Calibrate Touch/Location? - Eee Pad Transformer Q&A, Help & Troubleshooting

Is there a way to calibrate touch on screen (similar to way we did it on Windows Mobile?).
My screen is quite a bit off. Keyboard enters keys below what I click; when I select links on the browser, even if zoom in close and be very sure I click in right area, it will select the link below.
Very frustrating.
I cannot find a way to calibrate it.
This on top of the VERY laggy response(currently trying Thumb Kekyboard) makes the experience pretty bad. I was working to make this something for my wife to use, but she may throw it and me out the door.

the browser is also off for me slightly, it works fine everywhere else though. It seems to be fine in Aurora browser (firefox alpha).
Also if it's laggy get a custom ROM.

Related

Very Strange Fuze Keyboard Troubles

My keyboard has been lagging and doing other strange things that has got me worried. I did a hard reset on it yesterday and before I even installed any software I was forced to use the on-screen board for a spell as the slide out was un-responsive. I chalked it up to some background process being a hog and moved on. Now I'm finding some consitencies.
On a fresh reboot if I open the notes app in landscape mode and start typing I can see the cursor moving but nothing else till I get about 75% across the screen and then there are some black artifacts that now look like a ton of characters all bunched up in the space of about 3 positions wide. If I keep typing till it does a return then the entire line of text shows up and the process repeats itself on the next line.
If I have a full page of text open in say Total commander's text editor in portrait mode and slide the keyboard out, it will make a pattern of those black artifacts diagonally down the screen toward the left side and it will not correct itself. If I go back to portrait mode all is well again. There is seriously something wrong here.
I can't find any information from searching on the problem but hoping one of the experts here could shed some light on it and let me know if it's time to think about a return. Will try to uncover more if I can.
Many Thanks,
Eidolen
I took some screens of the problem. Both pics on the bottom are the same document but left is with TC's editor and the right is Word. Upper right is word as well. Hopefullt the attachment makes it through, if not I can host and link to it.
If you are running a stock ROM without any customizations (you said you hard reset your device), then chances are you have a defective Fuze. You should exchange it through AT&T's 30 day return policy.
If you're not running a stock ROM, then maybe you have an unstable one. Flash Da_G's clean ROM and see if the issue still occurs. Since that ROM has very little installed by default, the chances of a software conflict are slim.
Please post back here with your status.
I was thinking the same thing but the one thing I can't reproduce is when the keyboard doesn't respond at all. Maybe the graphics and the responsiveness are 2 different things?? I'm wondering if clear-type might have something to do with the graphics but that shouldn't lag the keyboard.
Gonna disable Clear-type now and will report back.
Eidolen
Well if I would have done a search with cleartype I would have found my answer, sorry I didn't figure it out sooner. At least pople can see what cleartype looks like on the Fuze in landscape mode if they were wondering. Apparently there is no fix known other than to turn it off. Hopefully the laggy response clears up as well but not getting my hope up. Thanks for your response.
Eidolen
What an odd thing for ClearType to do in landscape mode... as for laggy response, flashing a clean ROM would give you a good gauge as to how preinstalled apps can affect such lag.
Same thing happens to me but in txt'in sometimes my keyboard dont work at all and i have to restart the device, but this has happen to me only 3 times and the keyboard still have life cuz when i hit the fn key or shift the light comes on indicating that i put them on. as for screen lag i bearly get screen lag, because i did some hack i saw in this thread and it seems to of help alittle
by the way am using the ROMeOS2, i was wondering if i was the only person with this problem but apperently not.
Yep I got the same problem. I installed the NullKb cab on my phone to keep the kb from popping up in Opera. It didn't work. I uninstalled NullKb, It still shows up as selectable under other input options. The lag got progressively worse and even resets will not get the keyboard to work.
I've got the same problem. It's really strange.
I used ROMeOS but now am back to Australian Three official rom.
It seems like, when ClearType is active, I can't see what I am writing with the keyboard in LandScape mode. Even stranger is that when you write an SMS, the keyboard writes fine as there is T9 active.
I really need a fix for this as this has started to frustrate me.
I found having "clear type" activated was my problem as well. I turn it off and my kb is back to usual normal. I have a euro stock unit. Very happy with the rest of it's performance. I can live without cleartype.
eidolen said:
My keyboard has been lagging and doing other strange things that has got me worried. I did a hard reset on it yesterday and before I even installed any software I was forced to use the on-screen board for a spell as the slide out was un-responsive. I chalked it up to some background process being a hog and moved on. Now I'm finding some consitencies.
On a fresh reboot if I open the notes app in landscape mode and start typing I can see the cursor moving but nothing else till I get about 75% across the screen and then there are some black artifacts that now look like a ton of characters all bunched up in the space of about 3 positions wide. If I keep typing till it does a return then the entire line of text shows up and the process repeats itself on the next line.
If I have a full page of text open in say Total commander's text editor in portrait mode and slide the keyboard out, it will make a pattern of those black artifacts diagonally down the screen toward the left side and it will not correct itself. If I go back to portrait mode all is well again. There is seriously something wrong here.
I can't find any information from searching on the problem but hoping one of the experts here could shed some light on it and let me know if it's time to think about a return. Will try to uncover more if I can.
Many Thanks,
Eidolen
Click to expand...
Click to collapse
Hi:
I had the same problems. I fixed it by disabling cleartype in landscape (using Diamond Tweaks), and then installing the Fuze Keyboard fix cab, which I am attaching here for you, in case you want to try it. I'm sorry I don't remember the original post I got it from. After doing these 2 things, everything seems to be working great for me.

[GRIPE] Just me, or does 2-finger trackpad scrolling suck in 3.2?

Hey guys -
Posting this because apparently ASUS actually monitors this forum (which, by the way, I'm very pleased to know).
One thing I loved about the dock accessory was how seemless 2-finger scrolling was on the trackpad. It was beautifully implemented. However, since 3.2 (and the new pinch-to-zoom capability given to the trackpad), I find it very cumbersome to use:
For instance, when trying to scroll web pages, I have to keep my 2 fingers GLUED together in order for the trackpad to not mistake the gesture as a pinch-to-zoom. Before, I could keep my fingers at a comfortable position, but now, scrolling is uncomfortable and unreliable due to the touchpad's frequent mistaking my contact as a pinch. Anyone else find this? (By the way, my fingers are not large at all.)
This is driving me a little nuts. If I could somehow disable the pinch-to-zoom functionality on the touchpad just to fix this problem, I would. :s Honestly, I almost never want to zoom in on a web page - but too often, unless I'm making a very concious effort to keep my fingers pressed together in uncomfortable fashion, an unintended zoom gesture is the result.
A good model for how this functionality should work (as much as I hate to draw this comparison) - an Apple trackpad implements both of these gestures perfectly. No uncomfortable Spock-like finger positioning necessary to scroll OR zoom. Hoping this might be fixed / adjusted in the next update.
It sucks
Sent from my Transformer TF101 using Tapatalk
The only thing I like about the new cursor is that it doesn't "click" automatically when scrolling - that was a huge pain and I'm glad it's out of the way.
Sent from my Transformer TF101 using Tapatalk
I was going to bring up this issue as well. It would seem that it is now three finger scrolling.
Yeah i hate it too. It also sort of annoys me how the normal mouse cursor is now that circle thing.
curti.nogg said:
I was going to bring up this issue as well. It would seem that it is now three finger scrolling.
Click to expand...
Click to collapse
Ha - except three finger scrolling doesn't work, of course. Actually, I'd probably find that easier than this current implementation!
pickles319 said:
Yeah i hate it too. It also sort of annoys me how the normal mouse cursor is now that circle thing.
Click to expand...
Click to collapse
Personally, I can live with the circle - I don't find it horrible. What helps is that (as you've probably noticed) the mouse movement is much smoother, with some acceleration added as well. But what drives me bonkers is that in the process of smoothing those issues out, a new one was created with the botched 2-finger scrolling stuff...
Yeah, the scrolling sucks in 3.2
I hate seeing the cursor when I'm scrolling
the cursor also sucks now because it is round, now I can't select text easily
Keep one index finger on the left mouse button, and the other index finger on the pad. Bam! Perfect "two-finger" scrolling every time.
Seriously though, I've always had my fingers "glued" together when scrolling. That's just how I got used to it, and it has always worked great. Holding my fingers in a Spock-like position is perfectly comfortable. If you can't hold your fingers in that type of position for very long, you either need to work on your dexterity or use a USB/Bluetooth mouse. Personally I would very much miss having the pinch to zoom functionality, because without it you can't operate Google Maps/Earth on the trackpad alone.
I'm surprised no one has yet mentioned the fact that the direction of scrolling is now inverted, mimicking the touchscreen rather than every other trackpad on every other laptop/netbook I've ever used. Can I please just have vertical AND horizontal scrolling at the extreme edges of the pad, like I have everywhere else? It really works quite well.
And I agree that I don't need the zoom that often. When I do, it's sufficient to do it on the screen. They can disable that, too.
earlyberd: Though I personally agree with you, some people can't do the Vulcan thing with their fingers at all, much less hold them that way.
Perhaps Asus should just release an app that allows for custom configuration of the trackpad, maybe even give us the ability to change the cursor as well. That's a standard feature on most laptops these days, and I don't see any reason why it wouldn't be possible here.
I find the main problem is when scrolling between screens, eithe homescreens or application screens. The physics seems to make getting to the next page via touchpad very difficult.
I have noticed when scrolling through web pages, the cursor will move back to the starting position when it starts a 2 finger scroll/grab.
I used to love the mouse, now i kind of hate it.
and here i thought the custom rom i was using broke the scrolling all together. maybe im just not doing it right.
hmmm ill have to test this today. seems like as we get closer and closer to laptop functionality, more and more options are needed to keep everyone happy.
as for the scroll direction, apple and MS are implementing this right now too.
Yeah I agree the two fingerr scrolling sucks, but, you can always just click and drag, what 3.2 really did was make the mouse slightly more like using it as a touchscreen. Personally I like it better, they just need to fine tune it so that two finger scrolling and pinch to zoom dont get mistaken as much
bethanensinger said:
Yeah I agree the two fingerr scrolling sucks, but, you can always just click and drag, what 3.2 really did was make the mouse slightly more like using it as a touchscreen. Personally I like it better, they just need to fine tune it so that two finger scrolling and pinch to zoom dont get mistaken as much
Click to expand...
Click to collapse
Agreed!
What I'm doing in the meantime (in an effort to avoid throwing my tablet dock against the wall in frustration!) is 'click & drag' to scroll INSTEAD of 2-finger, as the latter is very difficult now. On the touchpad, 'click & drag' is possible by tapping first and immediately dragging to scroll. This will have to do until ASUS fixes the problem, or bundles in a configuration app (as was suggested above).
I really hate the scrolling in 3.2 as well. I don't mind the mouse pointer or the fact that scrolling direction has been reversed. The zoom vs scoll detection could use some tuning, but that's not even my biggest issue either. The thing I can't stand is how jerky the scrolling is now. If you scroll slowly it doesn't even respond until you're half way down the trackpad, and when it does you get notchy/jerky scrolling. If you swipe quickly you get the equivalent of a quick swipe of the screen and scroll quickly down the page farther than I'd prefer. The scrolling previously was smooth and the amount of scroll was a perfect ratio with the movement of your fingers. It's terrible now. I've just gone back to 3.1 for the time being.
I've gotten semi-use to the scrolling, but I can't get use to the big white circle. I'm double clicking on buttons or missing them all together because it's not precise enough - this is especially true when I have to select text while using an RDP app... pain in the rear!
Sent from my Transformer TF101 using Tapatalk
I find it really weird that one cannot customize the mouse for example speed, zoom direction etc.. This was done so well on my old asus eee netbooks. I also find the circle very confusing as it reminds one of the sign a mouse sometimes does when its loading the page, the old mouse cursor sign wasnt good either as often not visible but why can't they at least put a cross in the middle of the mouse so that one knows where one is clicking? I also dont like the new inverted 2-finger scrolling. I need an app to change this!!

Web browsing lag? Slow loading links...

I'm interested in getting this tab, and I've checked it out at bestbuy. My only concern was the web browsing lag I noticed. I've seen this also in some reviews of the tab. The lag happens when you click on a link at it'll take a good 5 seconds before it starts to even load the link. Viewing the pages is no problem, but going from link to link seems to be sluggish. I noticed this on my original galaxy tab as well.
I also noticed that the web browser for some reason dims the backlight. I know this was an option for the original tab, and I looked for some separate brightness setting but none was found.
Any owners want to chime in?
There are so many good alternative browser in the market that I do not bother to use the stock one any more. I recommend Miren Browser.
P_
i almost never use stock browers. also it depends on the connection speed and what you are trying to view. usually on the demo models at best buy they show all flash video. if you change that setting to on demand so you click the flash it speeds it up greatly
another bug i saw today... let me know if it exists. Go into any web browser and try to scroll at the very right edge of the screen in landscape. I tried this and it did not scroll. I tried this on the left side and it was no problem. I tried this after noticing the backspace on the keyboard doesn't register half the time. It seems like something is wrong with the screen on the right side. I'm wondering if the firmware update fixed this issue too.

Turn off one finger zoom

Just installed Synergy JB and have noticed that there is one finger zoom in here where you basically slide up and down on the edge of the screen and it zooms in and out. I see people with the note II have this also so it seems it may be a Touchwiz JB feature but I haven't seen a way to turn it off. It's nice but would love to find a way to toggle it. I already checked display, accessibility, and motion controls with no luck and it zooms in any app that can zoom.
If I remember correctly E actually put the GNOTE 2 camera in that ROM so what you are seeing is that actually camera... As far as I know the only way to change that would be to flash a different camera.... HOWEVER.. I do have the NOTE 2 camera on mine also and can pinch to zoom or use the volume keys so there may be different versions of that also... But anyways flash a different camera and that should do the trick
dr12volt1338 said:
If I remember correctly E actually put the GNOTE 2 camera in that ROM so what you are seeing is that actually camera... As far as I know the only way to change that would be to flash a different camera.... HOWEVER.. I do have the NOTE 2 camera on mine also and can pinch to zoom or use the volume keys so there may be different versions of that also... But anyways flash a different camera and that should do the trick
Click to expand...
Click to collapse
Well its not just the camera it's in the browser, wikipedia app, and others
I apologize.. I swear the post said in the camera app.... I know he pulled a few .APK's from the Note 2... All I can suggest is check the settings for the individual apps... You could also try and download a different browser and try that... That would help narrow it down if it is something "Overseeing" the ROM or something specific to certain .APK's....
anyone find a fix for this...it's happening in my browser now and it's killing me?
skillzo1 said:
anyone find a fix for this...it's happening in my browser now and it's killing me?
Click to expand...
Click to collapse
Check your other thread.
Sent from my Unleashed GalaxyMODed ...... um ...... phone?
What Scroll Bars?
skillzo1 said:
anyone find a fix for this...it's happening in my browser now and it's killing me?
Click to expand...
Click to collapse
With all due respect, you may want to look at your screen and take note of the fact there are no scroll bars.
I understand that we are creatures of habit, and as I have been using the GUI, with Scroll Bars since the first Mac (1984) I too tend to use the edge of the screen to scroll, but the truth is, it is a Phone, not a Mac, not a PC. It has no scroll bars. Scroll slightly to the left (or to the right-so to not disenfranchise left handed phone users) or 1/4 of the way across, or 1/3rd, or 1/2 or 3/4 quarters, etc. etc. etc.
Anywhere you'd like. It's a Phone, it's a touch screen. No mouse, no ability to tap in the scroll bar and have the screen advance. No way to position your mouse over the up or down arrow, and have the screen scroll smoothly without any other movement than you holding down the mouse button.
It's a Phone. Get it?
Anyway, what is really infuriating is that Samsung put this feature on the phone, didn't tell anyone, until people started complaining about it and reporting it as a bug, and then rather than either tell people about it, or add the ability through a Setting to disable it, in a new release of the software, the morons simply took it away.
So let me ask you, if your phone came configured with the setting disabled by default, but gave you the option to enable it, try it, see if you liked it, then said, nah, and turned it off, would that have been best for you and guys like me who depend on it all day every day to be able to use my Phone with one hand?
I think the answer is obvious.
Samsung, you are laughable, amateur software developers.
Thankfully we have XDA.
Now I just need one of you on here to figure out where in the heck it is hidden so you can make me a build that includes it with whatever else is in the latest releases.
You see, Android is almost entirely "Hard Coded" so it is not something the average user can just go "teeak" , like following the step by step instructions of someone to simply "Hack" the Windows Registry to make it the way we like it.
All the more reason Samsung is so pitiful.

