Database Info

[Q] stuck at AT&A after flashed clean rom with odin, weird!!!

Hello,
I have weird problem with my Samsung captivate.
I install a new rom on my device and it work well for several hours but than it suddenly stop to work.
After a reset my device get stuck on the at&t screen.
I entered the download mode and flashed clean rom with odin (and check the Master Clear option).
But it still get stuck on the at&t screen.
Is this can be hardware problem?
Is there any way to get the log file from the boot to find out what is the problem?

Double post
Sent from my GT-I9000 using XDA Premium App

matsog said:
Hello,
I have weird problem with my Samsung captivate.
I install a new rom on my device and it work well for several hours but than it suddenly stop to work.
After a reset my device get stuck on the at&t screen.
I entered the download mode and flashed clean rom with odin (and check the Master Clear option).
But it still get stuck on the at&t screen.
Is this can be hardware problem?
Is there any way to get the log file from the boot to find out what is the problem?
Click to expand...
Click to collapse
If you can get in recovery, do a factory reset.
Also, you can reflash with Odin3 one click downloader. If you get the AT&T boot loop again, remove the battery, wait 5min.. and turn back on your phone.
Don't forget that after a flash it can take quite a while before the phone boots up as it has to rebuild his dalvik cache.

You can use UART to get the information.
Here's my setup. This is still a work in progress.

adam, i got some stuff to make those connectors but i think it's gonna have to wait till after finals. just a couple weeks and ill let you know if i have any luck.
the .008" endmills i need are $24 each, god forbid i break one! i can try a .010"endmill to keep the cost down(i found .010" endmills for about $10 from a different supplier). but then the contacts will be .005-.006" wide not .008" and are more likely to break and pull off the board in the process. im gonna try something else first, maybe it can still be done chemically if i'm carefull.
then you should have what you need to jtag the phone so you can test this more fully.

Dani, this is not the right topic, however thank you.

[Q] Won't even turn on...

Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!

tyler611 said:
Samsung Galaxy S 4g
Softbricked when I mistakenly loaded the vibrant rom. I have been reading for hours on how to fix this. After dozens of tries I found the guide for loading (with odin) T959UVKA6_REV05_home_low_CL860813.
I did have re-partition checked when I probably shouldn't have. I was trying to load s1_odin_20100512.pit as well. Odin said the process was successfully run but when I tried to reboot my phone nothing happened. I can't get it to even boot to the download screen.
I've tried every combo in the book (including remove battery, plug in USB, hold volume up/down, replace battery). I've left the battery out for as long as 10 minutes too (excessive, I know) That worked at least a dozen times before but now my screen won't even start up.
HELP! What do I do?!
Click to expand...
Click to collapse
Wow... Dude... You are offically bricked. Samsung can only help now.
Not trying to be negative, but you really shouldve read the instructions!
:-(
Sent from my SGH-T959V using XDA Premium App

I think I am in exactly the same boat as the OP. What is the best way to resolve this? Bring it into T-Mobile? Send it in to Samsung somehow? Is there a number to call for warranty repair or something?

Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App

stephen_w said:
Sometimes ODIN will still see the phone even when the screen is totally black. If ODIN can still see it, you can reflash a good ROM ~ get it going again.
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
I did the same thing as the OP. ODIN wouldn't recognize the phone. Ended up letting it sit overnight and then ODIN worked.
If you are flashing ROMs you should probably get a jig.
This guy is a forum member and great to deal with. (can't post the link) go to mobile tech videos dot com

Leave the battery off for a few minutes. Try Odin 1.85 to see if it recognizes the phone
Sent from my T959 using xda premium

Please use the Q&A Forum for questions Thanks
Moving to Q&A

[Q] G2x stuck at LG logo/cannot access recovery

Hey all
Before anyone mentions that i should be searching around more, i would like to say that i've been on multiple threads and they all state the same thing (use NVflash to flash CWM and then boot into CWM but the solution did not work for me past flashing CWM and then trying to access recovery after) and i wasn't able to find one that had a similar problem as mine.
I have CWM flashed through NVflash and was running CM7.1 RC1. I took a screenshot with the 'shootme' app and proceeded to look at the gallery to make sure it came out okay. The gallery crashed and i was sent to the home screen. I swiped to a different homescreen when my phone froze halfway through the transition to the next screen. No combination of buttons/long presses were able to get me out of it so i went ahead and did a battery pull. So my dilemma is that now i'm stuck at the LG boot logo with no blue status bar under it. It freezes there and will not do anything every time i boot up. volume down+power does not give me access to recovery nor does any other button combo get me past the LG boot logo.
Are there any other methods i might be able to use like ADB or what not to get myself out of this situation? or at least into recovery? Any comments or suggestions would be greatly appreciated as i've been searching for hours with little help and my eyes are starting to get strained.

hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
If so.. do the nvflash again? Edit: Not sure if I would do this without getting further guidance tho..

schmit said:
hmmm.. I know it's a simple question, but I gotta ask.. are you holding the pwr and volume down button long enough? you have to keep holding it even after you see the LG screen.. Keep holding until you see the 2nd screen?
Click to expand...
Click to collapse
This. I remember when I boot looped my phone I had the problem of letting go of the volume key too early, you need to hold down volume and power from a totally powered off phone until recovery actually starts and you see the green "android" logo of CWM.
Try re-flashing CWM, NVFlash CAN fail. There is literally nothing you can do within the OS that will prevent recovery from working. Either you did something wrong somewhere along the recovery process or you discovered an entirely new problem with the phone. I'm going to hazard a guess and say it's the former.

Thanks for the response guys. I wish that it was the case of not holding the buttons long enough. I have tried numerous times with the buttons held down for a long period of time. I even held the combo down for almost 5 minutes a few times.
Every time i try to boot up, it won't go past the LG boot screen so i would pull the battery out and go through flashing CWM through NVflash again. I'm sure I'm not missing anything because everything goes through and gets sent to the phone successfully.
I did happen to run into a thread that was closely similar to mine but his method was to just keep reflashing CWM and the stock recovery back and forth every time it failed until it turned on. I might have to try that if i cannot figure out this problem out soon. Not being able to use this phone is killing me! heh.

I just joined your club. Wow this sucks.

So apparently this is a whole new problem that's been found? Every other help thread seems to point to using NVflash or remaking the partitions due to a bad flash using an O2x based file instead of G2x.
But none of those solutions come close to doing anything. There has been some people with the same problem as me but aren't proactive at all enough to get someone's attention, so i'm guessing this problem is getting pushed to the side with people just going about getting their phones replaces/buying new ones.
I did happen to run into a thread on paulobrien/modaco's forum that had people using NVflash to get out of any sticky situation like this. It just reverts everything back to the stock factory settings but with root. We cannot use this though because he hasn't built it to be compatible with our LGP999's because everything was built for their UK LGP990's. Maybe that's a start to getting this solution fixed?

I hate to say this, bit you might have to call t mobile and get a replacement. Flash back to stock recovery and they won't know you messed with anything.
Sent from my Nexus 5g using XDA Ultimate App

Don't send back....you'll get same defacement a battery pull go into nvflah and go back stock then flash nv flash fix pArtitions

As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.

Jduhb said:
As I have mentioned before, NVflash does NOT give me access to my recovery let alone solve anything else. NVflash DOES work and does sucessfully send both CWM and the stock recovery but when I try to boot into either of them, let alone just power on normally, it simply DOES NOT go past the LG boot screen. it just hangs there doing nothing at all until I pull the battery out and do the same process over until it just hangs again.
while it is on/stuck at the LG screen, my computer does not recognize it so i cannot even try and run ADB commands. It does however, recognize it when I plug it in using the volume buttons held down when I use NVflash but there's nothing else I can do besides use NVflash obviously.
Click to expand...
Click to collapse
Did you ever find a solution to this issue? Because my phone is doing this...
I attempted to restore my phone back to the wrong backup that was from a galaxy sII (2.3.4 i think); needless to say, the restore failed. I then restarted my phone from CWM and it gets stuck at LG screen.
I have tried to NVflash back to stock; nothing. same thing reflashing back to CWM.
ideas?

have you tried this link out yet?
http://forum.xda-developers.com/showthread.php?t=1180331

same problem..... anybody find something to fix this yet?

From what I heard is that you need to remove the battery, then boot into recovery or something.
Sent from my G2X

Use smartflash for the p990 but only use the p999 ap.bin file which will put the rom and kernel back to stock p999.

Rom for recovery always fixes any soft brick back to stock 2.3.3 OTA. It's saved my phone multiple times from stuck on S/W screen to being stuck on lg logo or even the dreaded can't mount sdcard-cache errors in cwm.
Sent from my LG-P999 using xda premium

I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229

jcbofkc said:
I used the following method when Clockworkmod became corrupted and was unable to mount my sd card. I had just wiped everything on my phone intending to install a new rom when the issue happened. I could not even get to the S/W upgrade screen. It saved my phone. Hope it works for you.
http://forum.xda-developers.com/showthread.php?p=17258229
Click to expand...
Click to collapse
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!

sabotage99 said:
omg thank you so much! It worked! Not only that but i was stuck on frodo 2.2.2 before which is why i was messing with my phone in the first place and now its on gingerbread. Awesome! thank you!!!!
Click to expand...
Click to collapse
Glad for you that it worked.
Kwes1020 pointed me in the right direction last week. Be sure to give a thanks to ILUHA_89 who came up with the fix.

Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.

d12unk13astard said:
Amazing how people are soo lost without providing them link after link to other threads. They are soo lazy and can't follow simple directions, each time i get a new phone i go to that section on xda and soak up all the information as it usually is already there. It's just funny is all i guess.
Click to expand...
Click to collapse
It's really not that big a deal. I was brand new to android once and asked all sorts of things.
I, like you, happen to read everything I can get my hands on. Some struggle going through all the info. I was here the day the forum opened, so I kind of remember where everything is.
Some are lazy and others just have no idea what the heck is going on and are intimidated by certain processes. I would rather help someone instead of listening to them ***** about their broken phone.

Samsung looping

phone is on infused v2 and is now just looping after i restarted it, samsung samsung samsung.... how to fix this?

aviationmech406 said:
phone is on infused v2 and is now just looping after i restarted it, samsung samsung samsung.... how to fix this?
Click to expand...
Click to collapse
Have you tried anything to fix this......??
if not just pull batt, hold power and both volume up/down at the same time....when the first samsung logo appears let go of power and continue to hold till you get into recovery. should be like 10 sec maybe 15
wipe data factory reset and you should boot past the loop....if not you most likely have to reflash or use the ultimate unbrick.

mine did this when i deleted the lagfix folder by accident (trying to fee up space) i ended up booting into red recovery and disabling voodo lagfix, rebooted then went back in to recovery and re enabled it.

Im not able to get the recovery to come up, everything is jacked, im trying to track down instructions for that ultimate unbrick..
Ok found this http://forum.xda-developers.com/showthread.php?t=1116251&highlight=unbrick but the part where it says make sure your phone is com## in the odin, mine isnt showing up with that?

aviationmech406 said:
Im not able to get the recovery to come up, everything is jacked, im trying to track down instructions for that ultimate unbrick..
Ok found this http://forum.xda-developers.com/showthread.php?t=1116251&highlight=unbrick but the part where it says make sure your phone is com## in the odin, mine isnt showing up with that?
Click to expand...
Click to collapse
Did you get this working? When I was running Infused I had to repeatedly do battery pulls and the three button meth. to get the recovery. Should seriously try to get recovery to start before doing a back to stock.
As for Odin recognizing the phone, did you make sure you have the kies with the drivers installed, did you try different usb ports and/or computers caus sometimes the drivers act funky. Have seen other people have problems with Odin and the drivers.

Got odin to work and its back to stock, only problem i have now is when the date/time is set to automatic it sends it completely off the grid, i have to manually set it which i dont like to do, any quick fix to this?

I'm having a similar problem. My phone is bootlooping and my pc and odin are recognizing it, however the issue is that the phone only turns on for half a second before shutting back off, not allowing me to do anything with it. Anyone know of a way to fix this?

aviationmech406 said:
Got odin to work and its back to stock, only problem i have now is when the date/time is set to automatic it sends it completely off the grid, i have to manually set it which i dont like to do, any quick fix to this?
Click to expand...
Click to collapse
Even on stock? Ive seen this problem with custom roms like dlevrom 5.0 but not on stock? Cruise over there and see what he did to fix it. I believe there is a program called fastfix to force the locales to show up with North America. Nevertheless, check your locale and text in settings to make sure if the correct locale for your area is shown. If not there is a program in the market to force the correct one. Sorry, dont recall the programs name. Maybe the fastfix or fasterfix.
Sent from my SAMSUNG-SGH-I997 using XDA App

Astirnon said:
I'm having a similar problem. My phone is bootlooping and my pc and odin are recognizing it, however the issue is that the phone only turns on for half a second before shutting back off, not allowing me to do anything with it. Anyone know of a way to fix this?
Click to expand...
Click to collapse
Go to either the thread on the Heimdall one click back to stock or the thread on the Unbrickable mod, read up on your download mode access problem and figure which direction to go. Sounds like a soft brick but anything other than a black screen period is salvagable so your all good.
Sent from my SAMSUNG-SGH-I997 using XDA App

Pull battery plug in USB cable hold volume s power buttons insert battery should put you at download screen to odin to stock.
Sent from my SAMSUNG-SGH-I997 using XDA App

JLR9914 said:
Go to either the thread on the Heimdall one click back to stock or the thread on the Unbrickable mod, read up on your download mode access problem and figure which direction to go. Sounds like a soft brick but anything other than a black screen period is salvagable so your all good.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
Ok I did both, Odin had a different "modem" I guess so my time was off, I tried the heimdall one and it gave me the gingerbread update which is nice but im having a problem I turn on phone after and after the Samsung comes on it does this sketchy screen with a lot of colors then boots into "atts rethink possible" not sure if anyone can help with that.

aviationmech406 said:
Ok I did both, Odin had a different "modem" I guess so my time was off, I tried the heimdall one and it gave me the gingerbread update which is nice but im having a problem I turn on phone after and after the Samsung comes on it does this sketchy screen with a lot of colors then boots into "atts rethink possible" not sure if anyone can help with that.
Click to expand...
Click to collapse
Sounds like the rainbow thing peeps were getting when they used gb leaks with the froyo bootloaders? You are still booting up fine so that is good. Head over to one of the leaks like UCKJ2 or 4 and study first because the gb bootloaders might solve your rainbow but they are to be used with caution, you could brick your phone real quick.
Sent from my SAMSUNG-SGH-I997 using XDA App

Mightve bricked my P5113

Hi, i tried updating my tab to the leaked 4.1 OTA and after following the instructions my tab wont boot. It will only play the boot animation then hang at the samsung logo for about ten minutes then go black. I cant get it into download or recovery mode, but when i plug it into the wall it shows the battery icon. Also odin recognises the tab while its hanging at the samsung logo.. i have heard talk of a usb jig but not for this tablet.. Can anyone offer any advice? thanks in advance

If Odin sees it a USB jig isn't needed.. Just flash the stock f/w tar and you're good
EDIT: fail... No download mode... Umm... Sounds like you're in a bootloop... No idea why recovery and download wouldnt work tho...
Sent from my XT907 using Tapatalk 2

HulianMango said:
Hi, i tried updating my tab to the leaked 4.1 OTA and after following the instructions my tab wont boot. It will only play the boot animation then hang at the samsung logo for about ten minutes then go black. I cant get it into download or recovery mode, but when i plug it into the wall it shows the battery icon. Also odin recognises the tab while its hanging at the samsung logo.. i have heard talk of a usb jig but not for this tablet.. Can anyone offer any advice? thanks in advance
Click to expand...
Click to collapse
The good news is that the device probably isn't bricked. If it was unfixably bricked you shouldn't even see the boot animation.
It's figuring out how to fix it that's the hard part.
What you've clearly done as far as the ROM though is installed the rom improperly somehow. Might have missed as step in the process, or the ROM could have just been a bad download and no fault of your own. These things happen to the best of us.
Assuming that clockworkmod recovery is still installed, and you just can't get into it, you might try to see if you can access it using adb from your computer.
If you have abd installed boot the device as far as it'll go then see if you can connect to it with adb and run this command...
abd reboot recovery
Also try
adb reboot boot loader
If you don't have adb installed read this...
http://forum.xda-developers.com/showthread.php?t=1853159
If that doesn't work (and I only give it a 50-50 shot at best as adb isn't always useful during the boot process, which is where you are stuck....then we'll think of something else.
Also please describe the steps you are using to try and get into recovery just to make sure you're trying it the right way.
And after it gets stuck at the Samsung screen are you turning it off completely by holding the power, volume up, and volume down all at once? That should shut the device off completely, which is where you need to be before trying to boot into recovery.

Thank you both! ! I managed to get it going
Sent from my GT-P5113 using xda app-developers app

HulianMango said:
Thank you both! ! I managed to get it going
Sent from my GT-P5113 using xda app-developers app
Click to expand...
Click to collapse
Please share how you got it fixed and what ended up working.
That way when someone else Google's the same probelm a year from now and finds this thread, he'll have the answer waiting for him. (See my signature cartoon from XKDC.com for a comical represensation of why not explaining what the outcome was is annoying)
Glad it got working!

Well i asked in the thread for that rom and it was suggested that the battery needed charging, I didnt think this was the case cuz my tab had been plugged in to the wall for about an hour already but I let it sit for a couple hours and it finally booted although it said there was 15% power left... its still charging really slow but it boots now!
Sent from my GT-P5113 using xda app-developers app