I have a big problem with wifi connection... it's very slow to connect and often don't work...
there is a solution... some system file that i can replace (copyng fron i9000).
My firmware is KB1.
Absolutely no problem with Wifi. whether on DDKB2 or XXKB3. May be check your wifi encryption mode.
i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??
scheccia said:
i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??
Click to expand...
Click to collapse
In XXKB3 a lot of bugs was solved. I think you should try it.
Sent from my GT-I9003
im having wifi issues too!
im using kb2 and i always disconnects in our wifi...
other deices like our laptop doesn't disconnects, only my galaxy sl.
Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...
Nightwish sgsl said:
Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...
Click to expand...
Click to collapse
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.
thanks very much...
Wifi driver problem
I have DDkb2 firmware, whenever i try wifi on i get wifi related in logcat after 5 seconds as per default wifi supplicant scan interval time , i try to change this interval time by modifying build prop file , but it can not change, wifi running good but write error -- wpa_driver_tista_rssidata error.
I have flashed my phone to XXKB 3 but noting happens.....
my phone can't detect any wifi connections, while other nokia phones can
DDKF1 WiFi Issue
Guys, I updated to DDKF1 (recently released for India). And the WiFi just not working! Same configuration/credentials had worked on earlier version
Anyone who have had same problem; please help!
I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.
Flash to a more stable firmware like kb3 or kph.
Sent from my GT-I9003 using XDA App
trip007in said:
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.
Click to expand...
Click to collapse
Trip, do not use WEP encryption in this day and age, one can crack it with widely available tools in mere seconds. I'm using WPA2-PSK with AES encryption (D-Link DIR-655) on my phone (XXKPH firmware) just fine. If there's a problem it might be one or combinations of the following:
. Firmware issue
. Incompatibilities between wireless access point and your phone
19crytek88 said:
I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.
Click to expand...
Click to collapse
What firmware did you flash? I have some problems with the Gingerbread versions of Android. If you flashed XXKPH or JPKP5 try to connect to your router and ping your router ip and some external ip (like google DNS 8.8.8.8). If your router pings well and you have about 70÷80% lost packets while pinging external IP. you have the same problem as mine. To solve it you can:
1. flash Froyo
2. change your WiFi router (I've tested 3 routers and I have problems only with 1)
I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd
ybyb said:
I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd
Click to expand...
Click to collapse
Don't update id you want to sure it to three service center. Also, try nagging the phone forget the wi fi connection and set the password again. This worked for me!
Sent from my GT-I9100 using xda premium app
Related
Hi, I have set up barnacle wifi tether i connected to it using my laptop . it connects fine but no internet access.
have i missed somthing out ?
duffy1807 said:
Hi, I have set up barnacle wifi tether i connected to it using my laptop . it connects fine but no internet access.
have i missed somthing out ?
Click to expand...
Click to collapse
You gotta change the LAN setting... Add athwlan0
Can somebody please post the .apk for Barnacle? I'm not able to find it in the Market at all.
cue_32 said:
You gotta change the LAN setting... Add athwlan0
Click to expand...
Click to collapse
Hi, i have already done this but still doesnt work. thanks
For anybody else who might come along and not be able to get the .apk from the Market, you can download it here:
hxxp://szym.net/barnacle/barnacle.apk
I had to install with ASTRO to get it to work.
duffy1807 said:
Hi, i have already done this but still doesnt work. thanks
Click to expand...
Click to collapse
Go to DHCP (under the Advanced heading) and set DNS 1 to 8.8.8.8. Then restart barnacle and reconnect your laptop. Then manually set the DNS for the connection on your computer to the same address. That worked for me.
SirBrettrick said:
Go to DHCP (under the Advanced heading) and set DNS 1 to 8.8.8.8. Then restart barnacle and reconnect your laptop. Then manually set the DNS for the connection on your computer to the same address. That worked for me.
Click to expand...
