Hello.
I am currently trying all versions of Android mentioned in this forum to try and find a stable and compatible version that i can run day to day. Unfortunately i have not yet found a combination that enables wi-fi. The ecliar version enables wi-fi however cannot connect to anything. I am currently using Myn Warm Donut loaded by NAND method. Everything working ok except wi-fi. I have tried both types of NBH files and have tried both methods following instructions contained in the foums. I have also updated with most fixes for wi-fi found in this forum and still not joy.
Does anyone have the same issue? Is this related only to a POLA200? Does anyone have a work around?
Kind Regards
AC
Did you use android update?
Yeah i used android update, before booting into the o/s. I fixed the permissions but nothing changed. Wi-fi will not enable at all. I only have internet access from my network providor.
Kind Regards
AC
Hello, I Know there are correct wifi usb dongles drivers in Tiamat Kernels, i have tried everything possible to get the Mobile Settings option in the Wireless setting of android with no luck, Can anybody point me to the correct procedures on how to do it? btw i have tried the methods of doing that on Acer and Asus and it didn't work, i had to flash new kernels to boot again in some cases. Thanks
Why those drivers are present but nobody want to write dialer script and instruction?
Launchpad kernel for Xoom!
Alright, Forget about Tiamat kernel, i have Team Tiamat Moray Rom on my Wifi only Xoom with the launchpad kernel from this post :
http://www.xoomforums.com/forum/lau...nel-launchpad-1-2-2-new-6-11-11-3-1-only.html
you will find in the addons (WWAN USB Addon) which is used on the launchpad to show the Mobile Menu and enable tethering as the kernel should have everything required, so why when i use it on the Xoom it doesn't work? BTW i have also disabled the Zero-CD option on the USB stick to make sure it reads as a modem when connected to usb port, i made sure that my 3g stick is compatible with the operation.
Its really interesting when i see 153 views and only one reply
You can try this http://forum.xda-developers.com/showthread.php?t=1118639
And I will try with CDMA modem I found one non-english article.
But just yesterday I got trouble with OTG connections, all devices are with error:
usb 2-1: new low speed USB device using tegra-ehci and address 6
usb 2-1: device not accepting address 6, error -71
hub 2-1: unable to enumerate device on port 1
It was working last night. Wtf? Do you know how to fix this? I tried to restart tablet with no luck, otg cable not working anymore.
Update 1: Nevermind, cable was broken. Fixed.
Update 2: I tried that method on link I gave you - zore result, reflashed.
P.S: Just tried your launchpad kernel - too bad that 3.1 only. I'm using Rogue now. By the way usb_wwan can be installed everywhere.
I found also this universal installer for Huawei modems attached below.
Dunno how to "dance" with this. After installing just nothing happend or I doing wrong.
thanks for you effort, OTG cables are horrible, most of the time when you get failures its caused by cables or adapters anyway,
i downloaded the attached archive and pushed all modules to my Xoom with MORAY Rom and Odachi Kernel, rebooted and nothing happened too no Mobile Settings menu, will keep trying and keep you posted
Actually I'm not sure if there should appear some menu. After this you have to see in dmesg you modem to be recognized like GSM converter but I don't. So it looks like option.ko isn't loaded. Maybe this file has to be in defferent place instead of /system/lib on Xoom? I also tried to put it in /system/lib/modules/ , also nothing happend after.
Maybe it works on older versions of ROMs? I'm using 3.2.2 stock rooted with rogue kernel + usb_wwan
Maybe, i have tried it with many roms, even the 3.1 but no luck, i think Team Tiamat would be the right ppl who would clarify everything to us, i have tried setting the kernel to launch all the modules on boot but nothing happened,we need somebody experienced in those things to help us out
Hmm... as you see there is nobody who want to help with this. Because they have 3G models or expencive portable hotspots and nobody need this.
Anyway. Did you try to put option.ko and usb_wwan.ko in system/library/modules folder and right after that set up "modules on boot"? Restart tablet, connect modem and see in dmesg. I don't have this option in my rom, so try to do that.
:s
I've tried placing the modules and loading them on boot, but it didn't work too, its not about money, actually i have 3G portable wifi router and my other android devices have the built-in wifi hotspot ,but its about doing the thing...its about the concept, why it's not working while we have everything in place, thats the weird thing, i think we will have to wait until somebody feels sorry for us then decide to help us! :s
Problem definitely in /system/build.prop it should be edited somehow, according to manual for A500 tablet.
Neolo said:
I found also this universal installer for Huawei modems attached below.
Dunno how to "dance" with this. After installing just nothing happend or I doing wrong.
Click to expand...
Click to collapse
hi, where to put this module pack? i mean how to install?
How to connect manually using Huawei 3G dongle:
You need:
- rooted xoom with Tiamat kernel (or any other which has usb_wwan.ko and option.ko attached)
- 3g dongle
1. Backup files from /etc/ppp in case when this solution don't work
2. Download attached zip and extract to /etc/ppp
3. edit /etc/ppp/gprs-connect-chat in line
Code:
'' AT+CGDCONT=1,"IP","internet"
replace 'internet' with APN name for your network
4. Now run terminal (Terminal Emulator) and type
Code:
su
stop ril-daemon
insmod /system/lib/modules/usb_wwan.ko
insmod /system/lib/modules/option.ko
pppd call gprs
Now you should have working connection (Xoom doesn't show this, but if you run browser it should work).
