Just curious which is the best, and which are compatible. I would like to do some mild overclock settings - I've heard about Infusion-GB - is it the same as infusion 2.0?
Sent from my SAMSUNG-SGH-I997R using XDA App
TheMan42 said:
Just curious which is the best, and which are compatible. I would like to do some mild overclock settings - I've heard about Infusion-GB - is it the same as infusion 2.0?
Sent from my SAMSUNG-SGH-I997R using XDA App
Click to expand...
Click to collapse
Yes basically. I'm ocd to 1600 smooth
infused infuse helping other infused infuses?
If you want OC, Infusion-GB is the only choice.
There are three kernel choices at the moment:
The one that came with Infused (fairly outdated)
My "Daily Driver" (no OC, just undervolt)
Infusion-GB
Sometime I'll be doing another rebuild, and doing a "kangback" of all of the CM7 kernel commits. Not sure when, but gtg keeps pushing me to hop back and do some kernel catchup... I'm hoping I can Nandroid between Infused and CM7 reasonably easily.
Hopefully in not too long netarchy will release something. He was waiting for Gingerbread, and right after Rogers released it he caught a nasty cold that had him out of commission for almost two weeks.
Thanks guys, I couldn't find the infusion-gb link - can anyone direct me?
Sent from my SAMSUNG-SGH-I997R using XDA App
http://forum.xda-developers.com/showthread.php?t=1212485
[Kernel-OC/UV] Infusion-GB Best taste, smell and sound, for a Fusion Generator evar!
infused infuse helping other infused infuses?
Just go to first post, I use sgs kernel flasher from market eazy. Peezy
infused infuse helping other infused infuses?
Im on Bionix custom rom and I downloaf another kernel to go 1.6 and then my cel freez what kernel shoul I use to get 1.6
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Vicprote5 said:
Im on Bionix custom rom and I downloaf another kernel to go 1.6 and then my cel freez what kernel shoul I use to get 1.6
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1184563
[FROYO-Kernel-OC/UV-BLN] Infusion Kernel 2.0, now with 2 cores to choose from!
That's the only one you can use
infused infuse helping other infused infuses?
If your phone is hanging/freezing, your voltage settings need tuning.
Somewhere in the Infusion v1 thread there's a tutorial on hunting for the right settings. You can't just use someone else's settings - every device is different. If they weren't, Samsung would sell it as a 1.6 GHz CPU running at lower voltages.
Some people may not be able to hit 1.6 at all.
Related
I can't recall with all of the posts lately, but is there a voodoo lagfix for our beloved sgs4g? is there something stopping it from being applied? My coworker just got a charge and has a custom rom and kernel with lagfix already...
Just wondering if i missed something.
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Lagfix would be sick
Sent from my SGH-T959V using XDA App
fknfocused said:
Nope, not ported over yet. Do you need it that bad? My phone is flying with the bali kernel coupled with the fugu mod, and if i wanted to OC it to 1.3-5.
Click to expand...
Click to collapse
I'm sort of experiencing lag as well, but how are you overclocking?
Tegrak wouldn't let me do it, nor would SetCPU. It wouldn't go over 1GHZ.
~little off topic, sorry
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
fatherof4 said:
u have to have one of the bali kernels installed and then u can use tegrak. Set cpu will not work. I have also applied the fugu fix and have bali 1.4 and Tegrak has me oc'd at 1.3!
Click to expand...
Click to collapse
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Yeah setcpu does work once you've changed the frequencies in tegrak first.
I used tegrak on stock kernel overclocked to 1.4 and was also using set cpu before I flashed bali. All is still working w/ bali even set cpu.
Sent from my SGH-T959V using Tapatalk
danstheman7 said:
I already have the Bali kernel, and it looks like Tegrak all of the sudden works...
hmpf.
fugu fix (CWM Flashable 0.1) doesn't seem to have helped that much, maybe a tiny bit.
http://forum.xda-developers.com/showthread.php?t=1020196
should i follow the steps inside that post to overclock? or are there new steps...
sorry about the off-topic discussion again, this is my last post, i promise
Click to expand...
Click to collapse
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
de1packers said:
You don't notice that the apps pull up quicker. They just burst out.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
makavelicruz said:
Those using Tegrak, once you changed the settings, did your phone started to vibrate nonstop??? I had to pull out the battery. Did the fugu tweaks, and have latest bali kernel. Is it supposed to vibrate like that?? Thanks for the help
Click to expand...
Click to collapse
mine did not, i get a vibrate at loading module then when i set the speed i get another vibrate. thats it. what are you trying to OC your phone at?
Mine did the constant vibrate once, although I don't recall what I was doing prior. Holding down the power button forced a reboot. Never happened again.
Also you will need to raise your voltages if you are going to go higher than 1.3 with pro.
Sent from my SGH-T959V using Tapatalk
I don't need it... I might deere a tiny bit of lag once in a while. I have linked it to the weekly Lookout scan so it's nothing to worry about. I, just wanted to ensure that I didn't miss anything. Thanks for the replies.
