Related
Hi mates, yesterday I've made a change for 7 inch galaxy tab 2, 8GB, more specially the p3110, as well as I rooted it and updatet it and about 6am insomnia makes me take the tablet, So far so ordinary ...
well then turn it on and tells me that my sd is empty Nothing, I lost the data and I am about to make clear the sd, pretends to format and passed 15-20 secs it power off.
I get out of bed and went to connect it to the wall charger, knowing as sometimes if you leave the battery holding power and swiping your finger across the screen some time reappears stack and reloads it, I do it today that should have full charge and nothing, doesn't returns, when I connect it usb pc and when I do turn on the tablet it sounds windows connected usb sound and at the second connecting it disconnects device again, and there will end up pressing the button again
I removed the back cover and I have even removed the battery about 2 hours, reassembled and still doing the same ....
Summary: Does not display anything on the screen and battery charging even having tried the method "samsung" when this happens, (which only have it, with its official android I had to do it once, and recalibrate the battery even reach 4000 and mark its 100%, hence looked last longer and it was when the update and was working fine about 3 hours with it, no problem opening emails looking face and such, nothing out of the ordinary, there is no heat either, doesn't gave any fatigue sign and the battery was at 80% when It turned off suddenly), when you turn the computer connected to the usb nothing still while connecting a second and off the next, only once, until you return to try give the power or any combination, whether recovery, download, nothing shows anything on the screen
however when I connect it to pc to it hears something in windows, that tells me that the board is not dead, and the lcd was working ok and absolutely have any shot.
can you think of anything? I'm already crazy with this ... odin doesn't sees it, that connects the second and still sounds the little sound of I connect I get disconnected every time you try to pull it out, hopefully a recoverable semibrick at home or less silly ...
still nothing??
HackerVR said:
Hi mates, yesterday I've made a change for 7 inch galaxy tab 2, 8GB, more specially the p3110, as well as I rooted it and updatet it and about 6am insomnia makes me take the tablet, So far so ordinary ...
well then turn it on and tells me that my sd is empty Nothing, I lost the data and I am about to make clear the sd, pretends to format and passed 15-20 secs it power off.
I get out of bed and went to connect it to the wall charger, knowing as sometimes if you leave the battery holding power and swiping your finger across the screen some time reappears stack and reloads it, I do it today that should have full charge and nothing, doesn't returns, when I connect it usb pc and when I do turn on the tablet it sounds windows connected usb sound and at the second connecting it disconnects device again, and there will end up pressing the button again
I removed the back cover and I have even removed the battery about 2 hours, reassembled and still doing the same ....
Summary: Does not display anything on the screen and battery charging even having tried the method "samsung" when this happens, (which only have it, with its official android I had to do it once, and recalibrate the battery even reach 4000 and mark its 100%, hence looked last longer and it was when the update and was working fine about 3 hours with it, no problem opening emails looking face and such, nothing out of the ordinary, there is no heat either, doesn't gave any fatigue sign and the battery was at 80% when It turned off suddenly), when you turn the computer connected to the usb nothing still while connecting a second and off the next, only once, until you return to try give the power or any combination, whether recovery, download, nothing shows anything on the screen
however when I connect it to pc to it hears something in windows, that tells me that the board is not dead, and the lcd was working ok and absolutely have any shot.
can you think of anything? I'm already crazy with this ... odin doesn't sees it, that connects the second and still sounds the little sound of I connect I get disconnected every time you try to pull it out, hopefully a recoverable semibrick at home or less silly ...
Click to expand...
Click to collapse
What exactly the problem?can you tell us in a lil bit short
post it in
GENERAL CHAT!! All XDA'ers Welcome (noobs included)
maybe this might help....discussing with others who faced the same....and how they solved it :fingers-crossed:
ask your problem in the above thread
and dont make a whole thread buddy....try keeping the general section clean
Hey guys,
just replaced my screen by myself and it isn't working. It boots and the screen lights up for a few seconds but thats it. So it seems like I ****ed up somewhere. :/
Now I've got some questions for you guys.
