my phone is stuck in boot loop and i CANNOT get into recovery
i just need someone that can get me back to stock :[
PM ME if you can help
heres my problem thread
http://forum.xda-developers.com/showthread.php?t=1353314
VIDEO showing boot loop (same thing if i try 3 button recovery)
http://www.youtube.com/watch?v=n3ALNj5q-hY
VIDEO showing download mode + odin , USB NOT RECOGNIZED usb error 43 device has stopped working
http://www.youtube.com/watch?v=D4CnRnecNrQ
i have deleted all drives so someone can help me fresh
rsx19 said:
my drivers dont work and my phone is stuck in boot loop and i CANNOT get into recovery
i just need someone that can get me back to stock :[
Click to expand...
Click to collapse
Restart your computer and then pull the battery out of your phone and put it back in. Now on your computer open Odin and then hold vol+ and vol- and plug in the USB cord this will put you in downlaod mode. And use Odin to get you back to a stock rom
Currently Fusionized
Wdustin1 said:
Restart your computer and then pull the battery out of your phone and put it back in. Now on your computer open Odin and then hold vol+ and vol- and plug in the USB cord this will put you in downlaod mode. And use Odin to get you back to a stock rom
Currently Fusionized
Click to expand...
Click to collapse
ive had this problem for a week now, it doesnt seem to be that simple. installing new drivers doesnt work, using different usb ports dont work, going into download mode doesnt work, thats why i need someone to try it for me cause i just cant figure it out
there has to be somebody!
Have you read this post ?
studacris said:
Have you read this post ?
Click to expand...
Click to collapse
not related to my post. can anyone help me on teamviewer?
bump + op update
not sure what someone would be able to do remotely to help you with a device you hold in your hand......why havent you tried Heimdall method? ODIN sucks.
Pirateghost said:
not sure what someone would be able to do remotely to help you with a device you hold in your hand......why havent you tried Heimdall method? ODIN sucks.
Click to expand...
Click to collapse
doesnt work either cause my phone isnt recognized by the computer at all so ANYTHING usb based doesnt work and i cant get into recovery so that doesnt work either, i mean i have to be doing something wrong right? the phone cant be dead
Heimdall uses it's own driver so Jake you install that and uninstall all the others, SO that may help with the recognition issue, as the stock closed source driver can be a douche sometimes...like in your case.
studacris said:
Heimdall uses it's own driver so Jake you install that and uninstall all the others, SO that may help with the recognition issue, as the stock closed source driver can be a douche sometimes...like in your case.
Click to expand...
Click to collapse
there is nothing in the drop down menus
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
bump, would be great if someone could help me tomorrow night so i can use my phone in a presentation
rsx19 said:
bump, would be great if someone could help me tomorrow night so i can use my phone in a presentation
Click to expand...
Click to collapse
I've seen that error code 43 on my machine when there's a larger USB issue. Usually two things will correct that - a reboot and switching USB ports.
I would also suggest (if you haven't already) uninstalling all of the drivers you have installed - Samsung- or Heimdall-related, then reboot, then do the Heimdall again.
jmtheiss said:
I've seen that error code 43 on my machine when there's a larger USB issue. Usually two things will correct that - a reboot and switching USB ports.
I would also suggest (if you haven't already) uninstalling all of the drivers you have installed - Samsung- or Heimdall-related, then reboot, then do the Heimdall again.
Click to expand...
Click to collapse
ive tried reinstating and tried all 4 of my laptop ports and all 12 or 14 of my desktop ports. ive tried installing all the different drivers users gave me but that never helped. and as you can eee i cant even install the heimdall drivers
either both my desktop and laptop have something wrong with them or its a user error, thats why i want someone else to help me through team viewer, this thread is moving to slow for me to get anything done
I'll ask the obvious question, just to make sure - Have you tried a different cable?
jmtheiss said:
I'll ask the obvious question, just to make sure - Have you tried a different cable?
Click to expand...
Click to collapse
yup yup that i have done
Ok, I took a quick look at the videos in the OP. Two things I noticed:
- You have the phone plugged in prior to putting it into download mode. It's possible you're just keeping the plug in after putting it there (couldn't see in the video). Try putting the phone in download mode, unhook the cable, then rebooting the computer (leave the phone in DL mode), then hook it up again.
- I saw that you have an ICS build. Do any button combinations get you to recovery (V+/V-/Power, V+/Power)? If so, you might be able to flash another rom.
