Sometimes, about an 80/20 split, the s2u2 program doesnt correctly lock the phone.
The red discon/power key allows the unlocking of the phone.
When it is working, if I press the red button, it turns the backlight off like normal and s2u2 locks the phone and can only be unlocked by it.
Anyone know of a fix or a setting I have wrong? Reseting doesnt help, and I cant figure out why it works sometimes.
The developer is aware that this problem exists for some devices and stated that there is no fix for this problem. I liked the program but removed it after I found out there would not be a fix for this.
doesn't bother me so much
I too use the s2u2, and i noticed that i get the same thing. However, since all other buttons lock, and use the end key to unlock, I thought it was a normal function. As of v1.01, i still use it, enjoys it, and will continue to use it. When the my 750 goes to sleep, I hit the end key twice, and it comes back to life. Didn't expect any real problems withthe phone dialing itself when it's in my pocket, so for me at least, it works the way it supposed to.
Just my two cents.
Hi all,
I've got a strange problem with my wizard:
When I'm pressing s or h on my hardware keyboard, pocket outlook crashes and the phone becomes extremly slow - in fact, it's unusable. Amazignly this only happens, when s or h are at the beginning of the sentence (as the first letter). All other letters are fine.
The problem came up a few days ago - but I don't know what I have changed in the meantime...
Im using TNT 11.0.2.0 ROM (WM 6.1).
Any idea?
Regards,
Rudi
Is it definitely at the start of the sentence only... or could it be when you haven't pressed another key for a while, wherever you are in the sentence?
There is the feature which runs send & receive when you press and hold S. I think H is help. There are other press and hold combinations too.
It is a long shot, but maybe it is related to that feature somehow? Maybe if that feature isn't working correctly it could cause the crashing whilst it tries to load that feature. In fact the first time it runs, it asks you to confirm a message telling you how it works. If that screen got to the back somehow, maybe outlook is left waiting for your input, but you can't input OK as it is behind the current visible screen.
Of course it might be something completely different....
I tought something similar but could not find out, which function will be startet pressing s or h.
So I did a hard reset and installed everything new, and after the hard reset, s and h work as they are supposed to do. This indicates, that some software I installed (and couldn't remember what software it was) installed a function which did not work properly.
Regards,
Rudi
Hello all... got kind of a big problem that i at the moment don't have an answer to,..
inastalled advanced configuration tool 3.2 on HTC Polaris, the first crash i had was when I enabled animation for menus... (the start menu turned black and the polaris froze), but when i managed to start the advanced configuration tool i unchecked it and it was ok,...
the MAJOR PROBLEM accured when I set the touch screen sensitivity, because the touch part of the screen is inresponsive,.. meaning it does not work at all,.. tryed very hart pressing but it doesn't do it.. the problem is because i can't reach eg start menu or the lower 2 shortcuts with hard button cursor (the wheel)... gestures work however, so i can call the touch flo cube but am not able to select anything, and sam thing goes for enetering pin,.. so i'm not able to make phone calls at the moment.. did few hard resets, and uninstalled the adv. conf. tool but nothing helped... can anyone tel me where (and how to get there) can i adjust this back to normal, i wanted to do this in the advanced configuration tool 3.2 but the problem is you cant make any changes since the screen doesn't work,.. same with reinstalling the program, i can select to install it on a card but canot "click" on next since the screen doesn't do it and the hard keys "can't go there"
so really really someone help me please...
thnx
Are you sure you hard reset and this problem went away or did you mean soft reset?
Maybe aligning the screen will help reset the pressure? Click the button in the middle of the wheel and the GPS button at the same time, the Windows align screen pops up. See if that helps.
I find it very hard to believe that you hard reset and the touch screen sensitivity is still not there. That can't be right.
