Related
I have tried my best to make it work but I am not able to figure-out what is wrong with it.
I am able to boot into CWM but it is not performing functions like backup,restore,mount,system,etc.
But you can download the attached zip place it in the root of your SD-CARD and flash it from recovery.
After you fla**** with stock recovery, it will automatically OPEN CWM recovery.
You can scroll with volume buttons and center button to select and power button to go back.
But after reboot it will when you press power+volume up+centre it will boot in stock samsung recovery.
After you flash it you can also use ROM MANAGER and press Reboot into Recovery to boot in CWM Recovery.
It will not hurt your phone but i am not responsible for any harm to your phone.
Any help is appreciated.
EDIT: My recovery is not working. Use this recovery by Skin1980: www.multiupload.com/IGKG2L5RAF
Why is this in the Questions and Answers section?
Because I want help in making it stable.
I am not a developer.
But.. Galaxy 5's recovery works(for me atleast) on Galaxy Y, so you might wanna have a look at its code, it can not mount though.. and it also is overwritten or something and everytime I use ROM manager to boot up n CWM it gets replaced again(same as u said in short).
P.S. 'Thanks' for trying.
still wait to finish.i vote you
I expect this was a long time, trying out many more of you, I voted you
install CMW recovery on Galaxy Y [ TESTED ]
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
ankit024 said:
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
Click to expand...
Click to collapse
give me some pic plz.
Hi,
This CWM recovery if for 2.3.5(i forgot the build no)? or 2.3.6(DKK4 which I have)?
can somebody post a normalboot.img of this?
many thanks!
im waiting for work n the stable one!! keep posting guyss!!!
great work.. waiting fr full working beta release
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
http://www.multiupload.com/48YV5Z4YLQ
Flash it with Odin.... in the PDA field
Report me ASAP
Skin1980 said:
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
http://www.multiupload.com/48YV5Z4YLQ
Flash it with Odin.... in the PDA field
Report me ASAP
Click to expand...
Click to collapse
does it works for all firmware?tell as more about it please
Skin1980 said:
I built a CWM based recovery for Galaxy_Y
this is for FW: S5360DXKK4
Flash it with Odin.... in the PDA field
Report me ASAP
Click to expand...
Click to collapse
failed in flashing progress
i think this because s5360 can't install one-package firmware
anyone try successful??
failed also, i am using cygwin to recompile it as .tar
but it still says the same thing..
i thought the one package is already solved there was a blog who made that post about flashing in one package.
ankit024 said:
you can install clockmod recovery very easy just you need is rooted gallaxy y.
From market download rom manager and serch for samsung galaxy mini
install it - will atje some time according to speed of net-
the click reboot into recovery and crack man you are into recovery.
for new cyanogen rom for GALAXY Y - www(.)romfory(.)blogspot(.)com
do click thankzzz....
Click to expand...
Click to collapse
Yeah but the backup and restore is not functional... It dont recognize /data between making backup so on the end it dont make md5 sum and thats al... unuseable recovery...
vndlsm said:
failed also, i am using cygwin to recompile it as .tar
but it still says the same thing..
i thought the one package is already solved there was a blog who made that post about flashing in one package.
Click to expand...
Click to collapse
unfortunately its not solved!its theoriticaly but it does not work!i wish someone could find a solution to one package flash!
If there's somebody that can do the tester please write to me... i haven't this phone but i'm pretty sure that i can solve this in few time
Inviato dal mio GT-I9100 usando Tapatalk
Skin1980 said:
If there's somebody that can do the tester please write to me... i haven't this phone but i'm pretty sure that i can solve this in few time
Inviato dal mio GT-I9100 usando Tapatalk
Click to expand...
Click to collapse
I have tried to flash it with ODIN but it failed then I made an update.zip package with your recovery but after flashing it soft-bricked my phone.
I think something is wrong with the recovery you should fix it.
I can test these recoveries for you but since I am going out for holiday for 10 days sometime I may not test it instantly.
Thanks for your participation in development for this phone.