- You may also want to look for AdamOutler's One-click Unbrick. That might be of some use in your situation.
jmtheiss said:
Ok, I took a quick look at the videos in the OP. Two things I noticed:
- You have the phone plugged in prior to putting it into download mode. It's possible you're just keeping the plug in after putting it there (couldn't see in the video). Try putting the phone in download mode, unhook the cable, then rebooting the computer (leave the phone in DL mode), then hook it up again.
- I saw that you have an ICS build. Do any button combinations get you to recovery (V+/V-/Power, V+/Power)? If so, you might be able to flash another rom.
- You may also want to look for AdamOutler's One-click Unbrick. That might be of some use in your situation.
Click to expand...
Click to collapse
at school writing 2 papers so ill have to try these when i get home
i put the phone in download mode with vol + - while plugging in the cord but ill try the others
no none get me into recovery,
could you link me that one?
rsx19 said:
at school writing 2 papers so ill have to try these when i get home
i put the phone in download mode with vol + - while plugging in the cord but ill try the others
no none get me into recovery,
could you link me that one?
Click to expand...
Click to collapse
Ok, I looked a little more at the one click unbrick, and since you can get to download mode, it doesn't look like the right solution. So.. nevermind that one.
As far as removing the drivers, it's something of a two-step process.
Step one is to plug the phone in, let Windows see it (even if incorrectly), and then go to device manager. From there, find the phone, and uninstall it/remove drivers. Then unplug the phone.
Step two is to go to "Programs and Features" and remove any android/samsung drivers that show up there.
Once you've done that, check to make sure any folders that drivers would have been unpacked into (mine is in C:\usb_driver) has all the Samsung or Heimdall drivers removed (BE CAREFUL WHILE DOING THIS - ONLY REMOVE SAMSUNG/HEIMDALL DRIVERS IF YOU'RE 100% CERTAIN).
Then, reboot the computer, re-run Heimdall to get zadig.exe to do its thing, then connect the phone.
Also, have you considered dual-booting (or using a USB live drive) of Ubuntu? Heimdall seems to be a little happier in Linux, but you'll just need to make sure that Java installs with it.
There's also a really slim chance that if you hook the phone up in download mode, ADB might detect it enough to where you can give the "adb reboot recovery" command.
jmtheiss said:
Ok, I looked a little more at the one click unbrick, and since you can get to download mode, it doesn't look like the right solution. So.. nevermind that one.
As far as removing the drivers, it's something of a two-step process.
Step one is to plug the phone in, let Windows see it (even if incorrectly), and then go to device manager. From there, find the phone, and uninstall it/remove drivers. Then unplug the phone.
Step two is to go to "Programs and Features" and remove any android/samsung drivers that show up there.
Once you've done that, check to make sure any folders that drivers would have been unpacked into (mine is in C:\usb_driver) has all the Samsung or Heimdall drivers removed (BE CAREFUL WHILE DOING THIS - ONLY REMOVE SAMSUNG/HEIMDALL DRIVERS IF YOU'RE 100% CERTAIN).
Then, reboot the computer, re-run Heimdall to get zadig.exe to do its thing, then connect the phone.
Also, have you considered dual-booting (or using a USB live drive) of Ubuntu? Heimdall seems to be a little happier in Linux, but you'll just need to make sure that Java installs with it.
There's also a really slim chance that if you hook the phone up in download mode, ADB might detect it enough to where you can give the "adb reboot recovery" command.
Click to expand...
Click to collapse
ill also try ubuntu since i do have it on a usb drive. my paper isnt getting written well..ll sigh
Hello after a flash try with odin the galaxy 3 won't turn on anymore. Can't get in download mode and the phone when i put it with usb cable on pc get not recognized on pc with data cable nothing happens in windows hardware manager the phone not show up is this a full brick? How can i revive it? I tried the 3 button method nothing tried the battery method nothing. Please help of out thanks.
Sent from my GT-I9100 using Tapatalk
Looks like u have a brick. Have u tried this: homekey+menu+ volume up+ powerbutton? There should be forced upload by keys... if that comes u still have chance.
Sent from my GT-I5800 using xda premium
No chance the phone dont turn on and the pc not recognize it. i installed the usb drivers and kies and odin both not recognize it and it is not shown in the hardware monitor in windows it is completely death what should i do try with usb jig or something else or should i bring it to a samsung service center?
Bricked???
Ok in first place i want to know how did u brick your phone.Dont u know that bootloader must be removed before flashing.Did u remove it?
If yes then whats the other reason for bricking the phone
I rooted my phone before i flashed new rom... perhaps it's that bootloader what bricked your phone.
