I can't recall with all of the posts lately, but is there a voodoo lagfix for our beloved sgs4g? is there something stopping it from being applied? My coworker just got a charge and has a custom rom and kernel with lagfix already...
Just wondering if i missed something.
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Lagfix would be sick
Sent from my SGH-T959V using XDA App
fknfocused said:
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Click to expand...
Click to collapse
I'm sort of experiencing lag as well, but how are you overclocking?
Tegrak wouldn't let me do it, nor would SetCPU. It wouldn't go over 1GHZ.
~little off topic, sorry
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
fatherof4 said:
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
Click to expand...
Click to collapse
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Yeah setcpu does work once you've changed the frequencies in tegrak first.
I used tegrak on stock kernel overclocked to 1.4 and was also using set cpu before I flashed bali. All is still working w/ bali even set cpu.
Sent from my SGH-T959V using Tapatalk
danstheman7 said:
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Click to expand...
Click to collapse
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
de1packers said:
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
makavelicruz said:
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
Click to expand...
Click to collapse
mine did not, i get a vibrate at loading module then when i set the speed i get another vibrate. thats it. what are you trying to OC your phone at?
Mine did the constant vibrate once, although I don't recall what I was doing prior. Holding down the power button forced a reboot. Never happened again.
Also you will need to raise your voltages if you are going to go higher than 1.3 with pro.
Sent from my SGH-T959V using Tapatalk
I don't need it... I might deere a tiny bit of lag once in a while. I have linked it to the weekly Lookout scan so it's nothing to worry about. I, just wanted to ensure that I didn't miss anything. Thanks for the replies.
Sent from my SGH-T959V using XDA App
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
makavelicruz said:
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I know it drippings cool but why sacrifice the longevity of the cpu..i could understand it when the first gen phones were out but know that's just ludacris..
Sent from my SGH-T959V using XDA Premium App
Related
I wanna run the OTB kernel from nemesis2all and it has cwm3 in the kernel is that going to conflict with anything?
Sent from my SCH-I500
The new OTB, shoudl be version 1.1b doesn't include a recovery in it, Now I did flash the one that had CWM3 in it from CWM2.5 and I didn't have any issues with it.
Now thats not to say you won't, so.
I'm running the new one without the recovery with it and its working just fine.
Alright the thing I wanted was bln, voodoo color and sound.
Sent from my SCH-I500
Wyman881 said:
Alright the thing I wanted was bln, voodoo color and sound.
Sent from my SCH-I500
Click to expand...
Click to collapse
All current voodoo kernels have those features.
Sent from my SCH-I500 using XDA App
scarmon25 said:
The new OTB, shoudl be version 1.1b doesn't include a recovery in it, Now I did flash the one that had CWM3 in it from CWM2.5 and I didn't have any issues with it.
Now thats not to say you won't, so.
Click to expand...
Click to collapse
When I flashed this it killed my data, that was when he first released it.
Sent from my MIUI SCH-i500
I'm running it eight now it's working good so far... how do i use voltage control? Activate bln?
Sent from my SCH-I500
Wyman881 said:
I'm running it eight now it's working good so far... how do i use voltage control? Activate bln?
Sent from my SCH-I500
Click to expand...
Click to collapse
you need to download the respective apps from market just search for "voltage control" and "bln"... I've never used bln cuz I use noled but voltage control is really cool. Just don't choose to save as boot settings unless you are 1000% sure it's stable. The fascinate thread has a few posts with voltages to look at. My phone flakes out at anything over 1200mhz and will not even run 14-1600mhz without having to pull battery.
Sent from my SCH-I500 using XDA Premium App
Mine will run 1300 no problem. Over that is gets iffy.
Mine will do 1300 but freezes when I go to reboot. Sticking with 1200
Sent from my SCH-I500 using XDA Premium App
Wyman881 said:
I wanna run the OTB kernel from nemesis2all and it has cwm3 in the kernel is that going to conflict with anything?
Sent from my SCH-I500
Click to expand...
Click to collapse
Just FYI - CWM3 would not be capable of flashing any of our flash packages as is, there is a script file located within META-INF in every flashable.zip that tells recovery how to apply the update files, since CWM3 uses edify vs. ammend scripting, our current one's are not compatible.
Phidelt has started converting the scripts (there would be 3, one for ROM flashing, Kernel flashing and Theme flashing.) However until CWM3 is used more (most people are still using the old scripts) we want to steer clear of CWM3. If you wanted that kernel (before the update which removed CWM3) you can use the SGS kernel flasher available from the market, to flash just the kernel from the .zip (it automatically picks it out)
If you do have CWM3, and want to flash something, you'll need to hop in IRC and ask around for the converted scripts - last I heard we had one complete (for ROM's) but I'm sure it wouldn't take long to get the other two converted if need be. Otherwise you'll need to revert back to the old CWM recovery.