Based on Latest firmware version : PDA:LI8 / PHONE:LI2 / CSC:LI6 (TGY)
Just like ausdim's deodex package, this is not a full ROM, it will install and replace only your system/app and system/framework folders so please make sure you are on the above stated firmware before continuing.
Tested on my ZHALI8 based GT-I9305 (TGY Hong Kong unit).
You need to have CWM Recovery installed.
Link:
http://d-h.st/users/kazuni/?fld_id=6292#files
Shoutout to ausdim's zipalign and deodex script, props bro!
Hi is that able to use on my ZHALI7 (HK Device) ?
Yes, it is.
Sent from my GT-I9305
kazuni said:
Yes, it is.
Sent from my GT-I9305
Click to expand...
Click to collapse
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
asiafalcon said:
hi,dude,i bought 9305 in hk,based on i9305zhali8,but i can not rooted,can you kindly tell me how to root it?i tried many time,also inculed this method:http://forum.xda-developers.com/showthread.php?t=1914394
thx a lot
Click to expand...
Click to collapse
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
kazuni said:
That's the method I used. make sure after first odin flash, you let your device reboot twice before u apply cwm tar file.
Click to expand...
Click to collapse
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
bonglau0429 said:
Sorry one more question HK brother,~
if i use this package on ZHALI7, will it wipe my existing data ?
also if i use this package, will it upgrade from ZHALI7 to 8?
Click to expand...
Click to collapse
You can use this package on ZHALI7, however it will not update your modem/csc/boot to ZHALI8. I don't think it's a major problem though, as it is just a software package modification and it should work properly.
asiafalcon said:
but after cwm flash,i rebooted my deviced,it still 3e mode....not cwm ....what should i do?
英语差啊，说的好累。。兄弟你在香港，应该懂中文吧？
我按照之前给的连接的办法，在odin界面刷入cwm包，之后重启机器，结果进入的还是3e的界面。之前机器到手的时候是li7，后来连接wifi之后，强制升级了。
Click to expand...
Click to collapse
Please send me private message, thanks
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
slotmachine88 said:
Same here. Same as Asiafalcon Talking about. After flash the recovery.md5. Then reboot into the recovery mode, found that it still show me 3e.
I haven't give up so I tried the way from the galaxy note 2 topic from this forum, used the recovery and root file which is for the note 2. I though it may be the same thing since both of them are also using 4.1.1. Unfortunately, I've failed flasing and popup the yellow triangle on my i9305.
Finally, I tried to using the i9305 root/recovery file to flash once again on it and it can boot up well. At the moment, I found my phone can not detect my micro sim even if I've the newone. Does any one know how to fix this? Do I need to re-flash the original rom (with re-partition from odin) once again?
Click to expand...
Click to collapse
I'll state carefully and again, do not ever re-partition the device UNLESS 1) you have a backup EFS copy and 2) you are sure that the partition PIT file you are using is for i9305/T AND your specific model (16/32/64 gb), and nothing else.
I'll also re-elaborate my steps - after you have first flashed the Odin rom , make sure you install the CWM through odin AFTER at least two reboots. 3e will be gone once you do so.
Re: Kazumi
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
slotmachine88 said:
Re: Kazumni
So the above step could fix my currently problem? Can I get back the 3G signal and detect my micro sim as normal?
Click to expand...
Click to collapse
should be, unless the device's NV data area (IMEI) is corrupted. Otherwise, I would suggest you to reflash the official rom first and check whether your device has a signal or not.
Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
aggokeh said:
Hello there! I just flashed ArchiDroid V2.3.4 in my Galaxy S III. When flashing ended I selected reboot now. But my phone only reboots in recovery mode (phiilz touch 4 CWM Base Version: 6.0.3.1). I tried to reboot my phone from the recovery mode but still the same problem. I tried to remove the battery and try again but still the same problem. Can you give me a solution to this cause I don't know what to do... Thanks!
Click to expand...
Click to collapse
did you do a full flash? i would try flashing the rom again.
Trozzul said:
did you do a full flash? i would try flashing the rom again.
Click to expand...
