Database Info

Wifi problems? - Try this

MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\Parms\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\Parms\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.

papamopps said:
MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.
Click to expand...
Click to collapse
This did the the trick for me running NottoSmart Vanilla. I had wifiinit.lnk in startup, it was the reg key values that did the trick for me.
I don't have any SPB programs installed, although I did try one out, but then uninstalled it, so maybe that is what "broke" itm since I know wireless was working when I installed the ROM. I currently have the following programs installed if that helps...
Voice Command 1.6
Pocket Mechanic
Sharkey Softkey Changer
JamDat Worms
Registry Wizard
Battery Status 1.3 beta
Live Search
TOtal Commander
CorePlayer
CoolCamera
Treo Picture dialer
SP TimeSync
PQzII Wizard
Phone Alarm with B&W Pure skin
Foxit PDF
Tascal CloseAll
THANKS!!! for figuring this out!

Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?

zoki said:
Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?
Click to expand...
Click to collapse
Sorry, sure it is Parm I edit in first Post.
Thanks
(I answerd this settings so often that I now wrote it wrong)
Sorry to all searching the wrong settings - now it is right in first post.

Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.

HTCPreloadStatus doesn't stick?
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy

ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Here is my experience. I was having intermittent inability to enable WiFi. Sometimes this was rectified with a soft reset, other times not. I checked the two keys and they were both set to zero.
I applied the changes and re-booted after waiting awhile. I noticed that the WiFi came on after reset without having to enable it. I am running mUn with the collected fixes from NotTooSmart.
I have since toggled and re-toggled and re-booted my Wizard and all seems well. However, HTCPreloadStatus is set to zero on mine regardless of whether the WiFi is on or not.
It is all working though.

zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).

ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Have you tried to softreset by switching off with 5sec Powerbutton? And the turn on again?

zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks!!!!!
I allways have problem creating a cab file with WinCECabmanager.
Is there a how to somewhere?

I just cant install the new comm manager.
mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
Hi there m8. I just couldnt install the new comm manager. I just upload it to my device and try it to install in the main memory but i just cant.
This is weird. :s
Any advice ???

Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?

Yes... that did it.
mfrazzz said:
Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?
Click to expand...
Click to collapse
It was very strange. I did copied the cab into the phones main memory, executed and voila.
Thankx m8

mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?

dcdivenut said:
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?
Click to expand...
Click to collapse
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.

papamopps said:
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.
Click to expand...
Click to collapse
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?

dcdivenut said:
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?
Click to expand...
Click to collapse
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.

papamopps said:
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.
Click to expand...
Click to collapse
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?

dcdivenut said:
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?
Click to expand...
Click to collapse
"Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?"
That was mentioned by me.
To your question. My settings stay even after softreset. Do you change it and turn off device by powerbutton for 5seconds? For this ever works regarding to reghacks.
Didn´t wanted to stress you. Discussion is the way this forum lives!

dcdivenut said:
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Click to expand...
Click to collapse
Yes, thats the one. But for the wizard there is a reg key you have to remove or it breaks your Wifi. Please look at the XPlore thread for discussion on this (or as suggested, start a new thread specifically about the 10 button comm manager. It probably needs a seperate thread anyway).

Comm Manager - missing discriptions for icons?

I read somewhere this may be due to a system font being replaced but I have not installed any new software in weeks.
Anybody know how to recover? I can't afford a hard reset.

Descriptions, But no icons or background
Maybe our problems have the same cause. The comm manager wizard worked for me before on my 8525. Then updated to WM6 and now it installs partway and stops. Message is "not enough permissions". I get the text for the buttons, but not the icons or background. Also can't afford a hard reset.
Would rather have your half of the problem. At least you can still see the keys.

