i'm having trouble retrieving contacts from my SIM card to use when i boot Android on my touch pro (Fuze)
is there any way to fix this?
also, how do i re-calibrate my screen? its oriented off the the right by about a quarter of an inch or so (end up pressing "w" instead of "e" several times)
and is there a proper shut down method or just remove the battery?
First, you'll probably get better responses on your Android question in that thread.
As far as your sceen calibration, go to Settings/System/Screen.
If you need to soft reset, just press the stylus into the reset hole on the bottom of your Fuze.
For hard rese, press the soft reset as above then immediately hold Volume Down and Ok buttons. IF YOU HARD RESET, ALL PERSONAL DATA WILL BE LOST.
Related
Hi, I've received a damaged qtek s200, which has non-working touchscreen. I can only use the buttons on the bottom of the front side, which is not enough to even unlock it. From the facts I've gathered someone tried to change rom in it and damaged it. On boot it says:
IPL:2.09
SPL:2.09.0000
GSM:02.07.20
OS: 2.9.7.24
I have no experience with pdas. Please help.
alex314 said:
Hi, I've received a damaged qtek s200, which has non-working touchscreen. I can only use the buttons on the bottom of the front side, which is not enough to even unlock it. From the facts I've gathered someone tried to change rom in it and damaged it. On boot it says:
IPL:2.09
SPL:2.09.0000
GSM:02.07.20
OS: 2.9.7.24
I have no experience with pdas. Please help.
Click to expand...
Click to collapse
first try hard reset by pressing camera button+comm manager button and reset the device keep holding the buttons down until you get the following message on the screen: "Press Send to restore factory default." At this point press Send (Green Phone). Warning this will erase all information, contacts etc. However data on the SD card will not be erased.
if the touchscreen is still not working, try to stick a softcard (business card) between the screen and the front panel because sometimes somthing like dust or dirt is puting pressure on the screen, or maybe you droped the phone and the front panel been twisted (even a little bit) and now it is pressing the screen.
if the touchscreen is still not working, try to flash a new rom to the phone by downloading it from here: ftp://ftp.xda-developers.com/Prophet/Shipped_Complete_Updates/
if all the above is not making the touchscreen to work, so probably it is a hardware problem, and you need to send it to repair.
@shayd
hi.. i am trying to make a hard reset on my S200 folowing your instructions (pressing camera button+comm manager button and reset), i have wated 2 or 3 minutes but nothing happened.. i think th battery is not well charged.. is it because of that ? or there's another way to do the hard reset ??
Best Regards.
From the Wiki(link at the top of the page):
To Hard Reset device. Warning this will erase all information, contacts etc. However data on the SD card will not be erased. Hold down camera button, comm manager button and reset the device keep holding the buttons down until you get the following message on the screen: "Press Send to restore factory default." At this point press Send (Green Phone)
hard reset on S200
equinoks said:
@shayd
hi.. i am trying to make a hard reset on my S200 folowing your instructions (pressing camera button+comm manager button and reset), i have wated 2 or 3 minutes but nothing happened.. i think th battery is not well charged.. is it because of that ? or there's another way to do the hard reset ??
Best Regards.
Click to expand...
Click to collapse
Hold down camera button, comm manager button and reset the device. release the reset button but keep holding the camera button and comm manager button down until you get the following message on the screen: "Press Send to restore factory default." At this point press Send (Green Phone)
After to have launch the file VZW_TP_SSPL-Manual.exe mine TP more it has not been turn on !
It' dead !!!
how to default reset with buttons ?
HELP me !
Sorry for my english:???:
As written here:
http://wiki.xda-developers.com/index.php?pagename=Raphael_For_Beginners#Hardx20.Reset
Hard Reset the device:
This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset
Pull out the stylus.
With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:
This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
ferus write: ...With the device turned on, press and....
but my device doesn't turn on, like if it were without battery !
bye for now.
Since English is not your primary language, I'm going to assume you do not live in the US. That being said:
You loaded a file designed ONLY for the Verizon Wireless Touch Pro device. The Verizon Wireless Touch Pro is CDMA (no SIM card).
Manino65 said:
My TP is dead ! How to make to alive ?:
Click to expand...
Click to collapse
i am sure Jesus can resurrect it
i beleive you have a brick my friend
CDMA is WAY not GSM
Based on the apparent knowledge (or lack thereof) of the OP...
First, STOP... You don't know what you're doing.
Second, as you've only loaded the Soft SPL have you tried simply removing the battery yet?
If not then do that before you do anything else .
After you have removed the battery count slowly to 15 then replace the battery and see if it come on again.
Return here and report the results.
First, STOP... You don't know what you're doing.thank you
Second, as you've only loaded the Soft SPL have you tried simply removing the battery yet? yes,for 8 hours.
I have made a hard reset, VOLUME DOWN and CENTER buttons, then press the RESET button, without success.
Wow, I'm suprised that SoftSPL would do perm damage to a device as my understanding was that it didn't actually overwrite the SPL but redirected to load from a different memory location (where is was actually written to).
Anyway...
I would say this leaves you with one option, warranty replacement. Call your provider or the reseller where you purchased the device and tell them that you woke up one fine day and it was simply dead.
Hi,
I have changed the registry key to change the default keyboard input.
HKEY_CURRENT_USER\ControlPanel\Sip
After changing the registry key, I have restarted my mobile but it does not get start properly. It just shows the starting screen (only shows "Windows mobile" on screen). Please help me to solve the problem.
Mobile details :- HTC P3450
OS :- Windows moble 6.1
Thanks in advance,
Milind
looks like you need to hard-reset your device.
Please let me know how to hard reset the device.
-Milind
http://wiki.xda-developers.com/index.php?pagename=Elf_Resets
That's guessing you have an Elf HTC P3450 if not the WIKI will hold the info
Not Working.
Even after resetting it just shows the "Windows Mobile" on screen.
Is there any other way to edit the registry entry.
No way to change registry without being in operating system, my next advise is to go to the WIKI i linked and find your stock ROM and flash.
After a hard reset (soft reset won't solve your issue) it will sit at the Windows Mobile screen for a while as it initializes the system for the first time, so wait 15 or so minutes, and it should get around to setting up your stylus and such.
Hi, this happend to me once screwing around with sip, to get block recognizer back in wm6.5, and the all thing freezed just like you. So do operate hard reset and be patient it will end up telling you you really messed up but will start from scratch after a while.
hcall,trowakage
After hard reset I have Kept the device on for whole night but still it shows the "Windows mobile" on screen.
stylez,
It is not possible to connect the phone to PC through active sync, so it is not possible to flush the ROM.
-Milind.
weird, I suppose you tried pulling out the battery and putting it back on? what keys do you press to hard reset? do you get a message saying you will loose all your data press action to continue?
Can you enter hardspl at all? if so you can flash your rom
To perform a hard reset
1.Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.2.Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:This operation will delete all your personal data, and reset all settings to manufacturer default. Press Action to restore manufacturer default, or press other keys to cancel.
3.Release the TALK and END buttons, and then press ENTER on your device.
good luck
hcall,
I have tried it in the same way which you have mentioned.
In the same way shown in video
But unfortunately it doesn't show any message (hard reset might work after booting OS completely & in my case it is not possible, it just shows "Windows Mobile").
can you boot on hard spl at all?
hcall,
no.
power off...
press power button while the volume key is pressed down... that way you'll enter the tri-color boot screen... connect it to your computer and flash a good rom.
TheRem,
Not working.
Is there another way to reinstall OS.
-Milind
It seems there is no solution for this problem.
-Milind
bring it to the nearest HTC service center in your country.
Fiquei com a mesma dúvida.
A minha situação actual tem transcoding
Sent from my GT-I9100G using Tapatalk 2
This is the craziest issue.. My slide to unlock is no longer working so therefore I can hardly use the phone except that I can take inbound calls. I have tried to factory reset using down volume, circle, reset. Please please please any other ideas are greatly appreciated! I am totally stuck with a useless phone and am having to use a BJ II for now! Uggh!
How come the hard reset didn't work? You need to hold down vol down and the dpad button until the tri-color screen appears.
The easiest thing would be to connect to your pc, then access the registry with ceregeditor. Switch HKLM\Software\Microsoft\Shell\Lockscreen\enabled:1 to 0 and soft reset. Then just unlock off the old screen.
Beats the heck out of me.. I hold the volume button down, and hold down the dpad and nothing. I have done it on reboot, I have done it from the lock screen and nothing. As for your registry idea I like it, its just too bad I cannot get the phone to connect to windows. I have tried it on 2 Windows 7computers now. Anymore ideas?
You need to figure out how to hard reset-you're clearly doing it wrong. Hold down vol-down and the d-pad button simultaneously. Keep holding them down. Then just soft reset. Don't hold down the soft reset-just tap it with the stylus. Wait until the hard reset screen appears, then let go of the other two buttons. There is really no way that it won't work, it's a bootloader operation and it doesn't matter what crap you have on your main memory.
I'm having the same issue. Just flashed the Energy Rom and now I can't unlock my phone. I'll try some of the suggested tips and let you know which worked.
Farmer Ted said:
The easiest thing would be to connect to your pc, then access the registry with ceregeditor. Switch HKLM\Software\Microsoft\Shell\Lockscreen\enabled:1 to 0 and soft reset. Then just unlock off the old screen.
Click to expand...
Click to collapse
I edited the registry with the above value and it solved my problem - Phone is no longer locked on bootup. Now my issue is that somehow my touchscreen is unresponsive (probably why I couldn't unlock my phone). I believe it's a hardware issue not a software one because it looks like liquid got under the screen somehow. Lame. Now I need to flash back to stock ROM and lock it so I can send it in under insurance.
I often don't go around asking questions often since I believe others have more important things to do than to answer inane questions. Unfortunately, I do have a tricky one so bear with me.
I have a GSM Raphael where the volume buttons do not work because of a torn ribbon. A dodgy SIP gave my phone the white screen of death upon uninstall. If I wait a while, a screen promising a hard reset if I simply press the Send button does not work. How can I hard reset the phone if I need a volume button for even entering the tricolor bootloader?
Can you still sync even you when the screen is white? You can try plugging in the sync cable while the phone boots... uninstall the SIP via WMDC.
I don't think I can unfortunately. Otherwise I'd just registry edit on my computer to set default sip to the normal keyboard.
same problem
I have the same probleme did you solf it yet??
In the end, I had to buy a replacement cable for it.