Sent from my GT-I5800 using xda premium
did u get any error logo stating that ur phone is bricked
repairing android logo will appear
i dont think android can get bricked so easily…hav u checked ur battery?
there is one thing called "coal digger"(i dont know how u guys call it)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
… it can force the phone to enter the download mode
if this cant help u…ure really unlucky
Sent from my GT-I5800 using XDA App
It is not my phone it is a phone from a friend all i know is that he made a firmware update with odin but at beginning of flash the phone went out and since that happens it not turns on not in download mode not normal and on pc it not gets recognized so i can´t flash or anything else because the phone on usb cable not response and not shown in the system.
There is a software called "One Click Unbrick" (or sth). It worked for me once. Hope it helps you
did you try the keys from posting #2?
additional try worth
with battery pulled out
press and hold the keys
insert the battery while the kesy are hold
-> you may need a second person for that action
cheers
qaysed
The problem is i can´t connect the phone to pc to do anything like odin or unbrick or else. The phone is Dead completly no response on pc i connect phone to pc nothing happens like i not connected it hope you understand what i mean i ordered a usb jig for samsung galaxy hope that is working on the galaxy 3 i only need to get to download mode rest is easy but that is the major problem the phone is complete dead. hope you understand now the situation???
neophyte1983 said:
The problem is i can´t connect the phone to pc to do anything like odin or unbrick or else. The phone is Dead completly no response on pc i connect phone to pc nothing happens like i not connected it hope you understand what i mean i ordered a usb jig for samsung galaxy hope that is working on the galaxy 3 i only need to get to download mode rest is easy but that is the major problem the phone is complete dead. hope you understand now the situation???
Click to expand...
Click to collapse
well...did u try to connect it to charger and leave it pluged in for an hour....?and see what happens then...if anything will.....or replace battery maybe is dead....
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
no it is not the battery, the phone not goes on and not gets recognized on pc. I hope the usb jig will make it to go in download mode i get on tomorrow if this not help it must go to a service center for repair.
any ideas also with usb jig i ordered it is dead no response no download mode no charging no pc detection nothing.
neophyte1983 said:
any ideas also with usb jig i ordered it is dead no response no download mode no charging no pc detection nothing.
Click to expand...
Click to collapse
Start from the beginning. Tell us all the flashing steps you did in detail, we can figure out if its a soft or hardbrick.
Cheers
Sent from my GT-i9003 powered by MIUI
bscraze said:
Start from the beginning. Tell us all the flashing steps you did in detail, we can figure out if its a soft or hardbrick.
Cheers
Sent from my GT-i9003 powered by MIUI
Click to expand...
Click to collapse
Okay it is the phone from a friend he would update the firmware downloaded all stuff connected the g3 to the pc in download mode, and then pressed start in odin directly @ the beginning the g3 went out and since that it not turns on and not goes download mode and not gets recognized on the pc. So no chance to get it in odin detected battery loading also not doing.
That is all i know about it since he tried to flash it with odin the phone doesnt do anything anymore.
how did the phone go out? no battery?
neophyte1983 said:
Okay it is the phone from a friend he would update the firmware downloaded all stuff connected the g3 to the pc in download mode, and then pressed start in odin directly @ the beginning the g3 went out and since that it not turns on and not goes download mode and not gets recognized on the pc. So no chance to get it in odin detected battery loading also not doing.
That is all i know about it since he tried to flash it with odin the phone doesnt do anything anymore.
Click to expand...
Click to collapse
Did he flash bootloader? If he did, its a confirmed hardbrick. If he didn't, I think you need to check with the service centre. Maybe the phone has something wrong with its hardware.
Cheers
Sent from my GT-i9003 powered by MIUI
Okay i asked him again he hold me the following. He had connected the G3 to the PC and wanted to start flashing but directly after he connect it to PC the phone was off since that it is dead he had not pressed start in odin and nothing. Just connected it to PC and seconds later the phone was completly Dead. No Bootloader flashing nothing. The phone doesn´t charge doesn´t gets detected by pc on usb cable doesn´t go to download mode. I have a usb jig for S and S2 but with that jig the G3 also not goes to download mode. so he not started flashing in Odin just had the G3 on the usb cable on PC and seconds later it was dead completly.
neophyte1983 said:
Okay i asked him again he hold me the following. He had connected the G3 to the PC and wanted to start flashing but directly after he connect it to PC the phone was off since that it is dead he had not pressed start in odin and nothing. Just connected it to PC and seconds later the phone was completly Dead. No Bootloader flashing nothing. The phone doesn´t charge doesn´t gets detected by pc on usb cable doesn´t go to download mode. I have a usb jig for S and S2 but with that jig the G3 also not goes to download mode. so he not started flashing in Odin just had the G3 on the usb cable on PC and seconds later it was dead completly.