Update. I was able to fix the problem.
At: http://blogs.conchango.com/stuartpreston/archive/2005/11/10/2376.aspx
found directions. Have included them below as modified to fix my particular problem.
The following reg editor at the blog site did not do the job on my 8525. RegEditSTG http://blogs.conchango.com/stuartpreston/files/regeditSTG.zip
I used the reg editor at here:http://www.8525software.com/component/option,com_remository/Itemid,27/func,fileinfo/id,86/
Followed the directions for what keys to fix in the link above. Reinstalled the comm manager "CommManager_8button_wizard.cab" and it works well. Looks good, too.
The reg edit I used works on the 8525 remotely from the PC. Just unzip and execute with the 8525 connected. Change the security policies as follows:
Navigate to HKLM\Security\Policies\Policies\
Write down any entries you change, before you change them.
Delete the entry you need to change.
click add DWORD and insert the correct values in the dialog on the PC's screen.
Change "00001001" value to 1 (decimal) (recovery note: default is 2)
Change "00001005" value to 40 (decimal) (recovery note: default is 16)
To fix the security policy, I changed only ...005 to 40.
Reboot device.
I believe WM6 is taking on the same baggage as PC Windows, so that this type of fix will become the norm instead of the exception.

Hide SIM contact

Hi I have problem permanently hide SIM contact.
I used registry editor and made this chage:
HKEY_CURRENT_USER\ControlPanel\Phone
"ShowSim"=dword:0
It works perfectly until I made soft reset. After soft reset went the value ShowSim back on 1 and I see the SIM contact again.
Am I doing something wrong ? I made many others changes in registry which are without change after soft reset.
Please help.
Many thanks
ROM 1.90.401.1 WWE
Radio 1.02.25.19

Change the value to 0,close properly regeditor(menu-exit) and softreset using some software utility or hold power key for power off. Don't use hardware reset button!

Hide SIM contacts with
You can hide contacts with Advanced Config It really works even after soft reset...

This is strange, bud I tested all and it comes allways back on "1" after soft reset.
Do I need to do some unlock to be able make changes in HKEY_CURRENT_USER ? Other modifications in registry was permanent...
Thanks

heba said:
This is strange, bud I tested all and it comes allways back on "1" after soft reset.
Do I need to do some unlock to be able make changes in HKEY_CURRENT_USER ? Other modifications in registry was permanent...
Thanks
Click to expand...
Click to collapse
This also happens on my device, have tried changing this in AC and editing the reg, but with a soft reset it comes back

This program should help (it has been written for diamond).
http://forum.xda-developers.com/showthread.php?p=2413858

ThomasNM's advice worked for me

Great ! NikiSimFix is working perfectly !!!

Problem was already mentioned by me couple of pages below.
Registry settings doesnt help as well as Advanced Config.
NikiSimFix.cab solved this issue.
B.

bzdziagwa said:
Problem was already mentioned by me couple of pages below.
Registry settings doesnt help as well as Advanced Config.
NikiSimFix.cab solved this issue.
B.
Click to expand...
Click to collapse
I'm lost, I've tried this just now and again they keep coming back I really don't know what else to do now

It MUST be performed like this (try to not ommit any step)
1.Change known registry value to 0
2.Install NikiSimFix patch
3.SHUT DOWN TP - don't perform Soft Reset - SHUT DOWN TP.
Now....it works
B.

bzdziagwa said:
It MUST be performed like this (try to not ommit any step)
1.Change known registry value to 0
2.Install NikiSimFix patch
3.SHUT DOWN TP - don't perform Soft Reset - SHUT DOWN TP.
Now....it works
B.
Click to expand...
Click to collapse
I just don't get it anymore....
After doing all these steps it just won't work.
In my contact list I can see still all my contacts twice.
True my mobile shell I can see my contacts twice...
ONLY with my spb diary I see them once....
Really really strange.. who gets this?

@ Pensador:
have you tried this already?
http://forum.xda-developers.com/showpost.php?p=1769534&postcount=2
Offtopic and in Dutch:
hey iemand van de TouchPro Hyve

heey thnx 4 your reply...
No I didn't try that one because I don't want to erase everything on my sim...
Just a precaution....because if someday ( only god knows when ) my device crashes of whatever....I will loose all my contacts....and that's something i do not like...
@ offtopic in dutch:
hehe, jah leuk eh. Maar ik denk dat wel meerdere van hyves hier op t forumpje zitten hoor .

it does not erase your simcard haha! (that would be stupid) it just stops your device from constantly looking @ your simcard and make double contacts in your phonebook
(but it never hurts to make a backup just in case..... Don't you have your contacts sync. in outlook???)

no solution mentioned above working here either. nicksimfix wouldn't do it

For those who can't get this working, which ROM are you using? NikiSimFix worked fine for me on the stock ROM, but I've tried everything on DCS V13 and V14 ROMs and nothing works.
Interestingly if you make the registry change and you don't use TouchFlo 3D then this is fine, but as soon as TouchFlo starts the SIM contacts reappear. What I have found is that if you make the registry change after a soft reset the SIM contacts will remain hidden until the next soft reset (or until you manually restart TouchFlo).
I made a .reg file to do this quickly (below), but I would still rather find a permanent solution.
Rowan

Xtreme XL said:
it does not erase your simcard haha! (that would be stupid) it just stops your device from constantly looking @ your simcard and make double contacts in your phonebook
(but it never hurts to make a backup just in case..... Don't you have your contacts sync. in outlook???)
Click to expand...
Click to collapse
ahh allrighty...I misunderstood it then...
But also this fix didn't work 4 me...
Get a little bit tyred of it now....I just don't understand why I still can see all my contacts twice!
I will explain what I did...
I did the setting in AC, then I checked the setting in DT after that I checked the setting @Regiustry editor... So now knew 4 sure everything was off.
I runned my .cab and after that I turned my tp down.. no reset but just turned it down...
didn't work.. also didn't work witrh a soft reset...

Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0

iRiKi said:
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
Click to expand...
Click to collapse
THNX 4 your reply! but It still doesn't work!
I think I tried about everything right now!
4 the people who maybe have a solution....I use spb mobile shell....

NoDo + Unlocking?

Hi all!
Just wondering before i try and flash my Mozart...
Has anyone on here with the NoDo rom been able to unlock and sideload?? .....
cheers
Keith

as of now that isn't possible .

ahhhhhh, ok
just wanted to make sure before i did it!!
But... nah, i think ill hold off, as i dont see it being cracked any time soon.... lol

Out of curiosity, couldn't some phones like the lg optimus 7 with direct access to the registry through mfg manually change the registry to label the device as a developer model? Because the way I see it, registry access = full system override. And I don't think the software update can/will remove the lg engineer app.
Thoughts on this?

ceesheim said:
as of now that isn't possible .
Click to expand...
Click to collapse
I wouldn't be so sure, giving him credit as a proved by a+b=c we could install for o2 uk the european nodo rom without goldcard, our fellow member petbede is actually working on a way to sideload apps in a way you would make think your phone it's installling it from marketplace. Until now, if I remember correctly, he's able to sideload like 19 apps. You can follow the progress here: http://forum.xda-developers.com/showthread.php?t=988672

jemaho said:
I wouldn't be so sure, giving him credit as a proved by a+b=c we could install for o2 uk the european nodo rom without goldcard, our fellow member petbede is actually working on a way to sideload apps in a way you would make think your phone it's installling it from marketplace. Until now, if I remember correctly, he's able to sideload like 19 apps. You can follow the progress here: http://forum.xda-developers.com/showthread.php?t=988672
Click to expand...
Click to collapse
did you actually see one of his app's or some screen shots from a wifi tether /unlocking app ?
for me that is that you can't unlock it and that there isn't any wifi tethering on wp7 .
ofcourse if we had some prove then that would be real cool .

ceesheim said:
did you actually see one of his app's or some screen shots from a wifi tether /unlocking app ?
for me that is that you can't unlock it and that there isn't any wifi tethering on wp7 .
ofcourse if we had some prove then that would be real cool .
Click to expand...
Click to collapse
The guy who was claiming that he could sideload apps on the nodo rom got a letter just minutes before he was going to release it. LOL
petbede said:
HOWDY ALL!!! I tried everything and it ALL works great. But, I got a bit of sad news for you ALL that must have been waiting. I got a letter into my facebook account and my hotmail/live account, it sure is serious issue cuz in the letter I was told to hold back my discoveries or I will find myself in a mess that I cant get out of. The letter went further saying that I should keep my discoveries to myself, the letter said all kind of stuff. I have inform my solicitors about it and they said I should hold on to whatever I discover that the update just newly came out.
Right now, I am confuse cuz we brought the phone not rented it. Please, I will like to hear from you ALL out there on what I should do. THANKS!!!
This has been one of another SAD day for me.
PEACE!!!
Click to expand...
Click to collapse

I really hoped for some time that he made it, but THAT's just funny
That letter-thing doesn't sound really plausible. Just another guy who wants to get some fame for nothing...

Real people post real letters as proof. Sham.
Sent using XDA Windows Phone 7 App

He had also claimed he was working on android for the hd7 and that his device was halting at the android bootscreen/whatever. Anyways, if you bumped this thread for the nodo unlock, it can be done by using the prevent lock xap and then updating to nodo.. Refer this thread : http://forum.xda-developers.com/showthread.php?t=1009974

-WP7User- said:
I really hoped for some time that he made it, but THAT's just funny
That letter-thing doesn't sound really plausible. Just another guy who wants to get some fame for nothing...
Click to expand...
Click to collapse
Finally someone sees what I and others have pointed out for a long time.
Sent from my HD7 T9292 using XDA Windows Phone 7 App

HyperMatrix said:
Out of curiosity, couldn't some phones like the lg optimus 7 with direct access to the registry through mfg manually change the registry to label the device as a developer model? Because the way I see it, registry access = full system override. And I don't think the software update can/will remove the lg engineer app.
Thoughts on this?
Click to expand...
Click to collapse
Actually YES - I know this from personal experience. I did not change my phone over and unlock it untill AFTER I got NoDo. I use the LG Quantum and it has MFG. Below is what you need to unlock, at least with the quantum.
You can unlock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "0" or a random long number. If it does continue.
Set your input data box to "1" and hit SET. Output result should be 1
How To Keep Your Phone Unlocked
You can keep your phone unlocked and prevent Zune from re-locking it.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlProd" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Keep this screen open and continue to Part 2
Part 2
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlInt" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Backout to the password screen and shutdown the phone via powerbutton.
Reboot and sync. Your phone should stay unlocked.

Also worth noting, on any phone: if you unlock and do the registry hack to prevent relocking before updating to NoDo, the unlocked state will persist across the update as long as you don't hard-reset. It will, however, not be possible to re-unlock if you do hard-reset the phone after updating at this point, unless you have the aforementioned LG. I'm sure someone will come up with another method that works for NoDo eventually, but it hasn't been done yet.

bkaul said:
Also worth noting, on any phone: if you unlock and do the registry hack to prevent relocking before updating to NoDo, the unlocked state will persist across the update as long as you don't hard-reset. It will, however, not be possible to re-unlock if you do hard-reset the phone after updating at this point, unless you have the aforementioned LG. I'm sure someone will come up with another method that works for NoDo eventually, but it hasn't been done yet.
Click to expand...
Click to collapse
Yup. I just updated my phone today. I had registry tweaks done to prevent relocking while it was on 7004. After update, phone is still unlocked

Will the method that jlott069 posted work with my LG optimus 7?
Thanks in advance

I have HTC 7 Trophy with latest update :7.0.7392 (I guess it is NoDo). Can I use the method proposed by jlott069 on it to unlock it or is it for LG? And Can I do it now or do I rollback the update?
Thanks

the method was originally posted by airwa1kin7 here. This works on all LG WP7 phones, no other devices. On LG phones this works even after you updated to NoDo and your phone happens to be locked. Follow the instructions and you will unlock your phone and keep it unlocked before and after NoDo.