Sent from my SGH-T959V using XDA App
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
makavelicruz said:
I'm trying to get the same settings as u guys nothing drastic. Just want to learn where on tegrak you changed the controls. I am a bit confuse because there are like five levels of CPU under optimization not sure which one to touch. Just trying to oc 1.3 or 1.5 like I read some of yous have. Thanks for your help.
Sent from my SGH-T959V using XDA Premium App
Click to expand...
Click to collapse
I know it drippings cool but why sacrifice the longevity of the cpu..i could understand it when the first gen phones were out but know that's just ludacris..
Sent from my SGH-T959V using XDA Premium App
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.2 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
This 1.2 Ghz OC feels smoother and faster than stock, and better and more stable than 1.28Ghz. If you tried the 1.28 and gave up, try this 1.2, it's much better. I removed the link to the 1.28Ghz kernel because it was causing too many problems for everyone, and actually being slower due to freezing and overheating.
Battery life and stability not guaranteed
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
I have flashed this both on stock and on a custom KG2 rom, they both worked.
link removed because it was unstable - 1.28Ghz
Updated 1.2 KERNEL: http://www.multiupload.com/3QPMQY476F
3:55PM 8/3/2011
I provide no guarantees that this will work, make a backup before you try this!
This was really only made for all the kids who kept asking for an OC kernel.
It has been suggested that the 1.2Ghz kernel may be more stable, so I would suggest trying that one instead of the 1.28Ghz kernel
Flashing right now . You beat me too it ;p
sduvick said:
I added kernel tweaks from raspdeep's I9000 OC and got our bali kernel to OC, I'm running at 1.28 Ghz right now. I haven't tested this in terms of battery life, but there's a good chance your battery life may be less. So use with caution.
Use setcpu to control your cpu speed.
Credits to Dr. Honk for bali original, and raspdeep for OC source.
THIS IS FOR KG2 ONLY!
Flash through CWM as usual, I've tested flashing it and it worked fine for me, so it should work for you.
http://www.multiupload.com/WLONR4WAA6
Click to expand...
Click to collapse
I'll try adding in UV mods later, but I have to go home from work for now.
Remember once you add UV to check the voltage . Just a reminder & The kernel flash's but it auto-reboot's & then stay's stuck on SK4G splash screen .
sduvick said:
I'll try adding in UV mods later, but I have to go home from work for now.
Click to expand...
Click to collapse
Check it again, teddy says it works
Sent from my SGH-T839 using XDA App
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
I knew i wasn't the only one .
JoshEwAhh said:
Im stuck at boot as well.
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Now that your at boot screen you have to ODIN to KG2
JoshEwAhh said:
Should I just flash the old kernel?
Sent from my SGH-T839 using XDA App
Click to expand...
Click to collapse
I rebooted to cwm
Sent from my SGH-T839 using XDA App
Maybe its my rom, I'll do more testing
It's not your ROM cause with my ROM it doe's it & so doe's on teddy's ROM . Now my phone won't even recognize the PC>
sduvick said:
Maybe its my rom, I'll do more testing
Click to expand...
Click to collapse
Well it works on mine, so it's not broken entirely, so something has to be different here. pulling the link until its more tested.
Now that I think about it, the issue might have been that you were all on rfs, rather than ext4
if you can get back to CWM you can just flash the old kernel
Ok reflashed old kernel. All is well.
Sent from my SGH-T839 using XDA App
I odined back to stock and it still works... JoshEwAhh, what setup did you have before flashing?
Ginger clone and old bali kernel
Sent from my SGH-T839 using XDA App
Thats why. Gingerclone is KD1, this is for KG2 only.
ill update
Sent from my SGH-T839 using XDA App
Well, ths is cool, whats not cool is my comp wont even recognize my phone now..even in dl mode. at all. lol. yes..lol.
However im more then sure ill fix it no prob. this is pretty sweet though that its oc'ed now
I know some1 has to have a stable kernel for weapon 3.0 send link for download please
Are you having an issue with the stock Kernel? Just wondering.
Not really its just to slow and I can't boost up the CPU on stock kernel
Yea I'm having the same problem its too slow n laggy
Sent from my LG-P999 using xda premium
I used to use dragon but I had to many problems with it. I know there's gotta be a better 1
there isnt they all take like 3-4 minutes for every boot
http://forum.xda-developers.com/showthread.php?t=1102720
I use the UV kernel, but it takes a while to boot up.
Try faux 123's 013 kernel, oc and super stable
Sent from the fastest g2x in the world
Can you post a link for that one please?
Sent from my LG-P999 using xda premium
Yeah post a link for the download
Use the Faux 123 kernel & use Pimp My Cpu for the OC/UC....At 1.4 GHz OC i have gotten a 4105 score using Quadrant Advanced(Your results may vary)
Just google kernels g2x, you will find more than u need. I won't give up my combination, but oc'ed at 1.4g, it pulled a 6796 on antutu benchmark, just look at my avatar .