Click to collapse
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
try flashing custom kernel or stock kernel for ur fon...hope this helps...
aggokeh said:
yes i think i did a full flash.. i just followed the instruction given.. i flashed the rom again several times but i have the same problem. whenever i open the phone it's the recovery mode and not the casual start.
Click to expand...
Click to collapse
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Trozzul said:
maybe try another rom for now to at least get somewhere, is the rom your flashing a 4.4.2 rom?
Click to expand...
Click to collapse
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
aggokeh said:
its 4.4.. i will try to flash a custom rom and see what happens but i don't know if this is rom's fault or PhilZ Touch Recovery's fault
Click to expand...
Click to collapse
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
the CWM version of this particular recovery is 6.0.3.1.. Is this a problem? and if it's recovery's problem what can i do about it? if i flash a stock rom the recovery will not be erased.
.
Trozzul said:
i wanna say its the recovery because i think 4.4 roms are only flashing on CWM 6.0.4.3 i dont know what other recovery's require.
Click to expand...
Click to collapse
and this particular recovery is recommended in the instruction of the ROM
aggokeh said:
and this particular recovery is recommended in the instruction of the ROM
Click to expand...
Click to collapse
hmmm well i dont know what to say to that but thats what i have heard with kit kat roms, i have looked on CWMs website and almost all of the galaxys s3s (discluding the s3 mini and international i think) have 6.0.4.X so i would try the specific one for you on Rom manager when you get a rom Working.
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Razor0 said:
I Just installed HellKat 4.4 on my galaxy S3.
The only way this would work is to get my CWM to 6.0.4 just like Trozzul suggested.
The way I did it is to find ODIN pro/lite (MobileODINLite-v4.00.apk)
Then use that to install the CWM.img.
The HellKat 4.4 would not install with CWM 6.0.1
Hope this helps
Click to expand...
Click to collapse
can he not just Flash a CWM.img in his recovery? or use rom manager to flash over it?
I have the Galaxy Tab 2 10.1 Wifi & rf Model
First time "rooting a device". And now I'm trying to install a rom with no success PLEASE HELP ME
First, i rooted the tablet with CF-Auto-Root from ChainFire http://forum.xda-developers.com/showthread.php?t=1957165
Everything went great. I checked with root checker and i got root access.
Later I installed via Odin GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5 http://www.androidfilehost.com/?w=files&flid=14129 from Android-Andi
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the
cm-11-20140426-UNOFFICIAL-p5110.zip http://www.androidfilehost.com/?w=files&flid=14141 that I had on the sd card
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
jazzvel said:
I have the Galaxy Tab 2 10.1 Wifi & rf Model
First time "rooting a device". And now I'm trying to install a rom with no success PLEASE HELP ME
First, i rooted the tablet with CF-Auto-Root from ChainFire http://forum.xda-developers.com/showthread.php?t=1957165
Everything went great. I checked with root checker and i got root access.
Later I installed via Odin GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5 from Android-Andi
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the cm-11-20140426-UNOFFICIAL-p5100.zip that i had on the sd card
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
Click to expand...
Click to collapse
Looks like you flashed a 5100 Rom on a 5110 or 5113 tab. Check your model number carefully before proceeding and thenyou need to use the ROM that is specific to your tab model. If you have a model GTP5100 then only 5100 Rom. If you have 5110 or 5113 model then you may use a 5110 or 5113 Rom. Those 2 (5110/5113) are basically interchangeable. Be careful and make sure you are using correct version as you may brick your device if not.
CSP III said:
Looks like you flashed a 5100 Rom on a 5110 or 5113 tab. Check your model number carefully before proceeding and thenyou need to use the ROM that is specific to your tab model. If you have a model GTP5100 then only 5100 Rom. If you have 5110 or 5113 model then you may use a 5110 or 5113 Rom. Those 2 (5110/5113) are basically interchangeable. Be careful and make sure you are using correct version as you may brick your device if not.
Click to expand...
Click to collapse
Oh my bad, there was a typo on my post the name of the file I fixed it and added the links to the places where i got the files.
So yeah, I used the correct one the 5110 that is supposed to work with the 5113.
