I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel
Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse
I'll try adding in UV mods later, but I have to go home from work for now.
Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse
Check it again, teddy says it works
Sent from my SGH-T839 using XDA App
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
I rebooted to cwm
Sent from my SGH-T839 using XDA App
Maybe its my rom, I'll do more testing
It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse
Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4
if you can get back to CWM you can just flash the old kernel
Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App
I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?
Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App
Thats why. Gingerclone is KD1, this is for KG2 only.
ill update
Sent from my SGH-T839 using XDA App
Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now
Related
I would like to oc my g2x with the my stock rom please any suggestions or ideas
Sent from my LG-P999 using XDA App
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
JHaste said:
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
Click to expand...
Click to collapse
+1 Although not as much, maybe 1-2 times per day...but its soo good.
G2X
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Bspence415 said:
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
use the EB1.0.4 FR kernel... Eagles Blood is a modified stock rom so the trinity kernel will run on it...
That's the one I tried I can't get past the boot screen after i flashed through cwm recovery
Sent from my LG-P999 using XDA App
did u wipe cache n then go into advanced n wipe dalvik then flash???? i had that prob way back n have always did this method n it works
faux123 has just released a beta build of a Stock kernel.
http://forum.xda-developers.com/showthread.php?t=1102720
From the post:
faux123 said:
THIS IS ONLY FOR THOSE WHO ARE WILLING to BETA TEST THIS ON THEIR OWN PHONE... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.
Click to expand...
Click to collapse
I can't recall with all of the posts lately, but is there a voodoo lagfix for our beloved sgs4g? is there something stopping it from being applied? My coworker just got a charge and has a custom rom and kernel with lagfix already...
Just wondering if i missed something.
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Lagfix would be sick
Sent from my SGH-T959V using XDA App
fknfocused said:
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Click to expand...
Click to collapse
I'm sort of experiencing lag as well, but how are you overclocking?
Tegrak wouldn't let me do it, nor would SetCPU. It wouldn't go over 1GHZ.
~little off topic, sorry
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
fatherof4 said:
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
Click to expand...
Click to collapse
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Yeah setcpu does work once you've changed the frequencies in tegrak first.
I used tegrak on stock kernel overclocked to 1.4 and was also using set cpu before I flashed bali. All is still working w/ bali even set cpu.
Sent from my SGH-T959V using Tapatalk
danstheman7 said:
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Click to expand...
Click to collapse
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
de1packers said:
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
makavelicruz said:
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
Click to expand...
Click to collapse
mine did not, i get a vibrate at loading module then when i set the speed i get another vibrate. thats it. what are you trying to OC your phone at?
Mine did the constant vibrate once, although I don't recall what I was doing prior. Holding down the power button forced a reboot. Never happened again.
Also you will need to raise your voltages if you are going to go higher than 1.3 with pro.
Sent from my SGH-T959V using Tapatalk
I don't need it... I might deere a tiny bit of lag once in a while. I have linked it to the weekly Lookout scan so it's nothing to worry about. I, just wanted to ensure that I didn't miss anything. Thanks for the replies.
Sent from my SGH-T959V using XDA App
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
makavelicruz said:
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I know it drippings cool but why sacrifice the longevity of the cpu..i could understand it when the first gen phones were out but know that's just ludacris..
Sent from my SGH-T959V using XDA Premium App
I'm trying to find out the best way to install a new rom & kernel.
Should you update kernel first then rom? or rom first then kernel?
Always rom first then kernel.
Sent from my LG-P999 using xda premium
Thanks for the info...
any particular reason why?
Because when you flash a rom it contains a kernel that will erase any kernel you flash before hand. So say your wanting to flash morfics trinity kernel for cm7, you'd want to flash cm7 first then trinity kernel.
With the rom your using.... does your APN work?
I've tried the Power+ Volume UP and still no APN connection. My settings are there an selected but it doesn;t connect.
It should work, faux's rom are second to none imho.
But for right now i couldn't tell you since my baseband is unknown and gonna be sent back to LG.
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Its like that for all rom's and kernels for g2x.
Sent from my LG-P999 using xda premium
mightymike889 said:
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Click to expand...
Click to collapse
Because the default governors of stock kernels are already very good.
Sent from my Calculator with Android.
jose makalolot said:
Because the default governors of stock kernels are already very good.
I wish i could say thats true butninhave to chargebmybfone 2-3 times a day!!
Sent from my Calculator with Android.
Click to expand...