1. What could cause this error? Since it's already not working I don't mind taking it apart some more and trying to fix it.
2. Do you think if I send it to the support from OnePlus they will take a look at it?
3. The whole reason I did this was to get my data back. Is there any way to access the data on the phone without the touchscreen? I encrypted it using CynogenMod. USB-Debugging is enabled.
Thank you so much guys, I'd really appreciate some help. This **** is really tearing me down since it was a lot of work.
I did this on my own phone but Idk about OPO. If you use the power+voldown method to boot into recovery (yes ik nothing on screen) then connect a usb and see what happens
If you power it on, wait 5 mins then call it and if the phone rings you should be able to rule out the display and speakers and storage, obvs if the display is still not on at this point it is probably the display.
you can also adb from recovery and or fastboot so you should be able to see it in there if it is still working (make sure you change the phone for a decent amount of hours before you do any of these) If the display is dead its likely its been on for the last day and dead
Sorry for the late answer, really appreciate your help!
So if I connect the phone to the PC (tried it in recovery and in normal mode) windows detects the phone under "Devices" but sadly if I type in "adb devices" in cmd it doesn't detect the device.
But still, windows is detecting the phone so it seems to still function. I booted into recovery and I could use the touscreen and the lower buttons. I couldn't see anything but it was vibrating whenever I was using the touscreen. So it seems like only the display part is broken.
Can't call the phone since it's fully encrypted so I need to type in a password before booting anything (recovery, normal mode, ...)
I'll try to contact the vendor of the display and see what he has to say.
If anyone got any more tips I'd appreciate them. I'm a pretty big noob so I even appreciate "common sense" tips.
I know this may be a "common sense" thing to say, but double check your connections. Sometimes the connectors aren't made properly and a pin could be covered so you can try connecting and disconnecting several times to see if it clears up.
Since the touch screen was registering and vibrating, then it could be the backlight that's broken. Try holding a flashlight at an angle and see if you can make out anything on screen. If it's the backlight, then you can probably back up your data in case your phone does end up breaking.
reconnected everything multiple times and also tried the flashlight trick. sadly with both no luck
but something good:
adb recognizes my phone in "recovery"
bad news: no commands work, most likely because the phone is encrypted. if I enter a command nothing happens, it looks like its loading forever.
any ideas?
Hey!
I also had the same problem after I replaced OPO's screen about one year ago. The replacement screen was from ebay.
I could see the Cyanogen logo but after a few seconds the screen became black. Booting into recovery mode worked well.
On the video also ROM boots well but the screen stays black.
https://www.youtube.com/watch?v=VcWDCJIkPKQ
Eventually, the screen was defective and I returned it and bought new one.
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
rawon3 said:
Hey everyone who reads this.
I'd like to start my topic with apologising if I post this in the wrong section.
So, I have a LG Spirit H440N LTE for about 3 years now, maybe a little less. I've always taken good care of it, both physically and in updates / security wise aswell.
My phone has been working flawlessly until the last 2 days. 2 days ago i was charging my phone, and when it vibrated (meaning its 100%) I pulled the cable off, and pressed the power button (power button locks - unlocks the screen) the screen didn't turn on. I was like "wow that's strange" but didn't care much, i just kept pressing the button every 5-6 seconds, nothing.
At that point I pulled the battery out, let it sit for a short time and then put it back, start the phone, I felt the vibration (meaning it's starting up) but no screen, so my first idea was that I need to get a new firmware and completely reinstall my phone, as it seems like it got bricked.. for no reason, by itself ? Strange thing but I accepted it and literally been googling for 9 hours now and I find more and more issues.
After I got LG FlashTool, drivers, and even 3 different firmwares, I wanted to start the phone in download mode to start upgrading, but even though I held down "volume up for 5 seconds and then put the usb cable in" nothing happened, no screen, my PC didn't recognise the phone either.