For me it works on Verizon Xoom with Huawei e1750, but i'm living in area where only edge is avaliable, so this is very slow connection - i need to check connection speed in other location this weekend.
For Xoom Wifi owners: this should also work for you, but with small change - after inserting modules you should check on dmesg which port(s) is using your dongle and change port number in first line of /etc/ppp/peers/gprs . It's probably /dev/ttyUSB0 but you must check.
Porzeczek said:
How to connect manually using Huawei 3G dongle:
You need:
- rooted xoom with Tiamat kernel (or any other which has usb_wwan.ko and option.ko attached)
- 3g dongle
1. Backup files from /etc/ppp in case when this solution don't work
2. Download attached zip and extract to /etc/ppp
3. edit /etc/ppp/gprs-connect-chat in line
Code:
'' AT+CGDCONT=1,"IP","internet"
replace 'internet' with APN name for your network
4. Now run terminal (Terminal Emulator) and type
Code:
su
stop ril-daemon
insmod /system/lib/modules/usb_wwan.ko
insmod /system/lib/modules/option.ko
pppd call gprs
Now you should have working connection (Xoom doesn't show this, but if you run browser it should work).
For me it works on Verizon Xoom with Huawei e1750, but i'm living in area where only edge is avaliable, so this is very slow connection - i need to check connection speed in other location this weekend.
For Xoom Wifi owners: this should also work for you, but with small change - after inserting modules you should check on dmesg which port(s) is using your dongle and change port number in first line of /etc/ppp/peers/gprs . It's probably /dev/ttyUSB0 but you must check.
Click to expand...
Click to collapse
bro,
how can we connect any other company's usb modem? it is same as huawei modem or new driver files to be downloaded?
raihankabir_1 said:
bro,
how can we connect any other company's usb modem? it is same as huawei modem or new driver files to be downloaded?
Click to expand...
Click to collapse
What modem you have?
Porzeczek said:
What modem you have?
Click to expand...
Click to collapse
i was successful with huawei 3g modem according to the tutorial. i have an wimax usb modem and i didnt find any tutorial related to wimax usb modem on xoom
raihankabir_1 said:
i was successful with huawei 3g modem according to the tutorial. i have an wimax usb modem and i didnt find any tutorial related to wimax usb modem on xoom
Click to expand...
Click to collapse
Ask google for linux support for this wimax modem. If it works on linux it also should work in android. And most of linux tutorials are saying which driver is needed.
I also have different modem need to use, because gprs is slow and expencive.
I have Cmotech U300 (Dual mode - WiMax + CDMA Rev.A) branded for Sprint. Have no idea where to get a driver for xoom.
Looks like my modem is working under Linux, http://jebus.nu/tech-corner/sprint-u300 Dut generally I have no idea how to make it for Xoom.
My Huawei is recognized well. I set APN name, but what about APN username and password. Where are setted?
Are there any updated ppp files for the xoom on jelly bean as it does not seem to work with my one....... Also try something called "ppp widget" which seems to be easier to do but still its not worked for me on my xoom...... HELP
Hi guys i have a problem with my IP address when i go to settings>about phone>status my IP address says unavailable ive tried switching my phone off but nothing works i think this is affecting my wifi as well because it also says settings not responding when i switch it on and when i use other applications to switch it on they fail when they are collectiing my wifi address someone please help me i miss WiFi:crying::crying:
Since you didn't post the device information (ie phone model) nor the router you use, it doesn't allow us forums users to give you the best options to troubleshoot the problem your having
Some generic options to try
1) try powercycling the router (linksys have a tendency of dropping Wifi connections)
2) check to see if the wifi toggle is on (the settings menu)
I have the same problem as well:
my phone specs:
Software version: L720VPUEMK2
Device model: SPH-L720
Android version: 4.4.2
A couple of days ago i had installed the newest update for the s4 and when it had finished installing both the bluetooth address and the ip address said unavailable and i am now unable to connect to any internet
colestole said:
I have the same problem as well:
my phone specs:
Software version: L720VPUEMK2
Device model: SPH-L720
Android version: 4.4.2
A couple of days ago i had installed the newest update for the s4 and when it had finished installing both the bluetooth address and the ip address said unavailable and i am now unable to connect to any internet
Click to expand...
Click to collapse
It looks like your efs has been missing.If you have a backup.Restore it.
Flash the modem separately may help too.
cshlcsh said:
It looks like your efs has been missing.If you have a backup.Restore it.
Flash the modem separately may help too.
Click to expand...
Click to collapse
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Vignesh Viswanathan said:
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Click to expand...
Click to collapse
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Awaiting for an response on the issue mentioned above, advise me what is the solution...
