Database Info

help

was rooting my phone with odin and instead of it saying com## in odin it said com8, and i accidentally hit start. now my phone is stuck on the phone ! computer screen. any ideas

<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> NewStock.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> factoryfs.rfs
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

cant even get it to read in odin now. guess its totally bricked???

You are not totally bricked.
Repeat the instruction for GTG Unbrick on a different PC. I had the same issue and simply re-ran GTG on my Laptop. The " Phone/PC " screen showed a progress bar as I did the unbrick.
Hope this helps
Sent from my SAMSUNG-SGH-I997 using XDA App

omnimanx1 said:
You are not totally bricked.
Repeat the instruction for GTG Unbrick on a different PC. I had the same issue and simply re-ran GTG on my Laptop. The " Phone/PC " screen showed a progress bar as I did the unbrick.
Hope this helps
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
well odin wont recognize it. dont i need to use odin

Have you tried on a different computer as suggested?
Sent from my SAMSUNG-SGH-I997 using XDA App

You have made sure kies is installed right? This will make sure you also have the right drivers.

omnimanx1 said:
Have you tried on a different computer as suggested?
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
it worked! thanks again omni

Droid Charge unroot ODIN

I recently rooted the Droid Charge using ODIN, no issues. I have a custom kernel and I decided to try a rom and it was awful. Anyways went back to my Backup through CWM, no issues. My phone is now lagging beyond belief. I can't do anything at all. I really want to unroot. I know how to use ODIN and have experience with it. All i need is the .tar file for the factory restore. If anyone has a download link or a place that has one that would be greatly appreciated.
Thanks in advance

Have you checked the development section? They have every file you could need with instructions.

Yea i have found one for the samsung pst but i need one for odin samsung pst wont work on my crappy computer.
Sent from my SCH-I510 using XDA App

I have complete step-by-step instructions on how to load stock EP4D back onto the phone complete with links to all of the files you need to do it.
http://www.toms-world.org/android/page/flashstockep4d.html

Thanks so far so good thanks again for the help u guys. i wont be messing with rooting again.
Sent from my DROID CHARGE using XDA App

i tried the odin restore and got this error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1
----now my phone is blank except a little cell phone with what looks like a teather to a computer.
what should i do?
thanks.
john

johnott said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1
----now my phone is blank except a little cell phone with what looks like a teather to a computer.
what should i do?
thanks.
john
Click to expand...
Click to collapse
There are other threads on this issue, and it pretty much means that your internal memory is somehow corrupted.

John, not sure of your experience level or what you are trying to accomplish with that particular flash but make sure you have the basics covered. Correct and uncorrupt files. Phone in download and put battery back in and use of PDA in Odin.
Sent from my SCH-I510 using xda premium

@bwheelies
my experience is very little. i attempted to follow the post that gave step by step instructions on how to get a device back to stock. i thought i followed it perfectly. guess not... i purchased this device already rooted, and it wasn't working properly which was my reason for wanting to get it back...

johnott said:
my experience is very little. i attempted to follow the post that gave step by step instructions on how to get a device back to stock. i thought i followed it perfectly. guess not... i purchased this device already rooted, and it wasn't working properly which was my reason for wanting to get it back...
Click to expand...
Click to collapse
I have read a few people were able to fix this by running Odin with pit file over and over till it worked also you could have used the cwm install zips to get back to stock those seem to have less issues
Sent from my XT875 using xda premium

Odin Error

I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH

[email protected] said:
I Failed A Root Attempt (Power Failure Computer switched off during process) And My Phone Is Now Soft-Bricked.....
Im Trying to Flash Stock ROm using Odin, But When i get to The point Where It Reads "Getting PIT Map" or something Similar, My PC Goes into a Blue error Screen and Then Restarts Aborting The Process.....Havent Tried In Other PC Yet....
Please Help Me...!!
_________________________________________________________
No Worry I Got It, 4got to add the PIt file (nobody Mentioned IT Anywhere), now Dload Started (Hail Google)
_________________________________________________________
W8 Now my Cellphone Is Bootlooping Please Help Again......It can enter Download Mode But Cannot Enter Recovery Mode......
Firmware Used: DDKPH
Click to expand...
Click to collapse
Dont flash pit file if u only have 1 package firmware file.
go find atleast 3 files package firmware and reflash. I dun know which is for DD...region, for me is DXKE1.
Pit file will repartition you phone, so you lost your recovery partition.
Sent from my GT-I9003 using Tapatalk

So, i put a ROM in it with 3 files with PIT, And Then i put the 1 file without PIT and re-partition unchecked...?? Correct.??
1 Q have i lost my USB Data by re-partitioning.?

