Database Info

LG Optimus Me P350 stuck in emergency mode

Hello! I tried to update my LG Optimus Me P350 with KDZ Update tool, but the update was unsuccesfull and now the phone is stuck in emergency mode. I can't use any combination of buttons, even when i connect to my pc, this thing remain stuck in emergency mode. What can I do?

Same for me :-(

I found a solution and it's working:
1.Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/KDZ_FW_UPD_EN.html
2.Install msxml.msi from the uncompressed directory
3.Charge your battery to almost full state (I'm not sure, but it can be reason if phone doesn't start)
4.Turn phone off somehow (remove battery etc.)
5.Install drivers properly•Get rid of all usb drivers like Nokia, microsoft visual ++ run time environments
•Install the LG drivers by selecting the update manager from the lg site
•Disable LGE Virtual Modem. In your Windows operating system, go to Control Panel > System > Hardware > Device Manager > Modems > Right click on LGE Virtual Modem and click Disable.
6.Press and keep pressed "Volume up"+"Return" and connect USB cable to phone
7.Yellow screen with text emergency mode should appeared
8.Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
9.Run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that CDMA mod works too)
Select PhoneMode : DIAG (in case of fail try EMERGENCY, and as last chance use CS_EMERGENCY)
10.I Recommend do not switch phone off. There was some people, which done it and after they were not be able to turn it on again. If flashing failed, just select some another mode and try it again, again, try shake/connect disconnect, again, again....
11.In KDZ file : Choose the ROM file you downloaded in the first step
12.Press Launch software update
13.Shake the handset (I know, it sounds ... strange, but it helps for ones, so... why don't try it?) UPDATE: Read some quotes on bottom.
14.Make sure that all update was done successfully. Phone should restart itself automatically
15.Disconnect the USB cable from the phone
16.Press the three button combo for HW reset of device i.e volume up + home + power button
KDZ firmware for LG Optimus Me P350:
LG Optimus Me Official Firmwares V10C Download
•[ASEABK] http://csmg.lgmobile.com:9002/LGP350/V10c_00/V10C_00.kdz
LG Optimus Me Firmwares V10E Download:
•[ACISSV] http://depositfiles.com/en/files/4y603iksc
•[ABALSV] http://depositfiles.com/en/files/4vh72o8kn
LG Optimus Me Official Firmwares V10F Download:
•[ACISSV] http://csmg.lgmobile.com:9002/LGP350/V10F_00/V10F_00.kdz
•[ABALSV] http://csmg.lgmobile.com:9002/LGP350/V10F_00/V10F_00.kdz
LG Optimus Me Flasher Tools Download:
•B2C: http://csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
•KDZ FW Updater: http://www.unclenet.de/files/KDZ_FW_UPD_EN.7z

What i did my phone is i reprogram it

That worked?

link for kdz flash file is not working can u plz update the link

[Q] LG p500 is not recognised by pc as phone.

Hi! I've got a problem with my phone: I want to go back to the original firmware with kdz updater, but it says ''phone not found''. My pc does not recognise lg p500 as a phone/smartphone but as a mass storage, usb composite device, disk drive, ADB single-sooner interface, etc...
I am running windows xp 32-bit.
I have installed all lg drivers, lg pc suite, etc.. but still no result. Please help!!!
Here's a log of kdz updater:
[R&D Test Tools Log File]
14:30:34 : Launching SW update
14:30:34 : Unpacking KDZ
14:31:04 : KDZ file extraced
14:31:11 : Files were extracted.
14:31:11 : LGMobileDL Load.
14:31:11 : Port = -1
14:31:11 : Connecting to phone
14:31:11 : PHONE WAS NOT FOUND!
14:31:13 : ===FINISHED===

Try these drivers.. disable lg modem in device manager while using kdz.

It didn't worked. I have disabled lg modem and i got the same message from kdz. Should i uninstall all other drivers (including pc suite) and install just the one you gave me?
EDIT: when i first plug it in (without ANY drivers) it is recognised by pc as lg-p500 but after installing drivers it is recognised as other things (i have mentioned ''the things'' in the first post).

Guess you can get some help from this thread...
forum.xda-developers.com/showthread.php?t=1827723
Sent via O1 running PA 2.52 by Bytecode.

I finally got it!!! It seems that lg drivers for lg p500 only support gingerbread os, not higher. So i have installed a gb android version, I installed the drivers using lg support app and suddenly: Found new hardware:
LGE android platform
I tried to install original firmware using kdz updater and..........IT WORKED!!!
I am so happy!!! So remember: IF YOU WANT TO INSTALL ORIGINAL FIRMWARE ON YOUR BELOVED LG P500 YOU SHOULD FIRST INSTALL A GB CUSTOM ROM!!!

Same problem happens with bluetooth too. when i pair phone to laptop it shows as unknown device. But if i install gb rom and then pair it shows up as phone.

