I would like to oc my g2x with the my stock rom please any suggestions or ideas
Sent from my LG-P999 using XDA App
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
JHaste said:
the trinity kernel is the only one that will run on stock and i cant stand running it... all my phone does is lock up, have wake up wonkiness and force me to pull my battery 10 times a day...
Click to expand...
Click to collapse
+1 Although not as much, maybe 1-2 times per day...but its soo good.
G2X
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Bspence415 said:
There's a lot of different Trinity kernels in the section they say cm7 eb none show stock
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
use the EB1.0.4 FR kernel... Eagles Blood is a modified stock rom so the trinity kernel will run on it...
That's the one I tried I can't get past the boot screen after i flashed through cwm recovery
Sent from my LG-P999 using XDA App
did u wipe cache n then go into advanced n wipe dalvik then flash???? i had that prob way back n have always did this method n it works
faux123 has just released a beta build of a Stock kernel.
http://forum.xda-developers.com/showthread.php?t=1102720
From the post:
faux123 said:
THIS IS ONLY FOR THOSE WHO ARE WILLING to BETA TEST THIS ON THEIR OWN PHONE... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.
Click to expand...
Click to collapse
Related
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel
Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse
I'll try adding in UV mods later, but I have to go home from work for now.
Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse
Check it again, teddy says it works
Sent from my SGH-T839 using XDA App
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
I rebooted to cwm
Sent from my SGH-T839 using XDA App
Maybe its my rom, I'll do more testing
It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse
Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4
if you can get back to CWM you can just flash the old kernel
Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App
I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?
Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App
Thats why. Gingerclone is KD1, this is for KG2 only.
ill update
Sent from my SGH-T839 using XDA App
Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now
I'm trying to find out the best way to install a new rom & kernel.
Should you update kernel first then rom? or rom first then kernel?
Always rom first then kernel.
Sent from my LG-P999 using xda premium
Thanks for the info...
any particular reason why?
Because when you flash a rom it contains a kernel that will erase any kernel you flash before hand. So say your wanting to flash morfics trinity kernel for cm7, you'd want to flash cm7 first then trinity kernel.
With the rom your using.... does your APN work?
I've tried the Power+ Volume UP and still no APN connection. My settings are there an selected but it doesn;t connect.
It should work, faux's rom are second to none imho.
But for right now i couldn't tell you since my baseband is unknown and gonna be sent back to LG.
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Its like that for all rom's and kernels for g2x.
Sent from my LG-P999 using xda premium
mightymike889 said:
y doesnt faux have goveners in his kernel...
or does he and i just downloaded the wrong 1 ...im using his kernel and my batterylife is terrible (very heavy fone user)
Click to expand...
Click to collapse
Because the default governors of stock kernels are already very good.
Sent from my Calculator with Android.
jose makalolot said:
Because the default governors of stock kernels are already very good.
I wish i could say thats true butninhave to chargebmybfone 2-3 times a day!!
Sent from my Calculator with Android.
Click to expand...
Click to collapse
Sent from my LG-V909 using XDA App
i was running cm7 (2.3.7)with DS OC/UV Kernel Version 0.4.2 with setcpu. did all the wipe thing charged to 100% turned off phone about 6 hrs later turned back on battery at 25% what the hell. so now im running eb (2.3.7) no oc kernel i really want to be able to oc when i need to.
Try to use CM kernel, DS provides better battery life but doesn't read it correctly
Sent from my LG-P999 using xda premium
thank you ill give it a try could you please tell me if that doesnt work out how to go back to the kernel that came with the rom?
Dont forhet to do the backup first . Then just restore ur backup if needed, its always goes back to stock kernel when done. So u would need reflash custom kernel every time u restored.
Sent from my LG-P999 using xda premium
ah ok thank you makes sense
U welcome
Sent from my LG-P999 using xda premium
I just installed the [Kernel]CM7 [2.6.32.45] on my phone with CM7 already installed. when I turned on the device after the LG logo my screen turns black?!! What coulfd be the issue...I apologize if i come off as a idiot....
You installed what kernel???
From who?
From where?
Cm7 rom has a stock kernel, so you must have flashed a custom kernel, did you check to see if it was compatible with cm7??
Yes its this kernel [Kernel]CM7 [2.6.32.45]. I downloaded from XDA and it says its compatible with CM7. When i rebooted the G2x from CWM the LG logo showed up and then went to a black screen
Just enable USB connection and put a different kernel on ur phone and flash it. Ur phone obviously can't handle the kernel
Sent from my LG-P999 using XDA App
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
noobletsausecakebbq said:
Also this happened to me when flashing an underclocked kernel from cm7. But then i flashed a different version of it and its now working perfectly i get mad battery.life.
