[Q] sd kernel open failed ? - General Questions and Answers

[Q] sd kernel open failed ? - General Questions and Answers

hello..plz help me..when i try to install sd rom (boxmax ks or mix theme boxmaxmccm).when i perform the following steps after extracting the rom
Boot with MAGDLR:
1- copy folder (Android) to SD Card .
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "ANDROID" folder or the folder where you dropped the rom.
7- Now select "BOOT AD SD" and wait boot .....
i receive sd kernel open failed message in red colour..whai i have to do..am i missing something like latest kernel..? plz help me..

!!!
jasroop said:
hello..plz help me..when i try to install sd rom (boxmax ks or mix theme boxmaxmccm).when i perform the following steps after extracting the rom
Boot with MAGDLR:
1- copy folder (Android) to SD Card .
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "ANDROID" folder or the folder where you dropped the rom.
7- Now select "BOOT AD SD" and wait boot .....
i receive sd kernel open failed message in red colour..whai i have to do..am i missing something like latest kernel..? plz help me..
Click to expand...
Click to collapse
Same Problem

Related

noohwaleed

I have a Samsung Vibrant and this is exactly what happened. Please help me turn my phone back on.
Android System Recovery <3e> after using Odin3 v1.00
All:
I used Odin3 v100 to load Android 2.2 ROM
I followed the following steps
i9000XXJP2 Instructions
1. Remove the battery from your phone
2. Remove the SIM Card and MicroSD Card from your phone
3. Place the battery back on the phone
4. Hold down the HOME button, Volume Down button, and Power On button
5. You should now see a Download screen
6. Open Odin 3 v1.0
7. Click on the button “PIT” and load the “s1_odin_20100512.pit” file
8. Click on the button “PDA” and load the “I9000XXJP2-REV03-PDA-CL464213.tar” inside of the firmware download’s .rar file.
9. Click on the button “Phone” and load the “MODEM_I9000XXJP2.tar” inside of the firmware download’s .rar file.
10. Click on the button “CSC” and load the “GT-I9000-CSC-MULTI-OXAJP2.tar” inside of the firmware download’s .rar file.
11. Click the checkbox next to: “Re-Partition”
12. Your settings should now look like Figure #2
13. Plug your phone into your computer with USB Debugging on
14. Look at the gallery below to see if everything is going right
15. Once done, your phone will boot up
And now the phone Rebooted and I get the following message “update media, plase waite E:Cant mount /dev/block/mmcblk0p1 (invaild argument) E: copy_dbdata_media:Can't mount SDCARD: you storage not prepared yet. plase use UI menu for format and reboot actions. copy default media contenr failed.”
I have tried in vain to boot in the “Download Mode” to try and re flash the device and no luck.
I have tried using the following commands in SDK “C:\android-sdk_r06-windows\android-sdk-windows\tools\adb reboot-bootloader” and no luck
Am I hosed?
It seems to me that I need to reformat the internal SD Card but I cannot select any of the options in the Android System Recovery <3e>
The options I have are
Enter: OK Key, Select : Vol UP /Vol Down
Reboot system now
Applysdcard:update.zip
Wipe date/factory reset
Wipe cache partition
Format internal sd-card
The Volume rocket works to move between the above options but I can use the “OK” key nor any other to select an action
Any help is much appreciated, Thanks in advance.

[Q] How can I get out of Android sys rec<3e>

problem booting MCCM DS V4.0

help me..when i try to install sd rom (MCCM DS V4.0).when i perform the following steps after extracting the rom
Boot with MAGDLR:
1- copy folder (Android) to SD Card .
2- Boot in MAGDLR powering on your phone while you press the power button until MAGDLR appears.
3- Select "SERVICES"
4- Select "BOOT SETTINGS"
5- Select "AD SD Dir"
6- Select the "ANDROID" folder or the folder where you dropped the rom.
7- Now select "BOOT AD SD" and wait boot .....
i receive load zImage and SD kernel open failed message in red. what do i have to do..am i missing something like latest kernel..? plz help me.. the folder does contain a file zImage

A2107A-H Firmware update, Custom Rom and CWM Recovery (calling feature - unlocked)

