Hi, I'm not able to transfert the phonebook from the phone to the Bluetooth car kit. It seems to start transfert but never end. Whit the Sensation and the same car kit no problem.
Any idea to risolve?
Do you click and allow the prompt on the phone to allow the phonebook connection to start, you only get this prompt the first time the devices connect after pairing. You may need to delete the pairing information and start again to see this prompt again!
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Same ty[e of problem with BT Car stereo
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Fairmile said:
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Click to expand...
Click to collapse
Interesting cause I have Sony DSX-S300BTX myself. if Bluetooth doesn't work on this, I will buy Galaxy Nexus instead. I stream music in my car most of the time.
I had a quite similar issue with a Seat Altea car. It was starting the sync, and arriving at 160 contacts it just hang.
I solved it by making some cleanup and by selecting only the required address book in thé htc contact list...
Sent from my HTC One S using XDA
nnvesp said:
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Click to expand...
Click to collapse
I am having exactly the same issue!
debabratadey said:
I am having exactly the same issue!
Click to expand...
Click to collapse
Me too with the built in bluetooth system in my Mitsubishi. Old HTC legend worked without any issues.
Any further solutions?
Thanks.
Related
Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco
have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.
I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software
I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.
I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon
In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco
the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit
danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?
doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think
I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.
Hey guys
Strange issue here. I paired my phone with my car through Bluetooth to make and receive calls using the car audio system. It works well.
However, if I fire Google Navigation, I can't here the spoken instructions through either the phone speaker or the car speakers.
I was not expecting navigation audio to be routed through Bluetooth audio, but I did expect the navigation instructions to come out of the phone speaker, as it does on the nexus one or the vibrant both running Android 2.2.
Is anybody else having this issue?
Thanks
Sent from my Nexus S using XDA App
bluetooth wont turn on
It just flashes the icon and does not turn on. From in settings same. Any ideas?
vapor311 said:
It just flashes the icon and does not turn on. From in settings same. Any ideas?
Click to expand...
Click to collapse
did you flash a new kernel or anything because the kernel in the dev thread is known to break bluetooth
if it does this stock out of the box try doing a system restore and then take it back if its still acting up because bluetooth should turn on
yea i used the pkg one that had SU etc on it. Suppose Ill have to flash back to stock arg.
just so peeps know with the bt issue flashing this fixed
http://forum.xda-developers.com/showthread.php?t=882333
Anyone?
Sent from my Nexus S using XDA App
Locking up slash rebooting while streaming bluetooth audio
Anyone else experiencing any sort of lockups rebooting streaming bluetooth audio. It seems like I can only get about 10 to 15 minutes streaming audio before the phone becomes completely unresponsive won't power on or anything
Sent from my Nexus S using XDA App
You should be thankful...I can't get more then 10 sec without it being cut off and play again...for...10 sec
what rom?
I had same issue once...i on CM7
Bluetooth doesn't stream audio to car - what's your experience
I've got a Ford Edge with the new Ford MyTouch/Sync system.
The Nexus S connects to the Bluetooth just fine; makes and receives calls perfectly. It will also connect to the Bluetooth Audio Stream for music playback, but won't play the audio over the car's speakers. Also, sometimes it connects, holds the connection for just a few seconds and then disconnects. My SGS and Nexus One work as expected, as does the iPhone, so it doesn't appear to be an issue with the car.
Seems like a bug in the NS to me.
I'm curious if others are streaming audio/music to their auto's BT system without issues?
It would be especially nice to know what anyone else with a new Ford/Lincoln is experiencing, but I'd also like to compile a list of what cars work and what don't.
I'm going to have to find some other BT device that I can test the stream on to see if my phone works with it or not. Maybe my Nexus One dock? I've never used that to stream audio even with the Nexus One.
In terms of troubleshooting my problem, I've already rebooted the phone and the car, un-paired and re-paired the phone with the car.
I've got a Mazda RX8 R3 and the NS will pair with the in-built car BT but drops the connection after a few minutes. It then refuses to connect again unless I re-pair, then a few minutes later it drops and we're back to square one.
The car's in-built BT worked fine with my HTC Desire, Hero, iPhone 3G and Blackberry 9700 so I'm guessing the Nexus S has a Bluetooth issue.
Mine works fine on my aftermarket Sony receiver.
having issues with bluetooth audio too, stream keeps breaking every now and then. Any fixes?
I've only streamed to the car stereo and had no issues. The phone is only about 10cms away.
Haven't tried my BT headphones yet, maybe range is the issue.
*On original ROM.
Mujja said:
I've only streamed to the car stereo and had no issues. The phone is only about 10cms away.
Haven't tried my BT headphones yet, maybe range is the issue.
*On original ROM.
Click to expand...
Click to collapse
tried placing the phone right next the the BT reciever and same problem. Only tried this once, maybe I'll try rebooting the phone.
no problem here
using Bionix 1.2
You're lucky, I can't even get BT music streaming to work with my car. No other BT devices to check with besides my Nexus One dock, which has no speakers.
BT works great for the phone, though, to make and receive calls.
Problem with Bluetooth
I cant get to work bluetooth on Nexus S.
When i enable it and try to send something from SGS to Nexus S it says me "This tranfer was canceled by the user" (Nexus S)
SGS says "Remote device rejected your request"
When i try send something from Nexus S, but use not function Send, i use function Bluetooth - it says me "The application Bluetooth Share (process com.android.bluetooth) has stopped unexpectedly. Please try again"
I tried factory reset, wipe cache, tried flash any other roms, but got NOTHING helpt me. I have this problem on 2 phones (2xNS).
