Database Info

i9003 wifi problem

I have a big problem with wifi connection... it's very slow to connect and often don't work...
there is a solution... some system file that i can replace (copyng fron i9000).
My firmware is KB1.

Absolutely no problem with Wifi. whether on DDKB2 or XXKB3. May be check your wifi encryption mode.

i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??

scheccia said:
i change wep in wap/wap2-psk all my wifi encryption mode.
I try to update to xxbk3? You think that solve the problem??
Click to expand...
Click to collapse
In XXKB3 a lot of bugs was solved. I think you should try it.
Sent from my GT-I9003

im having wifi issues too!
im using kb2 and i always disconnects in our wifi...
other deices like our laptop doesn't disconnects, only my galaxy sl.

Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...

Nightwish sgsl said:
Please help me,i am a new i9003 user.I can't connect to internet via my operator.how to activate internet? i am noob( write step by step please.And i need to root the phone for installing xxkb3? on my i9003 xxkb1...
Click to expand...
Click to collapse
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.

thanks very much...

Wifi driver problem
I have DDkb2 firmware, whenever i try wifi on i get wifi related in logcat after 5 seconds as per default wifi supplicant scan interval time , i try to change this interval time by modifying build prop file , but it can not change, wifi running good but write error -- wpa_driver_tista_rssidata error.

I have flashed my phone to XXKB 3 but noting happens.....
my phone can't detect any wifi connections, while other nokia phones can

DDKF1 WiFi Issue
Guys, I updated to DDKF1 (recently released for India). And the WiFi just not working! Same configuration/credentials had worked on earlier version
Anyone who have had same problem; please help!

I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.

Flash to a more stable firmware like kb3 or kph.
Sent from my GT-I9003 using XDA App

trip007in said:
I use WEP encryption,
64bit encryption strength,
network authentication: open
The most important part, specify your MAC address in Wireless - Mac filter of your modem/ router and select allow.
You can check your MAC address for phone by browsing to Menu> About phone> Status>WI-Fi MAC address.
Restart your modem and scan wifi from phone when you see SSID select it and enter the 64 bit assigned key.
Thats all. All the best.
Click to expand...
Click to collapse
Trip, do not use WEP encryption in this day and age, one can crack it with widely available tools in mere seconds. I'm using WPA2-PSK with AES encryption (D-Link DIR-655) on my phone (XXKPH firmware) just fine. If there's a problem it might be one or combinations of the following:
. Firmware issue
. Incompatibilities between wireless access point and your phone

19crytek88 said:
I'm from India using SGSL , after recent update I have problem while connecting my phone to wifi router . Before update (in july 2011) it was working fine . Can anyone help me in fixing the issue.
Click to expand...
Click to collapse
What firmware did you flash? I have some problems with the Gingerbread versions of Android. If you flashed XXKPH or JPKP5 try to connect to your router and ping your router ip and some external ip (like google DNS 8.8.8.8). If your router pings well and you have about 70÷80% lost packets while pinging external IP. you have the same problem as mine. To solve it you can:
1. flash Froyo
2. change your WiFi router (I've tested 3 routers and I have problems only with 1)

I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd

ybyb said:
I am on ddkf1 and have this problem from starting. However it is better than ddkb2.
In my room wifi in sl works at will as it will connect/not connect/disconnect at it's discretion. And my laptop n other nokia phone works without any issue.
Should I update to xxkb3/kph or show it at the service centre.
Please suggest as it's driving me crazy now
--
GT-i9003 Tapatalk'd
Click to expand...
Click to collapse
Don't update id you want to sure it to three service center. Also, try nagging the phone forget the wi fi connection and set the password again. This worked for me!
Sent from my GT-I9100 using xda premium app

