Hi all,
I have a Tornado which is either broken or bricked. When I turn
the phone on, I see the initial HTC screen, and then the screen
goes black after a few seconds and I hear a soft "tock" sound
from the phone and sometimes the phone restarts this, sometimes
it just stays at the black screen.
A few times I managed to put it into bootloader mode, but I can't
seem to be able to do it anymore.
What may be the problem? Dead battery? I have two and both do
the same. When I plug it to the wall charger, it seems like it is fully
charged (the wall charger has a led to show that).
None of the LEDs on the phone are working. Only sometimes
when the phone is turned on, a red blink for the power.
Connection to PC doesn't work in any condition. So I am trying to
figure out a way to flash it using the SD Card. Do I have to have a
nbh file to flash using the SD Card? All roms I downloaded come in
nbf format. Is there a way to convert nbf to nbh? And does
anybody know how to flash a Tornado from the SD?
Related
help me please i have a unlocked sprint touch pro 2 i flashed a gps rom fix
and now my phone wont turn on i tryed a hard reset and nothing
you see anything on the screen at all?
Tell something moore, what's happening when you try to turn it on, or when you plug usb cable, did you flash HardSpl first?
yea nothing completely dead charge light comes on thats it. its unlocked and have energy rom on it i think i flashed a gsm gps fix and bam bricked.
Easy fix
I did this on Wednesday (flashed the wrong type of ROM onto my Verizon phone).
After a little panic, I found the solution. Take the battery out of the phone, put it back in, and hold down "Volume Down" and "End" (power on) at the same time. The phone boots to its "bootloader" - a screen with two or three color backgrounds that looks sort of like an old school bios screen.
From there, you can connect the USB cable to your PC, and load an appropriate ROM (I used MightyRom because I had trouble finding the EnergyROM for Verizon).
Did you get this figured out?
Did you get this figured out?
Here is how I UN-bricked my Sprint phone..
By the way...I got this from some one else at this site. It worked (sorry I can't give the proper credit who wrote it first)
Copy the file "RHODIMG.nbh" to a memory stick formated at fat32, put it in the phone. (it should be in the directory where your initial ROM install file is on you Windows computer)
1. Phone off (pull the battery)
2. Pressed the power and Volume Down button simultaneously
3. Power on while doing step 2 (I inserted the battery and then did this step)
4. Load ROM by pressing power again
5. Note bootup will be extremely slow, wait for red text, then wait even longer for GUI
6. I waited on screen for a couple of minutes (at least)
hello guys. usually when phone's plugged in to my computer for file transfer or after that, i cant use the phone. when i press the power button, the screen stays black and i cant touch anything, while the 4 touch buttons are lit up. its very annoying as i have to do the battery-yank thing and turn the phone on again. any solutions?
Yeah. Same think happened to me when my SD Card had bad sectors. Just buy a cardreader and scan and attempt to repair'em. If that doesn't help, just make a back up on your PC, format your SD Card and backed it up.
Hope it works for you too...
P.S. When I was using with my phone during file transfer and my phone freezes, it doesn't go black but stays with the current "frame" and just the LED lights. I don't know what's in your case.
Check this thread out. It is pretty much the same thing.
http://forum.xda-developers.com/showthread.php?t=1175952
Also you can use Androidini Open Recovery to check your sectors on the SD card. Works for me.
Hello everyone, please would someone give me some hint? I did something wrong, when flashing rom on my Touch HD to a win 6.5 version. Phone few times after flashing started up but get stucked while booting. After re-inserting batery it act like death. Nothing does. When I push power button or trying hard reset it doesnt react. When I put USB to a plug - orange led turns on, but after removing USB it keep lighting. Is there some way how to put working image into flash rom if phone is off? What can I do? Is there any chance to fix that or just put it into trash?
Thank you for your help and your time!
Hi everyone! Bad news :
I did an upgrade from WM 5.2 to 6.5 on my VOX/S710 and everything was ok, except for the rom wich was in English/German. I was looking for a Spanish one.
I've found a rom I thought it was the correct one but when I did the flash procedure the cellphone suddenly turn off. I've pushed the "on" button and nothing, i put to charge the battery (USB and main power cable)but there's no led activity, it's completely dead.
I've tried to enter the 'bootloader' mode but it doesn't work and the same thing for the soft reset.
The battery was fully loaded before that happens.
Extra: sometimes when i plug the usb, the red led shines for less than a second. I've read that maybe a fuse is broken but i couldn't find any info about it, where's placed, etc.
¿What can i do? Thanks.
I have a Google Pixel 1 that I gave to my daughter for her first phone. It was working perfectly yesterday and then the battery seemed to die, so she plugged it in to charge. Today, it looked like it wasn't turning on. There's nothing on the screen, no sounds, no vibration. I thought the battery was still dead and it wasn't charging, but when I plug it into my computer, Android File Transfer pops up like it normally does when I plug a phone in. So I think it's on but just not displaying anything on the screen. I can't even use AFT because it gives me the usual error message that means I have to unlock the phone, but I can't see the screen to put in the password to unlock it.
Is there anything I can do to recover the phone? And what is the diagnosis. Did the screen just die?
Thanks!