Database Info

Myn Warm Donut POLA200 - Wifi not working NAND / Haret method

Hello.
I am currently trying all versions of Android mentioned in this forum to try and find a stable and compatible version that i can run day to day. Unfortunately i have not yet found a combination that enables wi-fi. The ecliar version enables wi-fi however cannot connect to anything. I am currently using Myn Warm Donut loaded by NAND method. Everything working ok except wi-fi. I have tried both types of NBH files and have tried both methods following instructions contained in the foums. I have also updated with most fixes for wi-fi found in this forum and still not joy.
Does anyone have the same issue? Is this related only to a POLA200? Does anyone have a work around?
Kind Regards
AC

Did you use android update?

Yeah i used android update, before booting into the o/s. I fixed the permissions but nothing changed. Wi-fi will not enable at all. I only have internet access from my network providor.
Kind Regards
AC

[Q] No mobile internet on HTC Polaris with Android

Hi,
I managed to install Android on my HTC Polaris using HaRET. Everythings works fine (GSM, WLAN, GPS, Bluetooth) except mobile internet via GPRS, EGDE or UMTS. I updated the radio to the latest version I could find for my Polaris (1.65.38.14). I even called my mobile carrier (O2 Germany) to get the correct APN settings. With WM the connection via UMTS works perfectly.
Any ideas what goes wrong? If I would be able to solve this problem, I would abandon WM and flash Android on my phone.
I tried Android 2.1 and 2.1, but the problem remains.
Here are the details of my setup:
Device: O2 xda Orbit 2, i.e. HTC Polaris 200
Android: 2.2
Kernel: 2.6.25-01130-g99a3b07-dirty bell(at)bell-laptop #383
Build:eu_vogue-userdebug 2.2 FR91 eng. martin.20100711.172453 test-keys
Thanks for any help,
Ralf

you can try following to activate mobile inet connection:
- put your phone into airplane on - airplane off
- (re)enter your apn via settings - wireless&network - mobilenetworks - access point names - press menu to enter new apn(s) or reset to defaults.
- force connection using modem.apk (connect/disconnect)
- reinstall/install another build, leave data
- install togga (toggle data connect), put on your sdcard and install via file manager
- use another zImage
- use stock radio
HTH

rhaller said:
Hi,
I managed to install Android on my HTC Polaris using HaRET. Everythings works fine (GSM, WLAN, GPS, Bluetooth) except mobile internet via GPRS, EGDE or UMTS. I updated the radio to the latest version I could find for my Polaris (1.65.38.14). I even called my mobile carrier (O2 Germany) to get the correct APN settings. With WM the connection via UMTS works perfectly.
Any ideas what goes wrong? If I would be able to solve this problem, I would abandon WM and flash Android on my phone.
I tried Android 2.1 and 2.1, but the problem remains.
Here are the details of my setup:
Device: O2 xda Orbit 2, i.e. HTC Polaris 200
Android: 2.2
Kernel: 2.6.25-01130-g99a3b07-dirty bell(at)bell-laptop #383
Build:eu_vogue-userdebug 2.2 FR91 eng. martin.20100711.172453 test-keys
Thanks for any help,
Ralf
Click to expand...
Click to collapse
Have you put the MMC and MNC values for the APN correctly? I had that problem.

Hello,
as posted in another answer, none of warm donut, eclair and froyo was able to get my XDA2(Pola200) online by 3G due booting from haret.
Also none of the tricks given above and in another posts and wikis(i tried everything, believe me)had done the trick.
After flashing it on NAND (Kallt_kaffes eclair RLS7c with latest available eclair kernel), 3G was starting out of the box after boot, w/o further configurations. Curiously with an apn entry from O2. I use a prepaid provider which is based on the O2 network but it has another apn name.
Better be careful, maybe it will be an expensive experience, to go online with the wrong apn entry - in my case it wasn`t.
Anyway, dont`t know what`s the difference relatet to the hardware of my device between Haret and NAND boot and not/working modem.
Matthias

hi matthias,
i have a very similar problem here in austria, using Yesss (which is using the Orange network). i can't get any data connection with froyo build. so i switched back to eclair (VaniljEclair_RLS7c) and 3g connection works out of the box - curiously with an apn from orange.
no idea what is wrong with froyo?
i'm using polaris 200 (xda orbit 2) with haret boot.