Has anyone been successfull? i have tried every OC kernel and as soon as i overclock it just reboots my phone to a freeze (only way out is to either pull the battery or adb reboot). That being said the UV kernel runs fine.
Not sure if it has to do with the I9020A series.
But overall, each NS phone can tolerate its own OC levels. Some phones can tolerate only up to 1.2 GHz, some may be able to achieve 1.4GHz (or beyond). And for some of the unfortunate, some aren't able to OC at all.
Thus this post. I hope my phone is'nt the issue. it would be nice to push a little bit more out of it if i needed it down the line.
I over clocked mine to 1.4 and it was fine, I leave it at 1.0 tho, this friggin thing is quick enough for now.
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
themapleboy said:
hmm how do you check your radio. I'm gonna try that as a last resort. And i can set mine as 1.4 but as soon as i run a resource heavy task (n64) my phone locks up and reboot freezes.
Click to expand...
Click to collapse
Not sure why a radio would affect your ability to OC but...
Menu -> Settings -> About Phone -> Baseband Version
the last 3 are what you want to look at "JK8/KB1/KB3"
List all the kernels you've tried. The best in my opinion is Netarchy's 1.3.0.3-CFS kernel using SetCPU
Try intervals of 1.2 GHz too. My phone can only go up to 1.2 GHz
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
themapleboy said:
Yeah actually i had tried all of the bfs kernels. I just succeeded in getting Netarchy's 1.3.0.3-CFS kernel. And i can run up to 1.4 . Maybe the brain fk scheduler does not play nice with 9020a's
Click to expand...
Click to collapse
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
zephiK said:
awesome. I just prefer CFS because with BFS the boot animation doesn't show, and it bothers me.
Click to expand...
Click to collapse
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
mixxy said:
i flashed the BFS first, and lost my boot animation. Then i switched to the CFS, and the boot animation still didnt appear.
Any ideas as to how i can get it back?
Also, is there anyway to recover the stock kernel? I'd like to have it handy to be able to go back to it.
thnks
Click to expand...
Click to collapse
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
JTECJ said:
Hey everyone,
This is an off topic question but does anyone know what happened to the 1.6 OC support for Netarchy? I loved to see the absurdly high quadrant scores and instantaneous screen transitions.
Thanks,
Justin
Click to expand...
Click to collapse
you're better off asking that in the netarchy kernel thread in dev forums.
netarchy could answer that... not a lot of phones can tolerate 1.6 GHz Oc
Thanks, yeah i felt a little bad posting the question here. Though ive been an avid user for a long time i have never posted so i didnt have sufficient rites to post in the decelopment section yet : (
Justin
Sent from my Nexus S using XDA Premium App
zephiK said:
Wipe dalvik and cache. Flash a rom that flashes stock. Like cm7 but netarchys is so much better than stock
You can also get ogdobbers which is stock + ext4 + voodoo.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
so cm7 flashes the stock kernel?
mixxy said:
so cm7 flashes the stock kernel?
Click to expand...
Click to collapse
yep! low on bugs and freezes but no voodoo or bln.. dammit
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel
Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse
I'll try adding in UV mods later, but I have to go home from work for now.
Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse
Check it again, teddy says it works
Sent from my SGH-T839 using XDA App
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
I rebooted to cwm
Sent from my SGH-T839 using XDA App
Maybe its my rom, I'll do more testing
It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse
Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4
if you can get back to CWM you can just flash the old kernel
Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App
I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?
Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App
Thats why. Gingerclone is KD1, this is for KG2 only.
ill update
Sent from my SGH-T839 using XDA App
Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now
whats the safest overclock i can do to my charge, most ive done is 1.2ghz can i go 1.3 with no problems?>
-javier- said:
whats the safest overclock i can do to my charge, most ive done is 1.2ghz can i go 1.3 with no problems?>
Click to expand...
Click to collapse
I'm going to assume right off the bat you're on an EE4 froyo rom? the safest is 1.4ghz however not many peoples phones (myself included when I was on froyo) will be stable, there were random reboots and lockups galore... I was stable at 1.2ghz but as I said everyone's phones are different, but to answer your question yes you can go up to 1.4
anoninja118 said:
I'm going to assume right off the bat you're on an EE4 froyo rom? the safest is 1.4ghz however not many peoples phones (myself included when I was on froyo) will be stable, there were random reboots and lockups galore... I was stable at 1.2ghz but as I said everyone's phones are different, but to answer your question yes you can go up to 1.4
Click to expand...
