Saw this article on pocketnow.com about the Captivate getting a leaked gingerbread rom whose baseband was UCKF1. If you recall, the infuse' current baseband is UCKE3 and that was updated from UCKD5.
So with the release of the Rogers version of the Infuse, we can look forward to UCKF1 as being the baseband code for gingerbread?
Makes sense:
UCKD5
UCKE3
UCKF1, whats next?
UCKG9?
m.pocketnow.com/android/samsung-captivate-gets-leaked-att-gingerbread-rom
kcab87 said:
Saw this article on pocketnow.com about the Captivate getting a leaked gingerbread rom whose baseband was UCKF1. If you recall, the infuse' current baseband is UCKE3 and that was updated from UCKD5.
So with the release of the Rogers version of the Infuse, we can look forward to UCKF1 as being the baseband code for gingerbread?
Makes sense:
UCKD5
UCKE3
UCKF1, whats next?
UCKG9?
m.pocketnow.com/android/samsung-captivate-gets-leaked-att-gingerbread-rom
Click to expand...
Click to collapse
my phone wont update from the UCKD5 it says wont connect to servers. Is this because my phone is rooted?
Camaro1LE said:
my phone wont update from the UCKD5 it says wont connect to servers. Is this because my phone is rooted?
Click to expand...
Click to collapse
bump for the day
Related
First I wanna say thank you everyone for their hard work and develop just an awesome Cognition version.
I just successfully install the Cognition (Stock Rom) for my Captivate and love it but I am wondering if it is worth it to upgrade to Froyo 2.2?
p/s: I found out I have an issue. Every time I put in SIM card, I have an error (process com.android.phone has stop unexpectedly. Please try again) and it will keep repeating til I take out the sim card Anyone knows what happen? Also what is the latest Cognition version right now?
thank you
hale88 said:
First I wanna say thank you everyone for their hard work and develop just an awesome Cognition version.
I just successfully install the Cognition for my Captivate and love it but I am wondering if it is worth it to upgrade to Froyo 2.2?
thank you
Click to expand...
Click to collapse
cognition IS Froyo 2.2
Pirateghost said:
cognition IS Froyo 2.2
Click to expand...
Click to collapse
i could be mistaken but i think what the posters intents were to get a comparison between the barebones official Froyo leak JI6 and the stated cognition rom.
hale88 said:
I just successfully install the Cognition (Stock Rom) for my Captivate and love it but I am wondering if it is worth it to upgrade to Froyo 2.2?
Click to expand...
Click to collapse
So which is it, Cog or Stock? They are two separate ROMs.
Cog 2.1 or 2.2 or Stock JF6?
Sqdnguns said:
So which is it, Cog or Stock? They are two separate ROMs.
Cog 2.1 or 2.2 or Stock JF6?
Click to expand...
Click to collapse
Sorry I am noobie here and this forum is so mess up that I can't find where are all the Cog. files so I don't know which is the latest but I believe it is the v2.3b8?. According to my phone information:
Firmware version: 2.2
Baseband: I897UCJJ4
Build Number: Cognition v2.3b6
maybe he's referring to the "Eclair 2.1" version of Cognition shown on Designgear's website?
Edit: I see Cog 2.1 was already asked about, NM
Anyway I just flashed to Froyo 2.2...Will test it out and let you know
thank you
lol. you were on Froyo 2.2... a newer build actually than JI6
Dude, you're confused beyond any legal limit.
Go to settings>about phone and tell us what it says for firmware version, baseband version and build number.
We suspect you already WERE running froyo (2.2) because the latest cognition (2.3b8) is built on top of a leaked froyo rom. We also suspect you flashed an older (and more bug-filled) version of froyo.
modest_mandroid said:
Dude, you're confused beyond any legal limit.
Go to settings>about phone and tell us what it says for firmware version, baseband version and build number.
We suspect you already WERE running froyo (2.2) because the latest cognition (2.3b8) is built on top of a leaked froyo rom. We also suspect you flashed an older (and more bug-filled) version of froyo.
Click to expand...
Click to collapse
hahahha Sorry I am too confuse but I got everything solved:
Firmware is 2.2
base: UCJI6
Build: FroYo.UCJI6
thanks for all your helps
hale88 said:
hahahha Sorry I am too confuse but I got everything solved:
Firmware is 2.2
base: UCJI6
Build: FroYo.UCJI6
thanks for all your helps
Click to expand...
Click to collapse
that didnt really solve anything...thats an older version of 2.2 FroYo than what you had before
ok...So what need to upgrade or what need to be fixed?
hale88 said:
ok...So what need to upgrade or what need to be fixed?
