like the title says,
the handset wouldn't let me enter a manual pin like "0000" etc.
it automatically generates a pin and asks me to enter on the zeemote! what the #&%!?
(see the photos)
i tried Bluez IME but it tries to pair using the phone's default pairing method which is the problem in the first place.
i contacted HTC support and they apologized saying there's nothing they can do about it. what the #&%!?
please point me at a solution to force manual pin or a hack.
i've seen guys pair with this same controller from the default bluetooth settings on other phones (YouTube).
so frustrating
unfortunately, this is an issue with the HTC bluetooth stack for the sensation and evo3d.
the only game pad that works perfectly with it so far is the BGP100
http://www.dealextreme.com/p/msi-bgp100-bluetooth-gamepad-1-aaa-battery-included-13760
trust, ive tried almost every controller you can think of (including console controllers), with every possible bypass method for android, and the only one that works easily and perfectly is the BGP100...
the only downside is finding one
EDIT* the only one i havent tried, but think it will work is the iControlPad: http://icontrolpad.com/
$*1T! i already bought the zeemote!
looks like you've done your research; saved me a lot of time XD
hopefully, someone uploads a fix soon. please remember me if u find one!
ZiGi55 said:
$*1T! i already bought the zeemote!
looks like you've done your research; saved me a lot of time XD
hopefully, someone uploads a fix soon. please remember me if u find one!
Click to expand...
Click to collapse
Have you tried mobilegear.com's driver?
http://mymobilegear.com/GameProAn.php
I think you can try it out and see if it works and if it does it'll cost you 10 bux.
I bought the drivers for the i-tech bt virtual keyboard because no other bt drivers would work. Now it works perfect for 10 bux!
kpjimmy said:
Have you tried mobilegear.com's driver?
http://mymobilegear.com/GameProAn.php
I think you can try it out and see if it works and if it does it'll cost you 10 bux.
I bought the drivers for the i-tech bt virtual keyboard because no other bt drivers would work. Now it works perfect for 10 bux!
Click to expand...
Click to collapse
I tried the trial. It still tries to pair using the phone's default method so it's the same as bluez IME.
It's not a driver issue I think. It's an issue trying to connect the device in the first place.
the best fix is if HTC creates a new BT stack with a new kernel release, or if a keen dev takes a stab at it...at first it though it was a BT3.0 issue, but ive had keyboard and mice and headsets that were 1.0/2.0/2.1 that connected right away thru android...
there could be an app made that overrides the bt stack, such as the one kpjimmy posted, but most trials arent as effective as the paid versions...
you have a couple options, but none of them are free atm
Related
Well, this is not really a question or problem. But just a headsup that the Diamond works just fine with my Nokia CK-7W.
However it would also be nice to hear from you guys (and girls) as well, since I can't imagine I'm the only one with succes!
You might wonder "Why the hell do you post this?!". Well, that's simple because when I wanted to find out whether that Nokia carkit would work together with the Diamond I coulnd't find anything.
And since my experiences with Nokia carkits and HTC phones weren't all that good (read: BAD, lots of echo and weird connection problems) I was pretty anxious to give this a try.
After testing it on another CK-7W, which was already built in a car, I figured it worked perfectly so I took the plunge and got one for my car.
(Before you ask, why no parrot or other brand? I was able to get my hands on this one really cheap.)
The only problem I got was the first time I wanted to pair the device. Every time after entering the 4 digit passcode I got a message saying the passcode was incorrect. Instantly, not even trying to connect. After leaving it all alone for 10-15 minutes and I tried to connect again it suddenly worked without any problems. And it's still working with no issues at all.
ROM I use:
SWIFTBL WWE DIAMOND ROM V7.5
OS Version: CE 5.2.20755 (Build 20755 AKU 1.4.0)
Base ROM Version: 1.93.405.1 UK WWE
So.. more succes stories here? Or problems?
Hi
I have the same setup, Nokia CK-7W in my volvo s60 connected to my MDA Compact IV running swiftbldade 7.5.
It all works perfect.
I even have MS Voice command setup with it and it annonuces incoming callers and messages perfectly and voice dialling works perfect as well.
Call quality is very good as well.
Shaks
Hey - I've got my CK-7W working fine too, except I'd like to also enable wireless stereo... but the option doesn't seem to exist... I bought the CK-7W off a friend, and he was able to use wireless stereo, but I cn't - has anyone else had any success...?
Relly something I want for using TomTom, etc...
Hi i have CK-7W car kit and I am having problems getting my Diamond to pair can you please advise how you guys paired your ones?
Can't say anything more than I just used the normal way to pair, go to bluetooth settings, search for device and select the carkit + enter correct passcode.
I did however have some problems in the beginning. It would find the carkit but after entering the passcode it said pairing failed.
But when I tried later again it went without a problem, and it paired everytime without a problem ever since.