Touch screen sensitivity

Hello. I have an Nvidia Shield tablet k1 on lollipop 5.1.1. Everything is great about this tablet except the touch screen. It is really sensitive. Also, when I am scrolling, it "jumps" and goes faster than I actually scrolled. It scrolls faster than it should. I found this thread on xda. It helped a little with the being too sensitive issue, but scrolling is still really weird. This is my second device since the first one's micro sd card was defective. They both are like this. Is there anything I can do, or do I just have to deal with it?
http://forum.xda-developers.com/shield-tablet/general/adjust-touchscreen-sensitivity-t2963326
I was opening a thread with this exact same issue. I'm not on stock though (using the latest CM12 nightly), so I don't seem to have the 'Sensor Calibration' option.
Also the touchscreen seems to register a touch even when the finger is not touching the screen.
On the other hand, if I scroll a very small distance (like 0.5 centimetres) the list I'm scrolling doesn't move at all. This doesn't happen on other devices such as my Nexus 5 and Nexus 7 and is very annoying in some cases (some games, or moving the cursor for keyboard input).
I'll try to record a video of this behaviour.
What can we do to fix this?
Update: found a video (not mine) showing the issue I'm talking about: https://www.youtube.com/watch?v=08uPtusOJHQ
anyone else with this issue?
I also have this issue on/off sporadically on stock rom.
I'll be scrolling and itll jump back the opposite direction
Its like it looses track of the touch then catches it again.
It's irritating as my S5, Nexus 2012 have no problems scrolling smoothly.
I don't recall the original shield i tested in store to have this issue either.
Currently having amazon ship me a replacement to see if its just limited to the one I received. (QA issues)
Calibrating screen might fix the issues: go to About in settings and tap on model number until the calibration screen comes up. then hit calibrate. don't touch the screen then when it asks to reboot, reboot.
variance said:
Calibrating screen might fix the issues: go to About in settings and tap on model number until the calibration screen comes up. then hit calibrate. don't touch the screen then when it asks to reboot, reboot.
Click to expand...
Click to collapse
Did it fix the issue I posted the video about? I'm on Cyanogenmod now so I don't have the option to calibrate the screen, but I would consider going back to stock if it fixed this issue...
Calibration doesnt help at all , same issue at brand new k1. Nvidia says thats normal functionality lol
Yeah, very normal for a gaming tablet which would require precision...
Not trying to take up for this thing but I haven't had the first touch screen issue with it . so maybe not all is affected?? I've tried to replicate the issue but just can't everywhere I touch and slide is smooth
You mean it doesn't "jump" like the OP said? I don't seem to have that issue either.
I'm more concerned about the touchscreen's precision, as shown in the video.

Categories

Resources