And well, the result is that I have a rooted tablet with the GT-P5110_PhilZ-Touch-Recovery_6.26.1 But Can't install the CM 11...
Any Help will be much appreciated
jazzvel said:
Oh my bad, there was a typo on my post the name of the file I fixed it and added the links to the places where i got the files.
So yeah, I used the correct one the 5110 that is supposed to work with the 5113.
And well, the result is that I have a rooted tablet with the GT-P5110_PhilZ-Touch-Recovery_6.26.1 But Can't install the CM 11...
Any Help will be much appreciated
Click to expand...
Click to collapse
Try one of Android Andi's CM11 Unofficial builds.http://forum.xda-developers.com/showthread.php?t=2571498 Personally, I never have luck with the nightlies.
CSP III said:
Try one of Android Andi's CM11 Unofficial builds.http://forum.xda-developers.com/showthread.php?t=2571498 Personally, I never have luck with the nightlies.
Click to expand...
Click to collapse
and that is what I tried
Then i started on recovery mode, wipe data factory reset, wipe cache, wipe dalvic cache and tried to install the
cm-11-20140426-UNOFFICIAL-p5110.zip
Click to expand...
Click to collapse
if I have the Philz-touch recovery, if I flash another recovery via Oidn will philz-touch recovery will be replaced? Can I do that without messing my tablet?
And then try to install the unofficial cm 11 again?
jazzvel said:
But i get this error...
This package is for "p5110, gt-5110,p5113,GT-P5113, espresso10wifi,espresso10wifixx" devices"; this is a espresso10rf".
Should i be looking for another version of the ROM? Or what am I doing wrong?
Can't figure it out.
Thanks in advance!
Click to expand...
Click to collapse
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Android-Andi said:
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Click to expand...
Click to collapse
Thanks for your answer.
So I can just flash the correct one and it will overwrite the existing one? Or do i have to uninstall first?
No Mirrors
Android-Andi said:
You flashed P5100 Recovery . I just checked my files, no derp on my side
Re-Download the correct recovery for you device and flash it using Odin.
Now you´ll be able to flash the right rom for your device.
Click to expand...
Click to collapse
I get no mirrors for this download. But I do with any other downloads you have there.
GT-P5110_PhilZ-Touch-Recovery_6.26.1.tar.md5
Or could I install the .zip with Odin?
GT-P5110_PhilZ-Touch-Recovery_6.26.1.zip
no @jazzvel you can not use the zip (not without modification to flash it from current recovery).... i did that four you.
Download attached "recovery-tab2.zip"
copy it to your internal Storage or MicroSD
boot your recovery
flash the "recovery-tab2.zip"
reboot your recovery to take affect!
DON´T USE ATTACHED ZIP ON OTHER DEVICES - P511X ONLY!
It Worked!
Android-Andi said:
no @jazzvel you can not use the zip (not without modification to flash it from current recovery).... i did that four you.
Download attached "recovery-tab2.zip"
copy it to your internal Storage or MicroSD
boot your recovery
flash the "recovery-tab2.zip"
reboot your recovery to take affect!
DON´T USE ATTACHED ZIP ON OTHER DEVICES - P511X ONLY!
Click to expand...
Click to collapse
This worked flawlesly! Thanks!
If you don't mind me asking, just want to know for future reference
The recovery-tab2.zip contained the correct philz-touch recovery or What was it?
Thank you very much!
You are the man!
Inception Auto-Root only for SM-T113 (Galaxy Tab 3 lite new edition). It works pretty much like CF-Auto-Root work. You end up with supersu installed, and it reinstalls stock recovery when done.
DISCLAIMER
==============
DO NOT USE FOR SM-T110
You void your warranty when you flash something to your device
Use at your own risk, I'm not responsible for bricking your device.
Known issues
================
Screen flashes while installing supersu but it's nothing major
XDA:DevDB Information
SM-T113 Inception-Auto-Root , Tool/Utility for the Samsung Galaxy Tab 3
Contributors
tgalal
Source Code: https://github.com/inception-android/inception_base_samsung_goyavewifi
Version Information
Status: Testing
Created 2015-06-07
Last Updated 2015-06-07
Works like a charm on my SM-T113 - Samsung galaxy tab 3 lite 7inch.
