Database Info

[Q] Downgrade LG P500 to Telus 2.2

I tried to downgrade LG P500 from 2.2.1 to 2.2 by following these steps.
Install msxml.msi from the uncompressed directory
Conect your device (do not turn on disk storage) and run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT
Select PhoneMode : DIAG
In KDZ file : Choose the ROM file you downloaded (V10G_00.kdz file)
Press Launch software update and wait (It will be 10 minutes or so). In your phone it will appear "Emergency mode". Wait until it reboots.
The phone never rebooted. When I manually try to reboot, it comes to Android screen and never gets past it. Has anyone faced this issue?
Thanks.

FIRST TRY TO PRESS THE POWER BUTTON FR FEW SECONDS WHEN ITS SHOWING THE ANDROID SCREEN IF IT LOAD STHEN ITS FINE ORELSE TRY THIS
IT does happen so in order to get it working make sure that u have enable usb debugginng and disable lg modem driver .
Restart ur pc
hold volume up and home button and connect to ur pc via usb
flash using kdz flasher choosing your rom file in diag/emergency/cs emergency(any 1)option
after it succeed flashing it will show battery getting charged but it never turns on on its own so manualy turn on the mobile.
Note : Do not disconnect usb from pc till the android loads up in ur mobile
if all doent work just gv it back to service they will get it repaired

[Q] Unable to install Driver Software LG ME p350. Any solution for this?

Hi guys, first of, i want to thank the one who made the thread on how to uninstall SuperUSer using terminal apk with codes.
that was my 1st problem on how to remove that SU. 2nd is on how to reflash my LM me p350 software.
i followed the instructions.
How to flash LG Optimus Me Steps:
1. Install the USB drivers and LG B2C Tools
2. Unzip KDZ_FW_UPD_EN.7z and installed msxml.msi
3) Shut down the LG Optimus Me, remove the battery and connect the USB cable holding down the Volume Up button and wait until the drivers are installed (the phone should be on the "S/W upgrade Please wait" state while upgrading!!!!)
or
3′. Enable USB debugging and connect USB cable to your LG Optimus Me
4. Open your device manager and disabled under the Modem LGE Mobile USB Modem
5. Starts KDZ_FW_UPD.exe
6. In the Software Updater select "Type"=CDMA , "PhoneMode"=DIAG, and at "KDZ file" select the desired file. (The firmware .kdz file must have the name in this form!)
This will open "Read phone information" window. IN THAT WINDOW:
7. Click "Upgrade start". DO NOT CLICK ANYTHING ELSE BEFORE!
LG Updater launches…..
8. Select Country="Different country" (unless you are in Korea) and Language as you wish
LG Mobile Updater Launches………. warning you and asking your permission to continue..
9. Follow LG Mobile Updater instructions…
Let the tool running for a few minutes through and be pacient!!
ATTENTION!!
After the phone reboots first time, DO NOT UNPLUG USB CABLE!!!
WAIT!! Remove USB cable only after the log says that the flash was OK!
10. The flashing process is now finished.
i downloaded the V10F although mine is V10B Feb 22,2011.
i'm good to go, and i'm on #7, unpacking KDZ, and then Cannot find PHONE!
before that, when i plugged my phone and used usb debugging, there's now the big problem that's why the updater didnt detect the phone because of this : "Unable to install Driver Software".
How can i fix this problem, for me to flash my phone, i can't flash it if my PC/laptop can't detect my phone.
i would really appreciate a quick help. LG service center here is 4 hour road trip. back and forth hat would be 8 hours. so i'll ask for help first here. thanks.

Please some quick help about this, i've search about this but no clear guides we're given, i've installed the possible USB drivers for my PC laptop to read my LG me, but none of them worked.

Users lg optimus vu club

Optimus vu here to use..
Vu firmware
http://csmg.lgmobile.com:9002/LGF100L/ALGTBK/F100L29i_00/F100L29i_00.kdz
How to Flash the LG Optimus Vu
Procedure to flash LG Optimus Chic:
First of all you need to download Downloaded the original firmware from here.
Then download the firmware updating software KDZ_firmware_updater and extract it to a folder. Install msxml on your windows pc by double clicking it.
Charge the phone to the maximum.
Enable USB Debugging on Phone (Settings/Applications/Development/), connect your phone to PC and wait for drivers to install.
In the software window, select Type as 3GQCT
Select PhoneMode as DIAG
In the ‘KDZ file’ space, browse for the firmware you want to install. (In this case V10A_00.kdz)
Click “Launch software update”
The firmware flashing process is now underway. If all goes well, in 5-10 minutes the phone will be flashed with the new firmware.
After booting up fully, detach the phone from the pc.

And your point is?
Edit: Your edit justifies a thread

?
¿

Thread moved to its correct location.