[Q] Huawei e1750 on ZT-180

I have a Huawei E1750 3G USB modem that I want to make working on the ZT-180 tablet. Until now I have not been successfull to get it working, although it is working on my notebook and with the Flytouch2 out-of-the-box.
I have searched forums for a solution, but have not been able to get it working until now.
I have tried the following, which is not working on the original FW that the ZT-180 comes with and with the new Android 2.2 FW.
Create APN
Use APN manager(s)
Manually edit configuration files like init.gprs-pppd
Checked for errors in dmesg
tried to run init.gprs-pppd manually, no error messages
I have disabled CDROM and MicroSD emulation on the stick
I tried to switch between ttyUSB0 to ttyUSB3
Checked the permissions on the files (init.gprs-pppd) and folders (ppp) as mentioned in some posts
I hope that the experts on XDA (hehe) can help me out!
Thank you in advance!

i9003 wifi problem

I have a big problem with wifi connection... it's very slow to connect and often don't work...
there is a solution... some system file that i can replace (copyng fron i9000).
My firmware is KB1.

Absolutely no problem with Wifi. whether on DDKB2 or XXKB3. May be check your wifi encryption mode.

i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??

scheccia said:
i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??
Click to expand...
Click to collapse
In XXKB3 a lot of bugs was solved. I think you should try it.
Sent from my GT-I9003

im having wifi issues too!
im using kb2 and i always disconnects in our wifi...
other deices like our laptop doesn't disconnects, only my galaxy sl.

Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...

Nightwish sgsl said:
Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...
Click to expand...
Click to collapse
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.

thanks very much...

Wifi driver problem
I have DDkb2 firmware, whenever i try wifi on i get wifi related in logcat after 5 seconds as per default wifi supplicant scan interval time , i try to change this interval time by modifying build prop file , but it can not change, wifi running good but write error -- wpa_driver_tista_rssidata error.

I have flashed my phone to XXKB 3 but noting happens.....
my phone can't detect any wifi connections, while other nokia phones can

DDKF1 WiFi Issue
Guys, I updated to DDKF1 (recently released for India). And the WiFi just not working! Same configuration/credentials had worked on earlier version
Anyone who have had same problem; please help!

I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.

Flash to a more stable firmware like kb3 or kph.
Sent from my GT-I9003 using XDA App

trip007in said:
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.
Click to expand...
Click to collapse
Trip, do not use WEP encryption in this day and age, one can crack it with widely available tools in mere seconds. I'm using WPA2-PSK with AES encryption (D-Link DIR-655) on my phone (XXKPH firmware) just fine. If there's a problem it might be one or combinations of the following:
. Firmware issue
. Incompatibilities between wireless access point and your phone

19crytek88 said:
I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.
Click to expand...
Click to collapse
What firmware did you flash? I have some problems with the Gingerbread versions of Android. If you flashed XXKPH or JPKP5 try to connect to your router and ping your router ip and some external ip (like google DNS 8.8.8.8). If your router pings well and you have about 70÷80% lost packets while pinging external IP. you have the same problem as mine. To solve it you can:
1. flash Froyo
2. change your WiFi router (I've tested 3 routers and I have problems only with 1)

I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd

ybyb said:
I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd
Click to expand...
Click to collapse
Don't update id you want to sure it to three service center. Also, try nagging the phone forget the wi fi connection and set the password again. This worked for me!
Sent from my GT-I9100 using xda premium app

[Q] unable to connect to VPN on ICS 4.0.3 Nexus S i9023

I have updated my 9023 to ICS 4.0.3 manually twice, but each time I was unable to connect to VPN, I have tried both PPTP and L2TP/IPSec PSK which works well on PC or GB2.3.6.
It shows timeout or unsuccessful.
I noticed that tha aLogCat record this for several lines(when connecting via L2TP/IPSec PSK):
D/mtpd (2682): Timeout ->Sending SCCRQ
Click to expand...
Click to collapse
and this leads to "Timeout" error
my baseband version is I9023XXKI1
build number is IML74K
hope it could be solved. and if more logs are needed, please let me know.

Same issue on Galaxy Nexus running 4.0.2
Baseband: I515.09 V.EK05 / I515.EK02
Kernel: 3.0.8-gaaa2611
Build #: ICL53F
Looking at the gateway logs, Phase 1 negotiation completes, then receives nothing more from the phone to complete Phase 2.

Same here, am really disappointed as it worked really well on GB2.3.6
Why do they fix something then take it away? Idiots

I solve the PPTP problem by changing the permission of \etc\ppp\ip-up-vpn to 777 (all option is checked). but L2TP remains annoying.