jlott069 said:
Actually YES - I know this from personal experience. I did not change my phone over and unlock it untill AFTER I got NoDo. I use the LG Quantum and it has MFG. Below is what you need to unlock, at least with the quantum.
You can unlock the phone by using the MFG registry editor.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Comm\Security\LVMod"
Set your input key to "DeveloperUnlockState" and set to DWORD
Hit Query. Output result should return a "0" or a random long number. If it does continue.
Set your input data box to "1" and hit SET. Output result should be 1
How To Keep Your Phone Unlocked
You can keep your phone unlocked and prevent Zune from re-locking it.
Open the MFG app and use the password to open it. If you don't know it's (appmfg#*#)
Go to Engineer Menu -> Other Settings -> Edit Registry
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlProd" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Keep this screen open and continue to Part 2
Part 2
Set your ROOT PATH to "HKEY_LOCAL_MACHINE"
Set your input path to "\Software\Microsoft\DeviceReg"
Set your input key to "PortalUrlInt" and set to DWORD
Hit Query. Output result should return data. If it does continue.
Keep your input data box empty and hit SET. Output result should be 0
Backout to the password screen and shutdown the phone via powerbutton.
Reboot and sync. Your phone should stay unlocked.
Click to expand...
Click to collapse
Fantastic!! Spent the last two hours trying to unlock my Optimus 7 then stumbled across this post! Will link to it from the Optimus 7 forum, but please post yourself to get the thanks + appreciation!

PaulMdx said:
Fantastic!! Spent the last two hours trying to unlock my Optimus 7 then stumbled across this post! Will link to it from the Optimus 7 forum, but please post yourself to get the thanks + appreciation!
Click to expand...
Click to collapse
will also work with Mango btw. This has been posted in the LG forum already I believe.

derausgewanderte said:
will also work with Mango btw. This has been posted in the LG forum already I believe.
Click to expand...
Click to collapse
Apologies, you're quite right. Not sure how I missed that.

remove 10 apps limit vol 2

I've got unlocked optimus 7 nodo , could anyone send me a path or smth i have to edit in registry (Mfg) that will allow me to install more than 10 apps ?
I know we've got a xap that makes it possible , but it seems not working on optimus 7 ..

HKLM \ Software \ Microsoft \ DeviceReg \ Install \ MaxUnsignedApp

That's correct, but it seems (personnaly) that on Optimus 7, it always return back to the old value, so you can install more than 10, but always go back to registry to modify before another installation.
Can you confirm?

What value did you set it to...The problem is on an Optimus 7, you cannot enter Hex values. You MUST turn them into decimal values before entering them into the phone. So, in the follow key, through the MFG app registry editor on the Optimus 7, enter it as follows:
[HKEY_LOCAL_MACHINE\Software\Microsoft\DeviceReg\ Install]
"MaxUnsignedApp"=dword:2147483647
The number is the decimal value for the actually needed key 7FFFFFFF.
This has solved my problem, and make sure you have set the proper values to prevent relocking when syncing with Zune.

From time to time, the value get back to the original state, like the chevron relock issue.
Just reset the value before installing a new app.
BTW, you don't have to set so high value... 1000 is enough even in decimal

Thanks Nico & Kapanak.
I didn't change any values related to prevent relocking, as I have a dev unlocked phone (can I try this hack? I'm affraid of breaking the "dev status").
Nico, did you try relocking hack?

Custom Theme for Wp7
I have a samsung focus flash, and this app wont stay open long enough to do anything, please help

since your phone is on Nodo upgrade use the windowbreak project and you will be good to go it is all done for you then.

@TheBeO: It's OK to use the "prevent relock" hack even with official dev unlock. I strongly recommend you do so, as otherwise you'll have to manually re-interop-unlock (set the MaxUnsignedApp value) all the time.
It's easy enough to undo the prevent-relock thing, just restore the string values (the original values are on the forum somewhere, though of course you can just write them down before clearing them yourself).