Hi,
thanx for the reply,... another problem that accoured afterwards was that my friend held the end button (wich locks the keys, screen) and the phone was additionally locked... and literally nothing (again NOTHING ) helped, spent 5 hours trying to save the situation,.. i did soft reset (so your assumption was right) but when later tryed hard reset it probably wasn't done since the instructions say you do it with holding gps and iExplorer buttons while soft reseting it... this resulted in getting the "hard reset screen" wich says to confirm hard reset with hitting the send button, wich unfortunatelly i wasnt able to find in hard keys, and nothing else but this warning text was on the screen as well.. so in the end it probably ended upo wit soft resetting it, anyways it didn't help,... i decided to reinstall the rom i downloaded on htc official site,... it went thru ok and the phone is , though out of the box at least functional,... but in the end, i must admit that am a little surprised this happened with this tool pack (i actually avoided altering the registers just in order to avoid this kid of situations since i don't really know much about these things)... was expecting it to work (in my case) a bit better, more stable. All i wanted really was to get a bit louder speaker volume when ringing and ability to alter the HTC home toolbar, since i find the weather screen totaly irreliable and never really use it, so i thought I would have sth there that i might really have some use of..
well nevertheless.. the phone is working, that's all that matters at the mom so i can again start finishing my phd wich i am defending in a week
PS. the fact that you can not do practically anything without the touch screen just sucks big time, if i compare it to the mouse on pc,... i saved the situation many times with the keybord .. in 1 word strange
take care
My Mobile
Perhaps you should have tryied out the "My Mobile" aplication that allows you to use your mobile from a PC.
It shows a windows with the mobile screen and you can touch it and use the mobile like if you was touching the REAL mobile...
Late for that solucion, perhaps another with that problem can solve it this way...
Chears
@gastonfama: am not sure this would help, since a friend that has htc diamond has this tool pack on and it work k ok on his phone,.. that's why i predicted that it is going to be stable enough on mnie as well,.. so in my thinking, if the 2 htc that are rather alike had such different "reaction", than an emulation would be even less comparable to mine, thanks though
Had the same problem with Schaps_AdvancedConfig and wrong HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold setting.
XML I used had "200" as advised value (system default is 2908!),
after changing you could hit it with a hammer and nothing.
Managed to set is back to recommended value 9000 using MyMobiler app and all problems gone.
See also HKEY_LOCAL_MACHINE\Drivers\TouchPanel\PressureThreshold
sys default is 18866, I use now 19866 and I'm happy
Check tips&tricks thread
I got the same problem, I wanna to install "My Mobiler" but due to the screen is locked, I can't continue the installation, any help ?
well as far as I see here (forgot how i installed it after previous post) you have an exe here :
http://www.mymobiler.com/downsafe.aspx
so you will install it from the pc anyways, but how will you make the confirm on where to install it (mybe if you put storage card out and there will be only 1 memory option, but you will still have to confirm installation i guess).. i wasnt able to confirm without the screen on polaris,.. maybo on some other phone
double post...mistake
I had that same screen not working problem after tweaking the phone with advanced config 3.3, 3.2, 3.1, only hardware buttons work.
Problem can only be solved by Hard Reset. Version 2.2 I think is the only one that works (not thoroughly tested though)
I have had this issue forever. I have done a couple of hard resets for other reasons over the months and it stays.
I occasionally get a lockup. When I do, the phone acts alive, but the touch screen is dead. I am using the Today screen, not Sensui. The two soft keys at the bottom of the page are "Delete" and "Menu" instead of the normal "Calendar" and "Contacts". And they pull up the menus for the inbox.
So it acts as if I am in the inbox, instead of on the today screen. But I see a locked up oday screen.
And I believe it only happens if I use a photo as my today screen background. I don't think it happens with a plain background.
Has anyone else seen this?
This is a VZW device, with stock 6.5 rom. Using the today screen with Phonealarm and Pocketbreeze.
Have you installed Dynamic Resource Proxy and NoPushInternet? Those might help.
When you are "locked up", is there any way to get the touch to start working again? If your touch screen stops working completely and only a soft reset brings it back, it sounds more like a hardware issue.
So I have GingerDX installed with no issues except this one. I tried wiping and fresh install but it is still an issue for me.
It mostly happens with the keyboard, everytime I bring it up, I get the background and empty screen. When I press back, keyboard goes away and everything goes back to normal. It happens with default keyboard and swype which is the keyboard I want to use.
I have seen it occur at other times occasionally though. Anybody got any ideas? This basically makes the phone unusable if I can't type.
Oh and if I rotate the screen, sometimes, it causes the keyboard to appear with squeezed input box and I can use the phone but other times, this does not work.
--
Found problem, theme doesn't work properly on X8. going back to A-Lite resolved isuse.