Click to collapse
I did that, once I press ok I got invalid IP
Using Rogers (service provider, dataplan 1GB) Canada
I rooted my x10 following the instructions from Bin4ry from step 1 to 3 and step 4 and 5 I used the link that jerpelea posted, it seems everything went smoothly but something is wrong with my mobile networks, I can only use browser, everything is fine for browsing but per example if I use flixter I can't get any connection, facebook or any applications that needs to use network, and I turned on the wifi and using my home router all applications are fine, and I don't know what's going on, and I rooted again same issue, can anyone tell me is there something I'm missing too?
and for barnacle same issue as OP, my ipod touch is connected but no internet connection at all and I followed what to put in LAN already, does anyone encounter this issue too?
any help is appreciated, thank you
cue_32 said:
You gotta change the LAN setting... Add athwlan0
Click to expand...
Click to collapse
I add athwlan0, and it said it was not a correct LAN, so I removed and that error went away. Now I am getting "Failed to set AP_SCAN". Does anyone know how to get rid of this error?
try taking wifi off, leave 3g on n insert the athwlan0 in lan area.. should work fine?!
Sent from my X10i using XDA App
Mobzter said:
try taking wifi off, leave 3g on n insert the athwlan0 in lan area.. should work fine?!
Sent from my X10i using XDA App
Click to expand...
Click to collapse
It returns:
Setting address of athwlan0 failed: No such device
NAT waiting for local interface
Getting address of athwlan0 failed: No such device
Gettign netmask of athwlan0 failed: No such device
Could not get flags of athwlan0: No such device
[2] Terminated ./nat
Process stopped unexpectedly
Any help?
is your phone rooted?
andyx8 said:
is your phone rooted?
Click to expand...
Click to collapse
Yes, I believe so. I used Unrevoked, and now when I start Barnacle it no longer tells me I need su privileges. Is there another way to check?
Install busybox.. might already be on your phone! it'll show u if ya rooted or not!
Sent from my rooted x10i using swype via xda!!
Mobzter said:
Install busybox.. might already be on your phone! it'll show u if ya rooted or not!
Sent from my rooted x10i using swype via xda!!
Click to expand...
Click to collapse
Yes, Busybox shows that my phone is rooted. But, it also says it is not nand unlocked.
> athwlan0: No such device
trying with tiwlan?
is there a way to connect a DS to an android phone using barnacle wifi?
try this
wan: rmnet0
lan: athwlan0
worked fr me..
Minoru Saiki said:
> athwlan0: No such device
trying with tiwlan?
Click to expand...
Click to collapse
tiwlan0 is for mini/mini pro
unless he has one of these little xperias he will have no luck with that (otherwise its clear why he got that error ^^)
I tryied athlan0 to LAN
i have rm.. to WAL
i tryied setting DNS
no password set
i'm definately rooted
but since i reseted my phone and upgrated to 026
it's connected, it's uploading but there is very very small downloading
It used to word fine, but now i don't know what to do.
Any more idea?
cvchetan said:
try this
wan: rmnet0
lan: athwlan0
worked fr me..
Click to expand...
Click to collapse
i have tryed with these settings and its working.
thnx
Hi all
I have problem with sharing internet over WiFi. A have new ROM KPU. When i have old rom KPQ everything work fine . The problem looks like, when i switch ON sharing internet on i9003 , laptop find the network and connects. But without internet. On i9003 display i see dead icon internet activity.
Where is problem ? Can i back to lower ROM ?
Thx for advice
Sorry for my english :-/
Are all the phone internet based apps working? And YES U CAN USE ANOTHER FW! KPQ for instance without any issues, just flash from pit, or use the four files of the same posted recently! gud luck mate! :thumbup:
☞★sent from drajax's Galaxy SL!!! *♂ツ
Yes all apps based on internet on phone work fine but the Hotspot doas not work very well :-/. Ok i turn back to lover rom.
How to back to rom with working hotspot for me?
Download firmware from samsung firmware and use only Odin to flash?
In zip/rar file i find only 1 file.
Which it's means "pit"?
Where i find another 4 files this ROM about what you write ?
Thx for advice
ymmi21 said:
Hi all
I have problem with sharing internet over WiFi. A have new ROM KPU. When i have old rom KPQ everything work fine . The problem looks like, when i switch ON sharing internet on i9003 , laptop find the network and connects. But without internet. On i9003 display i see dead icon internet activity.
Where is problem ? Can i back to lower ROM ?
Thx for advice
Sorry for my english :-/
Click to expand...
Click to collapse
are you trying with some app or with the native mobile ap?