Click to expand...
Click to collapse
Before going any further, I highly recommend that you spend a few days reading through the Captivate forum to get a better understanding of how things work and are done. It may save you some unnecessary headaches, actually, it will save you some major headaches.
hale88 said:
hahahha Sorry I am too confuse but I got everything solved:
Firmware is 2.2
base: UCJI6
Build: FroYo.UCJI6
thanks for all your helps
Click to expand...
Click to collapse
Yeah dude, as we suspected you are running the OLD leaked froyo rom. All of the newer custom roms (like DG's perception and cognition) are based off of much newer froyo leaks and generally work much better.
+1 in spending a few days reading before you do anything else. We don't want to see you on here complaining that you bricked your phone because you didn't understand what you were doing.
I know what I will do know. Can I delete this thread myself or MOD. only ?
Pirateghost said:
cognition IS Froyo 2.2
Click to expand...
Click to collapse
The stable cognition build is based on eclair. The beta build is based on froyo.
z28james said:
The stable cognition build is based on eclair. The beta build is based on froyo.
Click to expand...
Click to collapse
perhaps you didnt see what version they posted they were on....they were on 2.2 ...
Pirateghost said:
perhaps you didnt see what version they posted they were on....they were on 2.2 ...
Click to expand...
Click to collapse
The initial post said they were considering moving to 2.2 but were on cognition. They did not know or mention they were on froyo till much later. The second post by you said that cognition = 2.2. You were incorrect. The cognition releases marked "stable" are eclair based.
GETRil shows v20c v21e v10f and LG-95G-v10c_final for my g2x from wind. prior to this was only v21e. is there any documentation on these? also whats the difference between the RIL and the baseband? i made the assumption they were the same thing.
Solace50 said:
GETRil shows v20c v21e v10f and LG-95G-v10c_final for my g2x from wind. prior to this was only v21e. is there any documentation on these? also whats the difference between the RIL and the baseband? i made the assumption they were the same thing.
Click to expand...
Click to collapse
According to how it was explained to me:
The baseband is the firmware on the chip.
The RIL is the bridge between the chip with said firmware and the OS.
jamadio said:
According to how it was explained to me:
The baseband is the firmware on the chip.
The RIL is the bridge between the chip with said firmware and the OS.
Click to expand...
Click to collapse
In that case the RIL is the driver for the baseband?
Sent from my LG-P999 using xda premium
been told cm7 uses its "own" RIL along with other custom roms? true? or can people usually update with no effect/possible benefits. ive read some basebands require certain RILs
Solace50 said:
been told cm7 uses its "own" RIL along with other custom roms? true? or can people usually update with no effect/possible benefits. ive read some basebands require certain RILs
Click to expand...
Click to collapse
Not to sure about that, I used GetRIL and it showed that the CM7 RIL was from the baseband back in March. Whether it was somehow modified or not I don't know, I want to say I doubt it.
I updated my RIL to the v21f to correspond with my updated July baseband. No issues. To be honest though, can't say I've noticed an improvement in anything, but nice to know it shouldn't be a cause of any errors I experience.
jamadio said:
According to how it was explained to me:
The baseband is the firmware on the chip.
The RIL is the bridge between the chip with said firmware and the OS.
Click to expand...
Click to collapse
This is not quite correct. The baseband is the firmware in the radio modem. The RIL is how the Android OS communicates with the modem firmware.
Radio Interface Layer
Sent from my LG-P999 using xda premium
does anyone have any insight of where the other 2 RIL's come from the v10c and v10f?
jamadio said:
Not to sure about that, I used GetRIL and it showed that the CM7 RIL was from the baseband back in March. Whether it was somehow modified or not I don't know, I want to say I doubt it.
I updated my RIL to the v21f to correspond with my updated July baseband. No issues. To be honest though, can't say I've noticed an improvement in anything, but nice to know it shouldn't be a cause of any errors I experience.
Click to expand...
Click to collapse
v21f? i see v21e and v10f
last question is does CM use a modifiled RIL of v20c or is it just the same as whats listed here. solves the question of do i need to reflash the phone if running into issues or can RIL just restore the old version.
The v10 is Froyo. The v21-20 is Gingerbread.
Solace50 said:
v21f? i see v21e and v10f
Click to expand...
Click to collapse
My apologies, it was v21e.
If you look at the upcoming CM7 nightly (202), you can see RIL modifications. So I suppose they do.
Hi,
Few month ago I've upgraded my phone to this version: V10k(latest EuroOpen) V10K_00.kdz - and everything is working fine.
