Droid Charge unroot ODIN - Verizon Droid Charge

I recently rooted the Droid Charge using ODIN, no issues. I have a custom kernel and I decided to try a rom and it was awful. Anyways went back to my Backup through CWM, no issues. My phone is now lagging beyond belief. I can't do anything at all. I really want to unroot. I know how to use ODIN and have experience with it. All i need is the .tar file for the factory restore. If anyone has a download link or a place that has one that would be greatly appreciated.
Thanks in advance

Have you checked the development section? They have every file you could need with instructions.

Yea i have found one for the samsung pst but i need one for odin samsung pst wont work on my crappy computer.
Sent from my SCH-I510 using XDA App

I have complete step-by-step instructions on how to load stock EP4D back onto the phone complete with links to all of the files you need to do it.
http://www.toms-world.org/android/page/flashstockep4d.html

Thanks so far so good thanks again for the help u guys. i wont be messing with rooting again.
Sent from my DROID CHARGE using XDA App

i tried the odin restore and got this error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1
----now my phone is blank except a little cell phone with what looks like a teather to a computer.
what should i do?
thanks.
john

johnott said:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CI510_VZW_EP4_ALL_ONE-LTE-CP_REV03_user_CL706183_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Removed!!
<OSM> All threads completed. (succeed 0 / failed 1
----now my phone is blank except a little cell phone with what looks like a teather to a computer.
what should i do?
thanks.
john
Click to expand...
Click to collapse
There are other threads on this issue, and it pretty much means that your internal memory is somehow corrupted.

John, not sure of your experience level or what you are trying to accomplish with that particular flash but make sure you have the basics covered. Correct and uncorrupt files. Phone in download and put battery back in and use of PDA in Odin.
Sent from my SCH-I510 using xda premium

@bwheelies
my experience is very little. i attempted to follow the post that gave step by step instructions on how to get a device back to stock. i thought i followed it perfectly. guess not... i purchased this device already rooted, and it wasn't working properly which was my reason for wanting to get it back...

johnott said:
my experience is very little. i attempted to follow the post that gave step by step instructions on how to get a device back to stock. i thought i followed it perfectly. guess not... i purchased this device already rooted, and it wasn't working properly which was my reason for wanting to get it back...
Click to expand...
Click to collapse
I have read a few people were able to fix this by running Odin with pit file over and over till it worked also you could have used the cwm install zips to get back to stock those seem to have less issues
Sent from my XT875 using xda premium

Related

[Q] Odin and phone semi-bricked?

<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959VUVKH1-REV00-home-low-CL455466.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> Sbl.bin
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> modem.bin
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I tried so many times to complete this tutorial:
http://forum.xda-developers.com/showthread.php?t=1215748
At Step 8 that happens... Complete (Write) operation failed.
Now my phone don't get on. When it turn on just say Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Im very scared because this is not my phone. Im just doing a favor to a friend.
Pleas guys help me to get this phone back. I was just trying to get GB to it.
Thanks for reading!
Omarpr said:
I tried so many times to complete this tutorial:
http://forum.xda-developers.com/showthread.php?t=1215748
At Step 8 that happens... Complete (Write) operation failed.
Now my phone don't get on. When it turn on just say Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Im very scared because this is not my phone. Im just doing a favor to a friend.
Pleas guys help me to get this phone back. I was just trying to get GB to it.
Thanks for reading!
Click to expand...
Click to collapse
what are you trying to flash? (GB or a Froyo Rom?)
ps dont worry you can save the phone ive gone through that firmware issue a million times
he is trying to flash kh1.
odin to the kg4 leak by whitehawk first. then cwm flash the kh1 leak.
Hey Bud I had this very same problem and if you use odin again and flash to the kc1 or kd1 while on that screen that says use kies recovery mode it will flash in that mode as well. I'm guessing that is also a dl screen

[Q] How to know if hard bricked...

