Database Info

Bluetooth headset

Hi,
I have a question about bluetooth on my Cruise. I have a bluetooth Headset "Logitech Mobile Freedom Headset" (bluetooth 1.2 and no a2dp).
My problem is that it is not detected by my phone.
Is there a way to do it works ?
Thanks

I need a little bit more details:
What have you already done? Have you ever had a running bluetooth port?
Normal procedure should look like:
Is your bluetooth device set to receive signal?
On mobile go to settings - connections - bluetooth. Folder devices: Is the device already visible? Otherwise type in Add new device. Now you should see the new device. Do your headset require a password? Type in the same as given in the manual. Connection is established.

probably you have to put headset in pairing mode, otherwise your phone cannot detect it....

Hi,
Thanks for your responses.
stefan1959: my device is not visible by my phone, even I add new device.
my bluetooth is active and my headset is on. I have another phone (Samsung D500) and my headset is detected by it.
But I have paired it a long time ago, and it is already known by my phone (D500).
I will look at the manual (if I find it !) if there is a special thing to do to put the headset in pairing mode (thanks nushuth).
I'll post here when I did it.
Thanks

mark_spector said:
I will look at the manual (if I find it !) if there is a special thing to do to put the headset in pairing mode (thanks nushuth).
Click to expand...
Click to collapse
There usually is special procedure. Headsets do not operate in discovery/pairing mode all the time, so your problem solution should be there.

Ok thanks everybody. It works with paring mode.
I forgot it because I have another headset and there is no need to do that.
Thanks again.

BT Headset disconnects

Hi all!
Here is my problem (tried with several other headsets as well):
When the headset is connected to the phone and you take it from larger distance than it's disconnects of course. BUT when you take it back it doesn't want to reconnect automatically. It's really annoying thing, because i'm using a stereo headset to listen music, and i can't bring it with me everytime when i have to move from my desk. I've had some other HTC before but never experienced this untill now on Raphael.
Any idea how to force TP to try to reconnect as the other devices do?

eami said:
Hi all!
Here is my problem (tried with several other headsets as well):
When the headset is connected to the phone and you take it from larger distance than it's disconnects of course. BUT when you take it back it doesn't want to reconnect automatically. It's really annoying thing, because i'm using a stereo headset to listen music, and i can't bring it with me everytime when i have to move from my desk. I've had some other HTC before but never experienced this untill now on Raphael.
Any idea how to force TP to try to reconnect as the other devices do?
Click to expand...
Click to collapse
is this a new BT headset you're using now? I believe some bt headsets simply don't (re)establish connection by themselves

There is a new Bluetooth stack in the Raphael compared to older HTC devices, so this could be an issue with it. Have you tried pressing your headset's play/pause button when you come back in range?

Trancecoder said:
There is a new Bluetooth stack in the Raphael compared to older HTC devices, so this could be an issue with it. Have you tried pressing your headset's play/pause button when you come back in range?
Click to expand...
Click to collapse
Motorola H3 headset: if i press the call button that the connection is reestablish
IQUA BHS-701-S: i have to turn it off than on to make the headset recconnect
btw: i've also noticed, if no device connected on BT, than raphael simple turns off the BT after a while

Mine has never turned BT off on its own. There must be an option for it, perhaps in power saving.

Parrot CK3000 evolution car kit

Hello,
In my car I have the Parrot CK3000 evolution car kit installed.
I can pair it with my nexus without problems.
After pairing incoming and outgoing phone calls should be routed through the handset but that doesn't happen.
My wife's htc hero, after pairing with the same handset, easily allows to establish the connection beetwen the hero and the handset long pressing the "parrot 2.51C" item in bluetooth settings and clicking the "Connect" item.
Long pressing the same item on my nexus shows a popup menu where the only option available is unpair.
Did anybody manage to make this handset work with nexus one?
For your information my parrot car kit has software version 2.51C and restarting the phone, resetting parrot memory, unpairing and pairing again didn't make any difference.
Regards,
Francesco

have a look at:
http://www.parrot.com/forums/english/viewtopic.php?pid=25879#p25879
Although this is for a ck3100.

