im rooted to eclips 1.4 can i load pbj kernel and will wifi work after loading pbj
stoped fp1 notice by changing efp4 to fp1 will this effect new kernel or will i have to go back to stock first
If you're on 1.4 flash the 130 PBJ, NOT the April one. Kernel will not affect your current build.prop status.
Sent from my SCH-I510 using xda premium
Related
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel
Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse
I'll try adding in UV mods later, but I have to go home from work for now.
Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse
Check it again, teddy says it works
Sent from my SGH-T839 using XDA App
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
I rebooted to cwm
Sent from my SGH-T839 using XDA App
Maybe its my rom, I'll do more testing
It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse
Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4
if you can get back to CWM you can just flash the old kernel
Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App
I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?
Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App
Thats why. Gingerclone is KD1, this is for KG2 only.
ill update
Sent from my SGH-T839 using XDA App
Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?
recent got a droid charge and was wondering what is the current crowd favorite for ROM/Kernal combinations. on the Fasscinate i've been usings TSM Res/SuperClean with KGB kernal so trying to see what the player picks of choice would be here.
thanks
I'm currently using Imnuts' PBJ kernel and the Eclipse ROM, and I'm loving it
A lot of us like the Eclipse ROM
http://eclipserom.com/forum/viewtopic.php?f=42&t=82
PBJ kernel is popular as well due to CPU tuning options, although I personally use Imoseyon kernel because it has been more stable for me.
http://rootzwiki.com/topic/137-kernel01-15-12peanutbutta-jelly-time/
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
I would choose Eclipse or Tweakstock with PBJ kernel.
Sent from my SCH-I510 using xda premium
I'm currently using Eclipse v1.1 EP4D and imnuts' 115 PBJ kernel converted to ext4 filesystem.
Tweakstock with object with voodoo
Sent from my SCH-I510 using Tapatalk
I'm also using Eclipse with Imnuts PBJ kernel. Make sure to use one of Imnuts's older kernels to convert to EXT4 before flashing the newest one.
been seeing people saying to flash imo's 4.x kernal for the conversion, then flash the pbj kernal
I've tried all thats available... Keep going back to Tweakstock with experimental kernel.
Sent from my SCH-I510 using xda premium
thad2b said:
been seeing people saying to flash imo's 4.x kernal for the conversion, then flash the pbj kernal
Click to expand...
Click to collapse
That's the way most people go. Post a thread in the Q&A if you're not sure about something. There's a lot of knowledgeable here people to help you out.
Hindle1225 said:
I've tried all thats available... Keep going back to Tweakstock with experimental kernel.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
This. Exactly this.
I was all TweakStock until the new Eclipse came out. I haven't even considered anything else since, and my battery life on PBJ is beyond anything I've ever had on this phone. There's no comparison for me now: Eclipse on PBJ.
Good to know I have considered re-rooting now there are more roms out. Sounds like eclipse is the wary to go.
Sent from my SCH-I510 using XDA App
I rooted my xoom every thing going good but in sys there is no over clock or any thing new from the tilmat kernel do I need to start over and go back to adb and I'm not getting the tilmat boot img at start up but kernel is installed and runing
Install SETCPU and overclock with that.
Also, its tiamat, not tilmat; and kernel, not kernle.
Sent from my MB860 using xda premium
Hey everyone thanks in advance for the help but i have a question and i hope its not a dumb one. So i was wondering im running eclipse 2.0 rom and wanted to flash the voodoo kernal can this be done and is there any gains to doing it im currently running the stock fp1 kernal.
I believe it can but if the kernel you are looking it is the new FP1 pbj kernel it will give you overclock,undervolt,ext4,voodoo sound and other minor things. If you can get on it I would
Sent from my SCH-I510 using XDA