Database Info

Parrot CK3000 evolution car kit

Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco

have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.

I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software

I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.

I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...

I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.

I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon

In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco

the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit

danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?

doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.

danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think

I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.

Unable to Pair HTC Inspire with Bluetooth Device

Hi
I recently rooted my Inspire and I'm unable to pair my Bluetooth (Plantronics Explorer 210) with My Phone..don't even 'see' the device after 'Scan for Devices'..
I have an old Nokia set and the same Bluetooth is 'pairing properly ' with that ! So,the problem seems to be with teh new 'Inspire'--don't know what
My HTC Inspire Software details are:
Android version 2.3.3
HTC Sense Version 2.1
Baseband Version
12.56.60.25p_26.10.04.03_M
Kernel Version
2.6.35.13-UNITY-V4-gfbc0b87-dirty
[email protected]#2
Mon Jul 25 05:41:15 KRAST 2011
Build Number
2.47.502.7 CL93396 release-keys
Software Number
RumRunner 3.0 RC2
Browser Version
Webkit/533.1
-------------
Do I need to Flash another Radio/ROM?
Thanks in advance for your Help....

Did you put the bluetooth in pairing mode? Guessing you did but just making sure. That process is overlooked so many times.

Hi
I don't think this so..as the same Bluetooth works with another NOKIA set !

surechim said:
Hi
I don't think this so..as the same Bluetooth works with another NOKIA set !
Click to expand...
Click to collapse
Strangely,..my HTC pairs properly with my Laptop !
The Bluetooth device too pairs with another Nokio Mobile...But the Blutooth device is not even Detected by HTC Inspire
Does this input give any input to solve this issue?

as i asked in the other thread, what device are you trying to pair with the HTC?
i have no problems with a number of devices i have tested now.
i have several phones that i have tested pairing with
my car
pulled the blueant out of a box and tested that
have a jawbone and a plantronics
couple of laptops
all paired fine with bluetooth

Pirateghost said:
as i asked in the other thread, what device are you trying to pair with the HTC?
i have no problems with a number of devices i have tested now.
i have several phones that i have tested pairing with
my car
pulled the blueant out of a box and tested that
have a jawbone and a plantronics
couple of laptops
all paired fine with bluetooth
Click to expand...
Click to collapse
Hi Pirateghost
I'm trying to Pair my 'Bluetooth Headset (Plantronics Explorer 210)' with the HTC Inspire ..This device is not even detected by HTC when I do the 'scan for devices' from the Phone...but,I see the Bluetooth symbol dispalyed onteh phone...
Also this Bluetooth Headset is properly 'pairing' with my another Nokia Phone...
Further my HTC also 'pairs' properly with my Laptop'...
But the HTC doesn't detect the 'Bluetooth Planatronics' Headset!

it's Plantronics Explorer 210 Bluetooth Headset
....But this headset pairs properly with my 'Old Nokia phone'..but refuses to pair with the new HTC Inspire
But,the HTC Inspire pairs properly with my 'Laptop computer'...I'm reallyconfused..what's wrong...Appreciate your thoughts on this

I asked you earlier if you put the bluetooth in pairing mode before trying to pair with it? Not the same thing as pairing your phone to a laptop or using it with a phone that it is already paired to. First time you turn on bluetooth it goes in auto pairing till it is paired with a device. After it is paired with a device you must do something special to get it paired again with a new device. Again I only bring this point back up because this sounds like the only reason your phone cannot see the bluetooth.
How to Pair Your Headset if it Has Been Previously Paired
With Another Device
1 Turn the headset off.
Press and hold the call control button until the indicator turns red
and then turns off.
2 Turn the headset on.
Press and hold the call control button until the indicator light
continues to flash red and blue. The headset is now in pairing mode.
3 Use the commands on your phone to locate your headset.
For most phones, select Settings/Tools > Connections > Bluetooth
> Search > 2XXPlantronics. See your phone’s user guide for more
information.
4 When prompted for the passkey, enter 0000.
Pairing is successful when the indicator on your headset flashes
blue. Your headset is now connected and ready to use.

