Hello everyone, please would someone give me some hint? I did something wrong, when flashing rom on my Touch HD to a win 6.5 version. Phone few times after flashing started up but get stucked while booting. After re-inserting batery it act like death. Nothing does. When I push power button or trying hard reset it doesnt react. When I put USB to a plug - orange led turns on, but after removing USB it keep lighting. Is there some way how to put working image into flash rom if phone is off? What can I do? Is there any chance to fix that or just put it into trash?
Thank you for your help and your time!
Related
Hi
I have had my vox for about a year now, and yesterday I updated the ROM, and installed SmartToolKit on it. I was then browsing my contacts, when the phone suddenly freezed. Then I pushed the "turn off button" on the top of the phone, but nothing happened. Then I had to remove the battery. When i put in the battery again the phone wouldn't turn on anymore, and it still wont. I have tried to hard reset it, but nothing happens. When I try to turn on the phone, the LED lights for about a second, and then it goes out. The display doesn't show anything, and the phone doesn't vibrate. I have tried to take out the memorycard and simcard, but it does not help. It can go to boot mode when i push and hold the camera button while pluggin in the USB cable. I have tried updating the ROM again ind boot mode. But that doesn't help. What is wrong, and what can I do?
Baryylos
Baryylos said:
Hi
I have had my vox for about a year now, and yesterday I updated the ROM, and installed SmartToolKit on it. I was then browsing my contacts, when the phone suddenly freezed. Then I pushed the "turn off button" on the top of the phone, but nothing happened. Then I had to remove the battery. When i put in the battery again the phone wouldn't turn on anymore, and it still wont. I have tried to hard reset it, but nothing happens. When I try to turn on the phone, the LED lights for about a second, and then it goes out. The display doesn't show anything, and the phone doesn't vibrate. I have tried to take out the memorycard and simcard, but it does not help. It can go to boot mode when i push and hold the camera button while pluggin in the USB cable. I have tried updating the ROM again ind boot mode. But that doesn't help. What is wrong, and what can I do?
Baryylos
Click to expand...
Click to collapse
Welcome
Have you tried reflashing another ROM?
And please READ the Wiki
Also check here: http://forum.xda-developers.com/forumdisplay.php?f=358
orb3000 said:
Welcome
Have you tried reflashing another ROM?
And please READ the Wiki
Also check here: http://forum.xda-developers.com/forumdisplay.php?f=358
Click to expand...
Click to collapse
Yes I have tried that. Still can't get it to work.. Do you know what I can do ?
Hi all,
I have a Tornado which is either broken or bricked. When I turn
the phone on, I see the initial HTC screen, and then the screen
goes black after a few seconds and I hear a soft "tock" sound
from the phone and sometimes the phone restarts this, sometimes
it just stays at the black screen.
A few times I managed to put it into bootloader mode, but I can't
seem to be able to do it anymore.
What may be the problem? Dead battery? I have two and both do
the same. When I plug it to the wall charger, it seems like it is fully
charged (the wall charger has a led to show that).
None of the LEDs on the phone are working. Only sometimes
when the phone is turned on, a red blink for the power.
Connection to PC doesn't work in any condition. So I am trying to
figure out a way to flash it using the SD Card. Do I have to have a
nbh file to flash using the SD Card? All roms I downloaded come in
nbf format. Is there a way to convert nbf to nbh? And does
anybody know how to flash a Tornado from the SD?
Hey all,
I need some help. The other day my touch cruise was working fine, but I wasnt able to connect to the network, and I thought it was time to do a soft reset. After soft reset my phone has now stopped working. It is stuck on the screen that says:
POLA100
SPL-3.13.0000
CPLD-2
The screen has 4 color bars on it, in this order:
RED
GREEN
BLUE
WHITE (SERIAL OR USB)
Every time I reset the phone it quickly flashes the screen with a messege that I believe says "No Image Found"
Any ideas on how I can fix this?
Thanks for all your help guys in advance!
Matrixum
A quick update...
I have managed to get back into the phone. I plugged it into the usb, and of course it would not recognise it. However, after it was plugged in I held down the camera button, and the power button and pushed in the reset button, and vola the phone restarted back to normal. I have not lost the operating system or anything. I am not sure what will happen if I turn it off. So I plan on backing it all up and then trying to turn it off and on.
