Database Info

[KERNEL] EA11 Voodoo kernel

Once again, jt1134 has delivered the goods. This is based on the EA11 leak, packaged with voodoo. For those of you that have been asking for it, here it is.
This kernel only includes the Voodoo ext4 lagfix, as without source code, Voodoo sound and color fixes are not possible. Full credit to Supercurio for the Voodoo lagfix code, as well as the scripts that jt1134 used to package it all into this kernel.
The kernel is also modified to support external bootanimations, ie: /system/media/bootanimation.zip
This package will also flash a modified recovery, which can be used with both Voodoo and non-Voodoo installations.
Make a backup. I am not responsible for what you do to your phone. Flash in recovery.
EA11 Voodoo kernel

I love you guys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
no homo
well quadrant got ~1400ish with this...so happy you guys got the initial release out...thanks again

Just flashed and enabled lagfix, quadrant score 1435 stock froyo leak. Thanks a lot!
Quick question seeing as this is built off the kernel that was leaked with the froyo this should work when we get our real official upgrade release right?
Swyped using USCC Mesmerize

Ok, dumb question here. How do I flash this without ClockworkMod Recovery installed? I don't have an option to do it from stock recovery.

Um you might need to get clockwork mod to install this.. You can probably it with odin but I dunno..
Swyped using USCC Mesmerize

Yeah, just read that in the Leaked Froyo thread. Red CWM installed.

Ok so I have to flash update.zip from stock recovery every time I need to get to red recovery.did that then flashed voodoo from red and no noticeable difference. Ntm tried to install boot animations just to see if voodoo went through and nothing happened. Im obviously missing something, any ideas?
Sent from my SCH-I500 using Tapatalk

Nice! Just flashed, rebooted into recovery via terminal (right to red CwM, thank you!) and enabled lagfix. One more reboot...sweet voodoo voice confirming it was working...
Nice quadrant and linpack scores. Very happy. Thanks devs!
Sent from my SCH-I500 using XDA App

Gotta enable lagfix after you flash the zip.
Sent from my SCH-I500 using XDA App

Ok so I tried to reboot to red recovery to enable lag fix. got hung up at the samsung screen. So I used odin to reflash froyo, followed by red recovery and reflashed voodoo , enabled lag fix and all is good once again.
You guys are the sizzle.
Sent from my SCH-I500 using Tapatalk
++ new issue.
phone does not ring for incoming sms.
not really sure whats going on. Anyone else experiencing this?
Dont know if it matters or not but i use handcent not the
stock sms app

dont feel bad...mine only uses the default text ringtone no matter what
guessing its a froyo bug
is this kernel undervolted?

atleast your working with a ringtone. i get no notifications whatsoever. no ring , vibe , or message counter in the notification bar. odd. ive checked handcent and the orig sms apps, everything is enabled.

YAY JT! Thanks for posting Phidelt!

1500 Quadrant. Kind of strange this scores lower than 2.1 Voodoo though.

I got 1692 last quadrant run, overclocked 2.1 with voodoo.
/edit: Just ran again, 2002
Sent from my SCH-I500 using Tapatalk

sageDieu said:
I got 1692 last quadrant run, overclocked 2.1 with voodoo.
/edit: Just ran again, 1855
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
what are you oc'ing to?

obliviator33 said:
1500 Quadrant. Kind of strange this scores lower than 2.1 Voodoo though.
Click to expand...
Click to collapse
Same here I got like 1935 with Voodoo5 on 2.1 abd hour like 1435 on this voodoo lag fix.
Swyped using USCC Mesmerize

I'm at 1.2 ghz. ran it again for 2002, that's the highest I've ever gotten.
Sent from my SCH-I500 using Tapatalk

Is this kernel undervolted? also, does it allow overclocking?

BakedTator said:
dont feel bad...mine only uses the default text ringtone no matter what
guessing its a froyo bug
is this kernel undervolted?
Click to expand...
Click to collapse
Mesmerizeuser said:
Is this kernel undervolted? also, does it allow overclocking?
Click to expand...
Click to collapse
No, this is not undervolted and does not allow overclocking. To do either of these we will need the source code for the kernel which android has not released yet. once that is released, new kernels can be built with those and other mods built in.

[Kernel][KG2]Bali Tweaks + OC! 1.28Ghz

I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel

Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse

I'll try adding in UV mods later, but I have to go home from work for now.

Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse

Check it again, teddy says it works
Sent from my SGH-T839 using XDA App

Im stuck at boot as well.
Sent from my SGH-T839 using XDA App

I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse

Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App

Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse

I rebooted to cwm
Sent from my SGH-T839 using XDA App

Maybe its my rom, I'll do more testing

It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse

Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4

if you can get back to CWM you can just flash the old kernel

Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App

I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?

Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App

Thats why. Gingerclone is KD1, this is for KG2 only.

ill update
Sent from my SGH-T839 using XDA App

Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now

Best kernel for Infused 2.0.4?

