pairing touchpad with non-hp phone? - WebOS Software and Hacking General

just wondering if its possible to change the code on device to allow pairing with non palm handets?

Wondering the same. I tried Bluetooth to no avail.

+1 been trying to get some of the more talented guys on this because I would love this on my evo

Same here, my crappy TomTom can do it so why not tpad?

d94 said:
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Click to expand...
Click to collapse
Yes it can.
I have a se X10a rooted android 2.3.3 and I got it to connect. I may not have gotten the full features since I missed the pariing code and my phone must have sent a 0000 pair which was accepted.
Anyway, my phone says that there are two options, Connect and Phone audio. Incoming calls show up on the TP with the dialer interface including caller id right down to the state and country. Audio transferred properly, so the TP becomes a huge speaker phone. Outgoing calls can be dialed and my phone asks if it should use skype or the dialer (as its' set up that way), but this doesn't seem to be working totally as there is a fail message that shows up on the TP saying 'unable to connect' or 'dial directly from your phone' when using contacts. I was able to dial my Google Voice mailbox.
I had to go from WebOS to Other a few times to get it find the phone. Just selecting Scan wasn't enough. I have Uberkernal (the latest as of this date 9/10/11).
I was also able to connect my SE D980 stereo bt headset but it only recognized it as headset not a phone device. The unit has music track controls on it and they work fine with the standard Music app and don't work with the AudiophileHD app. Track forward and back, stop/start.

hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.

There's a precentral thread devoted to it: http://forums.precentral.net/hp-touchpad/295862-first-non-webos-phone-fully-tetherd-hp-touchpad.html
I was able to pair it with my Droid, but can only use the TouchPad as a bluetooth headset. I can also dial with the TouchPad, but I have to use the phone to activate the TouchPad as a headset.

omario31 said:
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
Click to expand...
Click to collapse
I've got a DHD as well but running MIUI V4. I wasn't expecting it to work but just messing around, I thought I'd pair it in WebOS and it worked without a problem. I can even make calls from the touchpad without touching my phone. It should pair as a headset normally. It didn't work with my LG KC910 though.
*EDIT*
My mistake. It paired and made calls with my LG, no problem at all. Nothing worked under Android though, just file transfers.
Sent from my TouchPad on CM9

Related

Nokia CK-7W with Diamond, it works!