Reverse usb tethering(sharing internet connection on ur pc to i9003) beta 3

I found this helpful information to share with you
This guide will only work if you have rooted your device and with a Windows PC. We will not be liable for any damages arising from your use of this guide. Use the presented information at your own risk.
Remember that the tool is still beta software, so expect a lot of kinks and bugs. You can surf using Google Chrome, Firefox, Opera, or Dolphin Browser,GOOGLE PLAY MARKET although Google Chrome complains of not having an Internet connection even though it works. Ping and low-level ICMP packets don’t seem to work either.
Requirements
A rooted Android phone
Desktop or laptop computer running Windows
Working broadband Internet connection on the desktop or laptop
Android Software Development Kit (SDK) installed on the desktop or laptop (optional but recommended)
Instructions
1) Download the reverse tethering tools from here http://forum.xda-developers.com/attachment.php?attachmentid=829285&d=1324833033 and save the file to your computer. The ZIP file contains AndroidTool.exe (Android USB Tunnel tool for your Windows machine), ADB, and the Android APK (Beta Android USB Tunnel tool for your Android phone).
2) Extract the ZIP file to a folder on your computer.
Enable USB debugging on your phone by going to Settings > Applications > Development > USB Debugging.
3) Go to the folder where you extracted the ZIP file’s contents.
Run AndroidTool.exe.
Connect your phone to your PC using a USB cable.
In the Android USB Tunnel window, click on the Refresh Devices button.
From the list on the right of the detected devices, select a Domain Name Server (DNS) to use.
4) Click the Show Android Interface button. This will install the app and other needed binaries to your phone.
If the Superuser app on your phone asks whether to allow “USB Tunnel,” choose to allow the app. If the process crashes after receiving Superuser rights, close the Android USB Tunnel Windows application and repeat the procedure from the start.
5) Click on the Connect button on the Android USB Tunnel window on your computer.
6) Again, if the Superuser app on your phone asks, choose to allow “USB Tunnel.”
Congratulations! You have successfully reverse-tethered your Android phone to your PC.

Damn man this is cool.

Yeah ... it's cool ... but why I can't download files? I fail download file apk from market and other site. Bug?

wtf :|
threadjacking :|
http://forum.xda-developers.com/showthread.php?t=1371345
Click to expand...
Click to collapse

I made this thread just to help others,which i found on the net...and it is not my creation...LoL...

U should give the original developer a credit on ur thread at least..

Its an opensource so finding the exact developer is impossible for each version...And i dont have benefits in posting this thread...............................................

Reverse USB Tether
Yeah it works fine , having been using it since a few weeks.
But I need Reverse Wifi Tether.
I believe it was possible to enable AD Hoc for Wifi connections for Froyo a few months back.If you have any way to get it working for this device , Pls share it , would very much appreciate it.

When i press connect it will connect but after a couple secs the app force closes .Why is it happenning plz send me the FIX .
God Thanks for your work.

i hav been using this for a month...there is no problem arised from my side

tu55h4r said:
Yeah it works fine , having been using it since a few weeks.
But I need Reverse Wifi Tether.
I believe it was possible to enable AD Hoc for Wifi connections for Froyo a few months back.If you have any way to get it working for this device , Pls share it , would very much appreciate it.
Click to expand...
Click to collapse
you should try connectifity (windows 7) to sharing internet connection via wifi

any new upgrades?on stock firmware with root the game don't see the connection fot the download of the files :/

currently this release supports browsing through android
web browser oly

but with the ics rom on my i9003 i could download sd files for the games :/

Fabiox08 said:
but with the ics rom on my i9003 i could download sd files for the games :/
Click to expand...
Click to collapse
is that possible ?

sharp87 said:
currently this release supports browsing through android
web browser oly
Click to expand...
Click to collapse
nope.
Also can play youtube video and play game online such little empire and paradise island. And can download sdfiles to but it depend your modem connection

iamno3 said:
nope.
Also can play youtube video and play game online such little empire and paradise island. And can download sdfiles to but it depend your modem connection
Click to expand...
Click to collapse
ya i came to know that yesterday oly

My galaxy sl (i9003) problem
My galaxy sl (i9003) not listed when i press refresh
i have installed samsung kies and android sdk kit

fandroid7 said:
My galaxy sl (i9003) not listed when i press refresh
i have installed samsung kies and android sdk kit
Click to expand...
Click to collapse
may be u should be in usb debugging and mass storage mode
I9003 powered by MIUI V8.5

tu55h4r said:
Yeah it works fine , having been using it since a few weeks.
But I need Reverse Wifi Tether.
I believe it was possible to enable AD Hoc for Wifi connections for Froyo a few months back.If you have any way to get it working for this device , Pls share it , would very much appreciate it.
Click to expand...
Click to collapse
use connectify.