Working download link for stock Firmware India LG P 500

Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500

here we go...
[email protected] said:
Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
Click to expand...
Click to collapse
Code:
USING KDZ IS SKILLFULL ART AND IMPROPER USE CAN LEAD TO PERMENENT HARD BRICKED PHONE
Someone sad that following worked, someone that not. You must try and you will see...
1) Get serial number of your phone
2) Enter it in URL csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=[COLOR=Red]LGP500[/COLOR]&esn=[COLOR=Red]000KPPB001234[/COLOR]
3) Show page that you get in source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='check_model' status='ok'>
<auth>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<esn>[COLOR=Red]123456789012345[/COLOR]</esn>
<msn>000KPPB001234</msn>
<esndate>20101201</esndate>
<buyer>SEA</buyer>
<esnoutgodate>20101203</esnoutgodate>
<ULocationcode>N</ULocationcode>
<buyername>HUB</buyername>
<csn>LG0000440022331</csn>
</auth> </response>
4) select & copy number between <esn> elements (123456789012345)
5) Enter this number to csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
If it won't work, you can try new link provided by kutysam (make thanks him on some of his post please)
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
6) Show page as source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>123456789012345</esn>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<msn>000KPPB001234</msn>
<esn_date>20101201</esn_date>
<sw_version>V10E_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz</sw_url>
<sw_locale_url>[B]http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz[/B]</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Here u will get url for firmware package (~117 mb)
download it on pc .
How To Flash With KDZ
1. Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/
KDZ_FW_UPD_EN.html
2. Install msxml.msi from the uncompressed
directory
3. Charge your battery to almost full state (I'm
not sure, but it can be reason if phone
doesn't start)
4. Turn phone off somehow (remove battery
etc.)
5. Install drivers properly
Get rid of all usb drivers like Nokia,
microsoft visual ++ run time environments
Install the LG drivers by selecting the update
manager from the lg site
Disable LGE Virtual Modem. In your Windows
operating system, go to Control Panel >
System > Hardware > Device Manager >
Modems > Right click on LGE Virtual Modem
and click Disable.
6. Enter emergency mode and connect ur device with USB cable to PC.
7. Yellow screen with text emergency mode
should appeared
8.Btw use good quality stock usb cable.
9.run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that
CDMA mod works too )
Select PhoneMode : DIAG (in case of fail try
EMERGENCY, and as last chance use
CS_EMERGENCY)
10. I Recommend do not switch phone off. There
was some people, which done it and after
they were not be able to turn it on again. If
flashing failed, just select some another
mode and try it again, again, try shake/
connect disconnect, again, again....
11. In KDZ file : Choose the ROM file you
downloaded in the first step
12. Press Launch software update
13. If it fails , try again and again and again till you get success !
14. Make sure that all update was done
successfully. Phone should restart itself
automatically
15. Disconnect the USB cable from the phone
16. Press the three button combo for HW reset
of device i.e volume up + home + power
button
U r done !!!
If you get success , add [SOLVED] as prefix to this thread name.
&
Hit Thanks for @The_ERROR (Original source for KDZ links) @GPadmanabh

How to take your imei back [mtk] tested!!

HII THERE !!
DID U LOST YOUR IMEI WHILE FLASHING ? FORMATTING ?
HERE IS SOLUTION FOR ALL THIS FUSS
REQUIREMENTS :
WINDOWS
CDC DRIVERS
MOBILE DRIVERS
MIUI META 3G (TORRENT)
USB CABLE
BRAIN
PATIENCE
COFFEE (OPTIONAL)
STEPS TO BE FOLLOWED :
STEP 1 :
INSTALLING CDC DRIVERS :
1.DOWNLOAD CDC DRIVERS FROM HYPERLINKS IN REQUIREMENTS
2. IF YOU ARE ON XP THEN REFER THIS LINK : http://forum.gsmhosting.com/vbb/f723/install-andriod-cdc-driver-andrid-imei-mtk-debug-modem-1636173/
IF YOU ARE ON WINDOWS 7 ,8 ,8.1 THEN : http://forum.xda-developers.com/and...installing-cdc-drivers-windows-8-tut-t3001353
3.OPEN MIUI META 3G
4.GOTO OPTION AND SELECT CONNECT SMART PHONE IN META MODE
5. CONNECT UR PHONE IS SWITCHED OF STATE AND WAIT FOR MIUI META TO BE RECOGNIZE IT ....
6.AFTER IT IS CONNECTED OPEN IMEI DOWNLOAD FROM DROPDOWN BESIDE USB COM OPTION
7.IMEI DOWNLOAD WILL OPEN U NEED TO CHANGE NVRAM DATABASE WHICH IS INCLUDED IN UR FIRMWARE U CAN GOOGLE AND FIND IT
8. ENTER YOUR IMEI AND LAST DIGIT (CHECKSUM IS LAST DIGIT )WILL BE RECOGNIZED AUTOMATICALLY DONT CHANGE ANYTHING
9.CLICK ON DOWNLOAD TO FLASH AND YOU ARE DONT
THANKS FOR READING THIS TUTORIAL
DOWNLOAD ATTACHMENT EXPLAINED WITH SCREENSHOT

Samsung Galaxy S8 + SM - GF955F/FD INS

I can't able to flash with odin . I have tried all options like changing USB cable / USB port / other odin version .
Odin shows : Can't open the serial (COM) PORT
complete write failure
In download mode : SV .REV .Check fail (Bootloader ) Device 11, Binary 4.
My device is not in development mode - OEM / USB debugging - Disabled

VIJIKRISHNA said:
I can't able to flash with odin . I have tried all options like changing USB cable / USB port / other odin version .
Odin shows : Can't open the serial (COM) PORT
complete write failure
In download mode : SV .REV .Check fail (Bootloader ) Device 11, Binary 4.
My device is not in development mode - OEM / USB debugging - Disabled
Click to expand...
Click to collapse
Kindly help me to come out of this issues

You must complete the all four binary needed not only ap buat all of them