Click to expand...
Click to collapse
best opt. is to send phone to samsung service then...it might be hardware related stuff....
~~~~~~~~~~~~~~~~~~~~~~~~~
Sent from Galaxy
Kyrillos' ROM v10 GWK74 beta
powered by
CM7-kernel 1.3 H.V.
~~~~~~~~~~~~~~~~~~~~~~~~~
SOLVED
Well I hope my Nexus S didn't brick. Well I will start off with what happened. I've been running ICS Slim for a while and I noticed it started to become very buggy. Been busy for a few days so I havnt had time to fix anything. Well today I had some free time so I was going to just connect my SNS to my pc to transfer important files and pictures. My PC (Windows 7) kept giving me "USB Device not recognised" errors. I have correctly installed the adb drivers and have connected my SNS to the same computer. I also tried another connection usb cable to see if my original was defective but no avail. I also tried my netbook with both usb cords becuase I also had this SNS connected to the netbook before (Win7 Also) with correct adb drivers.... still nothing. I then go to rom manager download codename android and successfully install the rom. Tried everything again and still no connection. After shutting down the SNS and strating it again multiple times and trying multiple things my SNS went into "safe mode". Curious I thought there must be something wrong with some system files that don't get written over when a new rom is installed with a factory reset. I decided to turn off my SNS and turn it on one more time and I get this screen which ive never seen before.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It also says between Downloading.... and Do not turn off target!!!!:
USB Control Init
USB Control Init end
Please help because I need this phone for work and I cannot afford a new one... Just really hope it didnt bite the dust.
Samsung Nexus S i9020a Koodo
FIX:
had the same problem. DEFINITELY FIXED NOW.
Whenever, I connected my Nexus S to any OS a USB Storage Mode dialogue used to pop up and once I clicked Turn On, the PC would find the mass storage. About a week ago, this functionality has stopped completely. I plug the USB cable and nothing happens but the phone starts charging.
I have read many posts about this. I have tried the removing the battery, Rebooting, Trying the boot loader screen, erasing the USB storage, resetting to factory settings, Erasing and dismounting the SD Card from the Boot loader, cleaning the USB Port, trying different USB cables (nokia, parrot, original Nexus etc)....
What has worked for me was the NEEDLE trick. Get a needle and bend the USB hub beneath the phone towards to the top. (What I realized is that it was pushed all the way to the bottom, lifting it up about 1 mm has centered it). I plug the USB and pops up the USB storage mode interface.
So, it turns out a hardware issue, probably a doggy USB port on the NEXUS easily gets disturbed. Using different cables usually helps the problem, especially cheap cables tend to damage the port easier.
So, I would recommend every one to use proper USB cables; the original nexus cable, a nokia cable or decent quality cable. (Do not use the ones from cheap car chargers etc).
Secondly, do not reset your phone for nothing.
Thirdly, keep your phone clean.
I hope this information helps someone. Thanks.
Click to expand...
Click to collapse
source: http://www.google.com/support/forum/p/Google Mobile/thread?tid=4dedeb14b7ccb58e&hl=en
Update: Decided to turn off the Nexus S..... Stupid idea I guess because It wont turn on any more.... Plugging into a computer still says "USB Device not recognised" though so I have no clue...
Would really love some help please
Can you get into recovery? Or Hboot?
rocket999 said:
Can you get into recovery? Or Hboot?
Click to expand...
Click to collapse
No recover. Whats Hboot? No fastboot screen... So I thinks its dead.
Trying unbrickable resurrector but cannot find device
Desperate need of help please
do you have CWM installed on your nexus??
use mount/storage then connect it to Computer
galaxy tab p1000
this screen shot is the same of download mode in the galaxy tab p 1000, in this mode, with program "ODIN" you can put in your device the rom, kernel and radio! ww w.team overcome.net/p1000/?page_id=17 this is a guide for flash the p1000, i don't know if that function for NS ! I'm sorry.
[Q][Help]USB Problems
I just removed my simcard and reinserted it again and my phone started normally.... weird...
But still at problem #1. Cannot mount usb. Windows 7 Still says "USB device not Recognised". My guess is that the usb port is broken. Its quite common apparently so i'm gunna see if Koodo will fix it.
Before I send it in should I go to a stock rom, stock baseband, and lock bootloader. or can I send it in with CyanogenMod 9?