But if you have any answers to this problem please let me know as I am not sure what i have done.
Thanks again guys
Matrixum
Update:
Ok everytime I turn off my phone I go back to the tri color screen. The only way for me to get back into the phone is if I plug it into the USB and hold down the camera button and hit the soft reset. Any ideas?
I guess nobody has had this problem? I must be the first! Seriously.... Well I still have the problem, each time I shut off the phone and turn it back on it goes to the tri color screen. I have to do my combination of camera button and soft reset in order to get the phone to start properly. I dont loose any information, but the phone is now running very slugish at times.
Once again, any help would be great... Unless I am really the first one to run into this problem.
Thx,
Matrixum
Hmmm... I have no idea what could the problem be.
But I have some questions:
1. What OS is/was on your Polaris?
2. Have you managed to backup your data via ActiveSync or other means?
It looks to me like you're stuck somewhere in the upgrade process. But I'm not sure, just guessing.
I'd recommend flashing Polaris with official ROM.
Be aware that you'll lose all your data on device.
Hi, I am STUCK!! My phone (HTC Touch Pro) gets stuck in the soft reset mode. I was able to get it to the tri-color screen, but could not get any further than that. Tried to follow some directions by going through the connections and settings, but it could not find the usb port. I need help, if you could get me past this so I could reset my phone, that would be great!!! I am brand new at this and know nothing. Thanks, Nikki
My red screen says:
RAPH800
SPL-0.36.0000
MicroP-Hermann (LED) v0C85
Green screen says:
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20
Nothing is in the blue screen
Thanks for any help!!!
try to hard reset it, check it here http://forum.xda-developers.com/showthread.php?p=2643414 or http://forum.xda-developers.com/showthread.php?p=2525584
for more informations, visit the wiki http://wiki.xda-developers.com/index.php?pagename=HTC_Raphael
HTH
Have you flashed anything to it? I'm not that familiar with cdma devices. If the hard reset doesn't work, then try taking the battery out for a while, then putting it back in and hitting the power button. If nothing works, and you haven't done any flashing, just take it back for an exchange.
how to run rom when HTC pro is frozen, won't boot or cuts on n off
--------------------------------------------------------------------------------
****DOn't take battery out after hard boot***
1.just watch videohttp://www.youtube.com/watch?v=sk56olMkCtU and do what they do but dont take battery out. LEAVE phone STUCK on BOOT screen. Nothign else will move or work but you want phone just like that.
2. connect usb cable to active sync. (this may not link up but leave usb connected anyhow) Do not delete phone profile.
3.use rom like Download MightyROM6_Herman.exe avail at: http://www.lilrico.com/Mighty/mightyromblog/?p=454
4 although active sync is still attatched but may not be connecting. It will connect thru usb anyway when you run the rom software. http://www.youtube.com/watch?v=fV2I2WAFkg4&NR=1
This worked and kept phone from cutting on and off. and restored ROM. don't know about original htc boot. but your phone will work under this rom for now and you can go from there.
Hi,
I've flashed my phone (HTC Touch Pro) with Hardspl and then the latest Energy ROM.
Everything went perfectly and I was impressesd with how simple and easy it was and how much difference the ROM made to the phone.
Today, while using the camera, the screen went blank.
I tryed turning the phone off, pulling battery and a hard reset but its still the same.
Even after hard reset, the screen is blank but if i press the power button, on the second press, I get a flash of whats on the screen and then it goes blank again.
Should I try to reflash the phone again?
I've searched but not found the same issue
Thanks
The touch screen is still working and sometimes i can see the display, but its very dark and hard to read. Is the flex cable that needs changing?
Why would it stop working so suddenly?
Should i take it apart to reseat it?
Ok, I've found the same issue in a few other peoples phones but they seem to have beeen resolved by sendin the phone back under warantee.
I dont have that option unfortunatly so need to find a fix.
The only thing wrong with the phone is the screen backlight that suddenly failed
Can anyone help me or point me in the right direction please? I cant find a definite diagnosis anywhere
New Flex cable?
New Screen?
Pray?
Thanks
Back to stock SPL and stock ROM
Still no luck