[Q] ICS Modem? - AT&T Samsung Galaxy S II Skyrocket SGH-I727

I'm trying to find out if i can use UCLA3 modem with leak ICS? I have so many problems with ICS modem.

sure can, i am. only hitch is baseband is listed as "unknown" in about phone section. Flash any ics rom and the flash the leeC ics_rogers_base.zip, which is ucla3

icenight89 said:
sure can, i am. only hitch is baseband is listed as "unknown" in about phone section. Flash any ics rom and the flash the leeC ics_rogers_base.zip, which is ucla3
Click to expand...
Click to collapse
And is working on ATT since is rogers base?

ucla3 works great for both rogers and at&t, so no worried there

I can also confirm that the rogers stock radio works with SKY ICS rom. Although I did update to UCLA4 and have experienced no issues.

I try install this baseband UCLA3 in the ICS leak and the SKY ICS and not work, I no have signal, I try to install again UCLA4 baseband and now say baseband unknown for now I have superlite 3.1 works perfect

Related

[Radio] Stock Bell note radio I717MUGLA2 - can be used on I727 & Rogers

Mainly for Canadians.
If you want to use it on I727R with ICS Rom. please ONLY flash the base file (no RIL).
http://dl.dropbox.com/u/4333782/Bell_Note_Base.zip
If you want to try it on different gingerbread flavors, you can flash the one with RIL. DO NOT flash this one on ICS, otherwise you will not get signal.
http://dl.dropbox.com/u/4333782/Bell_Note_Base_RIL.zip
After you flash the radio file, ICS may not identify the baseband properly(from About Phone). On GB TPC v3 can detect the baseband properly though.
LeeC said:
Mainly for Canadians.
If you want to use it on I727R with ICS Rom. please ONLY flash the base file (no RIL).
http://dl.dropbox.com/u/4333782/Bell_Note_Base.zip
If you want to try it on different gingerbread flavors, you can flash the one with RIL. DO NOT flash this one on ICS, otherwise you will not get signal.
http://dl.dropbox.com/u/4333782/Bell_Note_Base_RIL.zip
After you flash the radio file, ICS may not identify the baseband properly(from About Phone). On GB TPC v3 can detect the baseband properly though.
Click to expand...
Click to collapse
I flashed the Rogers no RIL, works great, better bars, however how damaging it to have unknown baseband?
not damaging at all, the rom will merely identify baseband as "unknown," as u said.
Im curious to know how much better this modem performa compared to the UCALC4. I had problems flashing it before, but once i got it to stick performance has been great, receptions is better and speed on par with UCLA3. Can other rogers users with LTE weigh in on this? Preferably those in the GTA and Vancouver.
does the resolve the unknown caller issue
Hey gey just here to give my feedback about this modem. (I live in GTA)
Personally, I've experienced slower data speeds and bars of reception with this modem as compared to the UCALC4 modem.
On this modem (no ril) I acquired about 20 mbps down and 8 up where as with the UCALC4 modem, I experienced about 26 mbps and 13 up.
Also, with the no ril modem, I was receiving 3 bars while on the UCALC4, I was receiving 4 bars.
maybe because it is a bell modem and rogers will release their own?
I made this for some users can try to use Bell's dual channel HSPA+ as y2whisper advised. For LTE it may not as good as rogers or UCLA4.
LeeC said:
I made this for some users can try to use Bell's dual channel HSPA+ as y2whisper advised. For LTE it may not as good as rogers or UCLA4.
Click to expand...
Click to collapse
but to be honest im running 4g which is another 3g+ and i didn't see any difference but my battery was going upside down lol..as far as ucalc4 once it settles, its wayy better then then RUKJ7 that we have with rogers..
for me its helpful since i am using the device on bell. and well i don't have the same coverage with bell as you do with rogers for LTE. so figured why not get the best hspa+ speeds as i can get.
(never noticed you were from brampton before)
Has anyone tried flashong the UCLA3 modem on ICS ROMs?
Sent from my SGH-I727R using XDA
cue_32 said:
Has anyone tried flashong the UCLA3 modem on ICS ROMs?
Sent from my SGH-I727R using XDA
Click to expand...
Click to collapse
I tried UCLA3 on ICS yesterday because I can't get LTE on UCALC4. Anyway, it doesn't work. It gives no signal and under 'about phone' it says unknown baseband.
did u try the ics specific one leeC posted?
My mistake, I didn't flash the ICS specific UCLA3. Didn't know of it. Flashed the GB one (no signal) -then flashed back to UCALC4 radio. Ill try ICS UCLA3 soon (it would sure help if someone could post the link so I know for sure)
UCALC4 doesn't seem to be working too well for me. I get LTE very rarely for few seconds at a time only, but mostly not. I always had LTE before though.
I see this Bell Radio works on Rogers i727R. I have not tried it yet myself. I am on TCP v3 still, and looking to try a ICS rom with a new radio, but I am trying to find the Rogers radio in case I want to revert to gb ? Any thoughts ? this is the only radio post i see in the thread, thanks
This thread is actually in the wrong section, general or even dev section would have been better, but I digress.
Flash kj7 radio from this thread if u need rogers radio:
http://forum.xda-developers.com/showthread.php?t=1384865
icenight89 said:
This thread is actually in the wrong section, general or even dev section would have been better, but I digress.
Flash kj7 radio from this thread if u need rogers radio:
http://forum.xda-developers.com/showthread.php?t=1384865
Click to expand...
Click to collapse
Much appreciated ! Thank you !

UCLA3 vs. UCLA3 (Gingerbread)

HI,
Edit: Title should be UCLA3 vs. UCLA2 (Gingerbread)...sorry
I am currently running a rooted MHX 3.1 superlite ROM (thanks). It runs well and seems to be very stable. I have ran some of the newer ICS leaks and decided to go back to gingerbread for the stability.
Although I have not had trouble from it, I have read the UCLA3 modem is not that good and the UCLA2 is a much better modem.
Is there a way to run the UCLA2 modem with gingerbread? (link?) Or is just better to leave well enough alone when it comes to the modems?
Thanks!
Nitro
title should be ucla3 (gingerbread) vs ucla2
And basically no, the ucla2 modem was the crappiest of all the ICS modems. UCLA3 modem with gingerbread still gives better reception and speeds than ics (ucle2 comes fairly close), but I recommend u leave well enough alone
thanks ice
icenight89 said:
title should be ucla3 (gingerbread) vs ucla2
Click to expand...
Click to collapse
Well I know what I mean, just don't mean what I say

[Q] Stupid Question Maybe

I have found with the official ICS that for me, the radio sucks. I can flash the radio from UCLA with no problems despite Gingerbread vs ICS, yes?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Yes.
--
SGH-I727 using Tapatalk, running cm9. Trouble searching? http://forum.xda-developers.com/showthread.php?t=1754490
Thank you.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Flashed UCLA3 radio and now no service
I'm gonna flash the radio for ICS but I'm wondering if someone had a link to a proper UCLA3 radio that is confirmed working with the official ICS.
And as a sidenote, that's all I need to flash, right? In other words, by flashing the UCLA3 radio, I don't also need to flash the UCLA3 kernel or do I?
phillybits said:
I'm gonna flash the radio for ICS but I'm wondering if someone had a link to a proper UCLA3 radio that is confirmed working with the official ICS.
And as a sidenote, that's all I need to flash, right? In other words, by flashing the UCLA3 radio, I don't also need to flash the UCLA3 kernel or do I?
Click to expand...
Click to collapse
U don't have to flash the corresponding kernel. I will try to find the link for you
Why do u want the UCLA3 radio. There are multiple radios that will work on ICS
-----------------------------------------------
Sent from my Skyrocket i727 running Sky ICS
PS: If I was able to help you then hit thanks
For a one stop shop here is Vincom's thread http://forum.xda-developers.com/showthread.php?t=1652398
Here you go...try some out
RADIOS
UCALC4
http://d-h.st/5Co
UXCLF3 (*#2263# Rat Unlocked)
http://d-h.st/yf2
UCLF5
http://d-h.st/M0W
UCLE2
http://d-h.st/iwo
UCLD2
http://d-h.st/Cue
UCLF6
http://d-h.st/XYa
These are from SeanZ Sky ICS thread with ATT ICS base. Here is the link to the thread I pulled the radios off of in case you want to check it out. http://forum.xda-developers.com/showthread.php?t=1763195
-----------------------------------------------
Sent from my Skyrocket i727 running Sky ICS
PS: If I was able to help you then hit thanks
For a one stop shop here is Vincom's thread http://forum.xda-developers.com/showthread.php?t=1652398
Mike, I appreciate the help and links
Mike on XDA said:
Here you go...try some out
RADIOS
UCALC4
http://d-h.st/5Co
UXCLF3 (*#2263# Rat Unlocked)
http://d-h.st/yf2
UCLF5
http://d-h.st/M0W
UCLE2
http://d-h.st/iwo
UCLD2
http://d-h.st/Cue
UCLF6
http://d-h.st/XYa
These are from SeanZ Sky ICS thread with ATT ICS base. Here is the link to the thread I pulled the radios off of in case you want to check it out. http://forum.xda-developers.com/showthread.php?t=1763195
-----------------------------------------------
Sent from my Skyrocket i727 running Sky ICS
PS: If I was able to help you then hit thanks
For a one stop shop here is Vincom's thread http://forum.xda-developers.com/showthread.php?t=1652398
Click to expand...
Click to collapse