Click to collapse
sorry i am on 2.3.5 at 1.2ghz i got 1620 in quadrant.
-javier- said:
sorry i am on 2.3.5 at 1.2ghz i got 1620 in quadrant.
Click to expand...
Click to collapse
how are you overclocking on GB?? we have no kernel source so this is not possible afaik just lagfix/ext4
anoninja118 said:
how are you overclocking on GB?? we have no kernel source so this is not possible afaik just lagfix/ext4
Click to expand...
Click to collapse
ill post pics. hold on
i just dowloaded this app call tegrak overclock and it just asked me for superuser permission and i was able to overclock it to 1.2ghz.
i have it set to 100 - 1200 and its stable so thats why i was asking if it was safe to do 1.3ghz.
-javier- said:
i just dowloaded this app call tegrak overclock and it just asked me for superuser permission and i was able to overclock it to 1.2ghz.
i have it set to 100 - 1200 and its stable so thats why i was asking if it was safe to do 1.3ghz.
Click to expand...
Click to collapse
That is setcpu not "Tegrak overclock.... And like he said.. you can't
https://market.android.com/details?id=com.tegrak.overclock&hl=en
Madelynn28 said:
That is setcpu not "Tegrak overclock.... And like he said.. you can't
https://market.android.com/details?id=com.tegrak.overclock&hl=en
Click to expand...
Click to collapse
but i have installed on my charge tegrak.overclock and i am using setcpu, or am i suppose to use one?
i have installed it on my charge
ill post a video soon.
You can overclock with that, but personally, why would you use an app to load a module to overclock? You're forcing the system to do something it doesn't want to, which could easily lead to problems.
imnuts said:
You can overclock with that, but personally, why would you use an app to load a module to overclock? You're forcing the system to do something it doesn't want to, which could easily lead to problems.
Click to expand...
Click to collapse
i been running it like this for 2 weeks and my phones is very stable, also ever since i went with gb it has not auto rebooted like before, all my apps run fast and stable
everything works and i been leaving it on 100-1200, i guess i am lucky.
http://youtu.be/t89VdzvkkhA
-javier- said:
i been running it like this for 2 weeks and my phones is very stable, also ever since i went with gb it has not auto rebooted like before, all my apps run fast and stable
everything works and i been leaving it on 100-1200, i guess i am lucky.
http://youtu.be/t89VdzvkkhA
Click to expand...
Click to collapse
deleted
SENT FROM THE DOG POUND
-javier- said:
i been running it like this for 2 weeks and my phones is very stable, also ever since i went with gb it has not auto rebooted like before, all my apps run fast and stable
everything works and i been leaving it on 100-1200, i guess i am lucky.
http://youtu.be/t89VdzvkkhA
Click to expand...
Click to collapse
Same here stock 2.3.5 clocked at 1.2ghz and its flying
Sent from my SCH-I510
Good to see that tegrak works with the charge now and the people that want overclocking can have it. Always good to have the option to do something.
kennydied23 said:
Good to see that tegrak works with the charge now and the people that want overclocking can have it. Always good to have the option to do something.
Click to expand...
Click to collapse
Im rocking this (2713 on quadrant )
SENT FROM THE DOG POUND
cujo6801 said:
Im rocking this (2713 on quadrant )
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
wow nice whats your clock?
cujo6801 said:
Im rocking this (2713 on quadrant )
SENT FROM THE DOG POUND
Click to expand...
Click to collapse
Yep. Just got ~2800 @1.3.
Sent from my Droid Charge running Infinity Beta
Guys I just downloaded tegrak and it says not supported I an on humble 4.22 should I get the ultimate version
Sent from my HUMBLE by Danalo1979 using xda premium
BlackHoleSlam said:
Guys I just downloaded tegrak and it says not supported I an on humble 4.22 should I get the ultimate version
Sent from my HUMBLE by Danalo1979 using xda premium
Click to expand...
Click to collapse
you need to change the model in the build.prop file.
it needs to say SCH-I510 not humble by Danalo1979 for the app to know what phone you are on.
mrtruckincowboy said:
you need to change the model in the build.prop file.
it needs to say SCH-I510 not humble by Danalo1979 for the app to know what phone you are on.
Click to expand...