I dont think the ck-7w supports stereo audio. There are however apps that can route the audio over the carkit. BTAudio is one called if I remember correctly. That way you can have the tomtom over the carkit, but quality isn't that good really.
And some say that using that audio routing also gives 'problems' sometimes, as in it sometimes seems like there is audio (e.g. the car radio is muted) but you don't hear anything for a few secs. So that can be quite annoying.
hmmm??? My diamond wont even pick up the car kit during the search!
I had some problems pairing in the first place...
Don't try to search for the car-kit using the phone, just have your Diamond on BT visible to others, and the car-kit will try to connect automatically... I think you might need to hold the button on the car-kit down for like 10 seconds for it to search, but definately let the kit find the phone, not the other way around...
I fitted one of these to my brother in law's car the other day. Tested it with my diamond, but i expected it to be cross compatible.
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Hi Y'all,
I am using my Diamond with the nokia CK-7W and it works fine as well. Paired up without much fuss....
Riel said:
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Click to expand...
Click to collapse
Eh.. none? I find the quality better compared to my old ck3300 parrot carkit. However, this one doesnt have a small lcd display or something. Not that I missed the lcd screen though, but sure was a nice feature.
Best thing about the parrot was that it's possible to put a new firmware on it. Could make them a little bit more 'future-proof'.
Nokia CK-7W with HTC Touch Diamond2, VITO VoiceDialer
Pairing the device was easy. In coming calls are working. Push on the carkit button and I can answer the call.
The problem that I have is that I can't do a voice call. If I push on the carkit button nothing happens. I would have expected that the VoiceDialer app would be started and I could make a voice call. The VoiceDialer app works without bluetooth.
Has anyone an idea how I get voice dialing working?
Remark:
With my pervious cell phone Motorola L6 was this possible. Pushed on the carkitt button, wait on the beep, say the name, when recognized it repeats the name and the number was dialed by the phone.
I'm trying to find a way to get around the problem of Windows Mobile 6.1+ bluetooth stacks not working properly with Nissan cars with the nav system (many old threads on this around xda, ie http://forum.xda-developers.com/showthread.php?p=3858170#post3858170)
Anybody know if anybody has implemented their own bluetooth stack (or copied one from a non win-mo device) that can be loaded onto a Raphael?
Thanks!
post 114
http://forum.xda-developers.com/show...406116&page=12
that fixes the issue of headsets not being able to control programs besides tf3d and win media so it might help
lbhocky19 said:
post 114
http://forum.xda-developers.com/show...406116&page=12
that fixes the issue of headsets not being able to control programs besides tf3d and win media so it might help
Click to expand...
Click to collapse
I get a dead link there?
I've tried the work arounds of switching to the handset and back to the car (headset), but no luck there, not sure if that was the suggestion?
http://forum.xda-developers.com/showthread.php?t=406116&page=12
Is the actual link.
Did it work?
Any changes?
Yeah, any luck?
The work around works for me ... it's a bit annoying though. Shame to put a put extra money for the extras in a car only to have it not work right.
Just have to explain to people while it takes a few seconds before I can talk.
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
UPDATE 2010/03/29
a half solution is to start the car, then turn the BT on the phone, then it works perfect.
the reason why his is a HALF solution only: next time you start the car you have to start BT on the phone again ( I am used to have my BT working 24/7 )
a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
You could always buy a more expensive phone to go with that expensive accessory
Only joking
a_petrov303 said:
Hi, I am trying to get my BMW bluetooth to work with TG01
only the phonebook transfer work correctly
Jetware 1.4 did not improve anything
Please help anyone has their TG01 working with BMW?
Click to expand...
Click to collapse
Not BMW, but I have it working perfectly paired with my Ford car system. So I'd suspect is most likely a settings isue one side or the other rather than anything fundamental.
well I have noticed that it works well with newer idrive models, but mine is 2005 MY so no idrive and no luck
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
souljaboy said:
ive also heard alot of complaints like this ... not being able to read phonebook
ill try today in 2008 toyota
Click to expand...
Click to collapse
or no, the phone book is excellent
it is not being able to call or receive calls what bothers me
and as I said, it works with newer iDrive BMW
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
souljaboy said:
oh , calling/recieve works for me .. radio fades out and its good
maybe u should try bmw forum ?
Click to expand...
Click to collapse
Yes, I have tried 2 bmw forums, but they do not know about WM 6.5 much
this is my first WM phone, all the other phones worked in the same car.
I managed now to get sms to show on the screen of the car, but calls is more important
people here in HD2 forum said they exange some big (5-6 digits) number in the registry and it works for them, but I am pesimistic about this because they have different BT stack, right?
HD2 - widcomm
TG01 - MS
well it never hurts to try , just make sure u can undo it .. tho if the regkey contains "htc" somwhere it most def wont work
I have downloaded a utility for enabling rSAP profile on our phone - it did not help...I then disabled the rSAP and a miracle!!!