Sent from the fastest g2x in the world
I've gotten a 6798 on antutu usings fauxs oc/uv kernel at 1.5, but the phone does take alot longer to boot up.
Sent from my LG-P999 using xda premium
Fix coming for those long bootups
Here is a good theme made just for Weapon 3.0, I am currently using it and love it.
http://forum.xda-developers.com/showthread.php?t=1314526
nismokidz32 said:
Yeah post a link for the download
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1102720
http://www.multiupload.com/KFCY74Q85M
http://www.multiupload.com/DVO5CXS92I
I am running the new Weapon G2X 3.0 RC On a Wind Mobile LG-P999DW I was wondering which kernels are compatible with the device/rom. I too am looking for the ability to OC my processor.
So I got the faux 123 .0.1.3 running on weapon g2x 3.0 rc1 got a 6707 benchmark winning!!
Sent from my LG-P999 using XDA App
recent got a droid charge and was wondering what is the current crowd favorite for ROM/Kernal combinations. on the Fasscinate i've been usings TSM Res/SuperClean with KGB kernal so trying to see what the player picks of choice would be here.
thanks
I'm currently using Imnuts' PBJ kernel and the Eclipse ROM, and I'm loving it
A lot of us like the Eclipse ROM
http://eclipserom.com/forum/viewtopic.php?f=42&t=82
PBJ kernel is popular as well due to CPU tuning options, although I personally use Imoseyon kernel because it has been more stable for me.
http://rootzwiki.com/topic/137-kernel01-15-12peanutbutta-jelly-time/
http://rootzwiki.com/topic/3426-kernel-gb-imoseyon-kernel-stock-repacked-v400-11611/
I would choose Eclipse or Tweakstock with PBJ kernel.
Sent from my SCH-I510 using xda premium
I'm currently using Eclipse v1.1 EP4D and imnuts' 115 PBJ kernel converted to ext4 filesystem.
Tweakstock with object with voodoo
Sent from my SCH-I510 using Tapatalk
I'm also using Eclipse with Imnuts PBJ kernel. Make sure to use one of Imnuts's older kernels to convert to EXT4 before flashing the newest one.
been seeing people saying to flash imo's 4.x kernal for the conversion, then flash the pbj kernal
I've tried all thats available... Keep going back to Tweakstock with experimental kernel.
Sent from my SCH-I510 using xda premium
thad2b said:
been seeing people saying to flash imo's 4.x kernal for the conversion, then flash the pbj kernal
Click to expand...
Click to collapse
That's the way most people go. Post a thread in the Q&A if you're not sure about something. There's a lot of knowledgeable here people to help you out.
Hindle1225 said:
I've tried all thats available... Keep going back to Tweakstock with experimental kernel.
Sent from my SCH-I510 using xda premium
Click to expand...
Click to collapse
This. Exactly this.
I was all TweakStock until the new Eclipse came out. I haven't even considered anything else since, and my battery life on PBJ is beyond anything I've ever had on this phone. There's no comparison for me now: Eclipse on PBJ.
Good to know I have considered re-rooting now there are more roms out. Sounds like eclipse is the wary to go.
Sent from my SCH-I510 using XDA App
Can I flash the Infusion Kernel 1.8 onto Emancipation A: 1? For all intensive purposes I'm asking if the kernel can be flashed onto any rom.
I don't want to ask a stupid or noob question but, I haven't been able to find my answer anywhere. When I first started the rooting/flashing a rom process I was gonna go with Zeus Z-TR which I believe has voltage control built into it. After a bit of reading I settled on Emancipation but, I still wanna be able 2 OC/UV.
Also, I'm wondering about the beats audio that is built into the Z-TR rom. Is that because it comes with 1.8 kernel?
So, if someone can answer that question I would really appreciate it a lot.
I'd just flash the new synthesis kernel and as long as you're on gingerbread, you can flash another GB kernel you wish
Sent from my SGH-I997 using xda app-developers app
TikeKiller889 said:
Can I flash the Infusion Kernel 1.8 onto Emancipation A: 1? For all intensive purposes I'm asking if the kernel can be flashed onto any rom.
Click to expand...
Click to collapse
I'm thinking Infusion is Froyo and Emancipation is GB. If those facts are correct, then NO, you can not
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Thanks for the answers. After looking into it some more its safe to say I'm stuck without OC/UV since its GB.
If youre on gb, flash the synthesis kernel. Its oc/uv with working mhl on gb.
Sent from my SAMSUNG-SGH-I997 using xda app-developers app
I'll not familiar with synthesis.....must be new within the last year.
There are several kennels named infusion. The one you (op) mentioned was Froyo.
But developer/member Zen has two GB kernels named Infusion that allow overclock...Zen's Infusion A and Zen's Infusion B. 1600 for A and 1400 for B
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2
Here is synthesis. http://forum.xda-developers.com/showthread.php?t=1638138
Sent from my SAMSUNG-SGH-I997 using xda app-developers app