[Q] stuck at AT&A after flashed clean rom with odin, weird!!! - Captivate General

Hello,
I have weird problem with my Samsung captivate.
I install a new rom on my device and it work well for several hours but than it suddenly stop to work.
After a reset my device get stuck on the at&t screen.
I entered the download mode and flashed clean rom with odin (and check the Master Clear option).
But it still get stuck on the at&t screen.
Is this can be hardware problem?
Is there any way to get the log file from the boot to find out what is the problem?

Double post
Sent from my GT-I9000 using XDA Premium App

matsog said:
Hello,
I have weird problem with my Samsung captivate.
I install a new rom on my device and it work well for several hours but than it suddenly stop to work.
After a reset my device get stuck on the at&t screen.
I entered the download mode and flashed clean rom with odin (and check the Master Clear option).
But it still get stuck on the at&t screen.
Is this can be hardware problem?
Is there any way to get the log file from the boot to find out what is the problem?
Click to expand...
Click to collapse
If you can get in recovery, do a factory reset.
Also, you can reflash with Odin3 one click downloader. If you get the AT&T boot loop again, remove the battery, wait 5min.. and turn back on your phone.
Don't forget that after a flash it can take quite a while before the phone boots up as it has to rebuild his dalvik cache.

You can use UART to get the information.
Here's my setup. This is still a work in progress.

adam, i got some stuff to make those connectors but i think it's gonna have to wait till after finals. just a couple weeks and ill let you know if i have any luck.
the .008" endmills i need are $24 each, god forbid i break one! i can try a .010"endmill to keep the cost down(i found .010" endmills for about $10 from a different supplier). but then the contacts will be .005-.006" wide not .008" and are more likely to break and pull off the board in the process. im gonna try something else first, maybe it can still be done chemically if i'm carefull.
then you should have what you need to jtag the phone so you can test this more fully.

Dani, this is not the right topic, however thank you.

Related

i haz brick

well today I decided to flash some different roms to my infuse. Apparently my phone doesnt like being abused and flashed several times in one day (lol)
I can still boot into recovery and load a rom. The phone loads everything, but when I try to reboot it just shows "samsung" on the main screen. It doesnt boot loop, it just constantly shows samsung... I let it sit for about 10 minutes and the screen never changed. What is an easy fix for this? I am using the Atrix2 right now (terrible phone) and want to get my infuse up and running again...
http://forum.xda-developers.com/showthread.php?t=1336359
^can this be used? I am not really sure what to do... The phone isnt really "bricked" it just wont boot.
I appreciate any advice
j.aussie said:
well today I decided to flash some different roms to my infuse. Apparently my phone doesnt like being abused and flashed several times in one day (lol)
I can still boot into recovery and load a rom. The phone loads everything, but when I try to reboot it just shows "samsung" on the main screen. It doesnt boot loop, it just constantly shows samsung... I let it sit for about 10 minutes and the screen never changed. What is an easy fix for this? I am using the Atrix2 right now (terrible phone) and want to get my infuse up and running again...
http://forum.xda-developers.com/showthread.php?t=1336359
^can this be used? I am not really sure what to do... The phone isnt really "bricked" it just wont boot.
I appreciate any advice
Click to expand...
Click to collapse
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1331381
Try a battery pull, also wipe cache/dalvic, restore.... If that doesn't do it...ultimate unbrick
Sent from my SAMSUNG-SGH-I997 using XDA App
Get the Odin one click to stock
Sent from my SAMSUNG-SGH-I997 using XDA App
Not bricked. If the screen turns on you're not bricked.