I think I may have hard bricked my Infuse... It's giving me zero response. Not sure what happened. I had flashed CM9 to move up to CM10, but I kept getting rainbow distortion, so I went to flash GB bootloader. I used the file given in the guide, double checked I didn't swap them on Odin by accident, and it flashed perfectly in 20 secs. Green Pass and everything. Unless there were supposed to be more than one green passes? My phone just shut off and stayed off, so I just unplugged it. Now it won't respond what-so-ever. How do I know it's hard bricked? What could be the problem? Please give me some advice!
I followed this guide to a T:
http://forum.xda-developers.com/showthread.php?t=1705260
I don't understand what happened. Everything seemed perfect.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-GB-bootloaders-only.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> Sbl.bin
<ID:0/006> modem.bin
<ID:0/006> Removed!!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
bump?
Svorax said:
I think I may have hard bricked my Infuse... It's giving me zero response. Not sure what happened. I had flashed CM9 to move up to CM10, but I kept getting rainbow distortion, so I went to flash GB bootloader. I used the file given in the guide, double checked I didn't swap them on Odin by accident, and it flashed perfectly in 20 secs. Green Pass and everything. Unless there were supposed to be more than one green passes? My phone just shut off and stayed off, so I just unplugged it. Now it won't respond what-so-ever. How do I know it's hard bricked? What could be the problem? Please give me some advice!
I followed this guide to a T:
http://forum.xda-developers.com/showthread.php?t=1705260
I don't understand what happened. Everything seemed perfect.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-GB-bootloaders-only.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.bin
<ID:0/006> Sbl.bin
<ID:0/006> modem.bin
<ID:0/006> Removed!!
<ID:0/006> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
Follow this steps:
1 Use Odin3 v3.04 instead of Odin v1.7
2 try this http://forum.xda-developers.com/showthread.php?t=1116251
3 Enter recovery wipe factory and cache
4. Upgrade with this: http://forum.xda-developers.com/showthread.php?t=1613523 (options C is the best)
5. Now u can upgrade to ICS.
6 In ICS u can upgrade to JB.
Give it some time that happened to me one time and yeah it freaked me out I would keep trying. Take out the battery plug your USB hold down both volume up and down then pop the battery in! Try several methods don't lose it and good luck! Also try Odin 1.85 one or the other.
Sent from my SGH-I997 using xda premium
daemonlmrj said:
Follow this steps:
1 Use Odin3 v3.04 instead of Odin v1.7
2 try this http://forum.xda-developers.com/showthread.php?t=1116251
3 Enter recovery wipe factory and cache
4. Upgrade with this: http://forum.xda-developers.com/showthread.php?t=1613523 (options C is the best)
5. Now u can upgrade to ICS.
6 In ICS u can upgrade to JB.
Click to expand...
Click to collapse
While I think you misunderstood the point of my post, I was able to jig my phone back to life and am now following these steps! One other question: I'm not 100% sure which bootloader I have. Is the GB loader the one that always asks me if I want to install a custom rom? It has been doing that as of recently, but I'm not sure that download mode is part of the bootloader. Thanks again!

need some help. Soft bricked i925 verizon note 10.1

So i recently rooted my i925 with this universal method...
http://forum.xda-developers.com/showthread.php?t=2403230
https://www.youtube.com/watch?v=QCBLOhWavT0
Then I decided to try and run the casuall "Jailbreak" software to get a custom recovery and unlocked bootloader and i just checked "I did it" during the root portion since I already was... and now I'm soft bricked. I can only get into the download mode and tried flashing with odin but no luck might be doing something wrong... Also tried following the cyanogen instructions which involve flashing a cwm recovery in download mode but still no luck. Any help would be greatly appreciated!!! If I hold power the screen will just flash the download mode screen on and off. I pulled the back off and pulled power. No difference.
Any ideas guys? This is the first time I've bricked anything since I've been here and it's got me pretty worried...
Still stuck is anyone has any ideas.
2rz_taco_sr5 said:
Still stuck is anyone has any ideas.
Click to expand...
Click to collapse
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
tselling said:
I would retry ODIN with the original VRAMK1 firmware available from sammobile.com. If that doesn't work tell us what error you are getting.
Click to expand...
Click to collapse
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
2rz_taco_sr5 said:
this is what i get in the message box.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I925VRAMK1_I925VZWAMK1_1481643_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
if it helps im using odin3 v1.85 and then Kies v2.6.3.14074_11 to install the driver. also im running windows 8.1 if that matters.
Click to expand...
Click to collapse
Maybe try Heimdall commandline. You can flash individual pieces.
tselling said:
Maybe try Heimdall commandline. You can flash individual pieces.
Click to expand...
Click to collapse
I'm just going to warranty it out with verizon. Ive warrantied phones before with no issue. usually for amoled screens that get shadows before the year warranty is up. Hoping all goes well.
im having this same issue, device keeps starting and then fails out, is there a solution to this?