Working download link for stock Firmware India LG P 500

Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500

here we go...
[email protected] said:
Model LG P 500
I have successfully put my phone on emergency mode so will give it a try to boot by flashing the stock Firmware couldn't find any Working download link for stock Firmware India...
Kindly share the instructions to boot it back and with the working download link....got fed up googling
LG P 500
Click to expand...
Click to collapse
Code:
USING KDZ IS SKILLFULL ART AND IMPROPER USE CAN LEAD TO PERMENENT HARD BRICKED PHONE
Someone sad that following worked, someone that not. You must try and you will see...
1) Get serial number of your phone
2) Enter it in URL csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=<model_of_phone>&esn=<serial_number>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?model=[COLOR=Red]LGP500[/COLOR]&esn=[COLOR=Red]000KPPB001234[/COLOR]
3) Show page that you get in source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='check_model' status='ok'>
<auth>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<esn>[COLOR=Red]123456789012345[/COLOR]</esn>
<msn>000KPPB001234</msn>
<esndate>20101201</esndate>
<buyer>SEA</buyer>
<esnoutgodate>20101203</esnoutgodate>
<ULocationcode>N</ULocationcode>
<buyername>HUB</buyername>
<csn>LG0000440022331</csn>
</auth> </response>
4) select & copy number between <esn> elements (123456789012345)
5) Enter this number to csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=<enter_esn_number_here>
Code:
csmg.lgmobile.com:9002/svc/popup/model_check.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
If it won't work, you can try new link provided by kutysam (make thanks him on some of his post please)
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=[COLOR=Red]123456789012345[/COLOR]
6) Show page as source-code view
Code:
<?xml version='1.0' encoding='utf-8' ?>
<response req_cmd='auth_model_check' status='OK'>
<auth_model_check>
<result>OK</result>
<esn>123456789012345</esn>
<model>LGP500</model>
<suffix>ASEABK</suffix>
<msn>000KPPB001234</msn>
<esn_date>20101201</esn_date>
<sw_version>V10E_00</sw_version>
<sw_url>http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz</sw_url>
<sw_locale_url>[B]http://csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10e_00/V10E_00.kdz[/B]</sw_locale_url>
<sw_recommand_uri>GLOBAL/GLOBAL</sw_recommand_uri>
<app_version></app_version>
<app_url></app_url>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>GSM</prod_type>
</auth_model_check> </response>
Here u will get url for firmware package (~117 mb)
download it on pc .
How To Flash With KDZ
1. Download KDZ updater and uncompress it
http://www.4shared.com/file/UleS4dP3/
KDZ_FW_UPD_EN.html
2. Install msxml.msi from the uncompressed
directory
3. Charge your battery to almost full state (I'm
not sure, but it can be reason if phone
doesn't start)
4. Turn phone off somehow (remove battery
etc.)
5. Install drivers properly
Get rid of all usb drivers like Nokia,
microsoft visual ++ run time environments
Install the LG drivers by selecting the update
manager from the lg site
Disable LGE Virtual Modem. In your Windows
operating system, go to Control Panel >
System > Hardware > Device Manager >
Modems > Right click on LGE Virtual Modem
and click Disable.
6. Enter emergency mode and connect ur device with USB cable to PC.
7. Yellow screen with text emergency mode
should appeared
8.Btw use good quality stock usb cable.
9.run KDZ_FW_UPD.exe (Has administrator).
Select Type : 3GQCT (I have one report that
CDMA mod works too )
Select PhoneMode : DIAG (in case of fail try
EMERGENCY, and as last chance use
CS_EMERGENCY)
10. I Recommend do not switch phone off. There
was some people, which done it and after
they were not be able to turn it on again. If
flashing failed, just select some another
mode and try it again, again, try shake/
connect disconnect, again, again....
11. In KDZ file : Choose the ROM file you
downloaded in the first step
12. Press Launch software update
13. If it fails , try again and again and again till you get success !
14. Make sure that all update was done
successfully. Phone should restart itself
automatically
15. Disconnect the USB cable from the phone
16. Press the three button combo for HW reset
of device i.e volume up + home + power
button
U r done !!!
If you get success , add [SOLVED] as prefix to this thread name.
&
Hit Thanks for @The_ERROR (Original source for KDZ links) @GPadmanabh

LG G Pro 2 F350L Recovery + Files

Hello all I am a long time listener and first time caller for this forum, this is my first post so I hope this is the place for it
This post will be about recovering your LG G Pro 2 model F350L using the LG flash tool and download mode on the phone.
I used LG Flash tools found here and the universal ADB driver here
First put the phone into download mode by holding the volume up button while inserting a factory cable into the port. In my case a factory kindle fire cable worked for me but your mileage may vary.
Then I ran the LG flash tools with the PhoneMode set to emergency and selecting the appropriate KDZ.
To wipe the phone completely and recover the phone (as I needed to) select CSE flash. I had a DLL file that supposedly accompanies the KDZ file for this, I am no expert on the theory here but I did get it to work for me (Reference Einstein theory v practice) and had the DLL in the same folder as the LG Flash tool .exe. The KDZ I just used from my downloads folder.
So Finally TL;DR version
1. Flash tool+Driver
2. Download mode+Cable
3. CSE Flash + files
4. You're a big kid now
F350L DLL FILE
F350L KDZ FILE