Well, this is not really a question or problem. But just a headsup that the Diamond works just fine with my Nokia CK-7W.
However it would also be nice to hear from you guys (and girls) as well, since I can't imagine I'm the only one with succes!
You might wonder "Why the hell do you post this?!". Well, that's simple because when I wanted to find out whether that Nokia carkit would work together with the Diamond I coulnd't find anything.
And since my experiences with Nokia carkits and HTC phones weren't all that good (read: BAD, lots of echo and weird connection problems) I was pretty anxious to give this a try.
After testing it on another CK-7W, which was already built in a car, I figured it worked perfectly so I took the plunge and got one for my car.
(Before you ask, why no parrot or other brand? I was able to get my hands on this one really cheap.)
The only problem I got was the first time I wanted to pair the device. Every time after entering the 4 digit passcode I got a message saying the passcode was incorrect. Instantly, not even trying to connect. After leaving it all alone for 10-15 minutes and I tried to connect again it suddenly worked without any problems. And it's still working with no issues at all.
ROM I use:
SWIFTBL WWE DIAMOND ROM V7.5
OS Version: CE 5.2.20755 (Build 20755 AKU 1.4.0)
Base ROM Version: 1.93.405.1 UK WWE
So.. more succes stories here? Or problems?
Hi
I have the same setup, Nokia CK-7W in my volvo s60 connected to my MDA Compact IV running swiftbldade 7.5.
It all works perfect.
I even have MS Voice command setup with it and it annonuces incoming callers and messages perfectly and voice dialling works perfect as well.
Call quality is very good as well.
Shaks
Hey - I've got my CK-7W working fine too, except I'd like to also enable wireless stereo... but the option doesn't seem to exist... I bought the CK-7W off a friend, and he was able to use wireless stereo, but I cn't - has anyone else had any success...?
Relly something I want for using TomTom, etc...
Hi i have CK-7W car kit and I am having problems getting my Diamond to pair can you please advise how you guys paired your ones?
Can't say anything more than I just used the normal way to pair, go to bluetooth settings, search for device and select the carkit + enter correct passcode.
I did however have some problems in the beginning. It would find the carkit but after entering the passcode it said pairing failed.
But when I tried later again it went without a problem, and it paired everytime without a problem ever since.
I dont think the ck-7w supports stereo audio. There are however apps that can route the audio over the carkit. BTAudio is one called if I remember correctly. That way you can have the tomtom over the carkit, but quality isn't that good really.
And some say that using that audio routing also gives 'problems' sometimes, as in it sometimes seems like there is audio (e.g. the car radio is muted) but you don't hear anything for a few secs. So that can be quite annoying.
hmmm??? My diamond wont even pick up the car kit during the search!
I had some problems pairing in the first place...
Don't try to search for the car-kit using the phone, just have your Diamond on BT visible to others, and the car-kit will try to connect automatically... I think you might need to hold the button on the car-kit down for like 10 seconds for it to search, but definately let the kit find the phone, not the other way around...
I fitted one of these to my brother in law's car the other day. Tested it with my diamond, but i expected it to be cross compatible.
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Hi Y'all,
I am using my Diamond with the nokia CK-7W and it works fine as well. Paired up without much fuss....
Riel said:
Bit offtopic, but what's the advantage compared with a just as pricy parrot system?
Click to expand...
Click to collapse
Eh.. none? I find the quality better compared to my old ck3300 parrot carkit. However, this one doesnt have a small lcd display or something. Not that I missed the lcd screen though, but sure was a nice feature.
Best thing about the parrot was that it's possible to put a new firmware on it. Could make them a little bit more 'future-proof'.
Nokia CK-7W with HTC Touch Diamond2, VITO VoiceDialer
Pairing the device was easy. In coming calls are working. Push on the carkit button and I can answer the call.
The problem that I have is that I can't do a voice call. If I push on the carkit button nothing happens. I would have expected that the VoiceDialer app would be started and I could make a voice call. The VoiceDialer app works without bluetooth.
Has anyone an idea how I get voice dialing working?
Remark:
With my pervious cell phone Motorola L6 was this possible. Pushed on the carkitt button, wait on the beep, say the name, when recognized it repeats the name and the number was dialed by the phone.

Voice Command + bluetooth headset

Searched, but no results for this problem. I have Alltel, Touch Pro. Connect to bluetooth headset is fine. Calls ring in, talk, hang up all ok. Cannot initiate a voice command call either thru contacts nor by the phone number. Acts like it wants to, but then does nothing. Motorola H680, which lists the Alltel Touch Pro as compatable. If I manually dial using the phone touch screen, works ok.
Solution
Found a 3td party app that works for my setup.
http://www.jetwaremobile.com/index.htm
$14.95, 30 day free trial so I tested before buying.
They were not too clear on this, so if someone else uses it, you say "call" to bring up a contact, and "dial" to have phone dial a phone number you supply.
hth
You shouldn't need the add-on software. If you look at the advanced information on the BT screen for your headset, what profiles does it show and which ones are checked.
I'm using a Plantronics Discovery 655/665 (same headset) and don't have any issues with VC initiating.
TP Hands free is not an option for this or any headset with Alltel. At least, that is what HTC support said. Are you with Alltel and HTC got that wrong? Taking support for its word, didn't figure to go buy n try different headsets other than the ones we already own and know works on other phones. 'Tis why I posted here, hoping there might be a reg hack someone knew about. Then got HTC email reply saying Alltel did not activate that service for the TP. Alltel support has been zilch on this subject. btw, HTC email support has been pretty good, usually within a few hours during workdays.
Have a look at this thread; it includes supporting posts on how to get the most out of MS VoiceCommand ... including Bluetooth.
http://forum.xda-developers.com/showthread.php?t=520991
HTH,
Hi
I have problem with bluetooth headset. I have Nokia BH-108 bluetooth headset, when I call to somebody everything works fine, but somebody is calling to me headset does not work. Maybe somebody know the solution?
PerfAlbion said:
You shouldn't need the add-on software. If you look at the advanced information on the BT screen for your headset, what profiles does it show and which ones are checked.
Click to expand...
Click to collapse
Sorry to answer so late. Yes, BT profile was set to Hands Free.

Parrot CK3000 evolution car kit

Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco
have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.
I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software
I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.
I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon
In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco
the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit
danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?
doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think
I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.