If you want to tether your Phone's Data Connection via USB or WiFi, Here are the steps:
1. Go into settings
2. Wireless and network
3. Tethering
Via USB
4. Click on USB Tethering
Via WiFi
4. Click on Mobile AP
5. Go into Mobile AP Settings
6. Click on Configure Mobile AP
7. Give a name to your WiFi Hotspot you just created
8. Create a password or make a open Hotspot ( Whatever you like )
Your HotSpot is created using your Mobile Data Connection
Now Go into your wifi settings in your PC and connect with the Wifi you just created !
[ Solved ] Working 100% - Enable WiFi ad-Hoc Networking for Both ICS and GB for htc Sensation
For GB , this Patch will enable ad-hoc 100% steady connection for both ( WEP and open Networks ) , Also Hotspot WPA2-PSK is still able to connect
For ICS , the APK will enable ad-hoc 100% steady connection with Full WiFi Signal for both ( WEP and open Networks ) , and for Hotspot WPA2-PSK use through regular wifi menu
General
Android does not show this Ad-hoc networks ( it Finds them in the search , but filters them out of the shown results ) , this patch prevent that filtering and shows those ad-hoc networks
There are two types of WiFi Networks :
Infrastructure ( Hotspot ) WPA,WPA2-PSK which is the most secured connection , usually routers broadcast this
Ad-hoc it is either WEP or open network which is less security , usually issued through a laptop connected to a DSL line to broadcast a temporary WiFi connection
DISCLAIMER
I am not responsible if flashing this Mod results in bricking your phone
for Rooted devices
ad-Hoc Networking for GB
Download Link
See attached Patch Ad-hoc Sensation-Ad-hoc.zip ( Full Credit and thanks to leeDroid )
ZT-180 Adhoc Switcher APK can also work with GB , But i prefer the permanent solution of the above Patch for GB
Apply the Patch
it is always good to do a Backup for your data , Or Just Backup the original file " wpa_supplicant " located in System\bin .
to restore the original file " wpa_supplicant " any time :
just open the Patch in a winrar window and navigate to System\bin and over-right the one in the Patch with the original ( you can get the original from your Rom zip ) . apply the modified Patch from recovery and you are back to the original
if you use Root Explorer to restore the original file ,make sure to set the correct permissions and ownership values
Clear Dalvik cache , and install the Patch from recovery as usual
ad-Hoc Networking for ICS
it is always good to do a NAND Backup for your Rom and data
there is an APK named " ZT-180 Adhoc Switcher " which i geuss is not intended for Sensation but can support additional devices in the try Mode , this APK has two modes
infrastructure mode infrastructure mode.jpg ( will not be used , for Hotspot WPA2-PSK use regular wifi menu )
and " Just to try " ad-hoc mode for non supported devices Just to try ad-hoc mode.jpg that we interested in
the " Just to try " ad-hoc mode worked fine with Sensation
it connects fast , very steady connection with full Wifi Signal and a fast WiFi Data transfer , Ad-hoc it is working for both WEP or open network , Please note that some firewalls could prevent you from connecting even after adjusting its settings
Ad-hoc ( open Network ) :
open network connection doesn't require a Password ,
to modify either SSID name or WEP password , go to setting while you are in infrastructure mode and modify or clear the name in SSID then just switch back to Just to try mode and enable WiFi
if you clear ( remove ) the default name in SSID , this lets the device find and connect automatically to any open ad-hoc you establish from your laptop for example with any name of your choice ( on condition that your ad-hoc connection should be the only available ad-hoc connection in range ) ,
if you leave the default name in SSID "Android tether " as it is , it will only look for a connection with the name "Android tether " that is issued from your laptop and it will not detect any ad-hoc connection with any other name
if there is more than one open network in range that can be seen by the APK then
tip 1 : name the connction in your laptop same as in device SSID ( i.e android tether )
this is because if there is more than one open ad-hoc network and you left the SSID name empty , you can not control which connection the APK will choose to connect to
tip 2 : or use Ad-hoc ( WEP Network )
Ad-hoc ( WEP Network ) :
if you want to use WEP connection , go to setting while you are in infrastructure mode then enter SSID name and Password then switch back to Just to try and enable wifi WEP Password.jpg
the name of the connection should be the same name of the connection you started on your laptop for example
there is a complete help for the APK when you press the thin line under setting
Superuser.APK
if you are using the normal Super user APK opens normal , But if you are using the New SuperSU APK there will be a delay of maybe 5 sec for starting or executing Commands
please read this first #70 , Please note that this APK is not fully compatible with sensation although it worked fine with me
there is another APK ( try it if you like to ) named " WiFi AD HOC enabler " which doesn't really work good ( very weak signal and disconnects frequently ) , or at least this is what i experienced
Connectify Pro
there is a small yet powerful PC Software Called Connectify Pro ( i can't do without it ) that does three things :
it is for windows users
Acts like an actual hardware Router ( Not software networking )
toggle wifi with a single click for either ad-hoc or hotspot ( can start the same ad-hoc connection after reboot )
automatically does all complicated configurations for all types of network to fit with your firewall and windows , also share and transfer files among other options
Press the thanks Button for this Post
There is an application similar to connectify, hostapd for ubuntu which I use all the time . But both the application ( connectify and hostapd is hardware depended . If your wifi Card supports infrastructure mode or master mode , then only they will work. ) So this work around will help those users.
