Database Info

Wifi problems? - Try this

MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\Parms\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\Parms\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.

papamopps said:
MAny people telling about problems with wiffi turn on:
- Not available by clicking on "g"
- not available to remap to hardwarebutton
- Not recognizing after pushing by commmanager
This comes up in several ROMs and I mentioned a soulution in many threads.
For some it works,for some not.
Just give it a try:
HKLM\Comm\TnetWln1\HTCPreloadStatus --> 1
HKLM\Comm\TnetWln1\HTCPreloadWifi --> 1
and check if WifiInit.ink is in \windows\startup folder.
Please tell me with which ROM it works and for which not.
Thank you.
Click to expand...
Click to collapse
This did the the trick for me running NottoSmart Vanilla. I had wifiinit.lnk in startup, it was the reg key values that did the trick for me.
I don't have any SPB programs installed, although I did try one out, but then uninstalled it, so maybe that is what "broke" itm since I know wireless was working when I installed the ROM. I currently have the following programs installed if that helps...
Voice Command 1.6
Pocket Mechanic
Sharkey Softkey Changer
JamDat Worms
Registry Wizard
Battery Status 1.3 beta
Live Search
TOtal Commander
CorePlayer
CoolCamera
Treo Picture dialer
SP TimeSync
PQzII Wizard
Phone Alarm with B&W Pure skin
Foxit PDF
Tascal CloseAll
THANKS!!! for figuring this out!

Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?

zoki said:
Just to be sure, are the correct values in HKLM\Comm\TnetWln1 key or in HKLM\Comm\TnetWln1\Params?
Click to expand...
Click to collapse
Sorry, sure it is Parm I edit in first Post.
Thanks
(I answerd this settings so often that I now wrote it wrong)
Sorry to all searching the wrong settings - now it is right in first post.

Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.

HTCPreloadStatus doesn't stick?
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy

ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Here is my experience. I was having intermittent inability to enable WiFi. Sometimes this was rectified with a soft reset, other times not. I checked the two keys and they were both set to zero.
I applied the changes and re-booted after waiting awhile. I noticed that the WiFi came on after reset without having to enable it. I am running mUn with the collected fixes from NotTooSmart.
I have since toggled and re-toggled and re-booted my Wizard and all seems well. However, HTCPreloadStatus is set to zero on mine regardless of whether the WiFi is on or not.
It is all working though.

zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).

ADB100 said:
In my current ROM HTCPreloadWiFi is already set to 1 and HTCPreloadStatus is set to 0. If I change HTCPreloadStatus to 1, exit the Registry editor, leave it for a while and soft reset it always reverts back to 0. I have verified the change is being made by exiting the Registry editor and then opening it again and checking and it does indeed say it's set to 1. However a soft-reset later and it's back to 0.....
Andy
Click to expand...
Click to collapse
Have you tried to softreset by switching off with 5sec Powerbutton? And the turn on again?

zoki said:
Here's the cab file for those who doesn't want to search registry. If there's no improvement, simply uninstall it to restore previous state.
Click to expand...
Click to collapse
Thanks!!!!!
I allways have problem creating a cab file with WinCECabmanager.
Is there a how to somewhere?

I just cant install the new comm manager.
mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
Hi there m8. I just couldnt install the new comm manager. I just upload it to my device and try it to install in the main memory but i just cant.
This is weird. :s
Any advice ???

Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?

Yes... that did it.
mfrazzz said:
Yep, that is weird. Went right onto mine with no issues, and I'm also running XPlore 1.1. Have you tried doing a soft reset and then loading it again? Maybe putting the cab directly on your phone and then running it from your phone?
Click to expand...
Click to collapse
It was very strange. I did copied the cab into the phones main memory, executed and voila.
Thankx m8

mfrazzz said:
Thanks for this and the pointer to the 10 button comm manager screen. After installing the new comm manager, doing the reg fix for that, and then applying this cab, it appears my Wifi starts up each time with no issues (in the minimal testing I've done over the last couple of hours).
Click to expand...
Click to collapse
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?

dcdivenut said:
I realized I was having the same problem, came back and, VOILA, there is already a solution to the problem of the solution!
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?
Click to expand...
Click to collapse
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.

papamopps said:
Don´t mind but what about starting a new thread for the link and the problems with commmanager and the other programs.
Don´t be worry.
Click to expand...
Click to collapse
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?

dcdivenut said:
Uh, isn't the commmanager question directly related to the thread since it was proposed as a solution to not have the registry values persist?
Click to expand...
Click to collapse
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.

papamopps said:
The commanager was asked for by people using xplore and don´t like green commmanger.
It might be a soulution.
Everything what would help is wellcome. But the thread started to get bigger and bigger discussion several problems.
It was started to evaluate the function of the registrysettings.
Click to expand...
Click to collapse
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?

dcdivenut said:
Right, and it was determined that the registry settings work, but only temporarily, since they go back to 0 after a second soft reset. from what I understood, installing the different comm manager either allowed the settings to persist or made them irrelevant, which is why I thought a discussion of taht belonged in this thread. Am I completely wrong in the above assumption?
Click to expand...
Click to collapse
"Also, this may be mild hijacking, but has anyone tried the other cabs in that post, specifically the sim manager and bluetooth file transfer?"
That was mentioned by me.
To your question. My settings stay even after softreset. Do you change it and turn off device by powerbutton for 5seconds? For this ever works regarding to reghacks.
Didn´t wanted to stress you. Discussion is the way this forum lives!

dcdivenut said:
However, I seem to be a little dense today but I cannot figure out what 10 button comm manager screen was pointed to.
based on the screen shots from the following post and using google I found this post in the Hermes forum that seemed to have the file specified, but I wanted to check before I installed something ported from the trinity to the hermes on a wizard
http://forum.xda-developers.com/showthread.php?p=1207712
Click to expand...
Click to collapse
Yes, thats the one. But for the wizard there is a reg key you have to remove or it breaks your Wifi. Please look at the XPlore thread for discussion on this (or as suggested, start a new thread specifically about the 10 button comm manager. It probably needs a seperate thread anyway).

Contact list wont load?

Hi everyone i know im new here.
just been a nosey person before checking in on whats happening.
i decided to flash my MDA Vario. ive tried two different packages now.
Core_2.0n
XM6r3
but on both of them i get the same problem, my contact list wont load.
if i hit contacts it goes to load and shuts it again, i dont understand why?
would anyone care to share some light on the subject, or even better
have a solution lol !! i dont really wana go back to WM5 now.. but
not being able to add numbers, or get into my contacts is rather anoying!
-Groovedude

groovedude said:
Hi everyone i know im new here.
just been a nosey person before checking in on whats happening.
i decided to flash my MDA Vario. ive tried two different packages now.
Core_2.0n
XM6r3
but on both of them i get the same problem, my contact list wont load.
if i hit contacts it goes to load and shuts it again, i dont understand why?
would anyone care to share some light on the subject, or even better
have a solution lol !! i dont really wana go back to WM5 now.. but
not being able to add numbers, or get into my contacts is rather anoying!
-Groovedude
Click to expand...
Click to collapse
Did you backup your contacts before upgrading and then restored back to your phone again after upgrading ?

By backup, I hope you mean via activesync?

no i didnt make a backup .. at all. do i need to make some kind of backup then to get the contacts menu to work???
as i cant even access the menu it goes to load but shuts itself ?
btw thanks guys for replies..

Oh dude, just hard reset your device. It'll be fine.

did you install pocketcm?
does your sms inbox still work?

ive tried hardreset... no difference.
yes my sms inbox works fine, this was with pocketCM and normal contacts list.
-Groovedude!

just go into the file explorer go to my device look for the pim file and rename it. then soft reset your device. it should work after that

does it matter what i should rename it to ?.... ?

i renamed the pim file to "c" soft reset... and HEY presto it works thank you everyone.
big thank you to thunda_chunky

no prob =] same thing happened to me b4

awesome just gotta setup my tmobile settings for mms etc now !

I've never seen this problem before... unable to install/uninstall applications?

Hello,
No matter what application I would try to install, it would fail right away. I thought that maybe the last application I installed was the problem, so I went to uninstall it from the settings menu. When I got to the Remove Programs list, it was empty! I cannot install or uninstall applications!
The last program I was able to install was this: http://wmpoweruser.com/?p=3646
Can anyone help me fix this, or will I need to hard reset?

I gave up and just did a hard reset.

SKTools
Hi
for anybody else still facing this issue, SKTools may help you.
Cheers
andrew-in-woking

i have same problem, i do tweak registry settings, but haven't for about 2 weeks before this problem happened. tried to use sktools to uninstall programs, but same result.
any suggestions? i do have a registered install of sktools for smartphone.
btw, im using a BJII with 6.1
Also, just realized i cant access the "about", "Accessability", or "owner info" info in "settings", it gives me "ERROR The settings could not be opened"
however, "version" and some others in the "settings" menu work fine (i haven't gone thru and tested all of them)
I have already performed a couple soft resets, with no change. seems like something pretty basic is F'ed. any ideas would be appreciated, i am planning to hard reset tonight if i dont get this taken care of...... So so much to re setup/install.... :-(

i did a hard reset, reflashed my bjII to the most recent 6.1 ROM. and now it is doing the same thing AGAIN!.
i have done no registry mods besides unlocking the keys ATT tries to restrict for their ghey medianet/cellularvideo links. and that has NEVER caused any issues before.
i Have installed:
NETCF3.5
Live Search
LEDAlertsSP
GoogleMapsMobile
Resco Explorer
Opera
SKTools
Increase Ringtone size to 25mb
the only app i haven't tried before is Twikini (a twitter app) it seems to work perfectly, but it is the only thing i have not had on my phone for an extended period of time.
Anyone with advice on how i can go about finding out what the real issue here is please lemme know.

PrettyPistol555 said:
i did a hard reset, reflashed my bjII to the most recent 6.1 ROM. and now it is doing the same thing AGAIN!.
i have done no registry mods besides unlocking the keys ATT tries to restrict for their ghey medianet/cellularvideo links. and that has NEVER caused any issues before.
i Have installed:
NETCF3.5
Live Search
LEDAlertsSP
GoogleMapsMobile
Resco Explorer
Opera
SKTools
Increase Ringtone size to 25mb
the only app i haven't tried before is Twikini (a twitter app) it seems to work perfectly, but it is the only thing i have not had on my phone for an extended period of time.
Anyone with advice on how i can go about finding out what the real issue here is please lemme know.
Click to expand...
Click to collapse
Hello I think it wasnt necessary, I had the same problem twice, and flashed it again, and restored the rom and it keeped on non working. So the first thing i did was to unmount the sd card and mount it again and it worked for a while.
Afterwards I format microSD card- FAT32, other guy wrote in a forum with 4096.
here is the link hope it works for you
http://forum.xda-developers.com/showthread.php?t=1124590

Help! Problem with windows mobile 6.5

I am repeatedly facing the following problem.
When a call arrives, the contact pops up on the screen almost immediately, but it takes around 5 or 6 rings from the callers end for me to hear the ring on my phone.
Eg. You call me and i will see your name on my screen but it will seem for you as if i picked your call only after 6 rings, but only then my phone rings!! HELP me a lot of people are complaining that i am not picking the call immediately due to this...
Never faced this problem in wm 6.1 or earlier versions.
Somebody kindly assist me
Thanks in advance.

Hi !
I had the same problem. I think it happened when the screen was locked.
It got better after upgrading to a 23001 build.
Which build do you have on your phone?
greetz

Hi flushbeer! Thank you very much for your prompt response! Appreciate it.
I am using [July 4th][PDACorner] Ultimate-X2.V5 -23001|M2D|CHome|Enhanced Version
I even tried TPC Elite prior to that!
And yes u r right i think it happens when screen is locked. Even otherwise i think it happens.
Am using the 23001.x build only!
Thanks again buddy!

Weird... I use the same ROM and this is the FIRST ROM where I don't have this problem.
(I tried many 6.5 ROMs before and with all of them I had this Problem)
greetz

Sorry guys please read the rules, if you have problems post on the threads where you get your ROMs
Mods, please close this thread

sorry guy...
but i don't think this problem ist rom related.
in my opinion it ist build-related and therefore a more or less generic problem.
but it's not my thread anyhow

Hey it aint fair, nobody answers my question anywhere (( If only anyone can answer this.

Maybe it's becoz you are running some software that is not compatible with WM65. Like some builds of MS Voice Command. But you have to sort it out by yourself.
Edit: The way to find problem apps for your ROM:
Backup all your data;
Hard reset;
Install your apps one by one;
Every time after installed a new soft, soft reset, and check the problem occurs or not, if not, install next one, soft reset and check again, until you got the problem occured again.
Then you know it's the last installed app crashes with something. (Maybe not crash with the ROM, but other apps installed before it. To sort this out, you have to change the sequence of cab install and test again. For example, after already know the probs app, hard reset and only install this see what happen.)
What if you did not find it until installed last app? Congratulations, you already solved the problem.
This is the most foolish(time consuming) way, but it works on most cases for probs sorting.
Edit2: BTW, last time when I have similiar probs as yours, by using above-mentioned method, I sorted it out that it was caused by MSVC. (Edit3: Also if my memory is still correct, another badass for WM6.5 maybe the WM6.5 lockscreen,)

What radio are you using? Did you change radios and see if that makes a difference?

problems with wifi and marketplace.

hey guys i havent had any problems with this phone until today, and it seems like these have both started happening at the same time..
but when i turn wifi on, it connects and then a few seconds later disconnects. and when i try to go to the marketplace it says server unavailable, please try again.
also i sometimes i cannot find webpages on the browser. any ideas whats up with this?

hey guys, do any of you have a copy of the original setup.db file?
I'm pretty sure that is what is wrong with my phone..
when i was messing with mine, i messed up and changed the wrong thing with out noticing it before replacing it and now i can not access the marketplace or use wifi..
so if anyone has that file i can use i would really appreciate it.

Do you have an application named Navizon?
If so delete it.
I don't think i have the original setup.db?
Explain? I have no idea what you're talking about I'm pretty noobie about android.

accinfo said:
Do you have an application named Navizon?
If so delete it.
I don't think i have the original setup.db?
Explain? I have no idea what you're talking about I'm pretty noobie about android.
Click to expand...
Click to collapse
thanks for replying, but i got it to work.. i just went in to recovery mode and cleared the cache and its working great again..