[ Solved ] Working 100% - Enable WiFi ad-Hoc Network for both ICS / GB -htc Sensation

[ Solved ] Working 100% - Enable WiFi ad-Hoc Networking for Both ICS and GB for htc Sensation
For GB , this Patch will enable ad-hoc 100% steady connection for both ( WEP and open Networks ) , Also Hotspot WPA2-PSK is still able to connect
For ICS , the APK will enable ad-hoc 100% steady connection with Full WiFi Signal for both ( WEP and open Networks ) , and for Hotspot WPA2-PSK use through regular wifi menu
General
Android does not show this Ad-hoc networks ( it Finds them in the search , but filters them out of the shown results ) , this patch prevent that filtering and shows those ad-hoc networks
There are two types of WiFi Networks :
Infrastructure ( Hotspot ) WPA,WPA2-PSK which is the most secured connection , usually routers broadcast this
Ad-hoc it is either WEP or open network which is less security , usually issued through a laptop connected to a DSL line to broadcast a temporary WiFi connection
DISCLAIMER
I am not responsible if flashing this Mod results in bricking your phone
for Rooted devices​
ad-Hoc Networking for GB
Download Link
See attached Patch Ad-hoc Sensation-Ad-hoc.zip ( Full Credit and thanks to leeDroid )
ZT-180 Adhoc Switcher APK can also work with GB , But i prefer the permanent solution of the above Patch for GB
Apply the Patch
it is always good to do a Backup for your data , Or Just Backup the original file " wpa_supplicant " located in System\bin .
to restore the original file " wpa_supplicant " any time :
just open the Patch in a winrar window and navigate to System\bin and over-right the one in the Patch with the original ( you can get the original from your Rom zip ) . apply the modified Patch from recovery and you are back to the original
if you use Root Explorer to restore the original file ,make sure to set the correct permissions and ownership values
Clear Dalvik cache , and install the Patch from recovery as usual
ad-Hoc Networking for ICS
it is always good to do a NAND Backup for your Rom and data
there is an APK named " ZT-180 Adhoc Switcher " which i geuss is not intended for Sensation but can support additional devices in the try Mode , this APK has two modes
infrastructure mode infrastructure mode.jpg ( will not be used , for Hotspot WPA2-PSK use regular wifi menu )
and " Just to try " ad-hoc mode for non supported devices Just to try ad-hoc mode.jpg that we interested in
the " Just to try " ad-hoc mode worked fine with Sensation
it connects fast , very steady connection with full Wifi Signal and a fast WiFi Data transfer , Ad-hoc it is working for both WEP or open network , Please note that some firewalls could prevent you from connecting even after adjusting its settings
Ad-hoc ( open Network ) :
open network connection doesn't require a Password ,
to modify either SSID name or WEP password , go to setting while you are in infrastructure mode and modify or clear the name in SSID then just switch back to Just to try mode and enable WiFi
if you clear ( remove ) the default name in SSID , this lets the device find and connect automatically to any open ad-hoc you establish from your laptop for example with any name of your choice ( on condition that your ad-hoc connection should be the only available ad-hoc connection in range ) ,
if you leave the default name in SSID "Android tether " as it is , it will only look for a connection with the name "Android tether " that is issued from your laptop and it will not detect any ad-hoc connection with any other name
if there is more than one open network in range that can be seen by the APK then
tip 1 : name the connction in your laptop same as in device SSID ( i.e android tether )
this is because if there is more than one open ad-hoc network and you left the SSID name empty , you can not control which connection the APK will choose to connect to
tip 2 : or use Ad-hoc ( WEP Network )
Ad-hoc ( WEP Network ) :
if you want to use WEP connection , go to setting while you are in infrastructure mode then enter SSID name and Password then switch back to Just to try and enable wifi WEP Password.jpg
the name of the connection should be the same name of the connection you started on your laptop for example
there is a complete help for the APK when you press the thin line under setting
Superuser.APK
if you are using the normal Super user APK opens normal , But if you are using the New SuperSU APK there will be a delay of maybe 5 sec for starting or executing Commands
please read this first #70 , Please note that this APK is not fully compatible with sensation although it worked fine with me
there is another APK ( try it if you like to ) named " WiFi AD HOC enabler " which doesn't really work good ( very weak signal and disconnects frequently ) , or at least this is what i experienced
Connectify Pro
there is a small yet powerful PC Software Called Connectify Pro ( i can't do without it ) that does three things :
it is for windows users
Acts like an actual hardware Router ( Not software networking )
toggle wifi with a single click for either ad-hoc or hotspot ( can start the same ad-hoc connection after reboot )
automatically does all complicated configurations for all types of network to fit with your firewall and windows , also share and transfer files among other options
Press the thanks Button for this Post