So I got a little bit mad and pulled the cable out from the phone, I wanted to remove the battery, but out of nowhere the phone suddenly started loading in, screen working completely fine, i could do whatever i want, so my first thing was to do a hard reset. After the hard reset I set up my usual stuff (important apps etc) and I locked the screen so my battery won't go down. Little did I know, I ****ed up again, because ever since that happened, I can't get my screen to work again. I tried everything I could but my PC still doesn't recognise the phone (even after a LOT of drivers being installed), charging the phone doesn't do anything. Regardless if I remove - put back the battery no screen, no screen in download - hard reset mode either, it's just completely black.
I'd like to have some sort of help, because I am just completely out of ideas, I really feel like a firmware change could fix the phone, but if the computer doesn't recognise it, I have no idea what to do.
Click to expand...
Click to collapse
You might be having hardware issues, such as a faulty power button. If you are the type of user that frequently presses the power button to lock/unlock the screen, this leads to excessive wear on the button components, this is why some users prefer to use the "tap to sleep" and "tap to wake" feature, to avoid wearing the power button out. On my LG, this feature is called "KnockOn", it's located in Accessibility settings.
Sent from my LGL84VL using Tapatalk
Hey everyone, I'll start by saying I'm new to these forums, so go easy...
I've had an S7 (Verizon SM-G930V) for probably 3 years, recently it randomly glitched/locked up (screen had strange color bars through what I was looking at) phone restarted and then was stuck in a boot loop. It's never been wet or dropped hard and is in really good shape. I shut it off and attempted to re-start with the same results... Got a new S20+ so I at least have a device, but I'm determined to get the lost month on the old S7 back since I had a backup from early Feb.
I tried a new battery since that was mentioned, didn't change anything, however in messing with trying to get the phone to boot have discovered a few strange message screens and behavior...
1. Phone will eventually stop responding to key presses, have to pull battery connector, wait, then it will re-boot, but every time the blue 'Recovery Mode...' is displayed. If I touch nothing, it will boot and start 'installing updates' but eventually lock and restart. At one point it made it as far as the Verizon screen, then died.
2. I can get the phone to to into the recovery menu and it will respond to commands. I've tried restart normally, boot to safe mode, and shut down phone normally, all of which result in the same restart and recovery mode message and then the lock during the update.
3. I have successfully made it to the download mode screen a few times, but don't have the knowledge of what needs to be done there and which files I would need to upload to it to make that work. (phone was totally stock rom) It had recently updated to the latest version available from Verizon which I think was 8.0?
4. Now I have found a new error screen which I have not seen before... The little Android guy has X's in his eyes and a large yellow sign with ! in it says 'No Command' and then the phone restarts? It also during that finally responded to being plugged in via USB charging, however normally it shows no signs of charging other than being warm and actually charging the battery (verified with a meter)
5. When the phone is on, it gets warm quite quickly (it's still split open and the tin covers are warm, but not hot)
Hopefully someone can help out. I wouldn't say there's anything too critical on there, but there are some pics I'd really like to have back :crying:
Thanks everyone!
bigblkyj said:
Hey everyone, I'll start by saying I'm new to these forums, so go easy...
I've had an S7 (Verizon SM-G930V) for probably 3 years, recently it randomly glitched/locked up (screen had strange color bars through what I was looking at) phone restarted and then was stuck in a boot loop. It's never been wet or dropped hard and is in really good shape. I shut it off and attempted to re-start with the same results... Got a new S20+ so I at least have a device, but I'm determined to get the lost month on the old S7 back since I had a backup from early Feb.
I tried a new battery since that was mentioned, didn't change anything, however in messing with trying to get the phone to boot have discovered a few strange message screens and behavior...
1. Phone will eventually stop responding to key presses, have to pull battery connector, wait, then it will re-boot, but every time the blue 'Recovery Mode...' is displayed. If I touch nothing, it will boot and start 'installing updates' but eventually lock and restart. At one point it made it as far as the Verizon screen, then died.