Finally it happend, NEW CUSTOM ROM (CWM Backup Mode) made by me.
screenshots
https://www.dropbox.com/sh/yc7z5904i0e1ua6/6FSVniszMM#/
Just see it in action: http://www.youtube.com/watch?v=joeJtkw-85c
- CWM Recovery
- Firmware version S314
- Calling feature
- Fully working google service
- Fully Roted
- Titanum Backup
- TouchPal Keyboard
- Stock Browser
- Full synchronization with google service
- Radio without headphones
and many more
The installation is very simple and will take about 5 minutes if you already have a CWM Recovery
I spend nearly whole week to build this customisation, so I decide to ask you guys for some support for my work. So if you like the job I done so far and want to see a new improvements in a future including a Jelly Bean on Lenovo A2107A-H please support me. In this case I made a auction on a EBAY for this modiffication and it will cost just a £5. Please respect my work and don't distribute my mod behind my back. If you not agreed with this, I waiting for your coments guys. Thank you.
http://www.ebay.co.uk/itm/221163148...l?_sacat=0&_from=R40&_nkw=221163148891&_rdc=1
I will send you a link to a firmware and manual after a payment
Enjoy!!!
OLD MANUAL (no files on a server)
Manual and files for installation Custom ROM + CWM Recovery + IMEI repair + ROOT + Calling Feature on IdeaPad A2107A-H
Password for archive:"xdadevpemergency"
Firmware
1. CWM Recovery ROM.
https://rapidshare.com/files/3358458529/CWM Firmware.zip
2. A2107A-H v9 ROM in a zip format for install by CWM Recovery.
https://rapidshare.com/files/241044528/A2107A-H v9.zip
3. Google apps for google store and account sync (installation by CWM Recovery)
https://rapidshare.com/files/2713449644/gapp-ics.zip
Tools
1. SP Flash Tool for formating device NAND FLASH.
https://rapidshare.com/files/1465167471/SP_Flash_Tool_v3.1206.01.zip
2. Smarthphone Multiport for Flash the CWM REcovery ROM.
https://rapidshare.com/files/2880421726/SP_MDT_src_v3.1216.02_A2012.05.22.zip
3. MTK Droid Tools for easy IMEI repair and easy ROOT install.
https://rapidshare.com/files/3431631170/MTKdroidTools.zip
Manual
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Installing main firmware
1. Copy A2107A-H v9.zip and gapp-ics.zip to sd card.
2. Boot in to CWM Recovery mode by:
- Press the "reset" button on your device
- Press and hold for a 3 sec. "power" button on your device (after 3 sec. releas the buton)
- When you see "lenovo" logo press and hold vol+ and vol- untill you will boot in to CWM Recovery mode
In a CWM Recovery Mode
Menu down = vol-
Menu up= vol+
accept= power button
1. Choose "wipe data/factory reset"
2. Choose "wipe cache partition"
3. Choose "Advanced" -> "Wipe Dalvik Cache"
4. Go to main menu of CWM Recovery mode
5. Choose "install zip from sdcard"
6. Choose "choose zip from sdcard"
7. Find the A2107A-H v9.zip file.
8. Choose "Yes - Install A2107A-H v9.zip"
Do the same think with gapp-ics.zip and reboot your device.
IMEI repair and ROOT installation
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
On this point you should have a IMEI working, if not repeat IMEI repair from point 3.
5. Press ROOT button if the program ask for anythink press "YES" (your device will reboot 2 or 3 times and it will be ready to go).
Click to expand...
Click to collapse

Reupload Please

Please reupload the tools section.
Thank you in advance

I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?

pemergency said:
I will but I dont know where, they was on rapidshare, Blocked already, on a dropbox, blocked already. Any ideas where to upload them?
Click to expand...
Click to collapse
Hi there,
Can you try http://uploaded.net/ ?
I used it for many files so far and seems to work OK.
Thank you.

re
yesterday on Chinese side get everything.
flashed - rom (lots of Chinese garbage) does - only Chinese and English.
English also very buggy - phone goes.
sorry ... google translator

.................................................

german language ?