Click to collapse
Thanks
Sent from my SCH-I510 using xda premium
I have synergy 1.3 right now on my phone. Have rooted and flashed this rom with no problems so far by following what I have read on this wonderful site. I would like to try and flash Imoseyon's leankernal. I have read that this works extremely well with synergy's 1.3. I have been following the steps from this guide > http://forum.xda-developers.com/showthread.php?t=1762709 and I have installed ez recovery. So couple questions.
1. I change the recovery to CWM 6.0.1, then hit the flash button and then the reboot recovery button?
2. will flashing a kernel change any settings on my phone for instance I am running apex launcher pro have everything set up the way I like it will all be the same after reboot?
3. is wiping cache/dalvik necessary? I have read elsewhere that when flashing kernels it is not necessary at all?
thanks!
1. Yes. I selected the 6.0.1 from the dropdown and then flashed it. I then made a nandroid and tested restore. I came from twrp 2.2 and wanted to make sure it restored fine.
2. Flashing the kernel will not effect your apps.
3. I didn't but it won't hurt clearing caches.
Sent from my SCH-I535 using xda app-developers app
mikejr83 said:
1. Yes. I selected the 6.0.1 from the dropdown and then flashed it. I then made a nandroid and tested restore. I came from twrp 2.2 and wanted to make sure it restored fine.
2. Flashing the kernel will not effect your apps.
3. I didn't but it won't hurt clearing caches.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the fast reply exactly what I was looking for now I can go ahead and try this tonight!
Have fun! I flashed this morning and have been enjoying it all day.
Sent from my SCH-I535 using xda app-developers app
I finished it up. I had to go back and reflash with 12-2 because the blue led wouldn't go away. Luckily I found that by reading farther through the thread. seems to be working great..thanks for your help again!
jws86 said:
I finished it up. I had to go back and reflash with 12-2 because the blue led wouldn't go away. Luckily I found that by reading farther through the thread. seems to be working great..thanks for your help again!
Click to expand...
Click to collapse
Oops. Should have mentioned that. I found out that if you get the kernel from his "latest" link it is the 12 version and not 12-2. I posted in the rootz thread about that but it likely got buried with the problems peppe are reporting about using the kernel with 1.4.
Good to hear that you got 2 (?) flashes with no problems. How's it working on your phone?
Sent from my SCH-I535 using xda app-developers app
Im also on synergy 1.3 and was wondering how much better does this kernel provide in battery life? Do we need to underclock to get bettter battery life?
Sent from my SCH-I535 using xda premium
mikejr83 said:
Oops. Should have mentioned that. I found out that if you get the kernel from his "latest" link it is the 12 version and not 12-2. I posted in the rootz thread about that but it likely got buried with the problems peppe are reporting about using the kernel with 1.4.
Good to hear that you got 2 (?) flashes with no problems. How's it working on your phone?
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
Yeah they need to update that link I had actually read about it earlier when reading through the posts but forgot about it last night when downloading the initial link. So far so good. Very smooth haven't had a chance to test batter life will do that at work today giving it a full charge this morning.
Here you go. This is my battery life on 1.3 with the lean kernel and the app CPU sleeper. When I go to sleep I under clocked it at 384 ghz or something like that..then over clocked at 1.7 with the on demand govener and the I/O set to so..this is by far the best battery life I've gotten.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
95talondsm said:
Here you go. This is my battery life on 1.3 with the lean kernel and the app CPU sleeper. When I go to sleep I under clocked it at 384 ghz or something like that..then over clocked at 1.7 with the on demand govener and the I/O set to so..this is by far the best battery life I've gotten.
Current~Samsung Galaxy S3 SynergyRom 1.3 & Imo's Lean Kernel v12 Oc'd @ 1.9ghz
~Acer Iconia A500 Stock
Past~Droid X Gummy ICS 1.2
Click to expand...
Click to collapse
That's pretty good battery life there! What are you underclocking? Min and max or just the min? What are you using to set your CPU clocks? I've been using RomToolbox. I have thinking about dropping the coin on SetCPU, but want to make sure it's what everyone is using to get this great of battery life. Sorry to thread hijack. I've come from a DX and didn't mess with these settings that much.
mikejr83 said:
That's pretty good battery life there! What are you underclocking? Min and max or just the min? What are you using to set your CPU clocks? I've been using RomToolbox. I have thinking about dropping the coin on SetCPU, but want to make sure it's what everyone is using to get this great of battery life. Sorry to thread hijack. I've come from a DX and didn't mess with these settings that much.
Click to expand...
Click to collapse
I have systemtuner but don't really know much about overclocking/underclocking at the moment. Not really sure what I should be touching. That is damn good battery life though.