2. I can get the phone to to into the recovery menu and it will respond to commands. I've tried restart normally, boot to safe mode, and shut down phone normally, all of which result in the same restart and recovery mode message and then the lock during the update.
3. I have successfully made it to the download mode screen a few times, but don't have the knowledge of what needs to be done there and which files I would need to upload to it to make that work. (phone was totally stock rom) It had recently updated to the latest version available from Verizon which I think was 8.0?
4. Now I have found a new error screen which I have not seen before... The little Android guy has X's in his eyes and a large yellow sign with ! in it says 'No Command' and then the phone restarts? It also during that finally responded to being plugged in via USB charging, however normally it shows no signs of charging other than being warm and actually charging the battery (verified with a meter)
5. When the phone is on, it gets warm quite quickly (it's still split open and the tin covers are warm, but not hot)
Hopefully someone can help out. I wouldn't say there's anything too critical on there, but there are some pics I'd really like to have back :crying:
Thanks everyone!
Click to expand...
Click to collapse
If what you've described is correct, all of the solutions involve flashing the stock firmware which will of course wipe the device.
Were your photos not stored in a folder on the SD card?
There is a chance you can recover the device using Samsung Kies with the emergency recover option but if you've encountered the "no command" screen it's not looking good.
Unfortunately I did have an SD card installed, but I normally kept my camera pics on the phone's memory, since I have had an SD card fail as well and lost everything on there.
So this took an unexpected turn yesterday pretty much right after posting this... I've been messing with the phone, unplugging the battery each time, and have managed to get into different menus which kept making me think that something still had to be working if I could do that. Well, after leaving the No Command message on the screen it magically booted into the Recovery menu with (finally) the option to wipe the cache partition, which I did and rebooted normally. Believe it or not, it booted normally and into the OS like nothing ever happened?!
I instantly plugged it into my PC and ran Smart Switch which started taking a backup! About 25% though the device restarted again and was really warm to the touch on the RF covers inside. Bummer...
So I figured heat was now the issue for some reason... I waited for it to cool and then reinstalled the SD card and figured, if I could get it to boot long enough, the SD card is a quicker transfer and I'd just use ES File Explorer to try and do a photo dump to the SD card and see how far it would get. It actually made it all the way through and gave me enough time to grab some other stuff before getting hot and restarting again.
I believe the overheating is being caused by my opening of the device though... Currently I have the antennas removed and the speaker so that I'm able to quickly access the battery connector (which BTW seems to be the trick here to this working) But inadvertently, without the larger wireless charging coil in place, it relieved the pressure on the motherboard and broke the thermal paste connection between the chipset and the copper heatsink (I didn't tear it down further to check, but I can hear the 'sticking and peeling' when you press down on it).
I think what I'm going to do is apply pressure with a chip clip or something similar (non conductive) and see if I can grab a backup again before it restarts. After the cache wipe the phone seems to understand that it's plugged in and charging now which is a new thing as well...
Sorry for the long winded posts, but if this at all helps even one person with the same situation as I have, maybe that'll be worth getting lost in here
Samsung A21 keeps saying that I'm using the wrong pattern.
Steps taken to try and resolve:
Samsung account, find my mobile or whatever it's called. I was able to log in and see the location of the phone but when I tried to unlock, it said that remote unlock was not turned on, on the phone.
Google account: Said "notification sent" and that was it, nothing more.
Last thing I want but would do is a factory reset. Problem is, it asks for the pattern to shut down the phone.
Was going to pull the battery to shut it down, but the back is glued on and I don't want to damage the case even slightly. It's my mothers phone. If it was mine, I'd take the chance.
I'm at a freaking loss and can't believe this bug exists to this day.
Edit: I've set it to the download mode screen (the screen stays on and will drain the battery) and will let the battery die. I think, once dead, I should be able to plug in and quickly hold the buttons and get into recovery mode and reset it. Yes no maybe?
yes you can reset the phone
but you can not save the data