I managed to place 2 calls already. I hope on next connection with the car it will still work
what is this miracle program which lets you enable the rSAP? I need it too!!
youbrokeit said:
what is this miracle program which lets you enable the rSAP? I need it too!!
Click to expand...
Click to collapse
search this forum "rSAP"...but before you do a short update:
of course on next connection, nothing worked ...and I have updated to the new rom and did not install rSAP and I was able to obtain the same result...this means it has nothing to do with my previous success
this situation is driving me grazy already...I do not know why sometimes i can get it to work perfectly by just switching BT on and off.
today i have wasted many hours just turning it on and off trying to find the rule, working combination - so far it seems to work at random
and if I get it to work it works for the next call and the next...until I get out of the car. when I start the car again it does not work r-r-r...how can I take a "snapshot" of the phones state when it is working and somehow replicate this state every other time I am in the car?!!
please help me
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
souljaboy said:
try resetting ur phone , sometimes it wont pair with my bt headset nomatter what i do but a phone softreset fixes it
Click to expand...
Click to collapse
a SR does indeed fix it, but only until next disconnect...when I came to the next day it is the same story again
I refuse to believe that this just a normal thing for WM (although having for the last couple of years only blackberries, I miss their stability and auto on/off function) ...even WM cannot be THAT glitchy
anyone?
I think I am onto something here:
if the BT is switched on after I start the car, everything works perfect!
the only inconvinience now is switching BT on/off for each jorney (especially annoying during short trips with short stops - to the local shop, post office etc)
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Wondering the same. I tried Bluetooth to no avail.
+1 been trying to get some of the more talented guys on this because I would love this on my evo
Same here, my crappy TomTom can do it so why not tpad?
d94 said:
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Click to expand...
Click to collapse
Yes it can.
I have a se X10a rooted android 2.3.3 and I got it to connect. I may not have gotten the full features since I missed the pariing code and my phone must have sent a 0000 pair which was accepted.
Anyway, my phone says that there are two options, Connect and Phone audio. Incoming calls show up on the TP with the dialer interface including caller id right down to the state and country. Audio transferred properly, so the TP becomes a huge speaker phone. Outgoing calls can be dialed and my phone asks if it should use skype or the dialer (as its' set up that way), but this doesn't seem to be working totally as there is a fail message that shows up on the TP saying 'unable to connect' or 'dial directly from your phone' when using contacts. I was able to dial my Google Voice mailbox.
I had to go from WebOS to Other a few times to get it find the phone. Just selecting Scan wasn't enough. I have Uberkernal (the latest as of this date 9/10/11).
I was also able to connect my SE D980 stereo bt headset but it only recognized it as headset not a phone device. The unit has music track controls on it and they work fine with the standard Music app and don't work with the AudiophileHD app. Track forward and back, stop/start.
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
There's a precentral thread devoted to it: http://forums.precentral.net/hp-touchpad/295862-first-non-webos-phone-fully-tetherd-hp-touchpad.html
I was able to pair it with my Droid, but can only use the TouchPad as a bluetooth headset. I can also dial with the TouchPad, but I have to use the phone to activate the TouchPad as a headset.
omario31 said:
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
Click to expand...
Click to collapse
I've got a DHD as well but running MIUI V4. I wasn't expecting it to work but just messing around, I thought I'd pair it in WebOS and it worked without a problem. I can even make calls from the touchpad without touching my phone. It should pair as a headset normally. It didn't work with my LG KC910 though.
*EDIT*
My mistake. It paired and made calls with my LG, no problem at all. Nothing worked under Android though, just file transfers.
Sent from my TouchPad on CM9
Hi, I'm not able to transfert the phonebook from the phone to the Bluetooth car kit. It seems to start transfert but never end. Whit the Sensation and the same car kit no problem.
Any idea to risolve?
Do you click and allow the prompt on the phone to allow the phonebook connection to start, you only get this prompt the first time the devices connect after pairing. You may need to delete the pairing information and start again to see this prompt again!
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Same ty[e of problem with BT Car stereo
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Fairmile said:
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Click to expand...
Click to collapse
Interesting cause I have Sony DSX-S300BTX myself. if Bluetooth doesn't work on this, I will buy Galaxy Nexus instead. I stream music in my car most of the time.
I had a quite similar issue with a Seat Altea car. It was starting the sync, and arriving at 160 contacts it just hang.
I solved it by making some cleanup and by selecting only the required address book in thé htc contact list...
Sent from my HTC One S using XDA
nnvesp said:
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Click to expand...
Click to collapse
I am having exactly the same issue!
debabratadey said:
I am having exactly the same issue!
Click to expand...
Click to collapse
Me too with the built in bluetooth system in my Mitsubishi. Old HTC legend worked without any issues.
Any further solutions?
Thanks.