Agoattamer said:
I asked you earlier if you put the bluetooth in pairing mode before trying to pair with it? Not the same thing as pairing your phone to a laptop or using it with a phone that it is already paired to. First time you turn on bluetooth it goes in auto pairing till it is paired with a device. After it is paired with a device you must do something special to get it paired again with a new device. Again I only bring this point back up because this sounds like the only reason your phone cannot see the bluetooth.
How to Pair Your Headset if it Has Been Previously Paired
With Another Device
1 Turn the headset off.
Press and hold the call control button until the indicator turns red
and then turns off.
2 Turn the headset on.
Press and hold the call control button until the indicator light
continues to flash red and blue. The headset is now in pairing mode.
3 Use the commands on your phone to locate your headset.
For most phones, select Settings/Tools > Connections > Bluetooth
> Search > 2XXPlantronics. See your phone’s user guide for more
information.
4 When prompted for the passkey, enter 0000.
Pairing is successful when the indicator on your headset flashes
blue. Your headset is now connected and ready to use.
Click to expand...
Click to collapse
Thanks Agoattamer ---I totally overlooked it--Perhaps did not have the old Planatronics manual----and after getting into 'pairing mode'--everything is perfect..
--------------------
Hi Pirateghost
I think,I had been too 'stupid' to overlook this 'pairing step'....and now the HTC is able to connect---Thanks a lot for your time......
Appreciate your help too...for giving such a good 'ROM'
-------------------
Best Regards

Problem with Bluetooth Car kit

Hi, I'm not able to transfert the phonebook from the phone to the Bluetooth car kit. It seems to start transfert but never end. Whit the Sensation and the same car kit no problem.
Any idea to risolve?

Do you click and allow the prompt on the phone to allow the phonebook connection to start, you only get this prompt the first time the devices connect after pairing. You may need to delete the pairing information and start again to see this prompt again!

Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?

Same ty[e of problem with BT Car stereo
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian

Fairmile said:
I can't even get my One to see my Sony BT car stereo- HTC diesre was fine and streamed music and calls perfectly.
Have googled aroudn this issue but can't seem to find a good answer.
Ian
Click to expand...
Click to collapse
Interesting cause I have Sony DSX-S300BTX myself. if Bluetooth doesn't work on this, I will buy Galaxy Nexus instead. I stream music in my car most of the time.

I had a quite similar issue with a Seat Altea car. It was starting the sync, and arriving at 160 contacts it just hang.
I solved it by making some cleanup and by selecting only the required address book in thé htc contact list...
Sent from my HTC One S using XDA

nnvesp said:
Yes, I allow the transfer of phone book just after pairing and I see the indication "phone book transfer" on display of car systems but it never ends and no contact is transfered to systems car. With same procedure the sensation works perfectly. Probably there is something on bluetooh 4.0 that is different from 3.0 implemented on Sensation. Very strange because BT 4.0 is mainly focused on energy saving and should be compatibile with previous release.
Anyone has the same issue?
Click to expand...
Click to collapse
I am having exactly the same issue!

debabratadey said:
I am having exactly the same issue!
Click to expand...
Click to collapse
Me too with the built in bluetooth system in my Mitsubishi. Old HTC legend worked without any issues.
Any further solutions?
Thanks.

[Q] Unable to pair to bluetooth car system

Hi.
Have read around the forum a little, and haven't found much info in regard to the problem I'm having...
Am currently using the Opensensation Rom from 13/05/2012...
I am unable to connect bluetooth to my car's handsfree bluetooth audio... I tried connecting it to a blackberry and my laptop, and worked fine. However, it connected in a different way to normal. Normally, I've had it ask for pin number, and put in the default 0000. However, on the blackberry, it came up saying something along the lines of "device trying to connect, number 2837346". On the phone, it said "ensure the number on other phone is 2837346" or whatever.
When I connect to the bluetooth in car, it says "Couldn't pair with Ford Audio because of an incorrect PIN or passkey". But, as said, it doesn't ask me to enter the passkey...
So, any ideas of what the problem is, or how I can solve it? Tried changing the radio to see if that would help, but no difference...
Please help me get this sorted. Need the handsfree for phone, and only just got this phone... All other phones previously have worked.