Can someone give me files of BlueTooth share? (com.android.bluetooth)
That's an interesting problem you have. Mine did the same thing transfering from my computer to my NS. I just tried it again when I read your post (to make completely sure what the error was) and it has automagically fixed its self.
Well, seems i need a file \system\app\bluetooth.apk
Does anyone have problems connecting their Desire S to Bluetooth devices?
My phone seems to pair to my Bluetooth hands free kit but no connection actually happens. The same situation for another Bluetooth kit i have and also my laptop!
I just upgraded from a normal Desire and it worked perfectly with all the devices.
I tried changing the radio and also upgraded the Rom from 1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11
to
1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03
I have searched for solutions but have not found any on XDA
Might be that your bluetooth device is in a black list need to check, can yo utell what bluetooth device you have exactly?
superkid said:
Might be that your bluetooth device is in a black list need to check, can yo utell what bluetooth device you have exactly?
Click to expand...
Click to collapse
My main Bluetooth device is a Merlin Car Mirror Kit V2.
When connected and properly paired it should 'beep' twice, but now it just connects and the phone says its paired. When you make a call it shows it is dialling but no sound comes through both ways.
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Wondering the same. I tried Bluetooth to no avail.
+1 been trying to get some of the more talented guys on this because I would love this on my evo
Same here, my crappy TomTom can do it so why not tpad?
d94 said:
just wondering if its possible to change the code on device to allow pairing with non palm handets?
Click to expand...
Click to collapse
Yes it can.
I have a se X10a rooted android 2.3.3 and I got it to connect. I may not have gotten the full features since I missed the pariing code and my phone must have sent a 0000 pair which was accepted.
Anyway, my phone says that there are two options, Connect and Phone audio. Incoming calls show up on the TP with the dialer interface including caller id right down to the state and country. Audio transferred properly, so the TP becomes a huge speaker phone. Outgoing calls can be dialed and my phone asks if it should use skype or the dialer (as its' set up that way), but this doesn't seem to be working totally as there is a fail message that shows up on the TP saying 'unable to connect' or 'dial directly from your phone' when using contacts. I was able to dial my Google Voice mailbox.
I had to go from WebOS to Other a few times to get it find the phone. Just selecting Scan wasn't enough. I have Uberkernal (the latest as of this date 9/10/11).
I was also able to connect my SE D980 stereo bt headset but it only recognized it as headset not a phone device. The unit has music track controls on it and they work fine with the standard Music app and don't work with the AudiophileHD app. Track forward and back, stop/start.
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
There's a precentral thread devoted to it: http://forums.precentral.net/hp-touchpad/295862-first-non-webos-phone-fully-tetherd-hp-touchpad.html
I was able to pair it with my Droid, but can only use the TouchPad as a bluetooth headset. I can also dial with the TouchPad, but I have to use the phone to activate the TouchPad as a headset.
omario31 said:
hello,
it doesn't work with my DHD 2.3.4
when looking for a device on my phone the TP isn't found...
& neither when looking for a device from the TP the DHD isn't found.
Click to expand...
Click to collapse
I've got a DHD as well but running MIUI V4. I wasn't expecting it to work but just messing around, I thought I'd pair it in WebOS and it worked without a problem. I can even make calls from the touchpad without touching my phone. It should pair as a headset normally. It didn't work with my LG KC910 though.
*EDIT*
My mistake. It paired and made calls with my LG, no problem at all. Nothing worked under Android though, just file transfers.
Sent from my TouchPad on CM9
I'm having a problem with mine. I have a Grom adapter in my 2004 Volvo S60R. It constantly skips tracks with my One X. It's like i'm holding down the next track button endlessly. Anyone else experiencing this with bluetooth? I'm contacting Grom Audio support when they open in a few hours, but until then I figured i'd check here.
I am using it on my Mercedes and it works fine; no issues.
bimmerd00d said:
I'm having a problem with mine. I have a Grom adapter in my 2004 Volvo S60R. It constantly skips tracks with my One X. It's like i'm holding down the next track button endlessly. Anyone else experiencing this with bluetooth? I'm contacting Grom Audio support when they open in a few hours, but until then I figured i'd check here.
Click to expand...
Click to collapse
I have a feeling people will have a lot of BT issues. There was another post here on XDA that I responded to about it. The bottom line is if you can update your firmware on the BT unit you are connecting to see if there is a update. Other wise make sure whatever you want to stream audio/music from or through (AD2P) is the first thing you pair even if it is not the main thing you use as some units (or maybe the hox) will limit streaming to the primary device with is determined as the first thing you connect to.
I've been using the one built into my subaru and it works perfectly.
Valdeck said:
I have a feeling people will have a lot of BT issues. There was another post here on XDA that I responded to about it. The bottom line is if you can update your firmware on the BT unit you are connecting to see if there is a update. Other wise make sure whatever you want to stream audio/music from or through (AD2P) is the first thing you pair even if it is not the main thing you use as some units (or maybe the hox) will limit streaming to the primary device with is determined as the first thing you connect to.
Click to expand...
Click to collapse
Interesting, i have a separate a2dp and phone calls device. My car came with the phone bluetooth kit and i had to add one for a2dp.
Duplicate thread. Please use this thread. Thanks. Thread closed.