I rooted my xoom every thing going good but in sys there is no over clock or any thing new from the tilmat kernel do I need to start over and go back to adb and I'm not getting the tilmat boot img at start up but kernel is installed and runing
Install SETCPU and overclock with that.
Also, its tiamat, not tilmat; and kernel, not kernle.
Sent from my MB860 using xda premium
Related
ok so i have te mytouch 3g rooted with cm6 and i want to flash an oc kernel from here. http://forum.xda-developers.com/showthread.php?t=698578 and it says it requires setting_max_freq what does this mean and how do i do it. please help and thank you very much
Hey. I just installed setcpu on CM6 and enabled set on boot. Then flashed the 614 kernel. That should work. I tried the 710 but it would just crash and bootloop.
Sent from my HTC Magic using XDA App
Well, on my Inspire I have flashed a custom rom that gives me up to a 1400 score on my Quadcore tests, yet I see other people hitting 2000-2500, what am I doing wrong? I'm using Core Droid v5.0 with a flashed radio that speeds up my download and upload speeds. Do you guys have any advice on how to speed up my Android?
And by the way, yes I do have set CPU and I have the settings on Max (1024000) and on Minimum (245761) I also have set on boot ticked along with profiles to save battery life. Any help is appreciated.
Sincerely,
RootTheNoob
Are you running a kernael that can be overclocked?
How can I tell of it can be overlooked, and I'm pretty sure I am its the default core Droid Rom, or do I have to install the kernel separately as well?
Sent from my Desire HD using XDA App
The default CoreDroid kernel isn't overclocked. Also if you have an overlooked kernel, setcpu would let you push past 1ghz.
Sent from my Inspire 4G using XDA App
I think you can use the leedroid kernel with coredroid can't you? If so, I'm using that one. It will overclock to 1.8. I only run at 1.2 though.
see post 957:
http://forum.xda-developers.com/showthread.php?p=12123867&highlight=leedroid#post12123867
So what do I set it to to overclock it?
First you have to floash the kernel. The you use the slider in set cpu to overclock.
How do I flash it?
Sounds like you have some reading to do. Download the kernel to the root of your SD card. Then from ROM manager use CWM to flash rom from SD Card. DO A BACK UP FIRST THOUGH. Read the first few leedroid posts and that will help
No, I know how to flash things but what kernel do I use?
What kernel do I use with Core Droid?
http://leedroid.ftp.rshost.eu/DHD-Kernels/
it is the 2.2.9. Check his post here and it will tell you what you are getting
http://forum.xda-developers.com/showthread.php?t=991848
Try the Inversely ROM...sure its stock based but the kernel can be oc'd to 1.8.... at 1.5 I got over 2600 and at 1.8 I got a 3309 and could do better sub some tweaking...right now though kernel is not a separate flash package.
Sent from my Desire HD using XDA App
Um..should be Ingersoll ROM.
Autocorrect fail....
What also helps is be fully charged...do your quad right after fresh boot and stop/shutdown all background processes you can..that's when you get best score.
Sent from my Inspire 4G using XDA App
Edit: hey he just posted his kernel ad a separate package...will make things interesting.
Guys, none of those kernels worked , I had to restore my Android to a previous backup.
Anything I can do?
Sent from my Desire HD using XDA App
Coredroid 5 is based off the the leaked GB rom no custom OC kernels are available. 1500 is about what I get with that rom also. If you want higher quadrant scores you need a froyo 2.2 based rom and kernel.
RootTheNoob said:
Anything I can do?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
You'll prolly have to download a Rom with an oc kernel and wipe everything before you install it.
May not be what you want to do...but might be the only way to get what speeds you're wanting.
Otherwise...you'll have to wait till there's an oc kernel for the Rom your using.
yelp there isnt Oc of the core with gingerbread.. they do a 2.2 with oc. i havent done those yet cause i do like this gingerbread.. Im just going to keep with this V5.0 MIUI guys have the OC kernal for their gingerbread but they have more steps than i wanna deal with.