[Q] Sidekick 4G Bricked!!!!!!! odin dosent work

tried installing glorious overdose but I tried to wipe data, and it stayed there for about 10min so i pulled out the battery. i tried a second time but without wiping data (i didnt know WTH i was thinking) so it rebooted and was stuck at boot screen saying create new partition and system not avaliable (sumthing like that) so i decided to try odin so i can go back to stock firmware and it finished and now it stays at the bootscreen blinking i tried recovery im stuck.
before you odin, reinstall the phones drivers on your pc. connect the phone to the pc without the battery, hold the volume down button and the trackpad and reinsert the battery. when you odin, make sure only auto reboot is checked, and put the pit file in the pit slot and the tar file in the pda slot. if you use kies to update firmware, reinstall drivers again before updating.
You may need to check "Re-Partition" in Odin.
shouldnt need to repart, in fact it may be a bad idea. every time i odined and accidentally had repart checked, it screwed something up. most recently the stock messaging app didnt work after odin. i have since switched to go sms, but still made sure i had a clean firmware install. i would try odin without repartitioning first and see how that goes. if something is wrong, you can always odin again. the first time i tried to flash a rom i bricked because i flashed cwm through rom manager. the thread where i found the odin file said make sure only auto reboot is checked. besides, if the rom didnt flash correctly, then it didnt convert any partitions anyway.
ok i had the same problem for the first time i tried to install a custom rom, theres a way that you can fix it with out odin. follow this steps... i promise it will work.
1)boot into the red cwm voodoo lagfix recovery
2)wipe data/factory reset
3)wipe cache partion
4)after all the steps above are completed, go to apply sdcard:update.zip
the its going to take you to the regular cwm once there follow this steps...
1)install the custom you want to install, but make sure that it doesnt need special mounts and unmounts, so follow the instruction flash the rom and it should fix it
Heimdall worked perfectly when I bricked my phone.
Thank you!! ^ I was boutta cry when it was Rebooting .... Yea I guess I messed something up with odin
WolfV2 said:
Heimdall worked perfectly when I bricked my phone.
Click to expand...
Click to collapse
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
flashing bootloader in that package doesn't break it.
creid2352 said:
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
Click to expand...
Click to collapse
My advice is do whatever it takes, and besides, don't worry about breaking something that's already broken, if you know what I mean...
johnwazhere said:
Thank you!! ^ I was boutta cry when it was Rebooting .... Yea I guess I messed something up with odin
Click to expand...
Click to collapse
No problem, glad I could help
creid2352 said:
I tried the method above but ater reboot it stays on the T-Mobile Sidekick 4G boot screen and does nothing else. I'm hesitant and Flash Bootloader but what do you all think?
Click to expand...
Click to collapse
This is my current problem as well, except I have tried checking flash bootloader and have also tried Odin, but all to no avail. Can anyone help me? This is my situation:
I've had my sidekick for about a year now and have gone through the typical problems of a sidekick user. Then yesterday, my sidekick's alarm woke me as normal, but I was unable to turn it off because my touch screen wasn't working. So i battery pulled, restarted, and noticed that the screen stayed on the "T-Mobile Sidekick 4g SAMSUNG" start up screen and did not budge. I tried battery draining, more battery pulling, and nothing worked. So i did a lot of research on here and other websites and decided to use Odin. After initial problems of a newbie, I eventually figured it out and got it to RESET and PASS, but the subsequent reboot only caused my phone to be stuck in the same Sidekick start up screen it has been getting stuck in. Similarly, after many tries, Heimdall has done the same for me. Sorry if that was a long read (also, I hope its cool that i bumped this thread with my own problems), but is there anything else i can do? I'd really like to use my phone again..
I've been working for hours trying to figure out how to fix it, and I just don't know. The end result is always just the freezing at the t-mobile start up screen..Also, since i forgot to mention, I can only get into download mode with the volume down+trackball method because otherwise it would just go to the regular start up screen and freeze. I don't know if that means anything, but yeah.
Have you used heimdall yet? I bricked my SK4G the other day when flashing a rom and heimdall put it back to stock within 5 minutes of me bricking it.
Thank you for replying. Unfortunately yes, I did. With flash bootloader unchecked and checked. It says it disconnects after everything is done and it restarts, only to become frozen at the start screen again =/. I don't know if there is some silly detail that im missing that makes the flash rather than just restart, but all i can manage to make it do is restart.
Sigh. Guess im going phone shopping.
How did u get the phone in dl. Mode
Sent from my SGH-T839 using XDA
I had to plug the phone into my computer without the battery, hold volume and the track ball, then pop the battery in. Any other attempts would simply start it up/freeze it.
Ok did u have heimdall started first?
Sent from my SGH-T839 using XDA
And what rom did u last have?
Sent from my SGH-T839 using XDA
I'm not entirely sure if I had it started first, so I'll try it that way now. And the last ROM that I had? Honestly not really sure what that means =p, but i've never flashed one and I had the most recent sidekick update installed (though it is possible that I had done a factory reset at some point to fix an error).
---------- Post added at 01:04 PM ---------- Previous post was at 12:45 PM ----------
Just tried it. Without flashing bootloaders, it finishes and restarts to my frozen start up screen as normal. However, when i flash bootloaders, it gets to "uploading pit", but the upload fails and it reboots my phone. But this time, it reboots into download mode. A welcome change from my start up screen. Maybe there's hope.

[Q] Nexus S - can't mount anything! - stuck on Google Logo

Hello!
Okay, so the weirdest thing has happened with me. My Nexus S (i9023) was working absolutely fine till last evening when it ran out of battery. After I came back home, I put it for charging and switched it on.
For the first few time, nothing would show except the USB connected/ disconnected screen which appears everytime you plug your phone in. I thought maybe it was just being weird, so I took out the battery and booted it up again. This time I am just stuck at the Google Logo! It is not going ahead.
I can enter CWM Recovery. However, I cannot mount sd card or usb storage or anything for that matter. If I try and install through .zip it says 'e can't mount sd card'. I can't format my sd card either, same problem of can't mount. I thought if I tried pushing a ROM in by ADB that might work.. It did transfer the file it showed that in the cmd window. However, CWM refuses to mount my sd card or my usb storage.
So basically, in essence, I'm locked out of my Nexus! Please please help. I'm really lost and confused now.
Thanks so much.
Alex
Similar problems below in this thread with solutions.
Let your phone sit for an hour with the battery out, Download Wug's Nexus Toolkit from the development section, download drivers from there and install stock boot img then re-root.
I have never seen it before but seems like this prob is coming up a lot lately. It can be fixed. Good luck.
Sent from my Galaxy Nexus using Tapatalk 2
Nexism said:
Similar problems below in this thread with solutions.
Let your phone sit for an hour with the battery out, Download Wug's Nexus Toolkit from the development section, download drivers from there and install stock boot img then re-root.
I have never seen it before but seems like this prob is coming up a lot lately. It can be fixed. Good luck.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply. I'm starting now. I have a doubt, how do I install stock? Since I can't seem to be able to mount anything..
"It can be fixed" - few words have given me this much hope in my life! Thanks a lot!
EDIT: I guess you mean flash through ADB right? Okay, let me try that. I really hope you are right. Some of those other problems lead to paying up! Ouch.
Hey! I just tried using WUGS.. for some reason it does not make the final boot and instead says: 'Fastboot Status - FAILWrite Fail' -- oh god.. I'm trying it again now..
Is there any other way out? :/
Okay, so now my recovery is also gone after using WUGS.. oh man. And the phone isn't starting up. Please please please help? I'm getting really desperate now.
EDIT: And it sucks that I can't post in the WUGS thread (http://forum.xda-developers.com/showthread.php?t=1766475) because I have less than 10 posts! fml.
can you boot into fastboot? If so then itnwasnthe same prob I had when I wiped my phone and SD in recovery. If you can boot into fastbootnthen makensurenyou leave the batt out format least an hour. If you installed Wug's drivers the bottom left corner ofnfastboot should give a message.
Sent from my Galaxy Nexus using Tapatalk 2
Nexism said:
can you boot into fastboot? If so then itnwasnthe same prob I had when I wiped my phone and SD in recovery. If you can boot into fastbootnthen makensurenyou leave the batt out format least an hour. If you installed Wug's drivers the bottom left corner ofnfastboot should give a message.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Yes, I can get into fastboot - i'm leaving the battery out now - do you think i should try
fastboot erase boot
fastboot erase cache
fastboot erase recovery
fastboot erase system
fastboot erase userdata
and then flash everything again?
There is always a way to recover the nexus right? Even if it is hardbricked, right?
I really really appreciate your help.
I too have this problem but after a lot of battery pulls it does eventually start up. It just started happening all of a sudden. Ive heard that heating it up with a hair dryer or heatgun can help and also re-locking and un-locking the boot loader can help as it wipes the card. Could be worth a try.
Any luck Someone? I know it sux big time to feel like your phone is bricked. I am not a dev or expert but it sounds like the prob I had last week, when I posted no one replied so I ordered a GNex thinking all was lost. Before I activated my new phone I felt like I had to fix my nexus before getting started on my new phone and that's my situation. I don't want you to feel like the community has forgot you and thats why I'm trying to help. Were you able to get Wug's Toolkit to recognize your phone after leaving the batt out? I don't know why but I think that's the key. I had to leave mine overnight 'cause I don't have a PC and the next day at my friends house when I plugged the USB in I got that message at the bottom of fast boot "system normal" or something to that effect. Once recognized the stock boot IMG is what you need.
ANY ONE ELSE WHO HAS HAD THIS OR A SIMILAR ISSUE PLEASE GIVE SOME ADVICE. LET'S NOT LEAVE A COMMUNITY MEMBER WITH A LIFELESS PIECE IF PLASTIC. THANKS FORUM.
To set your mind at ease yes, I believe as long ad you have access to fastboot your nexus can be saved.
Sent from my Galaxy Nexus using Tapatalk 2
sounds to me like a hardware issue, since you haven't changed software and it seems like a brick. try flashing stock rom via fastboot, you should be able to google around how you can do that.
Blo0dyyy said:
sounds to me like a hardware issue, since you haven't changed software and it seems like a brick. try flashing stock rom via fastboot, you should be able to google around how you can do that.
Click to expand...
Click to collapse