Thank you !
How do I use this? Simply flash recovery_twrp.img with Odin?
Edit:
Ok I found your inception tool. I guess I have to use this. But still I don't really get it. Can you give some hints? Thanks a lot for your efforts!
custom rom for sm-t113
Any custom rom for? Cant seem to find one...
Thanks in advance...
.acy said:
How do I use this? Simply flash recovery_twrp.img with Odin?
Edit:
Ok I found your inception tool. I guess I have to use this. But still I don't really get it. Can you give some hints? Thanks a lot for your efforts!
Click to expand...
Click to collapse
You just need to flash the file called "inception-samsung-goyavewifi-autoroot.tar.md5" using odin. The inception tool was only used to generate this file, but you don't need to use inception for flashing. More about inception in this thread.
david.com said:
Any custom rom for? Cant seem to find one...
Thanks in advance...
Click to expand...
Click to collapse
None that I know of :/
Hello! where it's the "inception-samsung-goyavewifi-autoroot.tar.md5" file?
i don't see... where it's the link, please?
thanks!!!
jozemanue said:
Hello! where it's the "inception-samsung-goyavewifi-autoroot.tar.md5" file?
i don't see... where it's the link, please?
thanks!!!
Click to expand...
Click to collapse
If you go to the Downloads, download inception-samsung-goyavewifi-autoroot-SM-t113.zip , extract it and then you'll see inception-samsung-goyavewifi-autoroot.tar.md5
I have other question,
i need the custom recovery (or CMW or TWRP) i need "clone" a tablets with the same configuration. (50 tablets aprox.....)
it's possible create a md5 file for flash in odin wiht a custom recovery for create backups ?
thanks. (sorry for my english.... jejejeje)
jozemanue said:
I have other question,
i need the custom recovery (or CMW or TWRP) i need "clone" a tablets with the same configuration. (50 tablets aprox.....)
it's possible create a md5 file for flash in odin wiht a custom recovery for create backups ?
thanks. (sorry for my english.... jejejeje)
Click to expand...
Click to collapse
check out inception
ufffff very difficult for my, thanks for all!
please tgalal, are you possible create a md5 file with the recovery TWRP , please???? i don't understand the process... it's very hard to me....
i need prepare in the next week a 25 tablets SM-T113 in me work.... it's very easy with a custom recovery - backup....
thanks!
Great work, thank you. Have you tried flashing a custom recovery like TWRP yet?
kocag said:
Great work, thank you. Have you tried flashing a custom recovery like TWRP yet?
Click to expand...
Click to collapse
Hello, in here "https://github.com/inception-android/inception_base_samsung_goyavewifi"
in the folder img, have a recovery stock and twrp image, I am flash in the tablet, but, don't enter in the recovery appears a black image....
ODIN does not recognize my SMT113 - no com port recognized on ODIN
Any suggestions?
TAB3 recognized by my PC as a PTP connection
thanks
zolom said:
ODIN does not recognize my SMT113 - no com port recognized on ODIN
Any suggestions?
TAB3 recognized by my PC as a PTP connection
thanks
Click to expand...
Click to collapse
Hello, are you enter in "download Mode"?
it's power on the tablet with the "power + central button + down volumen"
in the first screen of download mode push the up volumen. ok, it's ready
now, connect the tablet in the computer with odin opened.
regards
I am on downloaded mode. Still Odin does not recognize the com port.
I will try another computer
Success at last . t113 is rooted. Now looking for recovery, which one do you rcommend?
Thanks
Can I flash the recovery_twrp.img via flashify?
Thanks
possible used in SM-T113NU? recovery in the near future?
tgalal said:
You just need to flash the file called "inception-samsung-goyavewifi-autoroot.tar.md5" using odin. The inception tool was only used to generate this file, but you don't need to use inception for flashing. More about inception in this thread.
None that I know of :/
Click to expand...
Click to collapse
thanks for your reply:good: