MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\Parms\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\Parms\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.
papamopps said:
MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.
Click to expand...
Click to collapse
This did the the trick for me running NottoSmart Vanilla. I had wifiinit.lnk in startup, it was the reg key values that did the trick for me.
I don't have any SPB programs installed, although I did try one out, but then uninstalled it, so maybe that is what "broke" itm since I know wireless was working when I installed the ROM. I currently have the following programs installed if that helps...
Voice Command 1.6
Pocket Mechanic
Sharkey Softkey Changer
JamDat Worms
Registry Wizard
Battery Status 1.3 beta
Live Search
TOtal Commander
CorePlayer
CoolCamera
Treo Picture dialer
SP TimeSync
PQzII Wizard
Phone Alarm with B&W Pure skin
Foxit PDF
Tascal CloseAll
THANKS!!! for figuring this out!
Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?
zoki said:
Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?
Click to expand...
Click to collapse
Sorry, sure it is Parm I edit in first Post.
Thanks
(I answerd this settings so often that I now wrote it wrong)
Sorry to all searching the wrong settings - now it is right in first post.
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
HTCPreloadStatus doesn't stick?
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Here is my experience. I was having intermittent inability to enable WiFi. Sometimes this was rectified with a soft reset, other times not. I checked the two keys and they were both set to zero.
I applied the changes and re-booted after waiting awhile. I noticed that the WiFi came on after reset without having to enable it. I am running mUn with the collected fixes from NotTooSmart.
I have since toggled and re-toggled and re-booted my Wizard and all seems well. However, HTCPreloadStatus is set to zero on mine regardless of whether the WiFi is on or not.
It is all working though.
zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Have you tried to softreset by switching off with 5sec Powerbutton? And the turn on again?
zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks!!!!!
I allways have problem creating a cab file with WinCECabmanager.
Is there a how to somewhere?
I just cant install the new comm manager.
mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
Hi there m8. I just couldnt install the new comm manager. I just upload it to my device and try it to install in the main memory but i just cant.
This is weird. :s
Any advice ???
Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?
Yes... that did it.
mfrazzz said:
Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?
Click to expand...
Click to collapse
It was very strange. I did copied the cab into the phones main memory, executed and voila.
Thankx m8
mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?
dcdivenut said:
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?
Click to expand...
Click to collapse
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.
papamopps said:
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.
Click to expand...
Click to collapse
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?
dcdivenut said:
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?
Click to expand...
Click to collapse
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.
papamopps said:
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.
Click to expand...
Click to collapse
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?
dcdivenut said:
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?
Click to expand...
Click to collapse
"Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?"
That was mentioned by me.
To your question. My settings stay even after softreset. Do you change it and turn off device by powerbutton for 5seconds? For this ever works regarding to reghacks.
Didn´t wanted to stress you. Discussion is the way this forum lives!
dcdivenut said:
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Click to expand...
Click to collapse
Yes, thats the one. But for the wizard there is a reg key you have to remove or it breaks your Wifi. Please look at the XPlore thread for discussion on this (or as suggested, start a new thread specifically about the 10 button comm manager. It probably needs a seperate thread anyway).
Related
Hello all I really hope someone here can help me. I really like the touch style 10 button comm manager but for whatever reason, my WIFI never worked when I had this installed so I found a download that changed the registry for WLAN under Comm Manager that was supposed to fix the wifi problem but instead, it completely killed my WIFI. I have uninstalled and reinstalled like 3 different Comm Managers and my WIFI will still not turn on.
Here is an attached copy of the WLAN reg that I installed. If someone with working WIFI could please tell me what this registry's string is supposed to be in order to have working WIFI that would be incredible.
Please help, I'm Desperate. I use my WIFI at work.
Thanks in advance, Dan.
Tried flashing new rom?
new rom?
try this rom: ICTDifrentie ROM
Greats Antonius
I'm not interested in trying a new rom. I actually just flashed back to WM5 because I like the performance and the lack of bugs. I am the one that screwed up my WIFI but I want to fix it without hard-resetting since I don't want to have to reinstall all of my 3rd party software again... It takes forever...
All I'm looking for is the correct string for the registry that I attached.
Thanks.
dharvey4651 said:
All I'm looking for is the correct string for the registry that I attached.
Thanks.
Click to expand...
Click to collapse
I'd be happy to help you but I can't see any attachment, pls check your first post.
risidoro said:
I'd be happy to help you but I can't see any attachment, pls check your first post.
Click to expand...
Click to collapse
My apologies, my computer was acting up and I attached the file but it must not have actually attached. It should be there now. Thank you for helping me.
I can't find something similar in my registry. Wm6 registry is different than wm5 one. Can you post both the 10 button comm manager cab and the cab with the registry modification? I'll work on it tomorrow morning, now i'm going to sleep.
bye
Here are the attachments you requested. I do not have a cab for the comm manager with the registry tweak though, it was just a registry that was supposed to fix the WIFI problem with the 10 button Touch comm manager.
I will attach everything I have below for you to look through.
EDIT:: Nevermind. My impatience caused me to go against what I originally wanted and I hard reset and just reinstalled everything... I hate doing that though. I have so much on my phone that it kills me to have to go through and reinstall everything.
Did anyone else read that headline as "My WIFE is DEAD!!!!"?
Thats pretty funny... I don't have a wife but that would be pretty sh**ty if I posted that here if that were the case... LOL
hehehe funny **** , cause i have 22 inch screen , and the fonts are kind of small ... anyway i'm glad your wife is alive
dharvey4651 said:
EDIT:: Nevermind. My impatience caused me to go against what I originally wanted and I hard reset and just reinstalled everything... I hate doing that though. I have so much on my phone that it kills me to have to go through and reinstall everything.
Click to expand...
Click to collapse
Sorry for having not helped you in time... Sometimes, however, a complete format is the only way to solve MS OS's problems!
bye
risidoro said:
Sorry for having not helped you in time... Sometimes, however, a complete format is the only way to solve MS OS's problems!
bye
Click to expand...
Click to collapse
Thats what I figured. Thanks anyway.
I have created my first ROM using Alex's tutorial and after several attempts, there a number of recurring problems that I cannot seem to solve. First, everytime the Kaiser performs a reset, it never starts back and I end up having to do a soft reset. A notable example of this is after windows does the initial customization or when the Kaiser attempts to reset after installing a .cab that requires it. Secondly, the bluetooth explorer never seems to work. I'll tap the icon and I see the wait screen icon but nothing happens. Next, I cannot get two cabs properly configured into package, the Vista Cube (made by Poorly Duck) and the second being HTC Action Screen. The Package Builder gives a registry error for the Vista Cube and a .DHM error for the latter. If it would help, I can post up the exact messages given for the aforementioned programs.
xkam8x said:
I have created my first ROM using Alex's tutorial and after several attempts, there a number of recurring problems that I cannot seem to solve. First, everytime the Kaiser performs a reset, it never starts back and I end up having to do a soft reset. A notable example of this is after windows does the initial customization or when the Kaiser attempts to reset after installing a .cab that requires it. Secondly, the bluetooth explorer never seems to work. I'll tap the icon and I see the wait screen icon but nothing happens. Next, I cannot get two cabs properly configured into package, the Vista Cube (made by Poorly Duck) and the second being HTC Action Screen. The Package Builder gives a registry error for the Vista Cube and a .DHM error for the latter. If it would help, I can post up the exact messages given for the aforementioned programs.
Click to expand...
Click to collapse
Might be easier to compare your packages with a known good one, or just replace the "broken" one with the working one, if you'd prefer.
I've attached the Bluetooth Explorer and HTC New Action packages from Alex's kitchen below. I've used both and they definitely work. I've also attached the HTC New Action package with the graphics modified to PoorlyDuck's Vista theme, again I've used this and I know it works too.
Good luck.
Thanks, Ill download these and post the results back soon. BTW, is there anything I could do for the problem of the kaiser not wanting to turn back on after it is reset. For example, after windows does the "3 second customization thing" after a fresh install and then resets, my kaiser never turns back on. (I end up having to do a soft reset) I noticed that I never had this problem with the original stock ATT ROM but experience this problem with HTC based ROMs or many cooked ROMs.
xkam8x said:
Thanks, Ill download these and post the results back soon. BTW, is there anything I could do for the problem of the kaiser not wanting to turn back on after it is reset. For example, after windows does the "3 second customization thing" after a fresh install and then resets, my kaiser never turns back on. (I end up having to do a soft reset) I noticed that I never had this problem with the original stock ATT ROM but experience this problem with HTC based ROMs or many cooked ROMs.
Click to expand...
Click to collapse
There was one ROM released that had a reset-bug which sounds like the one you're referring to - look out for any ROM based on the 3.03 WM6.1 ROM (all others should be OK - such as 3.02 and 3.08).
EDIT-
Upon spending some time analyzing why the Vista Cube wont work, I narrowed it down to the registry file (.rgu) I looked at the errors and pinpointed them down to "Param"="-service """Activesync" and "Param"="-service """SMS". I removed the -service with a "NULL" and the package worked fine. Is there anyway to correct it without changing the paramaters to NULL. The only solution that I could think of was to create the packages using the "NULL" paramater and then after flashing, going into the registry and changing them back to their original settings. But as many others have cooked the Cube into their ROM, I'm sure there's another solution. Can anyone guide me in the right way. Sorry for all the questions X_X
Having installed Dutty's WM6.1.5.2.19209 I installed Resco keyboard.
I cant select the Resco keyboard - Transcriber and Symbol pad can be selected, but if Resco keyboard is selected it immediately goes back tp PCM.
I've tried all the suggestions I can find in these forums:
1.) Installed Default IM Selector (selected Resco, then soft reset)
2.) Installed SIP Change (selected Resco the soft reset)
3.) Start > Settings > Input (selected Resco...)
No effect. Any ideas?
yes I got any problem with Duttys_WM6.1_5.2.19400_1_64.08.21[Cube] rom
<Mean>
You obviously didn't read Dutty's thread before flashing this ROM.
</Mean>
If you browse to the appropriate Dutty thread, I guarantee you that within 6 posts from the top (hint: LOOK AT POST 5), you will find your solution. In the future, please check the thread for your ROM before creating a new thread. It is highly likely that someone has already run into your issue, and the solution is posted in there.
i have the same issue and have read the thread but it still doesn't work
Download the 3 files attached in Post #5, then follow the instructions in Post #1185.
I think your comments were a tiny bit mean, but understandable as a lot of people don't read the threads before asking the same question over and over again.
Sadly, I have been reading threads for days now, searching for every keyword I can think of, followed the instructions (including installing SIP Change. Select which keyboard you want. Then install Default IM Selector. The select the same keyboard. Then soft reset.) and I still can't get it to work. Maybe I'm doing something stupid, so here is what I've tried in full:
1) Initial preparation...
Start with a SIM unlocked TYTNii from Orange (Kaiser130)
PIM Backup
HARDSPL - didn't work (white screen) so tried JumpSPL1.56-kais.exe
JumpSPL1.56-kais.exe didn't work either so tried JumpSPL1.93-kais.exe
JumpSPL1.93-kais.exe worked fine.
Flash hard SPL using KaiserCustomRUU
2) Flashed Dutty's ROM
http://rapidshare.com/files/107917203/Ruu_Signed_Duttys_WM6.1_Official_5.2.19209_1_58_16 _27__FIX_.zip
As I type the following, I'll repeat each action so that I can document each message and behaviour accurately...
3) Hard Reset - everything looks great, but I don't like the size of the keys on PCM keyboard
4) I install Resco Keyboard using .exe from pc with usb connection.
There's an option to install as the default keyboard so that remained ticked. At the end of the install, there's a message "Unable to initialise the Resco Keyboard. Input method will be activated after the next soft-reset".
Soft Reset.
5) Test by opening Tasks application
6) Now that's really annoying, as it works straight away this time. Without having to run SIP Change or Default IM Selector. The only difference is that I haven't installed other software first.
So, thanks for your response which in a round about way fixed the problem!
Unfortunately Dutty's Apr 09 ROM saw many people running into your problem even after running the 3 CAB files posted by AllTheWay. Sometimes it took several times running thorough the steps until the change finally stuck.
I have the same annoying issue. I have tried many solutions to solve it, but all failed. who can give me the accurate answer? thx
It seems far too random to me. I wonder if anyone has a technical explanation of why trying it a few times seems to work.
[ Er, no I haven't searched the forums this time ;-) ]
You all know that this should have been in Dutty's thread in the first place. No need to continue posting in it.
Hi I have problem permanently hide SIM contact.
I used registry editor and made this chage:
HKEY_CURRENT_USER\ControlPanel\Phone
"ShowSim"=dword:0
It works perfectly until I made soft reset. After soft reset went the value ShowSim back on 1 and I see the SIM contact again.
Am I doing something wrong ? I made many others changes in registry which are without change after soft reset.
Please help.
Many thanks
ROM 1.90.401.1 WWE
Radio 1.02.25.19
Change the value to 0,close properly regeditor(menu-exit) and softreset using some software utility or hold power key for power off. Don't use hardware reset button!
Hide SIM contacts with
You can hide contacts with Advanced Config It really works even after soft reset...
This is strange, bud I tested all and it comes allways back on "1" after soft reset.
Do I need to do some unlock to be able make changes in HKEY_CURRENT_USER ? Other modifications in registry was permanent...
Thanks
heba said:
This is strange, bud I tested all and it comes allways back on "1" after soft reset.
Do I need to do some unlock to be able make changes in HKEY_CURRENT_USER ? Other modifications in registry was permanent...
Thanks
Click to expand...
Click to collapse
This also happens on my device, have tried changing this in AC and editing the reg, but with a soft reset it comes back
This program should help (it has been written for diamond).
http://forum.xda-developers.com/showthread.php?p=2413858
ThomasNM's advice worked for me
Great ! NikiSimFix is working perfectly !!!
Problem was already mentioned by me couple of pages below.
Registry settings doesnt help as well as Advanced Config.
NikiSimFix.cab solved this issue.
B.
bzdziagwa said:
Problem was already mentioned by me couple of pages below.
Registry settings doesnt help as well as Advanced Config.
NikiSimFix.cab solved this issue.
B.
Click to expand...
Click to collapse
I'm lost, I've tried this just now and again they keep coming back I really don't know what else to do now
It MUST be performed like this (try to not ommit any step)
1.Change known registry value to 0
2.Install NikiSimFix patch
3.SHUT DOWN TP - don't perform Soft Reset - SHUT DOWN TP.
Now....it works
B.
bzdziagwa said:
It MUST be performed like this (try to not ommit any step)
1.Change known registry value to 0
2.Install NikiSimFix patch
3.SHUT DOWN TP - don't perform Soft Reset - SHUT DOWN TP.
Now....it works
B.
Click to expand...
Click to collapse
I just don't get it anymore....
After doing all these steps it just won't work.
In my contact list I can see still all my contacts twice.
True my mobile shell I can see my contacts twice...
ONLY with my spb diary I see them once....
Really really strange.. who gets this?
@ Pensador:
have you tried this already?
http://forum.xda-developers.com/showpost.php?p=1769534&postcount=2
Offtopic and in Dutch:
hey iemand van de TouchPro Hyve
heey thnx 4 your reply...
No I didn't try that one because I don't want to erase everything on my sim...
Just a precaution....because if someday ( only god knows when ) my device crashes of whatever....I will loose all my contacts....and that's something i do not like...
@ offtopic in dutch:
hehe, jah leuk eh. Maar ik denk dat wel meerdere van hyves hier op t forumpje zitten hoor .
it does not erase your simcard haha! (that would be stupid) it just stops your device from constantly looking @ your simcard and make double contacts in your phonebook
(but it never hurts to make a backup just in case..... Don't you have your contacts sync. in outlook???)
no solution mentioned above working here either. nicksimfix wouldn't do it
For those who can't get this working, which ROM are you using? NikiSimFix worked fine for me on the stock ROM, but I've tried everything on DCS V13 and V14 ROMs and nothing works.
Interestingly if you make the registry change and you don't use TouchFlo 3D then this is fine, but as soon as TouchFlo starts the SIM contacts reappear. What I have found is that if you make the registry change after a soft reset the SIM contacts will remain hidden until the next soft reset (or until you manually restart TouchFlo).
