Database Info

Screen Burn

Hi all,
I have noticed that my screen seems to get the burn effect at the bottom (where the menu is in TouchFLO) most the time its not really noticeable until you slide the keypad. It dissapears if the phones been off for a while but considering the phone goes into standby and the screen doesnt stay on dont really know why this is happening.
Would you consider RMA'ing? just cant really do without the phone

I think I have noticed the same thing... it's a bug, not a hardware issue... try to softreset the phone and then look closely to that area

Same here
indeed, soft reset works. There is also an uglier version of screen distortion - when I browse to internet page that contains many flash applets (displayed by Adobe Flash Lite plug) Then I have a full screen flooding/chaotic/psychedelic (maybe more adjectives ) effect similar to my pre-previous laptop with broken lcd cables. I can stop it by turning off screen/suspending by the top button and turning it on again. It might appear then again but usually doesn't. Weird, not a problem for me though.

Screen burn in problem

I got my replacement Fuze from AT&T and as soon as I did, I flashed WM6.5 on it. And now I noticed that a few things from landscape view are burned in on my screen, and you can only tell when its closed [portrait view]. The very bottom of the screen, just big enough for the left/right soft touch buttons, flashes constantly. And I can see the X for closing a window and the time burned in from when it was in landscape view.
It did this before and went away and now its back. What do I do to fix it? Get it replaced again?

im not sure what actually causes that but i dont think its real screen burn in. ive had it happen and go away. its something weird with tf3d maybe?

Sometimes I have seen 'Action' and 'Camera' burnt in at the bottom in portrait view, but it's not always visible, and don't see it often

Try turning teh screen brightness way down
fuze2011 said:
I got my replacement Fuze from AT&T and as soon as I did, I flashed WM6.5 on it. And now I noticed that a few things from landscape view are burned in on my screen, and you can only tell when its closed [portrait view]. The very bottom of the screen, just big enough for the left/right soft touch buttons, flashes constantly. And I can see the X for closing a window and the time burned in from when it was in landscape view.
It did this before and went away and now its back. What do I do to fix it? Get it replaced again?
Click to expand...
Click to collapse
I have only had this happen once and it was when I had the screen brightness all the way up. I turned the brightness way down and after about 30 minutes the ghost images went away (gradually).
Hope this helps.

Turn the phone off and take the battery out for a couple minutes. Worked for me.

It seems like a software issue to me, because also when I go to landscape view sometimes, the icons are all distorted. Looks like I'll be going back to WM6.1 for a bit, until I can find a stable 6.5.

KforTouchPro problems.....

Hey guys, i've got a problem. First off, KforTouchPro works fine on my HTC Touch Pro, i can configure buttons fine for Morphgear, PocketGBA, SmartGear etc, it works wonderful. And as everyone that uses this app already knows, you have to switch the setting to MS IME before you launch your game emulator, or else you can't configure the keys. Well, my problem is, after i'm done playing a game, sometimes I forget to switch the setting back to default, and whenever i do a reset or shutoff my phone, it hangs at the screen right before it shows your homescreen and touchflo3d tabs.
Basically, for those that use EnergyROM, it hangs at the screen that shows you the black & blue background with the word EnergyROM 3.0 in the bottom left (or something like that, can't remember). That means you can't do anything at all, since there are no buttons etc for you to press as the home screen is not fully loaded, so basically you got a semi-bricked phone as no matter how many times i try to turn on the phone, it just hangs there, which results in me having to do a hard reset in the end.
To prevent this, you MUST restore the KforTouchPro setting back to the default setting, but sometimes ppl forget and this will cause a semi-bricked phone, which is very risky and quite dangerous.
So, is anyone else having the same problem as me?? Is there a solution to this??
And lastly, what's the difference between KforTouchPro and KforRaphael??

[Q] Screen is rotated when Phone Dialer appears

Hi!
Did anyone here notice that the screen rotates from landscape to portrait mode every time the Phone Dialer appears? Like for instance, when you short press Send (Dial) Key or when you get an incoming call?
I have tried so many differend ROMs I don't even know which one I have installed now. The described behaviour was the same on all of them.
Is there any way to fix this? I have tried 'auto rotate' but it just looks silly: when i get incoming call, the screen first rotates to portrait, then 'auto rotate' rotates it back to landscape and I can't answer the call during all this rotating going on

You probably need to flash back to stock or do a MTTY Task 29 then flash a custom ROM, sounds like you have some residual affects from previous flashes.

Thanks, I guess this is the only thing left to do. I assume you didn't notice this behaviour with your Topaz? The phone app also has other bugs, like the button "Save to contacts" does nothing...

Does it stay in landscape mode? or does it only do if for a second or less and then switch back to portrait? I recall having a similar problem on one of mine... I just did a hard reset tho and that fixed it for me.

If auto rotate is turned on it rotates back to landscape (but ti takes more than a second), else it stays in portrait mode. It's good to know hard reset (better with format) really is the solution. I will try it when I find some time.

[Q] Fuze Slider stuck :'(

Hi everybody,
I have a HTC Fuze and been using it for a long time now.
Yesterday I reckoned that the spring which holds the ribbon slider is dislodged so it wouldn't close the black ribbon Cover.
So I happily found a service manual for the Fuze and gathered my tools to solve the problem.
I have to hand it to myself that I read the manual and was able to disassemble my beauty safely, put back the little spring to hold the black cover for the ribbon slider again.
After that I carefully assembled my Fuze again!
The mechanism was as smooth as silk and I was proud of myself
But then I switched it on and now I find that the Screen is somehow stuck at the LAndscape position.
To explaing it better, let's say if I reset my device and boot it up again (while the keypad is closed), my Fuze still thinks that the slider or keypad is OPEN so it boots up the TAEL ROM in landscape mode only! The only way to go to Portrait is to use the Rotate Screen option.
I thought this would get fixed by a had-Reset and Flashing it again but it still does not work
So now I am stuck on my fuze with the screen always in LANDSCAPE mode.
Note: All the keys are working fine on the Keyboard, including the back-lit!!!
Somehow I think that I missed something while putting it back that lets my Fuze to detect that the Keypad(Slider) is OPEN or CLOSED...
I'm not much of a Geek but I tried opening it again and checked all the ribbons and connectors... No luck.
All features of my Fuze are OK but for the fact that it is stuck always in LANDSCAPE mode whether I close the keypad or OPEN it!!!
Please help, I have an iPhone too but I love my Fuze!!! I don't want it to be sitting inside my desk for the rest of its life :'(
Is there a button or lock that detect the slider opening/closing?
Thanks,