Just curious which is the best, and which are compatible. I would like to do some mild overclock settings - I've heard about Infusion-GB - is it the same as infusion 2.0?
Sent from my SAMSUNG-SGH-I997R using XDA App

TheMan42 said:
Just curious which is the best, and which are compatible. I would like to do some mild overclock settings - I've heard about Infusion-GB - is it the same as infusion 2.0?
Sent from my SAMSUNG-SGH-I997R using XDA App
Click to expand...
Click to collapse
Yes basically. I'm ocd to 1600 smooth
infused infuse helping other infused infuses?

If you want OC, Infusion-GB is the only choice.
There are three kernel choices at the moment:
The one that came with Infused (fairly outdated)
My "Daily Driver" (no OC, just undervolt)
Infusion-GB
Sometime I'll be doing another rebuild, and doing a "kangback" of all of the CM7 kernel commits. Not sure when, but gtg keeps pushing me to hop back and do some kernel catchup... I'm hoping I can Nandroid between Infused and CM7 reasonably easily.
Hopefully in not too long netarchy will release something. He was waiting for Gingerbread, and right after Rogers released it he caught a nasty cold that had him out of commission for almost two weeks.

Thanks guys, I couldn't find the infusion-gb link - can anyone direct me?
Sent from my SAMSUNG-SGH-I997R using XDA App

http://forum.xda-developers.com/showthread.php?t=1212485
[Kernel-OC/UV] Infusion-GB Best taste, smell and sound, for a Fusion Generator evar!
infused infuse helping other infused infuses?

Just go to first post, I use sgs kernel flasher from market eazy. Peezy
infused infuse helping other infused infuses?

Im on Bionix custom rom and I downloaf another kernel to go 1.6 and then my cel freez what kernel shoul I use to get 1.6
Sent from my SAMSUNG-SGH-I997 using XDA Premium App

Vicprote5 said:
Im on Bionix custom rom and I downloaf another kernel to go 1.6 and then my cel freez what kernel shoul I use to get 1.6
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1184563
[FROYO-Kernel-OC/UV-BLN] Infusion Kernel 2.0, now with 2 cores to choose from!
That's the only one you can use
infused infuse helping other infused infuses?

If your phone is hanging/freezing, your voltage settings need tuning.
Somewhere in the Infusion v1 thread there's a tutorial on hunting for the right settings. You can't just use someone else's settings - every device is different. If they weren't, Samsung would sell it as a 1.6 GHz CPU running at lower voltages.
Some people may not be able to hit 1.6 at all.

Kernel question

Bricked my last cappy.....and got the sgs II. Am I able to flash the Red Nebula kernel? I'm assuming I can, being that the II is an older kernel
SGH-I897
2.3.5
I897UCKJ3
Red nebula aggro-za
ILLUMINANCE 1.1
TEGRAK UOC 1.3 ghz

lilbigdude1 said:
Bricked my last cappy.....and got the sgs II. Am I able to flash the Red Nebula kernel? I'm assuming I can, being that the II is an older kernel
SGH-I897
2.3.5
I897UCKJ3
Red nebula aggro-za
ILLUMINANCE 1.1
TEGRAK UOC 1.3 ghz
Click to expand...
Click to collapse
you want to flash the red nebula kernel on the sgs2? your post is confusing, but if that is what you are asking, you are in for a world of hurt if you flash a captivate kernel on a sgs2

Sounds like you should stay away from flashing ANYTHING. doesn't sound like you have a clue whatsoever about what your doing. Lol.

mbc663 said:
Sounds like you should stay away from flashing ANYTHING. doesn't sound like you have a clue whatsoever about what your doing. Lol.
Click to expand...
Click to collapse
Thanks for the support....it was just a question. And yes I'm a noob, with loads of questions.
SGH-I897
2.3.5
I897UCKJ3
Red nebula aggro-za
ILLUMINANCE 1.1
TEGRAK UOC 1.3 ghz

It got bricked not because of something I did, my computer took a dump in the middle of a flash...
SGH-I897
2.3.5
I897UCKJ3
Red nebula aggro-za
ILLUMINANCE 1.1
TEGRAK UOC 1.3 ghz

Pirateghost said:
you want to flash the red nebula kernel on the sgs2? your post is confusing, but if that is what you are asking, you are in for a world of hurt if you flash a captivate kernel on a sgs2
Click to expand...
Click to collapse
Thanks I found what I needed
SGH-I897
2.3.5
I897UCKJ3
Red nebula aggro-za
ILLUMINANCE 1.1
TEGRAK UOC 1.3 ghz

new kernel

im rooted to eclips 1.4 can i load pbj kernel and will wifi work after loading pbj
stoped fp1 notice by changing efp4 to fp1 will this effect new kernel or will i have to go back to stock first

If you're on 1.4 flash the 130 PBJ, NOT the April one. Kernel will not affect your current build.prop status.
Sent from my SCH-I510 using xda premium