Thanks for your post dear..
Nit worked to me with ICS ,
It works!!!
I'm using HyperNonSense-v2.4
Thank you!!!
Is wifi hotspot bit working for some? I'm confused.
Sent from my HTC Sensation using Tapatalk
Please delete... googling got me
blackchad said:
i literally cannot figure this out... the instructions are really vague. "install the patch as usual from recovery" what is usual? you dont say. i backed up the wpa file and just used root explorer to overwrite it and it instantly broke my wifi. i restored the original so it came back fine but i dont know how to install patch from recovery as usual. obviously the APK says i dont have all of the files and must close. please help. running ICS viperrom 1.01
Click to expand...
Click to collapse
It means boot into recovery and flash it as you would a Rom
Sent from my HTC Sensation 4G using xda app-developers app
i feel very retarded... thank you very much
blackchad said:
i feel very retarded... thank you very much
Click to expand...
Click to collapse
No problem, mate.
Sent from my HTC Sensation 4G using xda app-developers app
ok, after reading the post for the 10th time i guess im not supposed to apply the patch since im on ICS? well, i restored completely to before i tried to get adhoc working and just installed the APK and it still didnt work. said i didnt have all the files and it must close. the link to the APK in the play store doesnt work because sensation isnt supported and i just had to find it online. Could it maybe be the APK that im using? Does anyone have a working one they could send to me or any ideas to a solution?
It's not work with the latest Sense 4 build (HTC Ville C2 latest RUU (1.11.401.110) Android 4.0.3 ICS). So can you tell me how did you do with the wpa_supplicant file please? I want to modify it myself.
is it only working for HTC OR any GB ROM ?
Thanks
what are the specific steps in applying the patch?
whats needed? and steps?
thanks
Is it just depends on replacing wpa_supplicant file, or something more?
Because author of this apk said that file is vary for various devices, and I'd like to request for Onda V972 V1.
Apk doesn't work.
Can I just replace it without recovery, or is a stock recovery does the same in case of not having other one?
edit.
Here is how to compile proper wpa_supplicant file for your Android version:
http://forum.xda-developers.com/showpost.php?p=50717707&postcount=14
and how to paste it without recovery in root explorer/total commander:
http://forum.xda-developers.com/showpost.php?p=20334424&postcount=292
Is it possible to change the MAC address in our device??
And this is illegal isn't it?? ^^!
Sent from my GT-I9003 using Tapatalk 2
ghostcowboy said:
Is it possible to change the MAC address in our device??
And this is illegal isn't it?? ^^!
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
1. Yes, you can change MAC address (for example if you install CM or MIUI your MAC addresses will be changed). But I don't know how to do it (There are several applications but they don't work for some reasons)
2. I don't think that it's unlegal because it's easy to change it on PC, and the our device is already small PC.
It's unlegal to change IMEI.
i can help you and falex007 lol dude mac address is hardware inbuilt in our phone no firmware can change it lol
@ghostcowboy
could u please be more specific why u want to change ur mac ? and most importand how are u connected to the internet ? wifi router ? or dsl+wifi router ?
simmer14 said:
i can help you and falex007 lol dude mac address is hardware inbuilt in our phone no firmware can change it lol
@ghostcowboy
could u please be more specific why u want to change ur mac ? and most importand how are u connected to the internet ? wifi router ? or dsl+wifi router ?