Hi, if I'm not wrong essentially what WUG does automatically is what you do by fastboot (erase bootloader, cache, system.. and then flash all of them back) in both system fails to wipe and refuses to be flashed again (flashwrite error).
I don't want to lock it and then unlock it again because I read in other threads that it might lead to a permanent lock with an error for subsequent unlocking - that would leave me completely out.
Anyway, let's see - I've given it to someone to check it up. I'll keep you guys posted. He said he wanted to repartition the sd card.
My intuition says: hardware problem!
So I tried Odin today - and that also did not work it refused to flash the ROM. In the process I somehow managed to mess up the bootloader such that the phone would have some two lights on randomly when I switch on. It doesn't go into download mode either. I next plan to use JTAG to get the bootloader back and then reflash everything. Hopefully, that should sort things out. The Resurrection tool is amazing! I'll keep you guys posted.
Get it going someone?
Sent from my Galaxy Nexus using Tapatalk 2
I have the same problem as you, with the added difficulty of my phone not being recognized by anything other than fastboot. No ADB commands will function. It was charging, rebooted itself into a bootloop, and I have been struggling with it ever since. It is currently a worthless piece of plastic, my favorite phone ever, gone.
I can wipe and re-write recovery all that I want, but it seems as if the sdcard partition that /system and some other stuff writes too is either corrupted or physically damaged. Every time I flash it all via fastboot it all goes as stated, but gives me a fail message on the last two partitions and never allows me to actually write a new ROM or boot image. I wanted to try ODIN but can't seem to get it to recognize my phone in download mode...
Let me know if you have any success or progress!
someone. said:
So I tried Odin today - and that also did not work it refused to flash the ROM. In the process I somehow managed to mess up the bootloader such that the phone would have some two lights on randomly when I switch on. It doesn't go into download mode either. I next plan to use JTAG to get the bootloader back and then reflash everything. Hopefully, that should sort things out. The Resurrection tool is amazing! I'll keep you guys posted.
Click to expand...
Click to collapse
I myself am experiencing the same problem.... Did your cell got fixed.....?? Did JTAG worked kindly keep us posted em really concerned about it... coz your solution might get me some where or else i hav completely lost my phone ;(
Get it going someone?
Click to expand...
Click to collapse
Hey Nexism! Sorry for the late reply - things've been busy.
The JTAG is giving an internal voltage for some reason - so I've sent it for repair. It'll be repaired by tomorrow or so.. I'm then going to set it back up. It's all already soldered and all, just waiting for the JTAG. I think I've understood how this thing works now. So yeah, I'm hoping it's all sorted. Thanks a lot for your concern man.
I have the same problem as you, with the added difficulty of my phone not being recognized by anything other than fastboot.
Click to expand...
Click to collapse
Well my phone went blank - no fastboot mode - no download mode - no nothing - when i'd put the battery in randomly two of the four front lights would come on.. JTAG is going to solve the problem hopefully.
someone. said:
Hey Nexism! Sorry for the late reply - things've been busy.
The JTAG is giving an internal voltage for some reason - so I've sent it for repair. It'll be repaired by tomorrow or so.. I'm then going to set it back up. It's all already soldered and all, just waiting for the JTAG. I think I've understood how this thing works now. So yeah, I'm hoping it's all sorted. Thanks a lot for your concern man.
Well my phone went blank - no fastboot mode - no download mode - no nothing - when i'd put the battery in randomly two of the four front lights would come on.. JTAG is going to solve the problem hopefully.
Click to expand...
Click to collapse
So ladies and gentleman, JTAG also failed - apparently something was wrong with the sd card only. I got my motherboard replaced - luckily the guy I went to knew someone and Samsung and charged me Rs. 4,000 as opposed to the Rs. 8500 quoted by the Samsung Service Centre. Oh well.
Back on my Nexus now. XD
someone. said:
So ladies and gentleman, JTAG also failed - apparently something was wrong with the sd card only. I got my motherboard replaced - luckily the guy I went to knew someone and Samsung and charged me Rs. 4,000 as opposed to the Rs. 8500 quoted by the Samsung Service Centre. Oh well.
Back on my Nexus now. XD
Click to expand...
Click to collapse
I am with the same problem here... I cant turn off my phone or it get stuck in pre-boot phase. Acess recovery and cant mout sd card. Using last stable cm 10.
I think my sdcar is dead.
Same problem here. Around 8 out of 10 times I get stuck on the Google logo, 8 out of 10 times in recovery I can't mount SD card as well. And if I successfully boot, Media wakelocks and my battery drains in sleep as fast as if the screen were on. Please help.
For me I first noticed that my apps weren't using the SD partition. Tried to mount normally (fully loaded ROM) (ROM is SlimBean Beta2), but it would not mount. Went into CWM and tried to mount in there, but it would not work. tried to "Format /sdcard" but "Error mounting /sdcard". My phone still boots and runs fine, but I just don't have access to the SD partition. I don't want to do anything because I need my phone for business. Is there any PROVEN way to fix this yet?

[Q] Bricked Phone, and T-Mobile Replacement policy

I was running CM 10 and tried to flash the stock ROM. I flashed it fine (no errors in CWM, I also did clear the cache, dalvik, wiped system) after that I pressed reboot and nothing happened no Samsung just a black screen. I waited for around 10 minutes and then finally took out the battery. After that the phone wouldn't boot, recovery or download wouldn't work either. I tried everything I could and figured it's hard bricked. So if you have any suggestions on this they will be greatly appreciated. I still have my T-Mobile warranty, and the question I have is would they accept a phone that is rooted, but won't even boot so basically there is no way of finding out if it's rooted or not?
aanonymoushuman said:
I was running CM 10 and tried to flash the stock ROM. I flashed it fine (no errors in CWM, I also did clear the cache, dalvik, wiped system) after that I pressed reboot and nothing happened no Samsung just a black screen. I waited for around 10 minutes and then finally took out the battery. After that the phone wouldn't boot, recovery or download wouldn't work either. I tried everything I could and figured it's hard bricked. So if you have any suggestions on this they will be greatly appreciated. I still have my T-Mobile warranty, and the question I have is would they accept a phone that is rooted, but won't even boot so basically there is no way of finding out if it's rooted or not?
Click to expand...
Click to collapse
First error was you wiped system before reboot so there was nothing there to boot into... Leave the battery out for a bit then insert and boot into recovery.. reflash rom and this time only wipe cache and dalvik not system.. reboot.. Also how charged was the battery? maybe it is almost dead and needs charging!
Racing19969 said:
First error was you wiped system before reboot so there was nothing there to boot into... Leave the battery out for a bit then insert and boot into recovery.. reflash rom and this time only wipe cache and dalvik not system.. reboot.. Also how charged was the battery? maybe it is almost dead and needs charging!
Click to expand...
Click to collapse
I cant boot into anything at all... And the baterry was fine it was maybe at 60% when I flashed
aanonymoushuman said:
I cant boot into anything at all... And the baterry was fine it was maybe at 60% when I flashed
Click to expand...
Click to collapse
what rom were you flashing when this happened?? if it was a stock rom you should have been using odin.. unless it was one of the stock CWM flashable roms... if you can't get it going send me a pm.. I do JTAG repair
aanonymoushuman said:
I was running CM 10 and tried to flash the stock ROM. I flashed it fine (no errors in CWM, I also did clear the cache, dalvik, wiped system) after that I pressed reboot and nothing happened no Samsung just a black screen. I waited for around 10 minutes and then finally took out the battery. After that the phone wouldn't boot, recovery or download wouldn't work either. I tried everything I could and figured it's hard bricked. So if you have any suggestions on this they will be greatly appreciated. I still have my T-Mobile warranty, and the question I have is would they accept a phone that is rooted, but won't even boot so basically there is no way of finding out if it's rooted or not?
Click to expand...
Click to collapse
Wait... you wiped system after flashing stock...? That wiped the stock rom That's why nothing booted after the reboot.
I don't know why you can't get into download mode... When you plug in a usb when the battery is out does the phone vibrate? If not, try another usb cable. If that fails then you do have a hardware issue. If the phone vibrates hold vol + and vol - and power and reinsert battery-you should get download mode.
AFAIK, they (T-Mo) put the phone in download mode and check the flash counter. If it says anything other than "no" they will not accept it. Any odin flash adds to the flash counter.
anactoraaron said:
Wait... you wiped system after flashing stock...? That wiped the stock rom That's why nothing booted after the reboot.
I don't know why you can't get into download mode... When you plug in a usb when the battery is out does the phone vibrate? If not, try another usb cable. If that fails then you do have a hardware issue. If the phone vibrates hold vol + and vol - and power and reinsert battery-you should get download mode.
AFAIK, they (T-Mo) put the phone in download mode and check the flash counter. If it says anything other than "no" they will not accept it. Any odin flash adds to the flash counter.
Click to expand...
Click to collapse
As said before it's a brick, no screen, no vibration nothing. And I don't think T-Mo can even get to the phone unless they jtag it or something, which they will most likely not do as it will cause discomfort and timeloss to the customers (ME)
aanonymoushuman said:
As said before it's a brick, no screen, no vibration nothing. And I don't think T-Mo can even get to the phone unless they jtag it or something, which they will most likely not do as it will cause discomfort and timeloss to the customers (ME)
Click to expand...
Click to collapse
Well I doubt they can do that at the store (I don't have any confidence in the salespeople's tech ability there lol), so if you are under warranty just tell them that when you unplugged it this morning it was like that :laugh:
If it doesn't vibrate when plugged in and no battery installed then it sounds like a hard brick.
I think they do the manufacturer warranty as an exchange on the spot, so even if they do figure it out eventually you should be good.
But it would suck if they can get it into download mode at the store... better try numerous usb ports (even switch computers to be sure!) and cables to be sure Also wouldn't hurt to leave the battery out overnight and try again. If they get it in download mode... well two things. One they won't ever honor any warranty on the phone anymore (and they will give the phone back to you), but two... if they can get it in download mode have them leave it like that and rush back home - and then you're back in business
Kind of a win-win...
anactoraaron said:
Well I doubt they can do that at the store (I don't have any confidence in the salespeople's tech ability there lol), so if you are under warranty just tell them that when you unplugged it this morning it was like that :laugh:
If it doesn't vibrate when plugged in and no battery installed then it sounds like a hard brick.
I think they do the manufacturer warranty as an exchange on the spot, so even if they do figure it out eventually you should be good.
But it would suck if they can get it into download mode at the store... better try numerous usb ports (even switch computers to be sure!) and cables to be sure Also wouldn't hurt to leave the battery out overnight and try again. If they get it in download mode... well two things. One they won't ever honor any warranty on the phone anymore (and they will give the phone back to you), but two... if they can get it in download mode have them leave it like that and rush back home - and then you're back in business
Kind of a win-win...
Click to expand...
Click to collapse
I got a replacement going from T-Mobile, they just sent out the new phone today, but I'm confused do I send them my broken one right now? or wait till the new one comes?
They should have explained everything on the phone, they will send you a box to return it in . And if they find out that it has been rooted and modded , you could be charged the full price for the phone. Every time I sent the phone back I've always read it back to stock if yours was bricked hopefully they won't notice
Sent from my SAMSUNG-SGH-T769 using xda app-developers app

Power button broken, Unable to reset phone to return to verizon

Help!
My power button recently started giving me problems. It acts like it is stuck down. Any time I shut down the phone or pull the battery it automatically turned back on when the battery is inserted.
I have to return it for a warranty replacement to verizon and tried to enter custom recovery to backup/wipe but when I do this it just gets stuck in a boot loop because of the power button. Luckily I entered the fastbook/odin recovery and it cleared the bootloop and let me boot back into the phone.
My question is, how am I going to wipe my phone to return it to verizon (i am rooted/unlcoked) if I cannot access any kind of recovery? I also do not want to return this phone with any of my personal data on it.
Someone please help!
What happens when you boot into Download mode? Does it stay in download mode? Cuz you could just Odin flash a stock tar that wipes /sdcard and you'll be good as new to return to Verizon.
Sent from my SCH-I535 using Tapatalk 4
SlimSnoopOS said:
What happens when you boot into Download mode? Does it stay in download mode? Cuz you could just Odin flash a stock tar that wipes /sdcard and you'll be good as new to return to Verizon.
Sent from my SCH-I535 using Tapatalk 4
Click to expand...
Click to collapse
When I enter download mode (couldnt think of the name so i said odin/fastboot) it just reboots. The screen for download mode pops up then it reboots and if i dont hold down the buttons to enter download mode again it will boot like normal.
pickle3782 said:
When I enter download mode (couldnt think of the name so i said odin/fastboot) it just reboots. The screen for download mode pops up then it reboots and if i dont hold down the buttons to enter download mode again it will boot like normal.
Click to expand...
Click to collapse
The only thing I can suggest is Mobile Odin (in the Play Store). Download a stock tar that wipes /sdcard and see if it will take it.
SlimSnoopOS said:
The only thing I can suggest is Mobile Odin (in the Play Store). Download a stock tar that wipes /sdcard and see if it will take it.
Click to expand...
Click to collapse
Does mobile ODIN use its own recovery? I tried using TWRP Manager to do a backup, when it rebooted into recovery I got stuck in a boot loop. I am thinking if mobile odin somehow uses its own recovery or something that it might work. I will give it a try when i get home. Thanks.
I started having the same exact issue this weekend and am also currently waiting on a warranty replacement. However, I was able to get my phone to start working again after letting it set for a day, then apparently jamming the power button hard enough to make it work again. You might try that-- I know its not a very scientific or surefire way to make it work but who knows.
I'm also interested to see how many people have/have had/will have this problem.
blow into your power button. it might blow dust or wahtever is causing this to be moved out of the way.
Same thing has just happened to me. Also coincides with the camera not working at all. I took the phone apart, blew it down with compressed air and still a flaky power button with no camera. WTF is going on?
McLarenF17500 said:
I started having the same exact issue this weekend and am also currently waiting on a warranty replacement. However, I was able to get my phone to start working again after letting it set for a day, then apparently jamming the power button hard enough to make it work again. You might try that-- I know its not a very scientific or surefire way to make it work but who knows.
I'm also interested to see how many people have/have had/will have this problem.
Click to expand...
Click to collapse
How did you get your warranty replacement? Did you just call and they did some troubleshooting them said they would mail one to you?
I called and they wanted me to do a factory reset which i was not ready to do, then later found out i cant do.
How are you going to factory reset the phone if the power button is broken?
pickle3782 said:
How did you get your warranty replacement? Did you just call and they did some troubleshooting them said they would mail one to you?
I called and they wanted me to do a factory reset which i was not ready to do, then later found out i cant do.
How are you going to factory reset the phone if the power button is broken?
Click to expand...
Click to collapse
I took my phone in to Verizon on Saturday, and had a sales rep look at it and he then filled out the form to send me a replacement. My actual reason for going was to see if they knew of a local cell phone repair shop because I figured they would give me a "Your phone is out of its one year warranty so we can't do anything" runaround, but they simply shipped me a new one.
I since had gotten lucky and had the power button return to a working state, and I Odin'd a stock tar file onto it... And about an hour later the power button has failed again and this time seems to be for good. So my phone is in a usable state until I get my refurb. Hopefully you can get it to work, I definitely wouldn't give up on trying to get into download mode, it seemed like it just decided to work once after repeatedly trying so you might get lucky. I wish I could be of more help but I feel your pain.

Categories

Resources