Well, it appears that this is a problem with the ROM itself, as using another ROM (Revelation HD 6.6.4 XE), and it pairs fine with my car bluetooth...

[Q] bluetooth pairing issue, how to solve?

Hello, so i bougth this great phone, but bluetooth pairing(+autoconnect) is not working at all.
So to the proplem. My opo IS paired with my alpine car stereo, but everytime i go to my car opo asks IF i want to pair it...and obviously it should just connect automatically since i have paired it earlier but no.
Is this some known issue with opo or my device just making me headtache?
IF anyone have had same proplems i would love to hear how you managed to fix it.
PS. All my old phones automatically connected to car stereo after pairing once, so its most definatly opo issue and not the alpine stereo.

Okey, i got this solved by doing 2 things, but because im stupid and didnt test it between these actions i cqnt say which one did the job or was both needed.
1. I cleared "paired devices memory" from my alpine stereo.
2. I cleared paired device list from my handset(opo)
Hope this will help someone else in future who got proplems with alpine receiver and opo.

Problem solved! bluetooth pairing and buffering issues
Hey problem solved
I had bluetooth pairing and buffering problems and now everything works perfectly. what I did was flash OPO_OxygenOS_1_0-modem-flashable.zip (you can find it somewhere in google docs..don't remember the link)
anyway after doing that everything works perfectly.
I am running cyanogen 12.1 nightly build from 20150601
then I flashed the modem.
makkeonmies said:
Hello, so i bougth this great phone, but bluetooth pairing(+autoconnect) is not working at all.
So to the proplem. My opo IS paired with my alpine car stereo, but everytime i go to my car opo asks IF i want to pair it...and obviously it should just connect automatically since i have paired it earlier but no.
Is this some known issue with opo or my device just making me headtache?
IF anyone have had same proplems i would love to hear how you managed to fix it.
PS. All my old phones automatically connected to car stereo after pairing once, so its most definatly opo issue and not the alpine stereo.
Click to expand...
Click to collapse

oohh
AlonAsh said:
Hey problem solved
I had bluetooth pairing and buffering problems and now everything works perfectly. what I did was flash OPO_OxygenOS_1_0-modem-flashable.zip (you can find it somewhere in google docs..don't remember the link)
anyway after doing that everything works perfectly.
I am running cyanogen 12.1 nightly build from 20150601
then I flashed the modem.
Click to expand...
Click to collapse
Technical solution...too much ?

Hello All,
I too was facing issue with the Bluetooth connectivity. My headphone "Jabra Halo Smart" worked perfectly fine with other android devices but my OnePlus One. Issue i faced was that my at times my headphone would get detected but the headphone controls wont work. It was really irritating as i could not use the functionality of my headphones.
What i did was went into the Bluetooth options. Clicked on the setting icon beside my headphone and unchecked and rechecked the options.
Another action i performed was un-pairing the Bluetooth headphones from my device and resetting my headphones paired setting.
Third option was resetting the Jabra app that i installed on my mobile.
Fourth action is restarting your OnePlus device.
The above actions i performed in different orders. So one of them should surely help.
Suggestion provided by OnePlus Call Center: (which i did not need to try )
--> switch off the device
--> Press power+vol down button simultaneously
--> Select English language
--> wipe cache partition
--> wipe cache
--> reboot device
Advice while using Bluetooth headphones or speakers (especially Bluetooth devices having the functionality to connect multiple devices)...switch off the Bluetooth device and then switch off the Bluetooth of the host device (mobile, laptop, etc) and then connect the Bluetooth device to the other host device
Do not keep two host devices Bluetooth on...at times it causes to store the connection setting in the cache causing the Bluetooth device to act strangely. :cyclops: :cyclops: :cyclops: