I have just done a hard reset on my XDA. However, I am unable to get past the Align Screen mode as I align the screen but it won't go any further.
How can I get past this so that I can get into my XDA and synchronise it?
Thank you
Why isn't it getting past screen alignment? Is it not responding to taps?
V
My XDA responded to virtually nothing - I tapped the screen and it took 5 minutes to respond to every tap instead of instantly. I was advised to do a hard reset, but when I do the screen taps to align the screen, the cursor goes to the middle of the screen and nothing else happens so I am unable to progress.
Any help would be appreciated.
Ive this problem as you do,
Anyone can help?
please
Gill said:
My XDA responded to virtually nothing - I tapped the screen and it took 5 minutes to respond to every tap instead of instantly. I was advised to do a hard reset, but when I do the screen taps to align the screen, the cursor goes to the middle of the screen and nothing else happens so I am unable to progress.
Any help would be appreciated.
Click to expand...
Click to collapse
Weird...
Are you using a screen protector? If so, take it off before alignment; it's possible that there's some crud stuck underneath it that's registering a tap, or something.
I can't think of anything else, besides a faulty touchscreen, or some dirt in one of the edges of the screen. Sorry.
Try reflashing the rom. If that doen't work then looks like you've got hardware failure.
kindly redirect me on how to flash the rom?
im very new
Thank you
Use the search please...
http://forum.xda-developers.com/search.php
and type what you want on the form...
Related
My XDA ran out of battery and so I lost everything on it so I have to re-synchronise with my PC.
However, I cannot get past the "Align Screen". I an constantly tapping the four corners but once this is done and the cursor goes back to the centre of the screen, the screen doesn't change and I am unable to get to my XDA.
Urgent help please!
make sure you tap the cross in the middle of the crosshares
Yes, so I have found out after a lot of hard work!
Thanks!
Just recently my Fuze touch screen is not accurate at all. I tried to align the pointer but if I press a certain part of the screen, its selecting the area above or below.
I hate to hard reset my phone- can someone help?
Hard reset it.
Press Start/Settings/System/Screen
Deminjeans said:
Press Start/Settings/System/Screen
Click to expand...
Click to collapse
He tried to align the screen but failed. He said in his original post. The only solution i can see is either hard-resetting or...
tried to align the screen already. Hate to hard reset...any other suggestions?
Did you soft reset it?
hipertec said:
Just recently my Fuze touch screen is not accurate at all. I tried to align the pointer but if I press a certain part of the screen, its selecting the area above or below.
I hate to hard reset my phone- can someone help?
Click to expand...
Click to collapse
You def should have done this properly. Did you align the screen using your stylus only right?
orkitect said:
You def should have done this properly. Did you align the screen using your stylus only right?
Click to expand...
Click to collapse
Yes, aligned with stylus and tried soft reset. Still acting up where if I touch a portion of the screen, it acts as if I pressed a different area.
Has anyone else had this problem?
Might be a long shot, but make sure the screen is clean and free from all debris.
hard reset seems like the only option. unless you want to send it in and get a new one...
Make sure the screen protector you are using is placed right. Are you using a 2 piece plastic body protector? If so, the top half may be putting undue pressure on the screen itself. Remember, with these screens, when touched in two different places will recognize a midpoint...not one or the other of the pressure points.
regestry
There is a regestry key that hold the info of the digitalization process.. I will look for it and post the values. I know that they are not the same for all phones but in his case maybe work... If he wana try.
registry key...
The registry with touch screen values is HKEY_LOCAL_MACHINE\Hardware\DeviceMap\Touch\CalibrationData
and the values on mine are...
493,511 800,186 797,836 192,828 191,176
So just open that registry key and copie those numbers and it shuold work... Maybe not perfect but enough to do a real calibration...
Sorry for my english but its my second lengage...
good luck!