I'm trying to find out the best way to install a new rom & kernel.
Should you update kernel first then rom? or rom first then kernel?
Always rom first then kernel.
Sent from my LG-P999 using xda premium
Thanks for the info...
any particular reason why?
Because when you flash a rom it contains a kernel that will erase any kernel you flash before hand. So say your wanting to flash morfics trinity kernel for cm7, you'd want to flash cm7 first then trinity kernel.
With the rom your using.... does your APN work?
I've tried the Power+ Volume UP and still no APN connection. My settings are there an selected but it doesn;t connect.
It should work, faux's rom are second to none imho.
But for right now i couldn't tell you since my baseband is unknown and gonna be sent back to LG.
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Its like that for all rom's and kernels for g2x.
Sent from my LG-P999 using xda premium
mightymike889 said:
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Click to expand...
Click to collapse
Because the default governors of stock kernels are already very good.
Sent from my Calculator with Android.
jose makalolot said:
Because the default governors of stock kernels are already very good.
I wish i could say thats true butninhave to chargebmybfone 2-3 times a day!!
Sent from my Calculator with Android.
Click to expand...
Click to collapse
Sent from my LG-V909 using XDA App
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?
So i just installed cm9, and my phone can only go to 1188mhz so how do i over clock because i know the sensation can go to 1.6
Install system tuner and try to raise the value. If not, install a kernel compatible with cm9 and u should be good.
On some of the early nightlies I was able to use faux123's 005b3 asop kernel and overclocked to 1.78. I only used it on a couple of the early nightlies. I tried flashing it a few days ago and got bootloops. I think that was on nightly 01, maybe 30.
Stock kernel works fine for me. Overclock will probably be available sometime down the road. Someone on cm9 dev thread is running faux's kernel now, apparently without problems. I guess YMMV, or maybe that should be MMMV.
Isn't there a kernel less than 1.78 like 1.67 or something. A 1.6 kernel should be ok and u don't need to turn it up to max.
Oomike said:
Isn't there a kernel less than 1.78 like 1.67 or something. A 1.6 kernel should be ok and u don't need to turn it up to max.
Click to expand...
Click to collapse
For CM9, faux is the only one that maybe works as far as I know. There is a mod over in the dev forum that overclocks to 1.5, I think. Haven't tried it, so I can't verify.
cm9 was great, but it wasn't stable yet and couldn't be over clocked
so i tried aokp that wasn't as good the screen looked too small and spaced out, but yo ucould over clock. And unfortunately without me knowing my phone was backing up my apps, ON MY DATA, so i owe virgin about 200$ now =_= for using 70$
In the end i went back to arhd, do yo uguy have any recommendation.
Use faux kernel 005b3 it will over clock it to 1.728.and it is stable and will run great.I have been running it for 5 days no problem.
Sent from my HTC Sensation using XDA
im still a noob at the wholle android thing, so how do you flash a kernal?
anthonyly said:
im still a noob at the wholle android thing, so how do you flash a kernal?
Click to expand...
Click to collapse
First make double sure the kernel is compatible with your rom and operating system and firmware . Then wipe cash.and dalvik cash, then flash like a rom. By downloading the Kernel to the root of your SD card and flash through recovery. I like 4 ext recovery. After wiping you install from SD card then reboot. Hope this helps.
Of course do the download first, then wipe, then flash
Sent from my Sensation 4G using xda premium
DLittle2012 said:
Use faux kernel 005b3 it will over clock it to 1.728.and it is stable and will run great.I have been running it for 5 days no problem.
Sent from my HTC Sensation using XDA
Click to expand...
Click to collapse
How is your battery life
Sent from my Sensation 4G
how do i check if its compatible?
just flashed faux123 newest kernal for the sensation with cm9, the only problem is that when i try mounting it to the computer, it unmounts the sdcard