Yes for settings and all stock app. All apps added by myself are not translated
Sent from my GT-N7000 using xda app-developers app

brief assessment of the costum rom "pemergency" mod = which must be paid
- Setup / flash -> OK
- IMEI must be corrected manually by terminal as tool does not work
- Constant error message "simcard failed" (slot2) although only 1 slot has
- "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
- Spoke only Russian / English / chinese integrated as standart
- Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?

mrbonsen said:
brief assessment of the costum rom "pemergency" mod = which must be paid
a) Setup / flash -> OK
b) IMEI must be corrected manually by terminal as tool does not work
c) Constant error message "simcard failed" (slot2) although only 1 slot has
d) "apex launcher" can not uninstall, then stops at the boot process lenovo screen -> I would also like to use but "default / original" surface.
e) Spoke only Russian / English / chinese integrated as standart
f) Morelocale2 indeed is an alternative but not "original"
ok, first feedback - hope the rom is modified?
Click to expand...
Click to collapse
a) no comment
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
c) This Rom is for A2107a-h which is a 2 slots device, so I dont see a problem on this point
d) I said as this is modiffication, I decide to remove a stock launcher, you can install any other one of your choice
e) I also answered to your question as for german language only original apps are translated and the main system, on other threeead is clearlly said as this rom using more locale 2 for translation.
f) and as a last one, why you expecting anything original in a modiffied ROM?
I stoping to doing anything with this ROM for a simple reason:
- FREE ROM = 900 downloads,
- PAID ROM FOR £5 = 5 downloads - embarrassing
Why?
and one more thing...
My correspondence with mrbonsen, when I tried to help him out with the installation process is also interesting. About 10 emails with instructions to mrbonsen and also 10 emails of insults from mrbonsen. That means something....
So conclusion is simply... go back to your original firmware and I will give you your £5 back

and also 10 emails of insults from mrbonsen.
Click to expand...
Click to collapse
I would, at least at three mail the conversation ended :victory:
b) IMEI must be corrected and it is mentioned in a manual, it doesnt need to be done by terminal, you can simple generate a file and swap with a root explorer
Click to expand...
Click to collapse
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex

mrbonsen said:
I would, at least at three mail the conversation ended :victory:
if you tool mitsendest + description for the correction of the IMEI, it should work well. not every user knows another solution
But no matter now - can only recommend not to use this rom :good:
ask no insult but (as in the mails) what's wrong on the screen, apex launcher bug or "bug mrbonsen" - display does not turn or apex
Click to expand...
Click to collapse
Hehe, ok, this is all my fault, I just should expecting as this ROM could be installed by a persona like you, my bad
BTW I using this ROM from a weak or more and have no problem at all. Waiting for comment from other users ...
Sent from my IdeaTab A2107A-H using XDA Premium HD app

And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app

pemergency said:
And one more thing, what model do you have? if anything was wrong you could always ask, you didn't so....
Sent from my IdeaTab A2107A-H using XDA Premium HD app
Click to expand...
Click to collapse
You did a great job and 900 downloads are impressive. i have a A2107A-H 1GHz 1GB RAM 16GB Flash - how come nobody is providing feedback or helping out in this development? Could there be a way to update.zip just the standard factory ROM? maybe that could be possible by doing a diff on the chinese and european source code? sorry i'm just a lamer looking to help out. any news from lenovo developers on the 4.1 release?
today is your cwm rom accessible for download for trial?

Ofcourse it is possible to get back the standard ROM just ask someone who still have a European ROM to do a copy by nandroid backup and you can restore this by centeCWM. So after that you will have a stock ROM with CWM but without calling feature.
I nearly finish another ROM with calling feature but this will be based on Russian ROM. I just need to get European system backup to do it same thing with European ROM.
Sent from my IdeaTab A2107A-H using XDA Premium HD app