Hi everyone,
I read about screen issues and unlock problems. The one I have is slightly different. During regular work, no matter what I do, the screen shuts off every few seconds (or a little bit longer, not regulary). Buttons on the bottom works and it seems that the touch screen is still active but i can't turn the screen on. Then I have to push the upper button to lock the screen and press it again to unlock it.
I was searching the forums to solve it but I haven't found anything similar to my problem.
Soft is updated to 2.3.4 and it didn't help
thx
Tom
You haven't set the screen timeout to be kite like 15 second have you?
Setting...display
Swyped from HTC Desire S using XDA Premium
of course it's not the screen timout. It's set on 45 seconds. The "blackouts" are not regular, sometimes it's after 5 sec, somtimes after 30
any ideas?
I still have the same problem, so bump...
Could be an app you installed causing the problem. Hard to say.
I would probably factory reset it, and see if it fixes the problem first.
Welcome. Well, my problem is this, my touch screen not functioning periodically. This means that every once in a short time starts to go crazy, so I tapne something and here start something else. It was as if someone touched me in different places display and use that make my job has become impossible. I downloaded some miracle Touch Visualiser, which showed me that they are in different times, two or even three fingers placed on the screen, although it was not touched ... still turns me something inadvertently, or something not quite touching and I see to highlight that if someone had touched, and turns on .. Does anyone know what fault is it? Why is this happening? What can I do about this? Waiting for quick response and thank you in advance
Remove your screen guard and check if your problem persists.
But i haven't screen guard..... its impossible, because sometimes when it has locked the phone up and for a moment it was good
marcind70 said:
But i haven't screen guard.....
Click to expand...
Click to collapse
I am not sure if you understood me previously but I meant scratch guard.
If you don't have one then there could be many reasons for the same, try these steps and see if it helps:
* Check your touchscreen, put this code (*#0*#) => Touch => Run your fingers over the grid of boxes.
* Make a backup of all your data & factory reset your handset.
Do update on the progress.
There is no scratch guard. And what about? Sometimes I can perform this test, but sometimes it is not because the line that I draw, she turns and appears in different places, and sometimes the phone just does not respond to touch, does a black screen and locks up. Already restored to factory settings, did not help...
marcind70 said:
There is no scratch guard. And what about? Sometimes I can perform this test, but sometimes it is not because the line that I draw, she turns and appears in different places, and sometimes the phone just does not respond to touch, does a black screen and locks up. Already restored to factory settings, did not help...
Click to expand...
Click to collapse
Which country are you from buddy ?
Try flashing your stock ROM back using to your device, if still doesn't help take your device to the service center as it could be a hardware problem.
I'm Polish, I apologize for my English ok, I'll take it to the site, I have a warranty card. Thank you
marcind70 said:
I'm Polish, I apologize for my English ok, I'll take it to the site, I have a warranty card. Thank you
Click to expand...
Click to collapse
Do keep us updated on what the service center tells you.
I have been running ICS 4.0.4 v28b on my P925g for a couple months now. A couple days ago my touchscreen started being extremely picky.
When I factory reset the phone, touchscreen works perfectly until the screen turns off. the only inputs it will register are sometimes an unlock swipe and always the power down menu.
I have successfully tried a few resurrection guides but to no avail. I have done a few complete wipes with TWRP as well,
I have no idea what's going on. a little help or advice would be greatly appreciated
Check your power button. Could give permanent inputs. Try to click from time to time only the home button and see uf it mskes screenshots.
Sent from my LG-P920 using xda app-developers app
I apologize P-vlad, I'm a bit of a noob. How do you mean check the power button?
The screen takes input very sporadically. For example, when i have an incoming call, i can use the screen to accept or decline. After that I then have the use of my screen but no front keys. This goes on again until I hit the power button to lock it, then I have no use again.
It may be a hardware issue, i was looking through old help threads in this section where a user was talking about short circuiting the battery for the clock, i have no idea how, but that may be it?