Sorry for my bad English,
My touch screen will not work or respond to anything. I noticed this on the screen (a rectangle across the screen), and I have done a soft reset, all buttons works, but it is very difficult, or impossible, write a message or go into the any submenus.
attachment image is here
Anyone know what's going on? Is there a pattern,or guide for handling phone without touch screen ?!
Thanks in advance !
Related
I have just done a hard reset on my XDA. However, I am unable to get past the Align Screen mode as I align the screen but it won't go any further.
How can I get past this so that I can get into my XDA and synchronise it?
Thank you
Why isn't it getting past screen alignment? Is it not responding to taps?
V
My XDA responded to virtually nothing - I tapped the screen and it took 5 minutes to respond to every tap instead of instantly. I was advised to do a hard reset, but when I do the screen taps to align the screen, the cursor goes to the middle of the screen and nothing else happens so I am unable to progress.
Any help would be appreciated.
Ive this problem as you do,
Anyone can help?
please
Gill said:
My XDA responded to virtually nothing - I tapped the screen and it took 5 minutes to respond to every tap instead of instantly. I was advised to do a hard reset, but when I do the screen taps to align the screen, the cursor goes to the middle of the screen and nothing else happens so I am unable to progress.
Any help would be appreciated.
Click to expand...
Click to collapse
Weird...
Are you using a screen protector? If so, take it off before alignment; it's possible that there's some crud stuck underneath it that's registering a tap, or something.
I can't think of anything else, besides a faulty touchscreen, or some dirt in one of the edges of the screen. Sorry.
Try reflashing the rom. If that doen't work then looks like you've got hardware failure.
kindly redirect me on how to flash the rom?
im very new
Thank you
Use the search please...
http://forum.xda-developers.com/search.php
and type what you want on the form...
Hi,
I've just received my TyTN today and I'm not very satisfied concerning the touch screen.
I don't know what is happening but the touch screen does NOT respond properly. I've tried to clean it a bit, but the result remains the same.
When I want to use the screen keyboard, it's horrible. I point the letter A and the screen understands that I'm touching the letter under or the letter just near the "A". It's pretty impossible to write a text properly and very hard to open programs or browse with the touch screen.
Of course I've tried to align the screen. It's working without any problem then.
But after some times, opening apps, closing others (using normally the pda inf act), the problem comes back... the TyTN does't really understand where I'm touching the screen.
Then I make a screen alignement, and it's working back... It's just amazing
I don't think it's a hardware problem because the alignement is working after an align screen.
Maybe it's a known error ? Has somebody the same problem ??
Is there a rom update to fix that ? Or is it a problem of my own HTC ?
Thanks !
Can you help me please ?.
Hi,
I don't have this issue with mine...
Check the "TnTN/v1604 problem" topic maybe
I had the same thing, once, with my variO. Probably I pushed too hard onto the screen while cleaning.
Actually, this is a known problem with some of the first shipment devices. Look at the other TyTn topics i this forum.
Hi there....i got an lil problem by my touch pro.....if the keyboard slide out it changed to the landscape mode (there all work fine), but did i switch display off and then on (in landscape mode) i got black parts on the right side of the home screen, if i push any button it got normal, but on start i got the black parts on display.
now i has made a hard reset, but....the same error
did anyone know how to fix that?
sorry for bad english :-(
Workarounds
Das_Michi said:
Hi there....i got an lil problem by my touch pro.....if the keyboard slide out it changed to the landscape mode (there all work fine), but did i switch display off and then on (in landscape mode) i got black parts on the right side of the home screen, if i push any button it got normal, but on start i got the black parts on display.
now i has made a hard reset, but....the same error
did anyone know how to fix that?
sorry for bad english :-(
Click to expand...
Click to collapse
I'm facing the same problem. It seems to be related only to the german ROM, as nobody else here is reporting a similar problem. Here are two work arounds I found so far:
- open a video with windows media player. Somehow this initializes the video driver in a way that the black parts do not occur anymore. However, if you close the app, the black parts occur again. So you have to keep the app in the background
- Set HKLM\System\GWE\PORepaint to 2. If the device is turned on, all windows are redrawn. This removes all black parts. However, this only works if the device has been turned off for a couple of seconds (3 or more)
Hope that helps!
Just recently my Fuze touch screen is not accurate at all. I tried to align the pointer but if I press a certain part of the screen, its selecting the area above or below.
I hate to hard reset my phone- can someone help?
Hard reset it.
Press Start/Settings/System/Screen
Deminjeans said:
Press Start/Settings/System/Screen
Click to expand...
Click to collapse
He tried to align the screen but failed. He said in his original post. The only solution i can see is either hard-resetting or...
tried to align the screen already. Hate to hard reset...any other suggestions?
Did you soft reset it?
hipertec said:
Just recently my Fuze touch screen is not accurate at all. I tried to align the pointer but if I press a certain part of the screen, its selecting the area above or below.
I hate to hard reset my phone- can someone help?
Click to expand...
Click to collapse
You def should have done this properly. Did you align the screen using your stylus only right?
orkitect said:
You def should have done this properly. Did you align the screen using your stylus only right?
Click to expand...
Click to collapse
Yes, aligned with stylus and tried soft reset. Still acting up where if I touch a portion of the screen, it acts as if I pressed a different area.
Has anyone else had this problem?
Might be a long shot, but make sure the screen is clean and free from all debris.
hard reset seems like the only option. unless you want to send it in and get a new one...
Make sure the screen protector you are using is placed right. Are you using a 2 piece plastic body protector? If so, the top half may be putting undue pressure on the screen itself. Remember, with these screens, when touched in two different places will recognize a midpoint...not one or the other of the pressure points.
regestry
There is a regestry key that hold the info of the digitalization process.. I will look for it and post the values. I know that they are not the same for all phones but in his case maybe work... If he wana try.
registry key...
The registry with touch screen values is HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Touch\CalibrationData
and the values on mine are...
493,511 800,186 797,836 192,828 191,176
So just open that registry key and copie those numbers and it shuold work... Maybe not perfect but enough to do a real calibration...
Sorry for my english but its my second lengage...
good luck!
Hello.
The touch fuction of screen of my HTC stopped working from nothing but the display works and seem to be operable by keys, but the keyboard is blocked and I can only set the volume up and down. I tried several times to do hard reset, but it always only do soft reset. What can I do?
Thank you very mouch
Matteo
nobody can help me? I've now re-installed the ROM, but it still doesn't work.
Try to lift up the protective coating of screen.
well polaris touchscreens are kinda delicate and gets damaged easily
good point is that they are cheap and easy to fix, mind only the right model
I've solved the problem by changing the touch screen.
Thank you