Click to expand...
Click to collapse
hi, after flash the CM9, the MAC address is changed.
i having it now. i found out cause my router did not register my Hp for wifi.
and my router is set to mac filtering.
chongns said:
hi, after flash the CM9, the MAC address is changed.
i having it now. i found out cause my router did not register my Hp for wifi.
and my router is set to mac filtering.
Click to expand...
Click to collapse
what the heck is this ? my mac address is not changed..
in order to connect to the internet u need to do the following..
btw indian isp's are **** ! specially hfcl mother ****ers don't release my mac address..
do this
when ur connected with ur wifi
click on the connection name and see what ip is assigned to you..
it wil be 192.168.1.x
now open ipv4 settings of ur pc/lappy/notebook
and fill in ip settings
in ip address u fill the ip address assigned to ur device subnet mask is automatic.
default gateway
192.168.1.1
leave dns as it is or u can use google dns..
and press ok windows will show u that it's conflick with two ip's blah....
then ur network icon on pc will show an exclamation mark on it !
and now u can use wifi on ur phone...
need any help just reply here...
if still you do not understand then please wait i'l make a tutorial with screens tonight...
peace...
simmer14 said:
i can help you and falex007 lol dude mac address is hardware inbuilt in our phone no firmware can change it lol
@ghostcowboy
could u please be more specific why u want to change ur mac ? and most importand how are u connected to the internet ? wifi router ? or dsl+wifi router ?
Click to expand...
Click to collapse
LOL! Do you know that MAC can be changed very easy? look this and here Unfortunatelly those scripts doesn't work on our device
Also when you flash CM7/MIUI/CM9/MIUI2 the MAC became 08:00:28:12:03:58 (yes 1 MAC for every owner's of i9003 that flashed those ROMs). This happens because Samsung put the same MAC into hardware and change it manually in their stock ROMs.
BTW, if you flash back the stock ROM, the MAC address will return to Samsung one
PS: If you don't know the subject don't try to teach somebody: he can know more than you.
simmer14 said:
i can help you and falex007 lol dude mac address is hardware inbuilt in our phone no firmware can change it lol
@ghostcowboy
could u please be more specific why u want to change ur mac ? and most importand how are u connected to the internet ? wifi router ? or dsl+wifi router ?
Click to expand...
Click to collapse
Well, a cafe store near my house open wifi for free, but somehow, i couldn't connect to it, maybe they block the recent MAC address that connect.
I saw in busybox iplink tiwlan0 has the MAC address, maybe it related to something?? :->
Sent from my GT-I9003 using Tapatalk 2
ghostcowboy said:
Well, a cafe store near my house open wifi for free, but somehow, i couldn't connect to it, maybe they block the recent MAC address that connect.
I saw in busybox iplink tiwlan0 has the MAC address, maybe it related to something?? :->
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
I know only 2 types of cafe WiFi policy:
1. WiFi under the password: The device can't receive IP address at all. And the customer should ask the password from waiter.
2. Free WiFi: The device can register with WiFi network and can get IP address. But all http requests are redirected to special page where customer should put the password and click button (or there is just button without passphrase).
Also I don't think your MAC is blocked
BTW try to change the MAC with the following command:
su
busybox ifconfig tiwlan0 hw ether 00:11:22:33:44:55
falex007 said:
I know only 2 types of cafe WiFi policy:
1. WiFi under the password: The device can't receive IP address at all. And the customer should ask the password from waiter.
2. Free WiFi: The device can register with WiFi network and can get IP address. But all http requests are redirected to special page where customer should put the password and click button (or there is just button without passphrase).
Also I don't think your MAC is blocked
BTW try to change the MAC with the following command:
su
busybox ifconfig tiwlan0 hw ether 00:11:22:33:44:55
Click to expand...
Click to collapse
Yup, the first Wi-Fi policy is the same, but the 2 isn't.This Wi-Fi is popular in many cafes in my country, guest just have to obtain the IP address and doesn't redirect to another page.