Flash pit>boot to download mode>flash stock rom>done
Cheers
Sent from my GT-i9003 powered by VurrutRom

Getting this and a FAIL with red background and in phone download stuck at almost 100%
Flashing XXKPE.....
RE-trying download.....
Tried Checking Phone Bootloader Update....no progress......
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> APBOOT_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> CODE_I9003XXKPE_CL409735_REV08_user_low_ship.tar.md5 is valid.
<OSM> MODEM_I9003XXKPE_REV_00_CL1041909.tar.md5 is valid.
<OSM> GT-I9003-CSC-MULTI-OXAKPE.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> normalboot.img
<ID:0/009> boot.bin
<ID:0/009> Sbl.bin
<ID:0/009> param.lfs
<ID:0/009> system.rfs
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..

crk1995 said:
u may also try 4 files of XXKPU firmware..
u can get the link in general section of galaxy sl under the general thread..
Click to expand...
Click to collapse
isnt that russian firmware.?

Kpe should be ok. Try flash using diffrent odin version. Try v1.85, it is ok to me or v1.83 from sammobile.
If fail. Try use different usb port.
But first. Uninstall and reinstall the samsung driver.
Sent from my GT-I9003 using Tapatalk 2 Beta-4

Excluding the bootloader file...(XXKPE) dide the trick now my phone works....updating via Kies.....now

Recover from soft brick

Hello everybudy here is a guide to recover from soft brick(I ave only tested it on S7500 not other)
So do it at ur own risk
First download odin3 v1.85
Download stock firmware for ur cont
Extract both in a particular folder
Open odin
Go to Download mode in ur phone and press volume up
Connect ur phone to pc
If odin shows a yellow mark then u are ready to proceed
Mark PDA & and selct file
Click start in odin
Keep patience
After process is over odin will show pass
Now ur phone will reboot
(DO NOT REMOVE USB CABLE TILL ITS REBOOTED PROPELY)
Complete the setup
Now again switch off mobile as as the process has not been completed yet
Go to recovery mode (this time it would be stock recovery not cwm)
In recovery mode select wipe data factory reset and wipe cache partition
Reboot.
Now u are done!!
HIT THANKS IF I HELPED
Odin-http:// www.androidlegend.com/dl/Odin3_v1.85.zip
Stock firmware(pda)- http://www.tsar3000.com/Joomla/inde...ace-plus-firmwares&catid=55:samsung&Itemid=82
Sent from my GT-S7500

whats new in this there is a sticky in which hole process is shown correctly
and 1 thing -
you should edit PDA ...it is different for different countries
you provided the firmware which is not for Indian users
http://www.sammobile.com/firmwares/
this is were you can get firmware for your own country !!

Ok i have edited pda and u can check the link
Also, I am a Indian and have tried this and its almost same
Only we have to change the language
Thanks any way
Sent from my GT-S7500

I had searched but it was not in q n ans. So i put it in this section. I dont know about stickies as i am new to this
Sent from my GT-S7500

There has also a type of soft brick where you will not be able to access download mode. Then odin will not work
then use USB jig. See http://www.xda-developers.com/android/need-a-samsung-usb-jig-build-your-own/

Ya i know
Sent from my GT-S7500

[email protected] said:
Ya i know
Sent from my GT-S7500
Click to expand...
Click to collapse
I know that you know. It was not mentioned so I mentioned it.

Itz showing fail please help asap!!!!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DDMF2_S7500ODDMF1_S7500DDME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried its coming failed,i tried downloading odin and firmware again from sam mobile, evn removed kies still the same please help asap!!

Ashmit Poojari said:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S7500DDMF2_S7500ODDMF1_S7500DDME1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i tried its coming failed,i tried downloading odin and firmware again from sam mobile, evn removed kies still the same please help asap!!
Click to expand...
Click to collapse
Keep Odin open and change USB ports, remount the PDA & flash. Hope this helped, worked for me

Can't restore note 5 to stock

I am trying to restore my phone to stock because only stock modified rom works with VR, but doesn't play nice with android wear.
So back to stock I go, however when I put it in download mode load up AP with the file, and hit start it says "FAIL!" I have team win installed and that is how I get to download mode. I only had Auto Reboot and F. Reset time selected as well.
Can anyone advise me on what I may be doing wrong?
Here is the log:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

Download the stock firmware again the one you're using might be corrupt, also make sure drivers are installed

I have the drivers installed, also tried 2 firmwares, trying one more now.
Was following this guide:
http://www.droidviews.com/restore-t-mobile-galaxy-note-5-sm-n920t-to-stock-5-1-1-lollipop-firmware/

no firmware seems to be working. I also tried a new cable and a few ports. No change.

tried a different odin, got a bit further but ran into the get PIT for mapping...
Seriously, whoever can get me back to stock, i'll send a paypal donation to say thanks.