Of all the GB and ICS leaks/ROMS, I found UCLA3 to give me the best reception in the most. places and the speeds were unbeatable for 4G.
To follow up though, I ended up trying several radios that I know I've run before and each time I flashed one, baseband came up 'Unknown.' I even flashed the official radio that came with ICS and nothing. So being stuck with no radio, I restored a leaked version of ICS with several bugs and so once I got home, I just hooked back up with Kies and loaded the official again.
It's late and I'm just finishing updating and setting up again so I'm not going to bother with root at the moment as i want to look into it. I started having issues with SU just updating via SU so I downloaded the latest and flashed in CWM and still was reading an outdated version. BB was up to date, so far as I could tell. So I'm just going to wait, do a little more reading and see if anyone else ran into this problem. I'm half tempted to drop back down to 2.3.6, given the quirkiness with the official ICS that I and what appears some users have noted.
Again, thanks for the links. This will come in handy after I've rooted and made a full NANDROID just in case it happens again the next time.
phillybits said:
Of all the GB and ICS leaks/ROMS, I found UCLA3 to give me the best reception in the most. places and the speeds were unbeatable for 4G.
To follow up though, I ended up trying several radios that I know I've run before and each time I flashed one, baseband came up 'Unknown.' I even flashed the official radio that came with ICS and nothing. So being stuck with no radio, I restored a leaked version of ICS with several bugs and so once I got home, I just hooked back up with Kies and loaded the official again.
It's late and I'm just finishing updating and setting up again so I'm not going to bother with root at the moment as i want to look into it. I started having issues with SU just updating via SU so I downloaded the latest and flashed in CWM and still was reading an outdated version. BB was up to date, so far as I could tell. So I'm just going to wait, do a little more reading and see if anyone else ran into this problem. I'm half tempted to drop back down to 2.3.6, given the quirkiness with the official ICS that I and what appears some users have noted.
Again, thanks for the links. This will come in handy after I've rooted and made a full NANDROID just in case it happens again the next time.
Click to expand...
Click to collapse
No problem. Hope everything goes well
-----------------------------------------------
Sent from my Skyrocket i727 running Sky ICS
PS: If I was able to help you then hit thanks
For a one stop shop here is Vincom's thread http://forum.xda-developers.com/showthread.php?t=1652398
Its always best to flash the radio THEN the rom. Might help.
As for the unknown radio.. that'll happen on some combos even if its working.
--
SGH-I727 using Tapatalk, running cm9. Trouble searching? http://forum.xda-developers.com/showthread.php?t=1754490
Thanks for the tip.
mindmajick said:
Its always best to flash the radio THEN the rom. Might help.
As for the unknown radio.. that'll happen on some combos even if its working.
--
SGH-I727 using Tapatalk, running cm9. Trouble searching? http://forum.xda-developers.com/showthread.php?t=1754490
Click to expand...
Click to collapse
It's actually been a while since I did any more legitimate flashing aside from just app APKs but I know in the past, when I wanted to add a system file (new radio, kernel, etc) I just flashed it through CWM and was good to go so I don't really know what happened this time.
As for flashing the radio before the ROM, like I said above, it was the official ICS via Kies (not via CWM) and so I already had the ROM and just wanted to switch the radio out.
Either way, I set everything up last night again, official, and it's actually running a lot better so far.