Tw1tchy said:
I just removed my simcard and reinserted it again and my phone started normally.... weird...
But still at problem #1. Cannot mount usb. Windows 7 Still says "USB device not Recognised". My guess is that the usb port is broken. Its quite common apparently so i'm gunna see if Koodo will fix it.
Before I send it in should I go to a stock rom, stock baseband, and lock bootloader. or can I send it in with CyanogenMod 9?
Click to expand...
Click to collapse
go back to stock and lock bootloader so they wont void your warranty
sean1984 said:
go back to stock and lock bootloader so they wont void your warranty
Click to expand...
Click to collapse
Thx but I fixed my USB port myself ! But if I ever have problems again I will remember what you said.
Posted my fix on the OP
nexus s usb not recognized
sir, plz help me i have a nexus s i9023 i have tired everything like format system boot sd card cache everything so i think that my nexus s should recognized windows after thes. but now nothing effect and i can acces anythink just fastboot or clockwork mod recovery i have also noticed that when i pluged usb cable on nexus s with computer it stays on charging but after on fastboot my laptop not recognized my nexus s but the charging option is enable so i can ensure that there is no hardware problem i have charged nexus s through data cable but not recognized on coclworkmod i have also try to unmout sd card or usbstorage but nothing effect plz help me
Thanks for the thread.
" Needle trick " worked perfect. [ lifting the usb charging pin - with a needle - on the phone so its center. ]
I've been running the crDroid OOS 10 OB3 ROM since I got my phone two weeks ago and everything was fine and I updated to OB4 today. Well, after I tried changing system ui themeing my phone stopped displaying any system ui at all so I tried to restore my nandroid backup. My nandroid backup took 4 hours then when it got to bluetooth my battery was dying so I had to stop it.
I rebooted into TWRP and tried to clean flash the rom but it gave me errors about mounting the data partition so I tried changing slots.
Well after I changed slots I am stuck in fastboot mode and can't get back to TWRP and adb wont recognize my phone. There's no bootloader or baseband version displayed on fastboot and the product name/variant is msmnile/SDM UFS, my phone is still unlocked if it matters. Someone in the ROM telegram suggested I try the MSM tool but my phone doesn't seem to want to boot into Qualcomm mode and I'm worried that might be a big issue.
Hi!
I really don't know if this helps because you might have already tried it, but I had a similar problem where the normal fastboot mode didnt work and I had no Recovery. Someone suggested, that I should hold Volume Up, Volume down and the Power button all at the same time and from there I was able to revive the phone with the All-In-One Tool...
I quickly looked up the Qualcomm Mode and MSM-Tool you mentioned but I'm still not sure if that is what I just described, so Im posting this just to make sure you tried it because it was a really easy fix when I thought I bricked my phone
Sorry if you already did it, anyway Good Luck!
David
DvdStrbl said:
Hi!
I really don't know if this helps because you might have already tried it, but I had a similar problem where the normal fastboot mode didnt work and I had no Recovery. Someone suggested, that I should hold Volume Up, Volume down and the Power button all at the same time and from there I was able to revive the phone with the All-In-One Tool...
I quickly looked up the Qualcomm Mode and MSM-Tool you mentioned but I'm still not sure if that is what I just described, so Im posting this just to make sure you tried it because it was a really easy fix when I thought I bricked my phone
Sorry if you already did it, anyway Good Luck!
David
Click to expand...
Click to collapse
Well see the issue is I'm trying to get All in One to recognize my phone but it won't seem to boot into EDL mode. I installed the Qualcomm USB drivers but it's still not showing my phone. When I use the key combo suggested to boot into EDL mode my phone does refresh in device manager giving me the qualcomm device so I assume this is download mode just not displaying the text anymore. If i try the key combo with my phone unplugged it takes awhile but eventually goes into fastboot.
In this case I can't help you, i googled EDL, it is what I meant and it was all I got :-/
Wish you good luck
If your bootloader is unlocked try to flash the fastboot rom from fastboot.
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Bradl79 said:
If your bootloader is unlocked try to flash the fastboot rom from fastboot.
https://forum.xda-developers.com/oneplus-7-pro/how-to/rom-stock-fastboot-roms-oneplus-7-pro-t3931424
Click to expand...
Click to collapse
When I try flashing anything at fastboot it just hangs waiting
viralhysteria said:
I've been running the crDroid OOS 10 OB3 ROM since I got my phone two weeks ago and everything was fine and I updated to OB4 today. Well, after I tried changing system ui themeing my phone stopped displaying any system ui at all so I tried to restore my nandroid backup. My nandroid backup took 4 hours then when it got to bluetooth my battery was dying so I had to stop it.