[Q&A] [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included

Q&A for [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ODIN][UCLB3] UCLB3 Unbrick - Return to stock - Working PIT included. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Attempted to follow the guide here on my old Infuse to breathe some life back into it, but I can't get it to work. Installed the drivers through Kies, Odin detects my phone in yellow. I follow the guide to the letter, but after flashing 'reset' in blue and getting the green 'pass' my phone simply doesn't reboot, nor can I boot it manually. I've removed the battery a few times and it doesn't change the situation. I can still boot into download mode with no issue and have tried flashing a few times, but I'm having no success booting the phone after Odin is done, nor can I get into recovery mode.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any ideas?
SG2Tiger said:
Attempted to follow the guide here on my old Infuse to breathe some life back into it, but I can't get it to work. Installed the drivers through Kies, Odin detects my phone in yellow. I follow the guide to the letter, but after flashing 'reset' in blue and getting the green 'pass' my phone simply doesn't reboot, nor can I boot it manually. I've removed the battery a few times and it doesn't change the situation. I can still boot into download mode with no issue and have tried flashing a few times, but I'm having no success booting the phone after Odin is done, nor can I get into recovery mode.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> PHONE_UCLB3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> modem.bin
<ID:0/003> modem.bin
<ID:0/003> Removed!!
<ID:0/003> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
Any ideas?
Click to expand...
Click to collapse
I never tried this flash before, but I do have a couple questions before proceeding...
Is your phone AT&T or Rogers?
Are you able to get back into download mode (that is, by method of device fully turned off, holding down both Volume Buttons and inserting the USB cable)?
joel.maxuel said:
I never tried this flash before, but I do have a couple questions before proceeding...
Is your phone AT&T or Rogers?
Are you able to get back into download mode (that is, by method of device fully turned off, holding down both Volume Buttons and inserting the USB cable)?
Click to expand...
Click to collapse
AT&T, the model is I997. I can still get into download mode, but I can't boot normally, nor into recovery mode (by holding volume up + volume down + power button; Samsung logo never appears). I used the included version of Odin with both the UCLB3_Unbrick_1.1.zip and UCLB3_Unbrick_root_1.1.zip files on the linked thread (I tried both).
SG2Tiger said:
AT&T, the model is I997. I can still get into download mode, but I can't boot normally, nor into recovery mode (by holding volume up + volume down + power button; Samsung logo never appears). I used the included version of Odin with both the UCLB3_Unbrick_1.1.zip and UCLB3_Unbrick_root_1.1.zip files on the linked thread (I tried both).
Click to expand...
Click to collapse
I always recommend this one for AT&T (could never try it myself, as I was a Rogers user), but you may have more luck with this (option A or D).
http://forum.xda-developers.com/showthread.php?t=1613523
joel.maxuel said:
I always recommend this one for AT&T (could never try it myself, as I was a Rogers user), but you may have more luck with this (option A or D).
http://forum.xda-developers.com/showthread.php?t=1613523
Click to expand...
Click to collapse
Tried this a few times and it keeps failing. It'll get about 1/3 of the way there and then my computer will make the 'device disconnected' noise and Odin will fail. I left it in download mode, plugged in, without attempting the download to see if it was an issue with my cable or port, and it didn't disconnect...it seems to only be happening when I attempt to flash the md5.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
SG2Tiger said:
Tried this a few times and it keeps failing. It'll get about 1/3 of the way there and then my computer will make the 'device disconnected' noise and Odin will fail. I left it in download mode, plugged in, without attempting the download to see if it was an issue with my cable or port, and it didn't disconnect...it seems to only be happening when I attempt to flash the md5.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex-extras.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Even with option D? I see C was used, based on the log...
Sent from my Asus MeMO Pad 8"
joel.maxuel said:
Even with option D? I see C was used, based on the log...
Sent from my Asus MeMO Pad 8"
Click to expand...
Click to collapse
For some reason option D is taking an unreasonable amount of time to download (it's been over an hour now), so I had initially skipped it and tried options A and C, with the same results. I'll report back once I am actually able to get option D downloaded.
Same problem with every option. Progress reaches about halfway, then fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
SG2Tiger said:
Same problem with every option. Progress reaches about halfway, then fails.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I997UCLB3-CWM-root-deodex.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Click to expand...
Click to collapse
Last thing I can think of, you are using the Odin that comes with the package right?
joel.maxuel said:
Last thing I can think of, you are using the Odin that comes with the package right?
Click to expand...
Click to collapse
Yes, it should be Odin3 v1.7.
The dev-host file mirrors are down? Does anybody have copies of them to upload?
I need the one with root.
Umaroth said:
The dev-host file mirrors are down? Does anybody have copies of them to upload?
I need the one with root.
Click to expand...
Click to collapse
Sorry, no option A here, but I do have option C (with CWM, deodex, etc) on mirror. See the following link:
http://forum.xda-developers.com/showpost.php?p=58392432
Hope this helps.
Link Are Broken
Umm the link cant be downloaded.. i m trying to restore my infuse but most of the downloadable file is broken or file not found
ZExNos said:
Umm the link cant be downloaded.. i m trying to restore my infuse but most of the downloadable file is broken or file not found
Click to expand...
Click to collapse
Good evening,
Try my mirror:
http://forum.xda-developers.com/showpost.php?p=58392432
Options are limited, only "Option C" but it should be enough to get the job done.
Cheers.

Odin Failing to flash stock firmware

Hey all,
Tried flashing back to stock firmware using my Galaxy S4 GT-I9505 using Odin but im getting this error relating to a pit file. I have googled it and downloaded a few pit files for the specific phone but its still not working.
I have flashed previous devices with this flash tool before with no issues usually just have to click AP and browse to the selected firmware click start and shes golden and it works no dramas. However with this device im having soo much bad luck. I have tried to pull my pit file using Miracle box however that doesnt work either, Ive also tried to pull it using ADB but I need ROOT and I dont have it on this device either. I have also tried to root with odin too and I get the same error. is there another program that I can use to pull my own pit file?
I have copied the Odin Log for a reference so hopefully someone can shed some light on this annoying issue cheers.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7105TDVUEMK2_N7105TXSAEMK3_N7105TDVUEMK3_HOME.tar .md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)

Categories

Resources