problem booting MCCM DS V4.0 - General Questions and Answers

problem booting MCCM DS V4.0 - General Questions and Answers

help me..when i try to install sd rom (MCCM DS V4.0).when i perform the following steps after extracting the rom
Boot with MAGDLR:
1- copy folder (Android) to SD Card .
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "ANDROID" folder or the folder where you dropped the rom.
7- Now select "BOOT AD SD" and wait boot .....
i receive load zImage and SD kernel open failed message in red. what do i have to do..am i missing something like latest kernel..? plz help me.. the folder does contain a file zImage

Related

Cannot install another ROM after installing 4.01.16 ENG

I have installed ROM ver 4.01.16 in to my MDA1 and now I'm not able to install any other. It is not possible to establish connection fo ROM installing. ActiveSync connection is OK.
Can anyone help me?

use xdatools to flash your device using the SD card method

Also doesnt work. Writes: "Unable to open WinCE file. Could not connect to itsutils.dll.

Ok here you go, its a little outdated but its what I still use:
Qman's how to use XDArit to write nk.nb1 or nk.nbf to your SD card aka the Bootloader Method!
1. Place XDArit and the nk.nb1 or nk.nbf file in the same folder and start XDArit.
2. Select your SD card (disk drive) from the drop down menu.
3. Select Write to SD
Notice that the Windows CE box is already checked so just click the browse button at the end of that window.
4. Select your (nk.nb1 or nk.nbf) image and then Open
Notice by default XDArit will open looking for a *.nb1 file but if you're going to use a .nbf file you'll have to manually change the "Files of Type" to *.nbf
Notice that nk.nbo / nk.nbo was automatically added as your boot-loader and its check box is unchecked so leave it that way and click OK. XDArit should start writing to the card.
When XDArit has finished writing the image put the SD-card into the XDA and hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
Press action to download and it will start the download/restore from the SD card.
Follow the on screen instructions once its "Completed" which will consist of a "Soft Boot/Reset".
Click to expand...
Click to collapse
is this what you are doing ?

noohwaleed

I have a Samsung Vibrant and this is exactly what happened. Please help me turn my phone back on.
Android System Recovery <3e> after using Odin3 v1.00
All:
I used Odin3 v100 to load Android 2.2 ROM
I followed the following steps
i9000XXJP2 Instructions
1. Remove the battery from your phone
2. Remove the SIM Card and MicroSD Card from your phone
3. Place the battery back on the phone
4. Hold down the HOME button, Volume Down button, and Power On button
5. You should now see a Download screen
6. Open Odin 3 v1.0
7. Click on the button “PIT” and load the “s1_odin_20100512.pit” file
8. Click on the button “PDA” and load the “I9000XXJP2-REV03-PDA-CL464213.tar” inside of the firmware download’s .rar file.
9. Click on the button “Phone” and load the “MODEM_I9000XXJP2.tar” inside of the firmware download’s .rar file.
10. Click on the button “CSC” and load the “GT-I9000-CSC-MULTI-OXAJP2.tar” inside of the firmware download’s .rar file.
11. Click the checkbox next to: “Re-Partition”
12. Your settings should now look like Figure #2
13. Plug your phone into your computer with USB Debugging on
14. Look at the gallery below to see if everything is going right
15. Once done, your phone will boot up
And now the phone Rebooted and I get the following message “update media, plase waite E:Cant mount /dev/block/mmcblk0p1 (invaild argument) E: copy_dbdata_media:Can't mount SDCARD: you storage not prepared yet. plase use UI menu for format and reboot actions. copy default media contenr failed.”
I have tried in vain to boot in the “Download Mode” to try and re flash the device and no luck.
I have tried using the following commands in SDK “C:\android-sdk_r06-windows\android-sdk-windows\tools\adb reboot-bootloader” and no luck
Am I hosed?
It seems to me that I need to reformat the internal SD Card but I cannot select any of the options in the Android System Recovery <3e>
The options I have are
Enter: OK Key, Select : Vol UP /Vol Down
Reboot system now
Applysdcard:update.zip
Wipe date/factory reset
Wipe cache partition
Format internal sd-card
The Volume rocket works to move between the above options but I can use the “OK” key nor any other to select an action
Any help is much appreciated, Thanks in advance.

[Q] How can I get out of Android sys rec<3e>

[Q] sd kernel open failed ?

hello..plz help me..when i try to install sd rom (boxmax ks or mix theme boxmaxmccm).when i perform the following steps after extracting the rom
Boot with MAGDLR:
1- copy folder (Android) to SD Card .
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "ANDROID" folder or the folder where you dropped the rom.
7- Now select "BOOT AD SD" and wait boot .....
i receive sd kernel open failed message in red colour..whai i have to do..am i missing something like latest kernel..? plz help me..

!!!
jasroop said:
hello..plz help me..when i try to install sd rom (boxmax ks or mix theme boxmaxmccm).when i perform the following steps after extracting the rom
Boot with MAGDLR:
1- copy folder (Android) to SD Card .
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "ANDROID" folder or the folder where you dropped the rom.
7- Now select "BOOT AD SD" and wait boot .....
i receive sd kernel open failed message in red colour..whai i have to do..am i missing something like latest kernel..? plz help me..
Click to expand...
Click to collapse
Same Problem

How to unlock pattern lock in any android one device with marshmellow

Flash Aroma Filemaneger ZIP via CWM and ByPass Pattern lock screen only for marshmellow device
1) Download the Aroma Filemaneger zip file from link
2) Move that zip file to the SDcard of your phone using a card reader.
3) Now insert that SDcard to you phone.
4) Reboot your phone into recovery mode (For this first switch of your phone and then keep pressing Volume Up+Home+Power button till recovery screen appear.)
5) Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above link
6) In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7) Go to bottom n select “mount all partition in start up ” then exit from aroma file manger
8) Now after exit , re-update that aroma file again and it will open again.
9) Go to data -- and then System (/data/system)Then find locksettings.db, locksettings.db-shm, locksettings.db-wal. choose delete and delete that file and restart.
its don:good:
--------------------DOWNLOAD LINKS------------------
AROMA FILEMANAGER :-http://forum.xda-developers.com/showthread.php?t=1646108

Database Info

welcome