There is an application similar to connectify, hostapd for ubuntu which I use all the time . But both the application ( connectify and hostapd is hardware depended . If your wifi Card supports infrastructure mode or master mode , then only they will work. ) So this work around will help those users.
Thanks for your post dear..

Nit worked to me with ICS ,

It works!!!
I'm using HyperNonSense-v2.4
Thank you!!!

Is wifi hotspot bit working for some? I'm confused.
Sent from my HTC Sensation using Tapatalk

Please delete... googling got me

blackchad said:
i literally cannot figure this out... the instructions are really vague. "install the patch as usual from recovery" what is usual? you dont say. i backed up the wpa file and just used root explorer to overwrite it and it instantly broke my wifi. i restored the original so it came back fine but i dont know how to install patch from recovery as usual. obviously the APK says i dont have all of the files and must close. please help. running ICS viperrom 1.01
Click to expand...
Click to collapse
It means boot into recovery and flash it as you would a Rom
Sent from my HTC Sensation 4G using xda app-developers app

i feel very retarded... thank you very much

blackchad said:
i feel very retarded... thank you very much
Click to expand...
Click to collapse
No problem, mate.
Sent from my HTC Sensation 4G using xda app-developers app

ok, after reading the post for the 10th time i guess im not supposed to apply the patch since im on ICS? well, i restored completely to before i tried to get adhoc working and just installed the APK and it still didnt work. said i didnt have all the files and it must close. the link to the APK in the play store doesnt work because sensation isnt supported and i just had to find it online. Could it maybe be the APK that im using? Does anyone have a working one they could send to me or any ideas to a solution?

It's not work with the latest Sense 4 build (HTC Ville C2 latest RUU (1.11.401.110) Android 4.0.3 ICS). So can you tell me how did you do with the wpa_supplicant file please? I want to modify it myself.

is it only working for HTC OR any GB ROM ?
Thanks

what are the specific steps in applying the patch?
whats needed? and steps?
thanks

Is it just depends on replacing wpa_supplicant file, or something more?
Because author of this apk said that file is vary for various devices, and I'd like to request for Onda V972 V1.
Apk doesn't work.
Can I just replace it without recovery, or is a stock recovery does the same in case of not having other one?
edit.
Here is how to compile proper wpa_supplicant file for your Android version:
http://forum.xda-developers.com/showpost.php?p=50717707&postcount=14
and how to paste it without recovery in root explorer/total commander:
http://forum.xda-developers.com/showpost.php?p=20334424&postcount=292

Not able to use Connectify !!! Someone please help me :(

I am here again with a problem, sorry. Please read this fully !
I have a lenovo laptop and a PC, i dont use laptop at all, but i tried to Start a wifi hotspot using Connecity....but i am not able to start a hotspot as it says NO AP MODE SUPPORTED (http://imgur.com/Bcwgl)
Note; i have enabled my wifi but yet it say, please enable, my wifi card is Intel Pro Wireless 3945ABG.
I downloaded the older version and installed, but somehow i can manage to start a hotspot with it, but it also say the above said error,
but it will start hotspot atleast.
There are only 2 Secutiry mode here and all are AD-HOC, one is Open another is WEP.
my mobile is not detecting the hotspot even if created....what is the solution for this...
i searched and got a info (http://forum.xda-developers.com/showthread.php?t=1115610)
there they told to paste a file...but when i open rootexplore it says this error;
http://imgur.com/zIjbe
What can i do now.
my phone is rooted.
connectify say my wifi card is abandoned, new version will not start hotspot, but old version it say NO AP MODE SELECTED, but it will start the hotspot.
Connectify support; http://support.connectify.me/entrie...at-are-known-to-be-compatible-with-connectify
there its written my wifi card is abandoned.
I cant afford to buy a router or new wifi modem, plz help with this.

