My sister just bought a Quantaray 7" Tablet from a co-worker. The biggest problem was that he forgot his pattern lock, so using the tablet was quite difficult. There was also a problem with it not wanting to DL directly from the marketplace. Screen was working perfectly.
In order to correct these problems, I did a factory reset and wiped cache via bootloader mode. That fixed the above problems, but made it so now the screen calibrations are inverted. Meaning that if I want to press the "1" button on the keyboard, I have to touch the "0", or touch "q" to register "p". In other words, (while being held vertically) I need to press the bottom right of the screen to hit a button on bottom left. I've tried completing the screen calibration during initial setup, but it won't allow me because its so far off.
Running; Android 2.1-Update1 and Kernel 2.6.29 root(at)localhost #154
TL;DR - Touch screen inverted after factory reset (touch on left to press button on right). Need solution.
sorry for the bump, but I'm hoping that someone could still help
Related
Hi, as title says, my screen is "broken". It displays the bottom of what should be on that part of the screen (around 1cm of the screen at the bottom). As far as I am aware, that part of the touch screen works.
Screen is white otherwise, with coloured lines going down the screen, and grey lines going across. Anyone seen this before and or how to fix?
Have no idea how it happened.
Also is there anyway to perform a HARD reset without having the screen working?
Thanks in advance for any help.
try hard reset or other rom
hard reset:
while gps button and internet button pressed - press reset button.
flash new rom:
1.if you have hard-spl download any rom, if don't download only official rom.
2.rename .nbh file to POLAIMG.nbh, copy to sd card, while camera button pressed - press reset button.
i'm having trouble retrieving contacts from my SIM card to use when i boot Android on my touch pro (Fuze)
is there any way to fix this?
also, how do i re-calibrate my screen? its oriented off the the right by about a quarter of an inch or so (end up pressing "w" instead of "e" several times)
and is there a proper shut down method or just remove the battery?
First, you'll probably get better responses on your Android question in that thread.
As far as your sceen calibration, go to Settings/System/Screen.
If you need to soft reset, just press the stylus into the reset hole on the bottom of your Fuze.
For hard rese, press the soft reset as above then immediately hold Volume Down and Ok buttons. IF YOU HARD RESET, ALL PERSONAL DATA WILL BE LOST.
I bought acer dx900 2 weeks back. Bcos of weak battery and slow response to touch screen, I changed to cooked rom from Bruno. It made the phone faster, and is working so for last 7-8 days.
2 days back I added pocketshield; it worked well and gave me no problem. (atleast till it stopped waking up - problem mentioned below).
Today the phone was working fine till I found that it was not waking up to power on switch. I tried soft reset and still it doesnot start the phone .... Just blank screen. I have tried everything I could, no luck ... The phone doesn't start .... Charged the phone again, tried hard reset etc etc ...
Please suggest what should I do to get the phone started!
Hard Reset
Method 1: if the touch screen is functional, tap "Start" - "Programs" - "Utilities" - "Default Settings".
Method 2: press and hold "POWER BUTTON" end "RESET" button for a while,
then release them simultaneously. Wait for a few seconds until the screen wakes up displaying
the model name, firmware version and firmware build date of your device, instantly press and
hold the left side button under the volume slide. Continue pressing such button and release it
when you see an inquiry box shown on the screen "Erase all your data and load default?" "Yes
[press camera button]". So, press the camera button for "Hard Reset", "No" for "Soft Reset".
Good look!
I've experienced this problem too. I'd done what is instructed here again and over again but the screen kept going its black status with some time and something bluring, vibrating on it (I could not read through its darkness)... In short, I cannot make it alive again. Hopless and it seems also helpless. Is there anyone help me? (an email of instruction to [email protected] would be greatly appreciated). Thanks.
One of my phones is an HTC Surround that i don't use that often but still want it to work. To the issue though, each time the phone is turned on (not powered on, just woken) the screen refuses to work on the right side. In order to get past the lock screen you have to swipe up on the left side. After that the right screen becomes 'active' only after you swipe the left screen again. The home button and the search button on the phone only work after sliding the left side of the screen down and hitting the back button, once that task is accomplished the entire phone works perfectly and no more issues develop. This has been driving me crazy trying to figure out why its doing this. I reset the phone twice, both through the reset in the settings and doing a hard reset. When neither of those attempts worked i put it in bootloader and flashed this release (http://www.filefactory.com/file/b48...S_1.03.502.07_5.51.09.06_22.30.50_RELEASE.exe) to it and it still continues with this wierd touch screen issue.
I could probably just throw the phone away and not care but i'd prefer to fix it and sell it. Plus its driving me insane trying to figure out the issue.
(apologies for the wall of text http://incredibly.ytmnd.com/)
just flashed the stock RUU back on to the phone... had issues going through the initial setup until i noticed what is going on, when i press on the left side of the screen the icon/app on the opposite responds. so for example in my keyboard, pressing q types p, caps does backspace, same goes for icons on the home screen, when i pull down notification screen and want to open settings i have to press on the clock on the opposite side. the 3 bottom buttons do work as expected.
- i restarted the deivce
- i turned it all the way off and back on
- i disabled Sense keyboard (via apps)
issue persists
anyone any ideas? help a dude out please... thanks in advance!
re-flashed stock ROM... issue persists.
nobody has seen this before?