Looking forward to the precious help from you guys
Vignesh Viswanathan said:
Hi,
I am also facing this same problem (Bluetooth & IP address unavailable) since 2 days back and i tried to switch off & on my Samsung S4 (I-9500 GT).
The thing is that i have never manually backed up my phone or this EFS, so advice me a solution to overcome this problem.
Awaiting for an response on the issue mentioned above, advise me what is the solution...
Looking forward to the precious help from you guys
Click to expand...
Click to collapse
if you r having problem with efs file then try this.
1> you need to root your phone first. check out forums there are tons of tut's available.
2> goto this post and download efs professional zip.(you have to extract it)
3> enable usb debugging in developers mode and make sure you have all the usb/adb drivers installed on your phone.(install universal adb drivers that will work fine)
4> open efs professional.exe and connect your device.
5> now go to backups tab and select your device under device filter tab and then click backup. wait for backup to be complete.
6> now go to restore tab and under backup archives select one of the .tar.gz file I prefer (device)(although it doesn't matter) and hit resotre.
7> your device will reboot and you are done.
if you still have the problem
download root explorer and goto efs folder in root directory. then find this file - 'nv_data.bin.md5' and delete it and restart the phone.
if this helped then hit the thanks.
I felt this problem with my htc desire 826..
Can not share hot spot to others ..
Hi Sir,
I've also face same problem, my Bluetooth and IPv4 address is unavailable.
How can i make them available. I need your help sir. Thank you phone model SM-G530H
any fix for this issue on Moto g4 xt1625, No Mac Address no way to connect to Data connection or even the wifi.
TubbyStubby said:
if you r having problem with efs file then try this.
1> you need to root your phone first. check out forums there are tons of tut's available.
2> goto this post and download efs professional zip.(you have to extract it)
3> enable usb debugging in developers mode and make sure you have all the usb/adb drivers installed on your phone.(install universal adb drivers that will work fine)
4> open efs professional.exe and connect your device.
5> now go to backups tab and select your device under device filter tab and then click backup. wait for backup to be complete.
6> now go to restore tab and under backup archives select one of the .tar.gz file I prefer (device)(although it doesn't matter) and hit resotre.
7> your device will reboot and you are done.
if you still have the problem
download root explorer and goto efs folder in root directory. then find this file - 'nv_data.bin.md5' and delete it and restart the phone.
if this helped then hit the thanks.
Click to expand...
Click to collapse
Hi, i have the same problem, do i have to download efs professional zip on my pc?
my phone ivargo isnt showing any signal could i get help
My samsung j7 is not scanning any wifi. I hav already done factory reset also but no change... what can i do?
Mine is SM-J700H
Andeoid version 6.0.1
Pls my IP address and my Bluetooth address are displaying unavailable.someone told me to try going to settings/apps/Google play services/and force stop and restart it.but when I tried,the force stop button is unclear and unpressable.pls indeed u guys help on this.i wud be very grateful if you reply..
Hi @ all,
sorry if this is the wrong place to post, but as a new user I can not post a reply in a current discussion, where my problem belongs to.
Device: S3 mini (GT-I8190) with Version XXAMG4 and Kernel 3.0.31.1332988.
Device was flashed with openrecovery-twrp-2.6.3.0
Device is rooted with Super-SU1.3
BusyBox is installed
I try to connect to a windows share over two diffrent apps:
CifsManager v1.5
MountManager
target host is in same WLAN and - yes WLAN is on and operates fine ..
share works on my other windows and on my ubuntu without problems.
I have tried several mount methods and diffrent cifs.ko files to get a connection, but it don't work.
I always get message: No such device
Where can i get the right cifs.ko file for my phone? I've searched lot of sites, but for my kernel there
is nothing. Or do you have any other hint for me, why it would not connect?
Thanks a lot to all!
Chris
Hi guys, this is my first post on this forum, so I'm sorry if I'll do something wrong.
I bought a LG GPad V500 (standard version, not google experience edition) and i noticed that tha stock ROM was not so nice... I successfully installed clockworkmod and CyanogenMod 11. The ROM works fine, it's fast and i didn't find any bug. Just i can't understand how to setup USB thethering (aka reverse thethering).
When i start the server on my Windows 8 PC an app is installed on my tab (USB tunneling app). I accepted the super-user request and then I also installed the fake-wifi hack (included in reverse thethering package).
The problem is that, when I press Connect on my PC, the LOG shows no errors but I can't access Internet from the tab. USB Tnneling app shows "UDP connections: 0" and "TCP connections: 0" and the software on my PC says there isn't any download and upload speed. I reinstalled the apps many times and I replaced adb.exe (I founded this solution on Reverse Thethering official post on XDA, but it didn't work for me).
I googled the problem and I read many times that the kernel should be not able to run a USB thethering. I don't know if it could be true, i used the USB Thethering on CM 11 on my old TF300 (died 3 days ago :crying.
Do you know how to fix this problem? It's quite important for me because I can't use any wifi network at home and at work. Sorry for terrible English and thanks
P.S: is it possible, if needed, to change CM11 Kernel (flashing it using CWM)?