Are you using 3.10.7?

I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.

Drachnem said:
tried a different odin, got a bit further but ran into the get PIT for mapping...
Seriously, whoever can get me back to stock, i'll send a paypal donation to say thanks.
Click to expand...
Click to collapse
How are you entering download mode?
Sent from my SM-N920T using Tapatalk

I've done it by using teamwin, also by holding pwr + home + volume down

guaneet said:
Are you using 3.10.7?
Click to expand...
Click to collapse
tried two...3.10.6, and 3.10.7

audscott said:
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Click to expand...
Click to collapse
You have to pay 10.00 to download the files

Drachnem said:
You have to pay 10.00 to download the files
Click to expand...
Click to collapse
Last time I checked you donated if you wanted, not forced to

Drachnem said:
Last time I checked you donated if you wanted, not forced to
Click to expand...
Click to collapse
Donated to try this fix, hope it works...

Drachnem said:
You have to pay 10.00 to download the files
Click to expand...
Click to collapse
As I recollect the fee is for the latest PAC, the others are free.

So it got further with the files and the pit file, but it didn't seem to fully work and I want to understand what may be wrong. It said failed in the first box but continued then the next box said pass.
The phone is now booted in setup mode but I wanted to understand what i may run into with this error or if I am fine...
Here is the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_TMB_N920TUVS2COKC_N920TTMB2COKC_CL5966591_QB7480468_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:1/004> Added!!
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:1/004> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:1/004> File analysis..
<ID:1/004> SetupConnection..
<ID:0/005> SetupConnection..
<ID:1/004> Initialzation..
<ID:1/004> Set PIT file..
<ID:1/004> DO NOT TURN OFF TARGET!!
<ID:1/004> Get PIT for mapping..
<ID:1/004> Firmware update start..
<ID:1/004> SingleDownload.
<ID:1/004> sboot.bin
<ID:1/004> NAND Write Start!!
<ID:1/004> param.bin
<ID:1/004> cm.bin
<ID:1/004> boot.img
<ID:1/004> recovery.img
<ID:1/004> system.img
<ID:0/005> Can't open the serial(COM) port.
<ID:1/004> modem.bin
<ID:1/004> cache.img
<ID:1/004> RQT_CLOSE !!
<ID:1/004> RES OK !!
<ID:1/004> Removed!!
<ID:1/004> Remain Port .... 1
<OSM> All threads completed. (succeed 1 / failed 1)

audscott said:
I experienced the same problem. I was rooted, running whatever custom ROM my heart desired, but unable to flash to stock....until I tried one too many times and had a soft brick. After some research I found I needed a PAC file. You can get it here: http://dl.samfirm.net/page/2. There's not too much to say. Each segment is loaded seperately and take your time. If this works for you I'm happy for you and want nothing more than to help a fellow traveler.
Click to expand...
Click to collapse
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.

Drachnem said:
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Click to expand...
Click to collapse
I don't often have an answer, but after being the benefactor of the knowledge and kindness of others through the years, I'm glad to help when I can.

Drachnem said:
I've done it by using teamwin, also by holding pwr + home + volume down
Click to expand...
Click to collapse
That's the problem you are using twrp enter download mode by volume up+pwr+home
Sent from my SM-N920T using Tapatalk

Drachnem said:
These files did end up working out, ran pit first then the other file. Gave me an error but seems to be working fine for now.
Thanks again.
Click to expand...
Click to collapse
Are you able to post the files here (if that doesn't violate an XDA rule)? Trying to get the old ones and they seems to be gone and really don't want to have to pay, but I guess I will if I have to.

Hey Guys,
Having an issue getting one of my Galaxy Note 5 (SM-N920T) back to stock. I am able to flash stock firmware in Odin 3.10.7 but the phone is bricked. When I flash any stock firmware the phone reboots and is stuck at the Note 5 Splash Screen. If i reboot into recovery and try to do the factory wipe it tells me it can't find "E:" and fails. Only way I can get the phone to boot is if I flash a rooted kernel. Then I noticed it says the Baseband is unknown in settings. I was going to try flashing through ADB but it tells me ADB is disabled, same with flashing from external storage. I cant even get it to reboot into bootloader. I am starting to think the phone needs IMEI repair..