I have this kit too. I'm at work so I can't test the link you put up but I don't think it will work. The nexus actually pairs with the device, it just won't connect. and the 3100 has an lcd screen so it runs completely different software

I used Parrot CK3100 with HD2. Everything was good! The sync was working very good with tons of rom. I tried with Acer Liquid. It was good. But when I tried with Nexus One original rom and Cyanogen rom I had a big problem with number. I always store the mobile phone number the following form: +36XXXXXXXX. All other phone managed it perfectly but N1 not.
I can sync the number with Parrot but the number was the following format: 36X-XXX-XXXX
It is WRONG!! I can't call the number without "+" I tried with the latest Desire (A10) rom and everything is fine!!!! Like with HD2!!! But the pairing is horrible with the A10. So I use Desire rom now.

I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...

I managed to connect my CK3000 with N1 using the procedure that danimar1 describes.
No luck in copying my contacts to the parrot :/
Did anybody have success with this task?
F.

I've experienced this on other carkits too - it'll pair, but audio never transfers. Obviously a bug in the N1. I hope they fix it soon

In my case routing phone calls between parrot Ck3000 evolution and nexus one works.
The thing that I'm not able to do is to transfer my contacts.
Francesco

the ck3000 doesnt support contact syncing i dont think. that is the one bummer about android phones and bluetooth, no voice tag support. with my bb, it could use the phones voice recognition to voice dial from the car kit

danimar1 said:
I'm talking about a CK3100 here, but I had a problem when I first tried to pair it yesterday, it said it paired successfully but it didn't connect at all, no matter how many times I tried. The solution procedure for me was (maybe some step are not necessary at all but that's how I got it to work)
1. Unpair and delete the reference to the Parrot unit from the phone
2. Turn off phone bluetooth
3. Turn off car bluetooth (keys off until the Parrot turns the screen off)
4. Turn on phone bluetooth and enable visibility
5. Turn on car bluetooth
6. Pair from the Nexus One to the Parrot, enter pin
7. A request to access the agenda apeared on the phone, accept and you're ready to go.
I don't think it matters but just in case, I'm on stock rom (update1) and rooted.
PS: It's a total pain in the ass to have to re-record all the Parrot voice tags whenever I change my phone...
Click to expand...
Click to collapse
when you unpaired, did you delet the phone from the parrot memory also?

doalittledanse said:
when you unpaired, did you delet the phone from the parrot memory also?
Click to expand...
Click to collapse
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.

danimar1 said:
No I didn't, everything was done from the Nexus One. But if you have problems connecting maybe it would be a good idea to do so.
Click to expand...
Click to collapse
and what firmware is your ck3000 on? im assuming thats an issue for me because ive never updated mine and its still at 2.10 i think

I'm sorry I have a CK3100, but anyway I never updated it. I got it a little more than 2 years ago, so I don't think it would be a firmware version problem.

[Q] Bluetooth headset paired but can't connect

Hi all!
loving my sensation so far except that there is one problem:
I tried to connect to my blue tooth headset (Jabra and Plantech), encountered 1 issue. they can be successfully paired but can't be connected! no matter what i do to the headsets (pressing buttons), it just wont connect!
anybody has any idea?
thx

Is it possible that the headset might be connecting to another bluetooth device? (Like your old phone?)
Sent from my HTC Sensation 4G using XDA App

no...they are brand new...i had also unpaired, reboot the phone, powered off and on the headset as well to no avail...
any idea?

Have you tried making a phone call? Mine does not actually connect until i make a call.

Unpair the bluetooth on the phone and turn bluetooth off. On the phone turn bluetooth on and search for device, now turn bluetooth on and resync.

silentsnow31802 said:
Have you tried making a phone call? Mine does not actually connect until i make a call.
Click to expand...
Click to collapse
Nice, this worked for me. Thanks.
HTC Sensation XE

[Q] Bluetooth Issues

Does anyone have problems connecting their Desire S to Bluetooth devices?
My phone seems to pair to my Bluetooth hands free kit but no connection actually happens. The same situation for another Bluetooth kit i have and also my laptop!
I just upgraded from a normal Desire and it worked perfectly with all the devices.
I tried changing the radio and also upgraded the Rom from 1.28.401.1_Radio_20.28b.30.080 5U_38.03.02.11
to
1.47.401.4_Radio_20.28I.30.085 AU_3805.06.02.03
I have searched for solutions but have not found any on XDA

Might be that your bluetooth device is in a black list need to check, can yo utell what bluetooth device you have exactly?

superkid said:
Might be that your bluetooth device is in a black list need to check, can yo utell what bluetooth device you have exactly?
Click to expand...
Click to collapse
My main Bluetooth device is a Merlin Car Mirror Kit V2.
When connected and properly paired it should 'beep' twice, but now it just connects and the phone says its paired. When you make a call it shows it is dialling but no sound comes through both ways.