I rebooted into TWRP and tried to clean flash the rom but it gave me errors about mounting the data partition so I tried changing slots.
Well after I changed slots I am stuck in fastboot mode and can't get back to TWRP and adb wont recognize my phone. There's no bootloader or baseband version displayed on fastboot and the product name/variant is msmnile/SDM UFS, my phone is still unlocked if it matters. Someone in the ROM telegram suggested I try the MSM tool but my phone doesn't seem to want to boot into Qualcomm mode and I'm worried that might be a big issue.
Click to expand...
Click to collapse
what the problem u are facing while flashing from msm tools?
If you haven't fixed your phone yet just use MSMtool it will fix it, this phones essentially unbrickable.
whoamanwtf said:
If you haven't fixed your phone yet just use MSMtool it will fix it, this phones essentially unbrickable.
Click to expand...
Click to collapse
I installed the qualcomm drivers and it showed up in MSM tool and gave me success after 6 seconds but nothing else happened so I unplugged my phone now it says device descriptor failed when I try to go into qualcomm mode
If i uninstall the drivers and try again same thing and trying to use the qualcomm driver files tells me my driver is already up to date
Well you need to hit start once it's connected. https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691 follow the instructions there with the phone being unplugged and powered off open msm hold volumes while not hitting power at all and wait then plug into the computer.
viralhysteria said:
I installed the qualcomm drivers and it showed up in MSM tool and gave me success after 6 seconds but nothing else happened so I unplugged my phone now it says device descriptor failed when I try to go into qualcomm mode
If i uninstall the drivers and try again same thing and trying to use the qualcomm driver files tells me my driver is already up to date
Click to expand...
Click to collapse
During Installing drivers again choose the option (something of) search from internet. And let the file be downloaded and install. Trust me this method works. I too had same problem
whoamanwtf said:
Well you need to hit start once it's connected. https://forum.xda-developers.com/oneplus-7-pro/how-to/msm-tool-guac-t3934691 follow the instructions there with the phone being unplugged and powered off open msm hold volumes while not hitting power at all and wait then plug into the computer.
Click to expand...
Click to collapse
Okay I got the descriptor issue to stop and MSM is detecting the phone again but its still not booting to anything when I run the tool like the guide said it should. I do upgrade mode right?
viralhysteria said:
I installed the qualcomm drivers and it showed up in MSM tool and gave me success after 6 seconds but nothing else happened so I unplugged my phone now it says device descriptor failed when I try to go into qualcomm mode
If i uninstall the drivers and try again same thing and trying to use the qualcomm driver files tells me my driver is already up to date
Click to expand...
Click to collapse
viralhysteria said:
Okay I got the descriptor issue to stop and MSM is detecting the phone again but its still not booting to anything when I run the tool like the guide said it should. I do upgrade mode right?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-7-pro/how-to/op7pro-collection-unbrick-tools-t3956595
I meant to send that one, follow those instructions and you'll be good. It's Android 9 but that doesn't matter, you can update from there once your phones working again.
whoamanwtf said:
https://forum.xda-developers.com/oneplus-7-pro/how-to/op7pro-collection-unbrick-tools-t3956595
I meant to send that one, follow those instructions and you'll be good.
Click to expand...
Click to collapse
It says to wait about 5 minutes after starting but I get stuck at this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Where did you get the files you're using? Maybe download one from my link, they're the only ones I've personally used and can say for sure they work
whoamanwtf said:
Where did you get the files you're using? Maybe download one from my link, they're the only ones I've personally used and can say for sure they work
Click to expand...
Click to collapse
Your file does the same thing
The connection status switches to N/A but if i stop it and enum it still detects the phone
I used the drivers provided in your link and it still doesnt seem to work
that status bar at the bottom says Running: Upgrade though but thats just an indicator of the job task, no?
viralhysteria said:
Your file does the same thing
The connection status switches to N/A but if i stop it and enum it still detects the phone
I used the drivers provided in your link and it still doesnt seem to work
that status bar at the bottom says Running: Upgrade though but thats just an indicator of the job task, no?
Click to expand...
Click to collapse
Send a larger screen grab of the MSMtool running, I don't recognize what you sent.
whoamanwtf said:
Send a larger screen grab of the MSMtool running, I don't recognize what you sent.
Click to expand...
Click to collapse
So it sounds dumb but try rebooting your computer and switching USB ports then trying again.
whoamanwtf said:
So it sounds dumb but try rebooting your computer and switching USB ports then trying again.
Click to expand...
Click to collapse
Same thing it just assigned a new COM port
I was try to, unlock my phone from t-mobile (https://forum.xda-developers.com/t/convert-t-mobile-oneplus-9-to-global-or-other-firmware.4277169/), everything was fine.
i unlock my bootloader and SIM, but when i use the "flash_all.bat" and that finish, i have to Reboot into recovery and wipe everything, but the phone don't turn on.
This never happened to me, so i don't know what to do.
Nothing appears, any logo or battery icon.
when i conect the phone to the pc i heard the sound but seconds later is disconected
OnePlus 9 11.2.22.2 (T-Mobile) MSM Download Tool
Oxygen OS 11.2.22.2.LE54CB (T-Mobile) Download: https://drive.google.com/file/d/1-5RC9f8es6ZrwpYKKQBMmw5gW-rzDSfZ/view?usp=sharing Size: 2.92 GB MD5: b6fc004c81d311109f66cceb3f375862
forum.xda-developers.com
Run the tool as other and click start before hooking up the phone while holding both volume buttons.
AtoZ0to9 said:
OnePlus 9 11.2.22.2 (T-Mobile) MSM Download Tool
Oxygen OS 11.2.22.2.LE54CB (T-Mobile) Download: https://drive.google.com/file/d/1-5RC9f8es6ZrwpYKKQBMmw5gW-rzDSfZ/view?usp=sharing Size: 2.92 GB MD5: b6fc004c81d311109f66cceb3f375862
forum.xda-developers.com
Run the tool as other and click start before hooking up the phone while holding both volume buttons.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Idk if im doing something wrong but nothing happens
Ok, so if the MSM tool never shows any indication that it has seen the phone in EDL mode, doesn't start the flashing, etc, but you hear the computer noise when you plug it in, you should investigate your drivers.
Open up the Device Manager and then plug the phone up in EDL mode. EDL mode is achieved by holding both volume buttons while plugging in the phone. Look in the device manager and see what comes up. Somewhere around here are the correct drivers. Look at all of the unbrick / msm threads and one of them will have a driver download for you.
It sounds like a brick, and you are only getting into EDL mode, the mode used to flash back to stock with the MSM tool. So. Drivers. Check them out, and get that sorted and I believe you will be able to revive it.
AtoZ0to9 said:
Ok, so if the MSM tool never shows any indication that it has seen the phone in EDL mode, doesn't start the flashing, etc, but you hear the computer noise when you plug it in, you should investigate your drivers.
Open up the Device Manager and then plug the phone up in EDL mode. EDL mode is achieved by holding both volume buttons while plugging in the phone. Look in the device manager and see what comes up. Somewhere around here are the correct drivers. Look at all of the unbrick / msm threads and one of them will have a driver download for you.
It sounds like a brick, and you are only getting into EDL mode, the mode used to flash back to stock with the MSM tool. So. Drivers. Check them out, and get that sorted and I believe you will be able to revive it.
Click to expand...
Click to collapse
My computer detects my iphone, but when i connect the oneplus phone in my order pc is detectect like this
Delete that driver (check the box to permanently delete) and install this one:
QDLoader HS-USB Driver_64bit_Setup.zip
drive.google.com
Try the process again.
Loshim said:
View attachment 5655997
My computer detects my iphone, but when i connect the oneplus phone in my order pc is detectect like this
Click to expand...
Click to collapse
The TMobile msm might work but most likely won't if it doesn't use the OnePlus 9 pro msm and you need to install the driver that @AtoZ0to9 has mentioned
AtoZ0to9 said:
Delete that driver (check the box to permanently delete) and install this one:
QDLoader HS-USB Driver_64bit_Setup.zip
drive.google.com
Try the process again.
Click to expand...
Click to collapse
i did, i unnistall everything and install again, is the same, i connect my moms phone and is detecting my iphone to, idk what to do
Loshim said:
i did, i unnistall everything and install again, is the same, i connect my moms phone and is detecting my iphone to, idk what to do
Click to expand...
Click to collapse
Does it connect to the msm now also calm down same thing was happening to my phone and it's working fine now you'll be fine
I remember that I did something with the drivers in the process, since the abd bootloader was not detecting it for me, I really do not know if it influences.
this is the driver "android_winusb.inf"
Loshim said:
I remember that I did something with the drivers in the process, since the abd bootloader was not detecting it for me, I really do not know if it influences.
this is the driver "android_winusb.inf"
Click to expand...