Password for CWM Firmware : xdadevpemergency
NEW MANUAL AND FILES (discontinued project)
For both option's copy "clockworkmode/backup/modpemergency" folder to sdcard internal or external!!!
OPTION 1: For CWM Recovery devices:
Downloads:
Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your internal storage or external sdcard.
It should looks like this one:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore from internal sdcard" or "advanced restore" in a case of using external card
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advanced/wipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
OPTION 2: For non CWM recovery devices
Copy clockworkmode/backup/modpemergency to your external card, it should looks like this:
/sdcard/clockworkmode/backup/modpemergency (nandroid.md5 and system.ext4.tar inside this folder)
downloads:
1. CWM Recovery https://hotfile.com/dl/182805290/fe4ac19/CWM_Firmware.zip.html
2. Flash Tools https://hotfile.com/dl/182820835/8dd3c06/Tools.rar.html
3. New Flash Tool without error (replacement for the one from Tools.rar package https://hotfile.com/dl/183057140/692cbbb/SP_MDT_src_v3.1216.02_A2012.05.22.zip.html
4. Pemergency MOD custom firmware https://hotfile.com/dl/182755080/f7d30b5/07122012.rar.html
5. USB Driver
For windows xp https://hotfile.com/dl/182950442/360c725/USB_VCOM_Driver.zip.html
For windows seven https://hotfile.com/dl/182950251/0c9ee3d/usb_driver.zip.html
Install CWM Recovery:
Device formating
1. Open SP Flash Tool
2. Choose a "Scatter-loading" file from "CWM Recovery ROM" folder
3. Press "Format" in a left top corner of SP Flash Tool
4. Choose "Auto Format Nand Flash" -> "Format whole flash" and press "OK"
5. Connect device to PC, press "reset" button on a back of your device
Your device should be formated on this point.
6. Close SP Flash Tool
Installing CWM Recovery ROM
1. Open Smartphone Multiport
The "Data source file" and "Da file name" should have assigned path from SP_MDT_src_v3.1216.02_A2012.05.22 folder. If is not assigned properly please do the folowing steps:
- File/Open Download Agent File and choose file MTK_DATABASE.mdb from SP_MDT_src_v3.1216.02_A2012.05.22 folder
and
- Factory database/Setup data source file and choose file MTK_AllInOne_DA.bin from SP_MDT_src_v3.1216.02_A2012.05.22 folder
2. Press the "Scatter File" button and choose this file from a CWM Recovery ROM folder
3. Tick to both "Sel All"
Settings for Smartphone Multiport:
Type: Firmware upgrade
Baud rate: 921600
DA download all: High speed
USB Port: BootRom --->DA
4. Press Start all
On this point firmware should be downloaded on your decive, if nothing happend press the "reset button" on a back of your device.
After this operation you will have a CWM Recovery, but not a main firmware!!!
Install pemergency custom ROM
1. Unpack archive 07122012.rar
2. Copy whole folder clockworkmode to your external sdcard.
Boot in to CWM Recovery:
1. switch off dfevice
2. Hold Power Button for 3 sek, release and hold vol+ and - together untill you will boot in to recovery mod
In CWM Recovery:
1. Choose "backup and restore"
2. Choose "advanced restore"
3. Choose "modpemergency/"
4. Choose "Restore system"
5. Choose "Yes - Restore System"
After update choose
1. "wipe data/factory reset"
2. "wipe cache partition"
4. "advancedwipe dalvik"
5. reboot.
It will take a while to boot for a first time so no worries
After that sometimes it is nessesary to repair IMEI
IMEI repair
1. Connect your device to the PC (device must be turned on and connected as "USB debugging" and "Media device)
2. Start MTK Droid Tools
3. Press Replace IMEI (fill up IMEI 1 and IMEI 2) and save
4. Reboot device
Good Luck...

NEW ROM on the way. Will be posted on the end of this week.
- oryginal multilanguage for most of languages like in a stock european ROM (not more locale)
- fixed most bugs from the previous pemergency mod
- stock launcher
- Battery life incresed to 30% more then oryginal ROM
- Battery status in a settings
- Downloading all apps from google store (no incompatibility problem)
- Quick Boot
- Better sim management
- All options for synchronisation, like in oryginal european stock ROM
and many many more...
Finished in 98%
Anyone would like to pay for this £5?
Free update for everyone who bought the previous version!!!

ok, I certainly update :good:
may inform some user from the German forum.
pretty much at the end of the page
http://www.android-hilfe.de/lenovo-ideapad-a2-forum/341347-a2107a-root-cwm-custom-rom-5.html

How to unlock pattern lock in any android one device with marshmellow

Flash Aroma Filemaneger ZIP via CWM and ByPass Pattern lock screen only for marshmellow device
1) Download the Aroma Filemaneger zip file from link
2) Move that zip file to the SDcard of your phone using a card reader.
3) Now insert that SDcard to you phone.
4) Reboot your phone into recovery mode (For this first switch of your phone and then keep pressing Volume Up+Home+Power button till recovery screen appear.)
5) Then select “update” and select “apply update from SD/external” and select aroma file manger.zip file that you downloaded using above link
6) In aroma File manager , Go to menu , which is located in bottom strip and then select Settings.
7) Go to bottom n select “mount all partition in start up ” then exit from aroma file manger
8) Now after exit , re-update that aroma file again and it will open again.
9) Go to data -- and then System (/data/system)Then find locksettings.db, locksettings.db-shm, locksettings.db-wal. choose delete and delete that file and restart.
its don:good:
--------------------DOWNLOAD LINKS------------------
AROMA FILEMANAGER :-http://forum.xda-developers.com/showthread.php?t=1646108

Database Info

welcome