I tried your following command but is said command not found after the last command (or i did the wrong way ^^! )
p/s: sorry for the bad English =]]
Sent from my GT-I9003 using Tapatalk 2
falex007 said:
LOL! Do you know that MAC can be changed very easy? look this and here Unfortunatelly those scripts doesn't work on our device
Also when you flash CM7/MIUI/CM9/MIUI2 the MAC became 08:00:28:12:03:58 (yes 1 MAC for every owner's of i9003 that flashed those ROMs). This happens because Samsung put the same MAC into hardware and change it manually in their stock ROMs.
BTW, if you flash back the stock ROM, the MAC address will return to Samsung one
PS: If you don't know the subject don't try to teach somebody: he can know more than you.
Click to expand...
Click to collapse
yeah you are right on my
any how can we simulate the Samsung stock rom way to add in our Mac?
Sent from my GT-I9003 using Tapatalk 2
I am here again with a problem, sorry. Please read this fully !
I have a lenovo laptop and a PC, i dont use laptop at all, but i tried to Start a wifi hotspot using Connecity....but i am not able to start a hotspot as it says NO AP MODE SUPPORTED (http://imgur.com/Bcwgl)
Note; i have enabled my wifi but yet it say, please enable, my wifi card is Intel Pro Wireless 3945ABG.
I downloaded the older version and installed, but somehow i can manage to start a hotspot with it, but it also say the above said error,
but it will start hotspot atleast.
There are only 2 Secutiry mode here and all are AD-HOC, one is Open another is WEP.
my mobile is not detecting the hotspot even if created....what is the solution for this...
i searched and got a info (http://forum.xda-developers.com/showthread.php?t=1115610)
there they told to paste a file...but when i open rootexplore it says this error;
http://imgur.com/zIjbe
What can i do now.
my phone is rooted.
connectify say my wifi card is abandoned, new version will not start hotspot, but old version it say NO AP MODE SELECTED, but it will start the hotspot.
Connectify support; http://support.connectify.me/entrie...at-are-known-to-be-compatible-with-connectify
there its written my wifi card is abandoned.
I cant afford to buy a router or new wifi modem, plz help with this.
You have the answer in your OP itself. Check this out:
nectify can work in Ad-Hoc mode with just about any Wi-Fi device on Windows 7, Vista, or XP.
However, to run in Access Point mode, you must be running Windows 7, and you must have a Windows 7 certified network device driver for your Wi-Fi device. You have this device driver if you own any Windows 7 logo certified Wi-Fi device (laptop, dongle, card, etc.). However, many older devices have also been updated with Windows 7 certified drivers.
Click to expand...
Click to collapse
And this:
The following are known "abandoned" devices, believed to lack certified Windows 7 drivers from their manufacturers. They could of course be updated at any time.
Click to expand...
Click to collapse
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.
Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......
'cooleagle' said:
You have the answer in your OP itself. Check this out:
And this:
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.
Click to expand...
Click to collapse
bhargav143 said:
Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......
Click to expand...
Click to collapse
Guyssssssssss.....i found a solution....
here it is...
http://forum.xda-developers.com/showthread.php?t=1115610
But i am using Old Connectify, as new version doent allow me to start hotspot, it say no ap mode supported...
Even the old version say that, but it allow me to create the hotspot.
I have updated the drive @cooleagle
Now i am using this setting AD-HOC WEP.
not open
But thanks for trying to help me
Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR
selva.simple said:
Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR
Click to expand...
Click to collapse
oh is it, however i have took a backup of original file...
can u give the link of that app ??? will that work without rooting..
chandrus1983 said:
can u give the link of that app ??? will that work without rooting..
Click to expand...
Click to collapse
WiFi Ad Hoc Enabler
It will work only in rooted devices. Because Andorid cannot detech Adhoc WiFi in general. Only a rooted device with the wpa_supplicant file change can do that. Since its a system file, rooting is must
We're sorry, the requested URL was not found on this server.
anyways, i have did some patch n its working now
not connecting in my SGS 2
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds
kalaikvanan said:
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds
Click to expand...
Click to collapse
Using ICS or GB ???? Rooted ??