Now I see there is a newer version: Official GB V21A V21A_00.kdz. But some people complaining about problems with signal after update:
Originally Posted by adixtra View Post
Try reinstall drivers. In most people GB working fine but same people have problems with signal after upgrade.
Click to expand...
Click to collapse
So my questions are:
1. If V10k is working fine, can I be sure that V21A will also work fine (I live in lithuania)?
2. There were a lot of writings about some basebands for V21A - will I need to install some additional stuff together with V21A?
Do not try the Gemen V21a there has been reported a lot of problem with signalling issues...try the new UK GB V21 ROM..
garykcliu said:
Do not try the Gemen V21a there has been reported a lot of problem with signalling issues...try the new UK GB V21 ROM..
Click to expand...
Click to collapse
I have just installed the British GB baseband and I think it is the same...
Baseband version L6260_MODEM_SIC_01.1042.00
Kernel Version - 2.6.35.7+
Build number GRJ90.
Is this the same as the German version?
badger28 said:
I have just installed the British GB baseband and I think it is the same...
Baseband version L6260_MODEM_SIC_01.1042.00
Kernel Version - 2.6.35.7+
Build number GRJ90.
Is this the same as the German version?
Click to expand...
Click to collapse
Did you ever compare the MD5 between the UK and Germen ROM, if this is the same then this is exactly the same ROM as that of Germen...
garykcliu said:
Did you ever compare the MD5 between the UK and Germen ROM, if this is the same then this is exactly the same ROM as that of Germen...
Click to expand...
Click to collapse
Sadly I didn't. I don't have the MD5 files and don't have the time to go back and sort it at the moment unfortunately.
Hopefully someone else will get the chance!
badger28 said:
Sadly I didn't. I don't have the MD5 files and don't have the time to go back and sort it at the moment unfortunately.
Hopefully someone else will get the chance!
Click to expand...
Click to collapse
****ing LG, this is exactly the same as Germen
LG is completely fooling around us wit this kind of ****...
---------- Post added at 10:47 AM ---------- Previous post was at 10:46 AM ----------
The loss of signals still remain existed...
You look problem another topics. I use also this ROM.
V21A-00
model : LG-P920
Android: 2.3.5
Baseband: L6260_MODEM_SIC_01.1042.00
Kernel: 2.6.35.7+
Build: GRJ90
Program: LGP920-V21a-NOV-15-2011
I test everything, all of them working clearly.
Only i can't share my mobile internet with hotspot/tehtering...
MD5 Check says that both the UK leak and this Official are IDENTICAL!!!!
i.e. Nothing has been done in the last 3 weeks of waiting!
kriptikchicken said:
MD5 Check says that both the UK leak and this Official are IDENTICAL!!!!
i.e. Nothing has been done in the last 3 weeks of waiting!
Click to expand...
Click to collapse
So is the UK gingerbread official out now?
Hm.... Ok, then it is better to wait more
Hi,
Im trying to get back to Stock using Odin, I flash the Original TAR, but now the phone does not recognize any new updates. So Im stuck on
Android Version: 2.3.5
BaseBand:I727UCLA3
Kernel: 2.6.35.11
Build: Gingerbread UCKJ2
What should I do?
jrmendia said:
Hi,
Im trying to get back to Stock using Odin, I flash the Original TAR, but now the phone does not recognize any new updates. So Im stuck on
Android Version: 2.3.5
BaseBand:I727UCLA3
Kernel: 2.6.35.11
Build: Gingerbread UCKJ2
What should I do?
Click to expand...
Click to collapse
There are no updates out, they pulled the 2.3.6 for the second time.
Why not just flash one of the stock 2.3.6 roms?
Ok. I didnt know about that. Thank you for the information.
Any way I know we will get ICS in 2013. So, no rush ;-)
Sent from my SAMSUNG-SGH-I727 using XDA
I'm trying to find out if i can use UCLA3 modem with leak ICS? I have so many problems with ICS modem.
sure can, i am. only hitch is baseband is listed as "unknown" in about phone section. Flash any ics rom and the flash the leeC ics_rogers_base.zip, which is ucla3
icenight89 said:
sure can, i am. only hitch is baseband is listed as "unknown" in about phone section. Flash any ics rom and the flash the leeC ics_rogers_base.zip, which is ucla3
Click to expand...
Click to collapse
And is working on ATT since is rogers base?
ucla3 works great for both rogers and at&t, so no worried there
I can also confirm that the rogers stock radio works with SKY ICS rom. Although I did update to UCLA4 and have experienced no issues.
I try install this baseband UCLA3 in the ICS leak and the SKY ICS and not work, I no have signal, I try to install again UCLA4 baseband and now say baseband unknown for now I have superlite 3.1 works perfect