I made a .reg file to do this quickly (below), but I would still rather find a permanent solution.
Rowan
Xtreme XL said:
it does not erase your simcard haha! (that would be stupid) it just stops your device from constantly looking @ your simcard and make double contacts in your phonebook
(but it never hurts to make a backup just in case..... Don't you have your contacts sync. in outlook???)
Click to expand...
Click to collapse
ahh allrighty...I misunderstood it then...
But also this fix didn't work 4 me...
Get a little bit tyred of it now....I just don't understand why I still can see all my contacts twice!
I will explain what I did...
I did the setting in AC, then I checked the setting in DT after that I checked the setting @Regiustry editor... So now knew 4 sure everything was off.
I runned my .cab and after that I turned my tp down.. no reset but just turned it down...
didn't work.. also didn't work witrh a soft reset...
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
iRiKi said:
Hide SIM Contacts: HKCU\ControlPanel\Phone - create a new DWORD value named "ShowSim" and set it to 0
Click to expand...
Click to collapse
THNX 4 your reply! but It still doesn't work!
I think I tried about everything right now!
4 the people who maybe have a solution....I use spb mobile shell....
Hello,
No matter what application I would try to install, it would fail right away. I thought that maybe the last application I installed was the problem, so I went to uninstall it from the settings menu. When I got to the Remove Programs list, it was empty! I cannot install or uninstall applications!
The last program I was able to install was this: http://wmpoweruser.com/?p=3646
Can anyone help me fix this, or will I need to hard reset?
I gave up and just did a hard reset.
SKTools
Hi
for anybody else still facing this issue, SKTools may help you.
Cheers
andrew-in-woking
i have same problem, i do tweak registry settings, but haven't for about 2 weeks before this problem happened. tried to use sktools to uninstall programs, but same result.
any suggestions? i do have a registered install of sktools for smartphone.
btw, im using a BJII with 6.1
Also, just realized i cant access the "about", "Accessability", or "owner info" info in "settings", it gives me "ERROR The settings could not be opened"
however, "version" and some others in the "settings" menu work fine (i haven't gone thru and tested all of them)
I have already performed a couple soft resets, with no change. seems like something pretty basic is F'ed. any ideas would be appreciated, i am planning to hard reset tonight if i dont get this taken care of...... So so much to re setup/install.... :-(
i did a hard reset, reflashed my bjII to the most recent 6.1 ROM. and now it is doing the same thing AGAIN!.
i have done no registry mods besides unlocking the keys ATT tries to restrict for their ghey medianet/cellularvideo links. and that has NEVER caused any issues before.
i Have installed:
NETCF3.5
Live Search
LEDAlertsSP
GoogleMapsMobile
Resco Explorer
Opera
SKTools
Increase Ringtone size to 25mb
the only app i haven't tried before is Twikini (a twitter app) it seems to work perfectly, but it is the only thing i have not had on my phone for an extended period of time.
Anyone with advice on how i can go about finding out what the real issue here is please lemme know.
PrettyPistol555 said:
i did a hard reset, reflashed my bjII to the most recent 6.1 ROM. and now it is doing the same thing AGAIN!.
i have done no registry mods besides unlocking the keys ATT tries to restrict for their ghey medianet/cellularvideo links. and that has NEVER caused any issues before.
i Have installed:
NETCF3.5
Live Search
LEDAlertsSP
GoogleMapsMobile
Resco Explorer
Opera
SKTools
Increase Ringtone size to 25mb
the only app i haven't tried before is Twikini (a twitter app) it seems to work perfectly, but it is the only thing i have not had on my phone for an extended period of time.
Anyone with advice on how i can go about finding out what the real issue here is please lemme know.
Click to expand...
Click to collapse
Hello I think it wasnt necessary, I had the same problem twice, and flashed it again, and restored the rom and it keeped on non working. So the first thing i did was to unmount the sd card and mount it again and it worked for a while.
Afterwards I format microSD card- FAT32, other guy wrote in a forum with 4096.
here is the link hope it works for you
http://forum.xda-developers.com/showthread.php?t=1124590