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Which CM7 Kernels could the G2x handle fo.....Im new to the whole kernel thing & im tryna get some help & I want to get more power from my phone.
Each kernel is different for speed, battery life, experimental... so on and so on. Every chipset is different in our phones some can't handle certain kernels.
Sent from my LG-P999 using XDA Premium App
So what kernels would work on any G2x?? Thanks for the tip idk all our chip sets are different.
Sent from my LG-P999 using XDA App
Personally om using latest faux's kernel, I'm on latest nightly - cm7
http://forum.xda-developers.com/showthread.php?p=13678237
Don't forget to wipe cache, wipe dalvik cache, then flash kernel, then run fix permission, reboot, enjoy
Sent from my LG-P999 using xda premium
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
player911 said:
Sounds they are referring to Faux's Kernel...
You have to match them up properly as CM7 just went through a few kernel changes and the Custom Kernel developers have to make them compatible. I think Faux has .44 out which is supposed to work...
Then you also have 4 options from Faux: Pre-OC/UV or Stock Speeds; and CM and DS battery drivers.
Click to expand...
Click to collapse
Thanks yall u helped out alot.............I just installed the WEAPON ROM with the FAUX Kernel & im using Pimp my CPU for OC & UC........Besides Faux what kernels would be good to use on all G2x phones?
Is anyone using a different kernel with the new v21y baseband?
Faux's 14b 2.
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
14b2? I'm familiar with the g2x prior to baseband update but I've never seen that one...link?
Sent from my LG-P999 using XDA
Check on rootz, second to last post.
Sent from my LG-P999 using Tapatalk
Faux all the way.
http://forum.xda-developers.com/showthread.php?p=25924733
Sent from my LG-P999 using xda premium
I'm using the 14b2 faux123 kernel with v21y. It's a lot better than the stock kernel.
Sent from my LG-P999 using XDA
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Sk8trfred said:
how's the battery life i don't want to loose my 3hrs screen on time using akop and faux
Sent from my LG-P999 using XDA
Click to expand...
Click to collapse
There you go.
Sent from my LG-P999
buru898 said:
Faux's 14b 2.
Click to expand...
Click to collapse
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
andrewNY said:
I'm using this kernel as well. I can confirm that it's much smoother and quicker than the stock kernel.
Sent from my Motorola StarTAC
Click to expand...
Click to collapse
What about battery life?
Sent from my LG-P920 using XDA
cricketAC said:
There you go.
Sent from my LG-P999
Click to expand...
Click to collapse
Switch to a different browser if want to save more battery
Sent from my LG-P999 using xda premium
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
aaCotyaa said:
I the 014b2 kernel working with rc3? I can't get to load past the boot animation.
Click to expand...
Click to collapse
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
cricketAC said:
There are two threads/ variations of faux kernels. One is for GB like this one and the other is for cm7 based. Use the other kernel 050b1 i think.
Click to expand...
Click to collapse
That one works with the new bb?
aaCotyaa said:
That one works with the new bb?
Click to expand...
Click to collapse
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
cricketAC said:
I dont think so cuz at that time cm7 wouldnt work with new BBz, dunnno if he patched it up(his kernel) later on.
Click to expand...
Click to collapse
Just looked into it. Apparently 050 is for Rc2 only.
---------- Post added 2nd June 2012 at 12:06 AM ---------- Previous post was 1st June 2012 at 11:49 PM ----------
OK, I got it working. I flashed my old favorite Trinity kernel. I really didn't expect it to work, but apparently it does.
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
jimmydafink said:
The Eaglesblood ICS release 3 came with Trinity Kernel and had UMS support They just updated to Supporting the V21Y baseband. going to try Harsh and see what happens
Click to expand...
Click to collapse
That would explain it then lol
I running T15-G2x-06022012 with CM7 RC3 OCed to 1400 with out issues
For Faux's 014b2 kernel, which do you recommend when running Kwes' modified stock ROM (v21y)? I see pre-UV and stock voltage versions. I'm leaning towards stock voltage, but is there a major advantage for the pre-UV? (I'm not even really sure what is meant by pre-UV -- pre-under voltage?)
Thanks!
EDIT: pre-UV is pre-under volted. From a little more reading, I found that pre-UV means the kernel has a -50mv UV already. So if using UV/OC tools and apps, you need to take into account that -50mv already.
http://forum.xda-developers.com/showpost.php?p=14887835&postcount=262
Hopefully this explanation helps anyone else with a similar question.