Roger 727 users... kernal / radio question

Been using Sean's [ROM] SKY-ICS 4.2F3-7 (UXCLF3 Base) 7/9/12 OFFICIAL ROGERS ICS AT&T/ROGERS SAFE and loving it! Keep up the great work.
Just curious to what other Roger's or other 727 users are running...
Reason being my Bluetooth seems to connect and reconnect in both of my Hyundai 2011 & 2012 vehicles... and when on a call there is a lot of reverb or echo. I'm using UCLF6 radio and SKY ICS MODDED UCLF6 kernel...
Curious...
B.
Bluetooth stack in touchwiz based roms sucks. Apparently its much better aosp, so give cm9 a go
Running CM9 latest stable release stock Kernel with UXLF3 radio using LTE.
Investigator Kernel is running great as well.
battery ...it is wat it is ...
Only main problem for me is the 160 characters limit.
K9kazoo said:
Been using Sean's [ROM] SKY-ICS 4.2F3-7 (UXCLF3 Base) 7/9/12 OFFICIAL ROGERS ICS AT&T/ROGERS SAFE and loving it! Keep up the great work.
Just curious to what other Roger's or other 727 users are running...
Reason being my Bluetooth seems to connect and reconnect in both of my Hyundai 2011 & 2012 vehicles... and when on a call there is a lot of reverb or echo. I'm using UCLF6 radio and SKY ICS MODDED UCLF6 kernel...
Curious...
B.
Click to expand...
Click to collapse
Mohan is working on the BT issue, I've been running mostly his ROM's. Seans are great, but eventually I go to Embryo (mainly he has same car as me so if it works on his then good)
For BT quick fix for you on any rom would be just to flash Mohan's 1.5 Kernel and problems will be gone. Only thing is he alredy has a new one out, but BT is not fixed on it yet.
You can get 1.5 and follow the BT issue discussion in his thread here: http://forum.xda-developers.com/showthread.php?t=1701189
Don't forget to hit thanks to him, he is very dedicated to find the root and fix the BT problem.
odeccacccp said:
Mohan is working on the BT issue, I've been running mostly his ROM's. Seans are great, but eventually I go to Embryo (mainly he has same car as me so if it works on his then good)
For BT quick fix for you on any rom would be just to flash Mohan's 1.5 Kernel and problems will be gone. Only thing is he alredy has a new one out, but BT is not fixed on it yet.
You can get 1.5 and follow the BT issue discussion in his thread here: http://forum.xda-developers.com/showthread.php?t=1701189
Don't forget to hit thanks to him, he is very dedicated to find the root and fix the BT problem.
Click to expand...
Click to collapse
you cant flash mohans kernel on cm or any aokp builds, just on samsungs modified roms like skyics, EMBRYO
vincom said:
you cant flash mohans kernel on cm or any aokp builds, just on samsungs modified roms like skyics, EMBRYO
Click to expand...
Click to collapse
Thanks, but did I miss something? (never told him to use CM ROM:laugh:
I'm running CM9 Stable release and have not had any issues as of yet.
I connect it to my BlueAnt ST3 and never have issues. I have even connected it to my OBD II Bluetooth module and never have a communication error.
Running stock CM kernel and I727RUXLF3 radio.
Battery gives me 1-1.5 days depending on use.
ceasee said:
I'm running CM9 Stable release and have not had any issues as of yet.
I connect it to my BlueAnt ST3 and never have issues. I have even connected it to my OBD II Bluetooth module and never have a communication error.
Running stock CM kernel and I727RUXLF3 radio.
Battery gives me 1-1.5 days depending on use.
Click to expand...
Click to collapse
Nice.
BT issues are only with Cars and only certain model cars.
I've flashed CM10 last week it was same problem.
I'll give it a try on CM9.
odeccacccp said:
Thanks, but did I miss something? (never told him to use CM ROM:laugh:
Click to expand...
Click to collapse
you said if he was on "any" rom to try the kernel, sorry if stepping on toes just trying to help
vincom said:
you said if he was on "any" rom to try the kernel, sorry if stepping on toes just trying to help
Click to expand...
Click to collapse
sh-t I see!
no,no problem thanks for pointing this out. I meant exectly what u said, I just forget about it as Mohan has it in BIG RED letters in the thread:cyclops:
Thanks for the replies.
A buddy of mine flashed his wife's phone back to GB... issues resolved. So what's stock radio and kernel? Would not replacing those running ICS not resolve the problems?
I'm using my i727r with Mobilicity and happy to report no voice quality issue with bluetooth in vehicle.
Radio trouble
When I flash roms and install a radio, it takes for ever for it to switch to LTE. APN are all set right. I tried all radios from ATT to Rogers.
Only rom that works is ICS ATT stock tar file.

[Q] After flashing latest Synergy, network show up as empty

I still have my IMEI nmber, it is not zeroed out, but network would show up as empty, and there is no mobile network it says disconnected.
Anyone can help ? thanks!
Also sorry, using latest Syngery build and I have no problem with like the Jelly Bean R14 build at all, and old Synergy rom R143 works for me as well..
Is that with wifi on? Mine says disconnected when wifi is on. Turn it off and shows connected
Sent from my SCH-I535 using xda premium
jaseliu said:
Also sorry, using latest Syngery build and I have no problem with like the Jelly Bean R14 build at all, and old Synergy rom R143 works for me as well..
Click to expand...
Click to collapse
Did you flash the VRBMB1 modem?
I had a similar issue when coming from R143 to R420, I flashed the new modem and wala it was fixed.:good:
I'm now running R443 and I have no issues using the VRBMB1 modem.
pepperdax said:
Did you flash the VRBMB1 modem?
I had a similar issue when coming from R143 to R420, I flashed the new modem and wala it was fixed.:good:
I'm now running R443 and I have no issues using the VRBMB1 modem.
Click to expand...
Click to collapse
Oh I was thinking about that. But I thought r433 has the newest modem so that s what I should use..so which one did you download.
It is not a WiFi on issue but I don't see carrier issue.
Modems are never included in roms. Go to settings -> about phone and look up your baseband version.
You can find flashable modems here
http://forum.xda-developers.com/showthread.php?t=1788313

Categories

Resources