Problem with Bluetooth Car kit

Hi, I'm not able to transfert the phonebook from the phone to the Bluetooth car kit. It seems to start transfert but never end. Whit the Sensation and the same car kit no problem.
Any idea to risolve?
Do you click and allow the prompt on the phone to allow the phonebook connection to start, you only get this prompt the first time the devices connect after pairing. You may need to delete the pairing information and start again to see this prompt again!
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Same ty[e of problem with BT Car stereo
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Fairmile said:
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Click to expand...
Click to collapse
Interesting cause I have Sony DSX-S300BTX myself. if Bluetooth doesn't work on this, I will buy Galaxy Nexus instead. I stream music in my car most of the time.
I had a quite similar issue with a Seat Altea car. It was starting the sync, and arriving at 160 contacts it just hang.
I solved it by making some cleanup and by selecting only the required address book in thé htc contact list...
Sent from my HTC One S using XDA
nnvesp said:
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Click to expand...
Click to collapse
I am having exactly the same issue!
debabratadey said:
I am having exactly the same issue!
Click to expand...
Click to collapse
Me too with the built in bluetooth system in my Mitsubishi. Old HTC legend worked without any issues.
Any further solutions?
Thanks.

[Q] Bluetooth for Car Hands Free Calling

I have a Standard Tesco 16GB Moto G, and a Vauxhall Insignia with Factory fitted bluetooth for hands free use.
The Moto G pairs fine, but functionality is limited. Missing are:
Use of the steering wheel/dashboard controls
No phone book entries
No call lists
Call lists are generated when using the phone in the car, but are lost when bluetooth is disconnected.
Audio is fine over the car speakers, and radio is muted etc.
I have to start, end and accept calls using the handset.
I am never asked the question after pairing that the car wants access to my phone book & call history.
My previous Orange San Diego worked flawlessly in all respects with the car.
I've searched and found many other instances where there are similar problems with most Nexus, and many HTC & Samsung devices. The workarounds vary, but none have worked for me so far.
Anyone cracked it for the Moto G?
The other threads imply it's an Android thing rather than device specific, so might I be waiting for KitKat?
Don't have too much hope, as the older threads were hoping Jelly Bean would fix it, but never did.
Any update on this? I have similar problems although after re-pairing a few times I at least can answer a call with steering wheel controls but cannot hang up one?
I also have this exact same problem with a Vauxhall Astra and would be keen for an answer on how to fix this.
(I have a colleague with a Kia and his phone connects and can be used perfectly so maybe it's a Vauxhall problem?)
Update:
After unpairing and connecting again it seems fine now most of the time. Although sometimes my car will be able to see the phone call history and sometimes not.
Sent from my XT1032 using Tapatalk
Hi,
I have almost the same issue, with a Vauxhall Astra '12:
- I can call someone using bluetooth, works but I can not end the call
- If someone calls me, it's mostly displayed on the screen -> I can answer, but then the audio doesn't work so I need to phone by hand..
- I manage to get into the phone book & see numbers, but can not dial them
This worked fine on my previous S3 mini & on some older (non-smartphone) phones.
Update
After repeated pairing and deleting the pairing I was finally asked by the phone if the car could have access to my phonebook etc and so I said yes (don't forget to tick the don't ask again box!)
The phonebook now appeared in the car, but I couldn't select one and successfully dial it - only from the phone itself. No Call lists.
If I made, or received a call whist connected, I got full functionality via the console and steering wheel controls afterwards, in fact everything perfect.
As a workaround, once the phone has paired with the car I either dial myself or 0000 (from the Handset), and after a minute or so, the call lists load and I get full functionality.
If I turn off the ignition, then I have to start from scratch i.e. dial 0000 or anything.
So a partial cure, but still a pain.
I am following a thread from a developer who offers a Bluetooth phone book transfer App, but unfortunately it doesn't work with the Moto G yet. He has now bought himself a Moto G so hopefully he will crack it. If and when he does, there will be £1.19 of mine winging his way i can tell you!
I can't post a link to this but search for android rsap and look under Motorola phones in his forum.
Good luck guys.
got the same problem here, was reading older modded roms work, anyone tried a rom that works ?
This sounds like the problem is with the car's bluetooth kit, because my Moto G works flawlessly with the Parrot kit in my Mondeo.
Sent from my XT1032 using Tapatalk

Categories

Resources