Click to collapse
Sent from my LG-V909 using XDA App
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?
I have synergy 1.3 right now on my phone. Have rooted and flashed this rom with no problems so far by following what I have read on this wonderful site. I would like to try and flash Imoseyon's leankernal. I have read that this works extremely well with synergy's 1.3. I have been following the steps from this guide > http://forum.xda-developers.com/showthread.php?t=1762709 and I have installed ez recovery. So couple questions.
1. I change the recovery to CWM 6.0.1, then hit the flash button and then the reboot recovery button?
2. will flashing a kernel change any settings on my phone for instance I am running apex launcher pro have everything set up the way I like it will all be the same after reboot?
3. is wiping cache/dalvik necessary? I have read elsewhere that when flashing kernels it is not necessary at all?
thanks!
1. Yes. I selected the 6.0.1 from the dropdown and then flashed it. I then made a nandroid and tested restore. I came from twrp 2.2 and wanted to make sure it restored fine.
2. Flashing the kernel will not effect your apps.
3. I didn't but it won't hurt clearing caches.
Sent from my SCH-I535 using xda app-developers app
mikejr83 said:
1. Yes. I selected the 6.0.1 from the dropdown and then flashed it. I then made a nandroid and tested restore. I came from twrp 2.2 and wanted to make sure it restored fine.
2. Flashing the kernel will not effect your apps.
3. I didn't but it won't hurt clearing caches.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the fast reply exactly what I was looking for now I can go ahead and try this tonight!
Have fun! I flashed this morning and have been enjoying it all day.
Sent from my SCH-I535 using xda app-developers app
I finished it up. I had to go back and reflash with 12-2 because the blue led wouldn't go away. Luckily I found that by reading farther through the thread. seems to be working great..thanks for your help again!
jws86 said:
I finished it up. I had to go back and reflash with 12-2 because the blue led wouldn't go away. Luckily I found that by reading farther through the thread. seems to be working great..thanks for your help again!
Click to expand...
Click to collapse
Oops. Should have mentioned that. I found out that if you get the kernel from his "latest" link it is the 12 version and not 12-2. I posted in the rootz thread about that but it likely got buried with the problems peppe are reporting about using the kernel with 1.4.
Good to hear that you got 2 (?) flashes with no problems. How's it working on your phone?
Sent from my SCH-I535 using xda app-developers app
Im also on synergy 1.3 and was wondering how much better does this kernel provide in battery life? Do we need to underclock to get bettter battery life?
Sent from my SCH-I535 using xda premium
mikejr83 said:
Oops. Should have mentioned that. I found out that if you get the kernel from his "latest" link it is the 12 version and not 12-2. I posted in the rootz thread about that but it likely got buried with the problems peppe are reporting about using the kernel with 1.4.
Good to hear that you got 2 (?) flashes with no problems. How's it working on your phone?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah they need to update that link I had actually read about it earlier when reading through the posts but forgot about it last night when downloading the initial link. So far so good. Very smooth haven't had a chance to test batter life will do that at work today giving it a full charge this morning.
Here you go. This is my battery life on 1.3 with the lean kernel and the app CPU sleeper. When I go to sleep I under clocked it at 384 ghz or something like that..then over clocked at 1.7 with the on demand govener and the I/O set to so..this is by far the best battery life I've gotten.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
95talondsm said:
Here you go. This is my battery life on 1.3 with the lean kernel and the app CPU sleeper. When I go to sleep I under clocked it at 384 ghz or something like that..then over clocked at 1.7 with the on demand govener and the I/O set to so..this is by far the best battery life I've gotten.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
Click to expand...
Click to collapse
That's pretty good battery life there! What are you underclocking? Min and max or just the min? What are you using to set your CPU clocks? I've been using RomToolbox. I have thinking about dropping the coin on SetCPU, but want to make sure it's what everyone is using to get this great of battery life. Sorry to thread hijack. I've come from a DX and didn't mess with these settings that much.
mikejr83 said:
That's pretty good battery life there! What are you underclocking? Min and max or just the min? What are you using to set your CPU clocks? I've been using RomToolbox. I have thinking about dropping the coin on SetCPU, but want to make sure it's what everyone is using to get this great of battery life. Sorry to thread hijack. I've come from a DX and didn't mess with these settings that much.
Click to expand...
Click to collapse
I have systemtuner but don't really know much about overclocking/underclocking at the moment. Not really sure what I should be touching. That is damn good battery life though.