Click to collapse
Did you install the driver that @AtoZ0to9 linked
stez827 said:
Does it connect to the msm now also calm down same thing was happening to my phone and it's working fine now you'll be fine
Click to expand...
Click to collapse
When you connected it did you just connect it and try or did you put in edl mode
stez827 said:
Did you install the driver that @AtoZ0to9 linked
Click to expand...
Click to collapse
yes i did
stez827 said:
When you connected it did you just connect it and try or did you put in edl mode
Click to expand...
Click to collapse
i put with edl mode
Ok well you need to download the OnePlus 9 pro msm tool
I still feel like this is possibly an issue with drivers / USB ports etc. Don't worry about other peoples phones, theirs is working. You are working on one thing and one thing only. The connection between YOUR phone and the computer. Have the device manager open ALL the time. Hook up the phone and whatever pops up, click it, hit the delete button on the keyboard, check the box to delete the driver. Download the drivers I linked, and unzip them and run the file. Hook up the phone again to a different USB port. See what comes up. It will most likely be the correct driver, if you followed the steps correctly. Run the MSM tool again and click the start button. If it drops the connection before you hit start, unhook it, hit start again, and hook it back up in EDL to a different USB port. Just gotta keep playing with it man. Mines weird too. I have to use one port for fastboot stuff, and one port for EDL stuff, and sometimes they aren't the same port it was previously. These are temperamental phones. Stay strong, be focused, use your training, we believe in you.
stez827 said:
Ok well you need to download the OnePlus 9 pro msm tool
Click to expand...
Click to collapse
Also 100% download this. Be prepared for everything.
AtoZ0to9 said:
I still feel like this is possibly an issue with drivers / USB ports etc. Don't worry about other peoples phones, theirs is working. You are working on one thing and one thing only. The connection between YOUR phone and the computer. Have the device manager open ALL the time. Hook up the phone and whatever pops up, click it, hit the delete button on the keyboard, check the box to delete the driver. Download the drivers I linked, and unzip them and run the file. Hook up the phone again to a different USB port. See what comes up. It will most likely be the correct driver, if you followed the steps correctly. Run the MSM tool again and click the start button. If it drops the connection before you hit start, unhook it, hit start again, and hook it back up in EDL to a different USB port. Just gotta keep playing with it man. Mines weird too. I have to use one port for fastboot stuff, and one port for EDL stuff, and sometimes they aren't the same port it was previously. These are temperamental phones. Stay strong, be focused, use your training, we believe in you.
Click to expand...
Click to collapse
Dude the TMobile msm is absolute dog**** and when I bricked my phone using the same guide he did I had to use the India OnePlus 9 pro msm tool as it was the only msm that worked so no it's not a problem with USB ports or drivers I had literally the same exact error and I ****ed my phone the same exact way so while there may be a extremely small chance that this fixes it it's still extremely unlikely that it will fix it
AtoZ0to9 said:
I still feel like this is possibly an issue with drivers / USB ports etc. Don't worry about other peoples phones, theirs is working. You are working on one thing and one thing only. The connection between YOUR phone and the computer. Have the device manager open ALL the time. Hook up the phone and whatever pops up, click it, hit the delete button on the keyboard, check the box to delete the driver. Download the drivers I linked, and unzip them and run the file. Hook up the phone again to a different USB port. See what comes up. It will most likely be the correct driver, if you followed the steps correctly. Run the MSM tool again and click the start button. If it drops the connection before you hit start, unhook it, hit start again, and hook it back up in EDL to a different USB port. Just gotta keep playing with it man. Mines weird too. I have to use one port for fastboot stuff, and one port for EDL stuff, and sometimes they aren't the same port it was previously. These are temperamental phones. Stay strong, be focused, use your training, we believe in you.
Click to expand...
Click to collapse
so, i connect the phone with edl and without edl, but in the devices manager nothings happens nothings appears, i heard the sound but i dont see nothing
you guys recommend me using another computer?
stez827 said:
Dude the TMobile msm is absolute dog**** and when I bricked my phone using the same guide he did I had to use the India OnePlus 9 pro msm tool as it was the only msm that worked so no it's not a problem with USB ports or drivers I had literally the same exact error and I ****ed my phone the same exact way so while there may be a extremely small chance that this fixes it it's still extremely unlikely that it will fix it
Click to expand...
Click to collapse
Kinda makes sense since the service is too. Thanks for the clarification, that the conversion guide does weird **** sometimes that makes the regular MSM not work?
I'm lucky to have the NA model which isn't as much dog ****, or just a smaller dog anyways. Seems the carrier variants suck more.