You have the answer in your OP itself. Check this out:
nectify can work in Ad-Hoc mode with just about any Wi-Fi device on Windows 7, Vista, or XP.
However, to run in Access Point mode, you must be running Windows 7, and you must have a Windows 7 certified network device driver for your Wi-Fi device. You have this device driver if you own any Windows 7 logo certified Wi-Fi device (laptop, dongle, card, etc.). However, many older devices have also been updated with Windows 7 certified drivers.
Click to expand...
Click to collapse
And this:
The following are known "abandoned" devices, believed to lack certified Windows 7 drivers from their manufacturers. They could of course be updated at any time.
Click to expand...
Click to collapse
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.

Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......

'cooleagle' said:
You have the answer in your OP itself. Check this out:
And this:
Wait until & if Intel releases a Win 7 compatible driver for your card.
Check if they have already released an update for your card which you may not have installed.
Hope this helps.
Click to expand...
Click to collapse
bhargav143 said:
Adhoc does not work...
Not the...
Only.. The following
Will work...try configuring like this....
name
Password
select ur source...
Advanced..
Wpa2-psk
I think it will work with android..other settings don't work with android.. I had tested... Hope it helps....
Sent via XDA App....
SGR 2.3.6 Neo Rom with Voodoo Sound Enhancements.......
Click to expand...
Click to collapse
Guyssssssssss.....i found a solution....
here it is...
http://forum.xda-developers.com/showthread.php?t=1115610
But i am using Old Connectify, as new version doent allow me to start hotspot, it say no ap mode supported...
Even the old version say that, but it allow me to create the hotspot.
I have updated the drive @cooleagle
Now i am using this setting AD-HOC WEP.
not open
But thanks for trying to help me

Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR

selva.simple said:
Instead of replacing your wpa_Supplciant file manually, you can use wifi adhoc enabler app which will take a backup of your wpa_supplicant file and modify it so that our mobile will detect adhoc-wifi.
Im using Dell laptop, Windows Vista and adhoc wifi enabled using connectify and sharing that with my SGR
Click to expand...
Click to collapse
oh is it, however i have took a backup of original file...
can u give the link of that app ??? will that work without rooting..

chandrus1983 said:
can u give the link of that app ??? will that work without rooting..
Click to expand...
Click to collapse
WiFi Ad Hoc Enabler
It will work only in rooted devices. Because Andorid cannot detech Adhoc WiFi in general. Only a rooted device with the wpa_supplicant file change can do that. Since its a system file, rooting is must

We're sorry, the requested URL was not found on this server.
anyways, i have did some patch n its working now

not connecting in my SGS 2
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds

kalaikvanan said:
hi frds. connectify succesfully strted in my laptop. tht connectify wifi signal also showng in my mobile. when i connect it itz showng obtaining ip address. after tht nothing happeng, itz jus keep on repeatng the same. not at all connecting. help me frds
Click to expand...
Click to collapse
Using ICS or GB ???? Rooted ??

Share your mobile internet 2g , 3g to your computer !

Hey Guyz People Had Issue With The USB Tether And Wireless Tether On Q Mobile NOIR A2 Here How U Can Fix It :
1. Firstly Download PDA Net Client On Ur Computer In Which U Want The Internet To Be Shared http://pdanet.co/
2. Second Head To Play Store And Download The App https://play.google.com/store/apps/details?id=com.pdanet PDA + Foxfi Net
3. The Get Ur Self A Data Connection And Internet Package
4. Connect Ur Phone With Ur PC
5. Do Not Enable The USB Storage Since U Don't Need It For Sharing Ur Internet
6. Open PDA Net And Connect To Internet Via Ur Phone
Its All Done Here U Can Now Share Ur Internet But People Don't Expect Ur Internet To Be Fast Since Pakistan Has No 3G Service And The A2 Does Not Have 3G Band The Highest Band It Got Is 2.75 G That Is EDGE
Hope U Like My Post Dont Forget To Hit The Thanks Bar